Electrical impedance scanning in breast tumor imaging： correlation with the growth pattern of lesion

Background This study researched the electric impedance properties of breast tissue and demonstrated the different characteristic of electrical impedance scanning （EIS） images. Methods The impedance character of 40 malignant tumors, 34 benign tumors and some normal breast tissue from 69 patients undergoing breast surgery was examined by EIS in vivo measurement and mammography screening, with a series of frequencies set between 100 Hz-100 kHz in the ex vivo spectroscopy measurement. Results Of the 39 patients with 40 malignant tumors, 24 showed bright spots, 11 showed dark areas in EIS and 5 showed no specific image. Of the 30 patients with 34 benign tumors there were almost no specific abnormality shown in the EIS results. Primary ex vivo spectroscopy experiments showed that the resistivity of various breast tissue take the following pattern： adipose tissue〉cancerous tissue〉mammary gland and benign tumor tissue. Conclusions There are significant differences in the electrical impedance properties between cancerous tissue and healthy tissue. The impedivity of benign tumor is lower, and is at the same level with that of the mammary glandular tissue. The distinct growth pattern of breast lesions determined the different electrical impedance characteristics in the EIS results.

Influence of PTFE on Electrode Structure for Performance of PEMFC and 10-Cells Stack

Water plays a critical role on the performance, stability and lifetime of proton exchange membrane fuel cells（PEMFCs）. The addition of poly tetrafluoroethylene（PTFE） to the gas diffusion layer, especially, the cathode side, would optimize the transportation of water, electron and gas and thus improve the performance of the fuel cell. But until now, the studies about directly applying the PTFE to the catalyst layer are rarely reported. In this paper, the membrane electrode is fabricated by using directly coating catalyst to the membrane method（CCM） and applying PTFE directly to the cathode electrode catalyst layer. The performance of the single cell is determined by polarization curves and durability tests. Electrochemical impedance spectroscopy（EIS） and scanning electron microscopy（SEM） techniques are used to characterize the electrochemical properties of PEMFC. Also the performance of a 10-cells stack is detected. Combining the performance and the physical-chemistry characterization of PEMFC shows that addition of appropriate content of PTFE to the electrode enhances the performance of the fuel cell, which may be due to the improved water management. Addition of appropriate content of PTFE enhances the interaction between the membrane and the catalyst layer, and bigger pores and highly textured structure form in the MEA, which favors the oxygen mass transfer and protons transfer in the fuel cell. While superfluous addition of PTFE covers the surface of catalysts and hindered the contact of catalyst with Nation, which leads to the reduction of electrochemical active area and the decay of the fuel cell performance. The proposed research would optimize the water management of the fuel cell and thus improve the performance of the fuel cell.

Direct visualization of percolating metal-insulator transition in V_(2)O_(3) using scanning microwave impedance microscopy

Using the extensively studied V_(2)O_(3) as a prototype system, we investigate the role of percolation in metal-insulator transition(MIT). We apply scanning microwave impedance microscopy to directly determine the metallic phase fraction p and relate it to the macroscopic conductance G, which shows a sudden jump when p reaches the percolation threshold. Interestingly, the conductance G exhibits a hysteretic behavior against p, suggesting two different percolating processes upon cooling and warming. Based on our image analysis and model simulation, we ascribe such hysteretic behavior to different domain nucleation and growth processes between cooling and warming, which is likely caused by the decoupled structural and electronic transitions in V_(2)O_(3) during MIT. Our work provides a microscopic view of how the interplay of structural and electronic degrees of freedom affects MIT in strongly correlated systems.

Microbiologically Induced Corrosion of X80 Pipeline Steel in a Near-Neutral pH Soil Solution

MIC of X80 pipeline steel in a near-neutral pH soil solution in the presence and absence of sulfate-reducing bacteria（SRB） was monitored by electrochemical techniques and microbiological tests. The results show that soil solution is more close to the complex soil environment around pipeline. The activity of SRB leads to the shift of the phase response to low frequency, the decrease of electrolyte resistance and the alteration of dielectric constant of the film. Both the activity and metabolite of SRB influence the corrosion behavior of the steel. The steel surface undergoes localized attack in the SRB-inoculated soil solution, whereas only slight uniform corrosion occurs in the sterile soil solution.