Modeling and Calculation of Impact Friction Caused by Corner Contact in Gear Transmission

Corner contact in gear pair causes vibration and noise,which has attracted many attentions.However,teeth errors and deformation make it difficulty to determine the point situated at corner contact and study the mechanism of teeth impact friction in the current researches.Based on the mechanism of corner contact,the process of corner contact is divided into two stages of impact and scratch,and the calculation model including gear equivalent error-combined deformation is established along the line of action.According to the distributive law,gear equivalent error is synthesized by base pitch error,normal backlash and tooth profile modification on the line of action.The combined tooth compliance of the first point lying in corner contact before the normal path is inversed along the line of action,on basis of the theory of engagement and the curve of tooth synthetic complianceload-history.Combined secondarily the equivalent error with the combined deflection,the position standard of the point situated at corner contact is probed.Then the impact positions and forces,from the beginning to the end during corner contact before the normal path,are calculated accurately.Due to the above results,the lash model during corner contact is founded,and the impact force and frictional coefficient are quantified.A numerical example is performed and the averaged impact friction coefficient based on the presented calculation method is validated.This research obtains the results which could be referenced to understand the complex mechanism of teeth impact friction and quantitative calculation of the friction force and coefficient,and to gear exact design for tribology.

A modified Kelvin impact model for pounding simulation of base-isolated building with adjacent structures

Base isolation can effectively reduce the seismic forces on a superstructure, particularly in lowto medium-rise buildings. However, under strong near-fault ground motions, pounding may occur at the isolation level between the baseisolated building （BIB） and its surrounding retaining walls. To effectively investigate the behavior of the BIB pounding with adjacent structures, after assessing some commonly used impact models, a modified Kelvin impact model is proposed in this paper. Relevant parameters in the modified Kelvin model are theoretically derived and numerically verified through a simple pounding case. At the same time, inelasticity of the isolated superstructure is introduced in order to accurately evaluate the potential damage to the superstructure caused by the pounding of the BIB with adjacent structures. The reliability of the modified Kelvin impact model is validated through numerical comparisons with other impact models. However, the difference between the numerical results from the various impact analytical models is not significant. Many numerical simulations of BIBs are conducted to investigate the influence of various design parameters and conditions on the peak inter-story drifts and floor accelerations during pounding. It is shown that pounding can substantially increase floor accelerations, especially at the ground floor where impacts occur. Higher modes of vibration are excited during poundings, increasing the inter-story drifts instead of keeping a nearly rigid-body motion of the superstructure. Furthermore, higher ductility demands can be imposed on lower floors of the superstructure. Moreover, impact stiffness seems to play a significant role in the acceleration response at the isolation level and the inter-story drifts of lower floors of the superstructure. Finally, the numerical results show that excessive flexibility of the isolation system used to minimize the floor accelerations may cause the BIB to be more susceptible to pounding under a limited seismic gap.

Impact failure models and application condition of trees in debris-flow hazard mitigation

Forestry has played an important role in hazard mitigation associated with debris flows.Most forest mitigation measures refer to the experience of soil and water conservation,which disregard the destructive effect of debris flows,causing potentially serious consequences.Determination of the effect of a forest on reducing debris-flow velocity and even stopping debris flows requires distinguishing between when the debris flow will destroy the forest and when the trees will withstand the debris-flow impact force.In this paper,we summarized two impact failure models of a single tree: stem breakage and overturning.The influences of different tree sizes characteristics(stem base diameter,tree weight,and root failure radius) and debris-flow characteristics(density,velocity,flow depth,and boulder diameter) on tree failure were analyzed.The observations obtained from the model adopted in this study show that trees are more prone to stem breakage than overturning.With an increase in tree size,the ability to resist stem breakage and overturning increases.Debris-flow density influences the critical failure conditions of trees substantially less than the debrisflow velocity,depth,and boulder diameter.The application conditions of forests in debris-flow hazard mitigation were proposed based on the analysis of the model results.The proposed models were applied in the Xiajijiehaizi Gully as a case study,and the results explain the destruction of trees in the forest dispersing zone.This work provides references for implementing forest measures for debris-flow hazard mitigation.

Stability of rat models of fluid percussion-induced traumatic brain injury: comparison of three different impact forces

Fluid percussion-induced traumatic brain injury models have been widely used in experimental research for years. In an experiment, the stability of impaction is inevitably affected by factors such as the appearance of liquid spikes. Management of impact pressure is a crucial factor that determines the stability of these models, and direction of impact control is another basic element. To improve experimental stability, we calculated a pressure curve by generating repeated impacts using a fluid percussion device at different pendulum angles. A stereotactic frame was used to control the direction of impact. We produced stable and reproducible models, including mild, moderate, and severe traumatic brain injury, using the MODEL01-B device at pendulum angles of 6°, 11° and 13°, with corresponding impact force values of 1.0 ± 0.11 atm（101.32 ± 11.16 k Pa）, 2.6 ± 0.16 atm（263.44 ± 16.21 k Pa）, and 3.6 ± 0.16 atm（364.77 ± 16.21 k Pa）, respectively. Behavioral tests, hematoxylin-eosin staining, and magnetic resonance imaging revealed that models for different degrees of injury were consistent with the clinical properties of mild, moderate, and severe craniocerebral injuries. Using this method, we established fluid percussion models for different degrees of injury and stabilized pathological features based on precise power and direction control.

Dynamic Modeling of Variable Stiffness and Damping for Spatial Linkage Weft Insertion Mechanism with Clearance

In order to further analyze the influence of clearance on the kinematic performance of spatial linkage weft insertion mechanism,it is necessary to study the dynamic characteristics of contact impact force model with the variable stiffness and damping coefficient.Firstly,the parameters in the output process of the system are solved by describing of the flexible joint clearance.Then,based on Lankarani-Nikravesh contact force model,the contact impact stiffness and damping coefficient is modified from fixed values to time-varying coefficients.The dynamic model of spatial linkage weft insertion mechanism with modified clearance is established by Lagrange method,and the dynamic characteristics of the system are calculated.The results show that the joint clearance can directly affect the output performance of the mechanism.With the increase of the clearance value,the curve fluctuations of acceleration,driving torque and collision force are obvious,and it will be further intensified with the increase of spindle speed,which greatly affects the stability of mechanism and fabric quality.Finally,the virtual prototype is established by the SolidWorks software and simulated by the ADAMS software.The simulation results are compared with the numerical results,which verifies the accuracy of the modeling method in this paper.

An Impact of Hydrostatic Extraction Scheme on BMRC's Global Spectral Model

There are two important features in geophysical fluid dynamics. One is that the atmospheric and oceanic equations of motion include the Coriolis force; another is that they describe a stratified fluid. The hydrostatic extraction scheme, or standard stratification approximation, posed by Zeng (1979), reflects the second aspect of geophysical fluid dynamics. There exist two major advantages in this scheme; accurate computation of the pressure gradient force can be obtained over steep mountain slopes, and the accumulation error in vertical finite differencing can be reduced, especially near the tropopause.Chen et al (1987) introduced the hydrostatic extraction scheme into a global spectral model, which attained preliminary success at low resolution. Zhang and Sheng et al (1990) developed and improved the hydrostatic extraction scheme in a global spectral model, in which C0, the parameter that represents the stratification of the reference atmosphere, changes not only with height, but also with latitude. The scheme has been incorporated BMRC's global spectral model (IAPB). Four 5-day forecasts have been performed to test the IAPB with the hydrostatic extraction scheme. Objective verifications demonstrate a positive effect of the hydrostatic extration scheme on BMRC's model, particularly at upper levels, over the tropics and the Antartic region.

Urolithin A alleviates blood-brain barrier disruption and attenuates neuronal apoptosis following traumatic brain injury in mice

Urolithin A(UA)is a natural metabolite produced from polyphenolics in foods such as pomegranates,berries,and nuts.UA is neuroprotective against Parkinson’s disease,Alzheimer’s disease,and cerebral hemorrhage.However,its effect against traumatic brain injury remains unknown.In this study,we established adult C57BL/6J mouse models of traumatic brain injury by controlled cortical impact and then intraperitoneally administered UA.We found that UA greatly reduced brain edema;increased the expression of tight junction proteins in injured cortex;increased the immunopositivity of two neuronal autophagy markers,microtubule-associated protein 1A/B light chain 3A/B(LC3)and p62;downregulated protein kinase B(Akt)and mammalian target of rapamycin(mTOR),two regulators of the phosphatidylinositol 3-kinase(PI3K)/Akt/mTOR signaling pathway;decreased the phosphorylation levels of inhibitor of NFκB(IκB)kinase alpha(IKKα)and nuclear factor kappa B(NFκB),two regulators of the neuroinflammation-related Akt/IKK/NFκB signaling pathway;reduced blood-brain barrier permeability and neuronal apoptosis in injured cortex;and improved mouse neurological function.These findings suggest that UA may be a candidate drug for the treatment of traumatic brain injury,and its neuroprotective effects may be mediated by inhibition of the PI3K/Akt/mTOR and Akt/IKK/NFκB signaling pathways,thus reducing neuroinflammation and enhancing autophagy.

Assessing the impact on groundwater safety of inter-basin water transfer using a coupled modeling approach

Surface water and groundwater always behave in a coupled manner and are major components of hydrologic cycle. However, surface water simulation models and groundwater simulation models are run separately most of the time. Few models focus on the impact of hydraulic changes in the surface water flows on the groundwater, or specifically, the impact of a water transfer project to fill a seasonally dry channel. In this study, a linked surface water and groundwater simulation model was developed to assess the impact of a trans-basin water diversion project on the groundwater. A typical plain area east of Beijing was selected as a case study, representing Beijing＇s main source of groundwater used for drinking water. A surface water quality model of the Chaobai River was developed based on the Water Quality Analysis Simulation Program （WASP）, and a groundwater model was developed based on the Modular Finite- Difference Groundwater Flow Model （MODFLOW） and the Modular 3-D transport model （MT3D）. The results of the surface water simulation were used as input for the groundwater simulation. Water levels and four contaminants （NH3-N, CODMn, F, As） were simulated. With the same initial and boundary conditions, scenario analyses were performed to quantify the impact of different quantities of diversion water on the groundwater environment. The results showed the water quality of the groundwater sources was not significantly affected.

Incorporating shape constraints in generalized additive modelling of the height-diameter relationship for Norway spruce

Background： Measurements of tree heights and diameters are essential in forest assessment and modelling. Tree heights are used for estimating timber volume, site index and other important variables related to forest growth and yield, succession and carbon budget models. However, the diameter at breast height （dbh） can be more accurately obtained and at lower cost, than total tree height. Hence, generalized height-diameter （h-d） models that predict tree height from dbh, age and other covariates are needed. For a more flexible but biologically plausible estimation of covariate effects we use shape constrained generalized additive models as an extension of existing h-d model approaches. We use causal site parameters such as index of aridity to enhance the generality and causality of the models and to enable predictions under projected changeable climatic conditions. Methods： We develop unconstrained generalized additive models （GAM） and shape constrained generalized additive models （SCAM） for investigating the possible effects of tree-specific parameters such as tree age, relative diameter at breast height, and site-specific parameters such as index of aridity and sum of daily mean temperature during vegetation period, on the h-d relationship of forests in Lower Saxony, Germany. Results： Some of the derived effects, e.g. effects of age, index of aridity and sum of daily mean temperature have significantly non-linear pattern. The need for using SCAM results from the fact that some of the model effects show partially implausible patterns especially at the boundaries of data ranges. The derived model predicts monotonically increasing levels of tree height with increasing age and temperature sum and decreasing aridity and social rank of a tree within a stand, The definition of constraints leads only to marginal or minor decline in the model statistics like AIC An observed structured spatial trend in tree height is modelled via 2-dimensional surface fitting. Conclusions： We demonstrate that the SCAM approach allows optimal regression modelling flexibility similar to the standard GAM but with the additional possibility of defining specific constraints for the model effects. The longitudinal character of the model allows for tree height imputation for the current status of forests but also for future tree height prediction.

GIS and L-THIA Based Analysis on Variations of Non-point Pollution in Nansi Lake Basin,China

Non-point source(NPS) pollution is the main threat to regional water quality,and the estimation of NPS pollution load has become an important task for NPS pollution control in China.Combined with geographical information system(CIS),the longterm hydrologic impact assessment(L-THIA) model was used to evaluate the temporal-spatial changes of chemical oxygen demand(COD),total nitrogen(TN) and total phosphorus(TP) in Nansi Lake basin from 2000 to 2010.The results show:1) the estimated COD,TN and TP loads in 2010 are260017.5,111607.7 and 6372.0 t with the relative errors of 2.1%,2.0%and-8.8%respectively,and more than 90%concentrated in the raining period from June to September;2) cultivated land and construction land take up more than 80%of the whole Nansi Lake basin,and the proportions of the three kinds of NPS pollution loads coming from cultivated land and construction land are more than 98%;3) during 2000-2010,the COD,TN and TP loads increase by 8801.6,180.3 and 71.9 t respectively,and become the main impact factors on the water quality of Nansi Lake.

PARAMETRIC MATCHING SELECTION OF MULTI-MEDIUM COUPLING SHOCK ABSORBER

To achieve the dual demand of resisting violent impact and attenuating vibration in vibration-impact-safety of protection for precision equipment such as MEMS packaging system, a theo- retical mathematical model of multi-medium coupling shock absorber is presented. The coupling of quadratic damping, linear damping, Coulomb damping and nonlinear spring are considered in the model. The approximate theoretical calculating formulae are deduced by introducing transformation-tactics. The contrasts between the analytical results and numerical integration results are developed. The resisting impact characteristics of the model are also analyzed in progress. In the meantime, the optimum model of the parameters matching selection for design of the shock absorber is built. The example design is illustrated to confirm the validity of the modeling method and the theoretical solution.

Assessment of the macro-economic impacts of low-carbon road transportation policies in Chongqing,China

Reductions in the transportation sector's carbon dioxide emissions are increasingly of global concern.As one of the first low-carbon pilot and carbon trading pilot cities,and as one of the largest automobile production bases in China,Chongqing has multiple low-carbon transportation policies that are coupled.In this study,three policy scenarios are set,including:1)improving the fuel economy of newly sold gasoline passenger cars to 5.71 per 100 km by 2020,2)promoting pure electric private cars to increase the share to 7% of private car sales by 2020,and 3)the policy mix scenario of the above two policies.Simulations are undertaken with the Chinese Academy of Sciences general equilibrium(CAS-GE)model,a type of computable GE model,to assess the macro-economic impact and the industrial impact of the three policy scenarios.Through the policy impact mechanism analysis and data-mapping process,the micro-economic impact analysis results,including costs and fuel savings,for the two policies from the bottom-up model are taken as the shock variables and inputs for the CAS-GE model.The results show that:1)the two policies will both have a slightly negative impact(-0.09% and -0.30%)on Chongqing's GDP in 2020;2)the employment rate will decrease by 0.12% and 0.47%,but the inflation rate will be restrained to a certain extent(-0.21% and -0.17%);and 3)the complementarity of the mixed policy can weaken the negative impact of the two policies when implemented separately.The mixed policy will reduce the GDP slightly by 0.37%,compared with the cumulative effect of the two policies implemented separately,resulting in cost-effective synergies at the macroeconomic impact level;and 4)the COVID-19 pandemic in 2020 has an uncertain impact on the results.The method and results can provide a reference for the formulation and adjustment of low-carbon transportation policies in other large cities.

Determination of urban runoff coefficient using time series inverse modeling

Runoff coefficient is an important parameter for the decision support of urban stormwater management. However, factors like comprehensive land-use type, variable spatial elevation, dynamic rainfall and groundwater elevation, make the direct estimation of runoff coefficient difficult. This paper presented a novel method to estimate the urban runoff coefficient using the inverse method, where observed time-series catchment outfall flow volume was employed as input for the water balance model and runoff coefficients of different catchments were treated as unknown parameters. A developed constrained minimization objective function was combined to solve the model and minimized error between observed and modeled outfall flow is satisfactory for the presenting of a set of runoff coefficients. Estimated runoff coefficients for the urban catchments in Shanghai downtown area demonstrated that practice of low impact design could play an important role in reducing the urban runoff.

A new academic impact metric for evaluating geographic simulation models

Geographic simulation models can be used to explore and better understand the geographical environment. Recent advances in geographic and socio-environmental research have led to a dramatic increase in the number of models used for this purpose. Some model repositories provide opportunities for users to explore and apply models,but few provide a general evaluation method for assessing the applicability and recognition of models. In this study,an academic impact evaluation method for models is proposed. Five indices are designed based on their pertinence. The analytical hierarchy process is used to calculate the index weights,and the academic impacts of models are quantified with the weighted sum method. The time range is controlled to evaluate the life-term and annual academic impacts of the models. Some models that met the evaluation criteria from different domains are then evaluated. The results show that the academic impact of a model can be quantified with the proposed method,and the major research areas that models impact are identified.

The Primary Product Export Model In Latin America And Its Impact

ＴｈｅＰｒｉｍａｒｙＰｒｏｄｕｃｔＥｘｐｏｒｔＭｏｄｅｌＩｎＬａｔｉｎＡｍｅｒｉｃａＡｎｄＩｔｓＩｍｐａｃｔ￥ＳｕＺｈｅｎｘｉｎｇ苏振兴ＴｈｅａｕｔｈｏｒｉｓｄｉｒｅｃｔｏｒａｎｄｒｅｓｅａｒｃｈｆｅｌｌｏｗｏｆＩｎｓｔｉｔｕｔｅｏｆＬａｔｉｎＡｍｅ...

Quantitative analysis of impact of green stormwater infrastructures on combined sewer overflow control and urban flooding control

Stimulated by the recent USEPA＇s green stormwater infrastructure （GSI） guidance and policies, GS1 systems have been widely implemented in the municipal area to control the combined sewer overflows （CSOs）, also known as low impact development （LID） approaches. To quantitatively evaluate the performance of GSI systems on CSO and urban flooding control, USEPA-Stormwater Management Model （SWMM） model was adopted in this study to simulate the behaviors of GSI systems in a well- developed urban drainage area, PSW45, under different circumstances. The impact of different percentages of stormwater runoff transported from impervious surfaces to the GSI systems on CSO and urban flooding control has also been investigated. Results show that with current buildup, GSI systems in PSW45 have the best performance for low intensity and short duration events on both volume and peak flow reductions, and have the worst pertbrmance tor high intensity and long durataon events. Since the low intensity and short duration events are dominant from a long-term perspective, utilizing GSI systems is considered as an effective measure of CSO control to meet the long-term controlstrategy for PSW45 watershed. However, GSI systems are not suitable for the flooding control purpose in PSW45 due to the high occurrence possibility of urban flooding during or after high intensity events where GSI systems have relatively poor performance no matter for a short or long duration event,

A novel simple traumatic brain injury mouse model

Background:Traumatic brain injury,one of the leading causes of death in adults under 40 years of age in the world,is frequently caused by mechanical shock,resulting in diffuse neuronal damage and long-term cognitive dysfunction.Many existing TBI animal models revival with expensive equipment or special room are needed or the processes of operations are complex and not easy to be widely used.Therefore,a simpler TBI model needs to be designed.Methods:Our TBI model is an innovation of the modeling method through air guns shutting rubber bullets.A core facet is the application of our designed rubber bullet impact device.It could focus the hitting power to the fixed site of the brain,thus triggering a mild closed head injury.Moreover,the degree of damage can be adjusted by the times of shots.Results:Our model induced blood-brain barrier leakage and diffused neuronal damage.Besides,it led to an increased level of Tau phosphorylation and resulted in cognitive dysfunction within several weeks post-injury.Conclusion:Our TBI model is not only simple and time-saving but also can simulate mild brain injuries in clinical.It is suitable for exploring pathobiological mechanisms as well as a screening of potential therapies for TBI.