Catchment-based Imperviousness Metrics Impacts on Floods in Niushou River Basin,Nanjing City,East China

Concerns regarding urbanization impacts on floods gradually moved from end-of-pipe solutions, based on open channel hydraulics improvement, to imperviousness ratio limiting and then to land use control and to integrated planning at local and large scale levels. The Niushou River basin is one of the fastest urbanizing areas in Nanjing City, East China, however, the high urban land percentage has leaded to series of flooding events. The paper aims to reveal the impact of imperviousness ratio, patterns and drainage system on flooding areas based on the unit of catchment and Storm Water Management Model(SWMM). The following conclusions were reached. 1) The ratio or spatial characteristics of the impervious surface affected the runoff volumes and associated floods areas. Despite the well-established drainage system, the high imperviousness ratio, particularly clustered pattern in locations such as hydrological sensitive zones aggravated the flooding tension across the basin. 2) The poor drainage hydraulic efficiency in local areas, and the lack of integral processes of infiltration, yield, storage and discharge in local catchment and larger basin are also significant factors. 3) The Niushou River basin development should improve the drainage transformations from a single local, short-term drainage process into integral, elastic processes of infiltration, yield, storage, and discharge.

Mechanisms to explain soil liquefaction triggering,development,and persistence during an earthquake

Mechanisms have been proposed to explain the triggering,development,and persistence of soil liquefaction.The mechanism explaining the horizontal failure plane(triggering)and its depth below the phreatic surface is governed by the flux properties and effective stress at that plane.At the failure plane,the pore water pressure was higher than the effective stress,and the volume change was the highest.The pore water pressure is a function of the soil profile features(particularly the phreatic zone width)and bedrock motion(horizontal acceleration).The volume change at the failure plane is a function of the intrinsic permeability of the soil and bedrock displacement.The failure plane was predicted to occur during the oscillation with the highest amplitude,disregarding further bedrock motion,which was consistent with low seismic energy densities.Two mechanisms were proposed to explain the persistence of soil liquefaction.The first is the existence of low-permeability layers in the depth range in which the failure planes are predicted to occur.The other allows for the persistence and development of soil liquefaction;it is consistent with homogeneous soils and requires water inflow from bedrock water springs.The latter explains many of the features of soil liquefaction observed during earthquakes,namely,surficial effects,“instant”liquefaction,and the occurrence of short-and long-term changes in the level of the phreatic surfaces.This model(hypothesis),the relationship between the flux characteristics and loss of soil shear strength,provides self-consistent constraints on the depth below the phreatic surfaces where the failure planes are observed(expected to occur).It requires further experimental and observational evidence.Similar reasoning can be used to explain other saturated soil phenomena.

Geospatial Analysis of Urban Heat Island Effects and Tree Equity

In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.

Effects of Increasing Rainfall Depths and Impervious Areas on the Hydrologic Responses

Hydrologic modeling is a popular tool for estimating the hydrological response of a watershed. However, modeling processes are becoming more complex due to land-use changes such as urbanization, industrialization, and the expansion of agricultural activities. The primary goal of the research was to use the HEC-HMS model to evaluate the impact of impervious soil layers and the increase in rainfall-runoff processes on hydrologic processes. For these purposes, the Watershed Modelling System (WMS) and Hydrologic Engineering Center’s-Hydrologic Modeling System (HEC-HMS) models were used in this study to simulate the rainfall-runoff process. To compute runoff rate, runoff volume, base flow, and flow routing methods SCS curve number, SCS unit hydrograph, recession, and loss routing methods were selected for the research, respectively. To reduce the processing time and computational complexity, a small section of the Pipestem Creek Watershed was selected to understand the methods and concepts associated with the hydrologic simulation model building. A DEM along with other required data such as land use land cover data, soil type data, and meteorological data was utilized to delineate the watershed in WMS. The output of WMS was utilized to run the HEC-HMS model for five different scenario analyses. All the relevant data were plugged in to the model to get the desired map. Subsequently, outlets at appropriate locations were selected for the sub-basin delineation for further analysis. Finally, the model was parametrized to get successful simulation results. Overall, peak discharges and runoff volumes were increased with increasing storm depths and impervious areas. Peak discharges were increased to 36% and 51% when rainfall depths were increased by 10% and 20% from the initial rainfall depth, respectively. Runoff volumes were also increased to 35% and 49% for the same scenarios, respectively. Peak discharges were increased to 12% and 78% with a 10% and 20%, respectively, increase in impervious areas. The runoff volumes were increased by 12% and 76% when impervious areas were increased by 10% and 20%, respectively. The simulation models responded well, and the peak discharges and runoff volumes increased with increasing storm depths and impervious areas.

Extracting Impervious Surface and Its Change Information Using Satellite Remote Sensing Data

Impervious surface is one of the important parameters of valley water circular simulation,scientific estimation for which has significant and practical value for the urban water quantity and process simulation,diffuse pollution estimating and the forecast of climate changes.The objective of this research is to get the information of impervious surface and its dynamic change.Through the computer-assisted field method,the technologies of decision tree and data mining were applied to withdraw the impervious surface information in research region by the Landsat TM data in 1988,1994 and 2002.The results suggested that the accuracy of impervious surface information extraction in the study area arrived above 94.4% in 2002 image.On this basis,the mixed method was used to extract the location and the types of the impervious surface change.The overall accuracy of monitoring reached 89%,which meets the demand of the hydrological models.

Pollutant loads of surface runoff in Wuhan City Zoo, an urban tourist area

The pollutant loads of surface runoff in an urban tourist area have been investigated for two years in the Wuhan City Zoo, China. Eight sampling sites, including two woodlands, three animal yards, two roofs and one road, were selected for sampling and study. The results indicate that pollutants ranked in a predictable order of decreasing load （e.g. animal yard〉roof〉woodland〉road）, with animal yards acting as the key pollution source in the zoo. Pollutants were transported mainly by particulate form in runoff. Particulate nitrogen and particulate phosphorous accounted on average for 61%, 78% of total pollutant, respectively, over 13 monitored rainfall events. These results indicate the treatment practices should be implemented to improve particulate nutrient removal. Analysis of the M（V） curve indicate that no first flush effect existed in the surface runoff from pervious areas （e.g. woodland, animal ground yard）, whereas a first flush effect was evident in runoff from impervious surfaces （e.g. animal cement yard, roof, road）.

Improvement of Urban Impervious Surface Estimation in Shanghai Using Landsat7 ETM+ Data

This paper explores the potential to improve the impervious surface estimation accuracy using a multi-stage approach on the basis of vegetation-impervious surface-soil (V-I-S) model. In the first stage of Spectral Mixture Analysis (SMA) process, pixel purity index, a quantitative index for defining endmember quality, and a 3-dimensional endmember selection method were applied to refining endmembers. In the second stage, instead of obtaining impervious surface fraction by adding high and low albedo fractions directly, a linear regression model was built between impervious surface and high/low albedo using a random sampling method. The urban impervious surface distribution in the urban central area of Shanghai was predicted by the linear regression model. Estimation accuracy of spectral mixture analysis and impervious surface fraction were assessed using root mean square (RMS) and color aerial photography respectively. In comparison with three different research methods, this improved estimation method has a higher overall accuracy than traditional Linear Spectral Mixture Analysis (LSMA) method and the normalized SMA model both in root mean square error (RMSE) and standard error (SE). However, the model has a tendency to overestimate the impervious surface distribution.

Examining the Relationship Between Spatial Configurations of Urban Impervious Surfaces and Land Surface Temperature

The urban heat island(UHI) effect has significant effects on the quality of life and public health. Numerous studies have addressed the relationship between UHI and the increase in urban impervious surface area(ISA), but few of them have considered the impact of the spatial configuration of ISA on UHI. Land surface temperature(LST) may be affected not only by urban land cover, but also by neighboring land cover. The aim of this research was to investigate the effects of the abundance and spatial association of ISAs on LST. Taking Harbin City, China as an example, the impact of ISA spatial association on LST measurements was examined. The abundance of ISAs and the LST measurements were derived from Landsat Thematic Mapper(TM) imagery of 2000 and 2010, and the spatial association patterns of ISAs were calculated using the local Moran’s I index. The impacts of ISA abundance and spatial association on LST were examined using correlation analysis. The results suggested that LST has significant positive associations with both ISA abundance and the Moran’s I index of ISAs, indicating that both the abundance and spatial clustering of ISAs contribute to elevated values of LST. It was also found that LST is positively associated with clustering of high-ISA-percentage areas(i.e.,>50%) and negatively associated with clustering of low-ISA-percentage areas(i.e.,<25%). The results suggest that, in addition to the abundance of ISAs,their spatial association has a significant effect on UHIs.

Seepage and stress analysis of anti-seepage structures constructed with different concrete materials in an RCC gravity dam

This study used the finite element method （FEM） to analyze the stress field and seepage field of a roller-compacted concrete （RCC） dam, with an upstream impervious layer constructed with different types of concrete materials, including three-graded RCC, two-graded RCC, conven- tional vibrated concrete （CVC）, and grout-enriched vibrated RCC （GEVR）, corresponding to the design schemes S 1 through $4. It also evaluated the anti-seepage performance of the imperious layer in the four design schemes under the normal water level and flood-check level. Stress field analysis of a retaining section and discharge section shows that the maximum tensile stress occurs near the dam heel, the maximum compressive stress occurs near the dam toe, and the stress distributions in the four schemes can satisfy the stress control criteria. Seepage field analysis shows that the uplift pressure heads in schemes S3 and S4 descend rapidly in the anti-seepage region, and that the calculated results of daily seepage flow under the steady seepage condition in these two schemes are about 30%-50% lower than those in the other two schemes, demonstrating that CVC and GEVR show better anti-seepage performance. The results provide essential parameters such as the uplift pressure head and seelga^e flow for physical model tests and anti-seepage structure selection in RCC dams.

Study on Remote Sensing Information Extraction Technology for the Impervious Surface of Erhai Basin

[Objective] To study the remote sensing information extraction technology for the impervious surface of Erhai basin with the aim to develop dynamic simulation platform for the formation of water pollution. [Method] Linear spectral separation technology was used to achieve Vd-S model solution, extracting remote sensing in- formation of the impervious surface of Erhai basin from the TM data of Landsat5 in 2009. The linear combination of 4 kinds of endmember spectra, namely vegetation, high anti-illumination, low anti-illumination and bare soil, were used to simulate the TM spectral characteristics, and its distribution and spatial characteristics were ana- lyzed. [Result] Middle-resolution image is suitable for the basin-scaled impervious surface extraction with reliable results and satisfactory accuracy. [Conclusion] This study provided basis for deciding the relationship between the regulation strategy on the non-point source pollution of Erhai Lake, coordinated economic development and environmental protection.

Effects of urbanization on groundwater level in aquifers of Binh Duong Province,Vietnam

The purpose of this paper was to assess the impact of urbanization on the groundwater level(GWL)in aquifers of Binh Duong(BD)Province.The research method is to analyze the trend of GWL,the recharge capacity of surface over time and the relationship between them.The data of the GWL used in the study are the average values in the dry and rainy seasons of 35 observation wells from 2011 to 2018,which are in Pleistocene and Pliocene aquifers.The ability to recharge groundwater from the surface in this study was represented by the curve number(CN),a parameter used in hydrology for calculating direct runoff or infiltration from rainfall.The land use data to identify the CN was analyzed from the Landsat images.The results show that besides over-exploitation,the change of surface characteristic due to the urbanization development process is also the cause of the GWL decline.The analysis of seasonal GWL data shows that the increase in impervious surface area is the cause of GWL decline in the Pleistocene aquifer,which is more evident in the rainy season than in the dry season.The statistical results also show that in the rainy season and in shallow aquifers,a higher CN change can be found with the wells that had a remarkable GWL decline compared to the remaining wells.

Consolidation of partially saturated ground improved by impervious column inclusion:Governing equations and semi-analytical solutions

This study focuses on the consolidation behavior and mathematical interpretation of partially-saturated ground improved by impervious column inclusion.The constitutive relations for soil skeleton,pore air and pore water for partially saturated soils are proposed in the context of partially-saturated ground improved by impervious column inclusion.Settlement equation and dissipation equations of excess pore air/water pressures for a partially saturated improved ground are then derived.The semi-analytical solutions for ground settlement and pore pressure dissipation are then obtained through the Laplace transform and validated by the existing solutions for two special cases in the literature and the numerical results obtained from the finite difference method.A series of parametric studies is finally conducted to investigate the influence of some key factors on consolidation of partially saturated ground improved by impervious column inclusion.Based on the parametric study,it can be found that a higher value of the area replacement ratio or modulus of the pile results in a longer dissipation time of excess pore air pressure(PAP),a shorter dissipation time of excess pore water pressure(PWP),and a lower normalized settlement.

Integrating CART Algorithm and Multi-source Remote Sensing Data to Estimate Sub-pixel Impervious Surface Coverage:A Case Study from Beijing Municipality,China

The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS values over large areas can be extracted,and these data are significant for studies of urban climate,environment and hydrology.To develop a stabilized,multi-temporal SPIS estimation method suitable for typical temperate semi-arid climate zones with distinct seasons,an optimal model for estimating SPIS values within Beijing Municipality was built that is based on the classification and regression tree(CART) algorithm.First,models with different input variables for SPIS estimation were built by integrating multi-source remote sensing data with other auxiliary data.The optimal model was selected through the analysis and comparison of the assessed accuracy of these models.Subsequently,multi-temporal SPIS mapping was carried out based on the optimal model.The results are as follows:1) multi-seasonal images and nighttime light(NTL) data are the optimal input variables for SPIS estimation within Beijing Municipality,where the intra-annual variability in vegetation is distinct.The different spectral characteristics in the cultivated land caused by the different farming characteristics and vegetation phenology can be detected by the multi-seasonal images effectively.NLT data can effectively reduce the misestimation caused by the spectral similarity between bare land and impervious surfaces.After testing,the SPIS modeling correlation coefficient(r) is approximately 0.86,the average error(AE) is approximately 12.8%,and the relative error(RE) is approximately 0.39.2) The SPIS results have been divided into areas with high-density impervious cover(70%–100%),medium-density impervious cover(40%–70%),low-density impervious cover(10%–40%) and natural cover(0%–10%).The SPIS model performed better in estimating values for high-density urban areas than other categories.3) Multi-temporal SPIS mapping(1991–2016) was conducted based on the optimized SPIS results for 2005.After testing,AE ranges from 12.7% to 15.2%,RE ranges from 0.39 to 0.46,and r ranges from 0.81 to 0.86.It is demonstrated that the proposed approach for estimating sub-pixel level impervious surface by integrating the CART algorithm and multi-source remote sensing data is feasible and suitable for multi-temporal SPIS mapping of areas with distinct intra-annual variability in vegetation.

Using Impervious Surfaces to Detect Urban Expansion in Beijing of China in 2000s

The change of impervious surface area(ISA) can effectively reveal the gradual process of urbanization and act as a key index for monitoring urban expansion. Experiencing rapid growth of the built environment in the 2000 s, urban expansion of Beijing has not been fully characterized through ISA. In this study, Landsat TM images of Beijing in 2001 and 2009 were obtained, and the eight-year urban expansion process in Beijing was analyzed using the ISA extracted by means of the vegetation-imperious surface-soil(V-I-S) model. From the spatial variation in ISA, the ring structure of urban expansion in Beijing was significant during the study period, with decreasing urban density from the city center to the periphery. In the ring road analysis, the most dramatic changes of ISA were found between the fifth ring and the sixth ring. This area has experienced the most new residential development, and is currently the main source of urban expansion. The typical profile lines revealed the directional characteristics of urban expansion. The east-west profile was the most urbanized axes in Beijing, while ISA change in the east-north profile was more significant than in the other five profiles. Moreover, the transition matrix of ISA levels revealed an increase in urban density in the low density built areas; the Moran′s I index showed a clear expansion of the central urban area, which spread contiguously; and the standard deviational ellipse indicated the northeast was the dominant direction of urban expansion. These findings can provide important spatial control guidelines in the next round of national economic and social development planning, overall urban and rural planning, and land use planning.

Directional Analysis of Urban Expansion Based on Sub-pixel and Regional Scale: A Case Study of Main Districts in Guangzhou, China

Multi-scale data have had a wide-ranging level of performance in the area of urban change monitoring. Herein we investigate the correlation between the impervious surface fraction(ISF) and the Defense Meteorological Satellite Program/Operational Linescan System(DMSP/OLS) nighttime stable light(NTL) data with respect to the urban expansion in the main districts of Guangzhou. Landsat 5 Thematic Mapper and Landsat 8 Operational Land Image(OLI) data from 1988 to 2015 were used to extract the ISF using the linear spectral mixture analysis model and normal difference build-up index at the sub-pixel scale. DMSP/OLS NTL data from 1992 to 2013 were calibrated to illustrate the urban nighttime light conditions at the regional scale. Urban expansion directions were identified by statistics and kernel density analysis for the ISF study area at the sub-pixel scale. In addition, the correlation between the ISF and DMSP/OLS NTL data were illustrated by linear regression analysis. Furthermore, Profile Graph in ArcGIS was employed to illustrate the urban expansion from the differences in correlation in different directions. The conclusions are as follows: 1) The impervious surface(IS)in the study area has expanded to the northeast and the east, starting with the old urban zones, and the high-density IS area has increased by321.14 km^2. 2) The linear regression analysis reveals a positive correlation between the ISF and the DMSP/OLS NTL data. The multi-scale data changes are consistent with the actual urban planning of Guangzhou. 3) The DMSP/OLS NTL data overestimate the urban extent because of its saturation and blooming effects, causing its correlation with ISF to decrease. The pattern of urban expansion influences the saturation and blooming effects of the DMSP/OLS NTL data.

Statistical Change Detection in Water Cycle over Two Decades and Assessment of Impact of Urbanization on Surface and Sub-Surface Water Flows

Urbanization is termed as physical transformation of landscapes that alter the natural regime of the environment of its surrounding resulting in further changes in macro as well as micro climate of the region [1]. Urban areas are continually facing problems of water scarcity and urban flash floods. Recent news from IPCC report 2010, CIESIN’s Global Rural Urban Mapping Project [2] and World Water Vol. 7 2007, it is clear that urban land area has doubled and affected the hydrological cycle. The components of hydrological cycle affected are Infiltration, Runoff and Evaporation and the causing components are derived by studies as land use, land cover, water withdrawal and urban developments. Thus water availability, water recharge and water cycle are all destabilized in course or urban development. The paper is an attempt to correlate and identify the periodical changes in urban water cycle, during urbanization of Bhopal City, India, during last twenty years and above. The observations are based on GIS mapping of the study area from 1991 to 2009 using rational method of runoff and recharge calculations and statistical analysis of related built-up areas. Also change in natural course of drainages with the help of GIS imageries which have been detected during twenty years that help to observe the adaptation of natural system to urban course. Also the observations show an interesting relation which can be used for further research and sustainable development [3].

Urban Climate Analysis with Remote Sensing and Climate Observations: A Case of Morogoro Municipality in Tanzania

Rapid urbanization is threatening sustainable development of urban areas in Tanzania. Among the risks of rapid urbanization are Urban Heat Island (UHI) effect and climate change. While this has been noted, it is not known to what extent these risks are being realized in fast growing urban areas like Morogoro and other areas of similar geographic and climatic conditions. Therefore a study was conducted to assess the influence of urbanization on UHI and climate in Morogoro Municipality using remote sensing and climate data. Landsat imageries acquired in 1990, 2000 and 2015 were used to assess the change of impervious surface for the year 1990 to 2015 using a Classification and Regression Tree (CART). Radiant surface temperature and normalized difference vegetation index (NDVI) were derived from thermal band and reflectance bands respectively. Mann-Kendall test was used to analyze climate data for trends. Results revealed an increase of impervious surface (built up areas) from 9 km2 in 1990 to 48 km2 in 2000 and 82 km2 in 2015;which is associated with UHI. UHI was not apparent in 1990, but was apparent in 2000 and 2015 with the temperature rise of 1.08°C and 1.22°C respectively. A linear relationship between radiant surface temperature (TB ) and percent Impervious Surface (ISA);and between TB and NDVI it revealed that NDVI is better indicator of variations in TB dynamics than percent ISA. Mann-Kendall test indicated a significant increasing trend in mean annual maximum temperature. The results imply that increasing ISA coupled with vegetation degradation has contributed to temperature rise and change. Consequently, Morogoro Municipality residents are likely to suffer heat stress due to rapid urbanization. It is recommended that education on the use of reflective surfaces should be given to the residents;and an effective master plan that protects vegetation should be in place.

Analysis of Impervious Surface Area, and the Impacts on Soil-Based Agriculture and the Hydrologic Cycle: A Case Study in the Agricultural Land Reserve in Metro Vancouver, British Columbia, Canada

The province of British Columbia, Canada, has established an Agricultural Land Reserve (ALR) to protect the most suitable soil landscapes for agriculture. Increases in population and urbanization have resulted in development challenges on ALR lands. The Metro Vancouver area is the most productive agricultural area in British Columbia as well as the most rapidly growing urban region. The increase in impervious areas has decreased the amount of arable land for soil-based agriculture and altered the hydrological cycle. Analysis using a combination of aerial imagery and GIS found that impervious areas comprise about 10 percent of the ALR within Metro Vancouver. Farm residences and greenhouses have the largest effect on reducing the soil surface for water infiltration. This decrease in area has negatively influenced the ecosystem heath of the region, as well as, decreasing the amount of agricultural land for soil based agriculture and both surface and groundwater dynamics.

On Axially Symmetric Vibrations of Fluid Filled Poroelastic Spherical Shells

Employing Biot’s theory of wave propagation in liquid saturated porous media, waves propagating in a hollow poroelastic closed spherical shell filled with fluid are studied. The frequency equation of axially symmetric vibrations for a pervious and an impervious surface is obtained. Free vibrations of a closed spherical shell are studied as a particular case when the fluid is vanished. Frequency as a function of ratio of thickness to inner radius is computed in absence of dissipation for two types of poroelastic materials each for a pervious and an impervious surface. Results of previous works are obtained as a particular case of the present study.

A Study on Impervious and Heat-Insulating Performance of Geomembrane Composites Within Breakwater

This paper investigates the performance of geomembrane composites used as impervious and heat-insulating lining within a breakwater for a power station. The seepage field, distribution of stress-strain contour and seepage discharge of hot water which has been treated as the inner thermal source in the calculation of heat-insulation, have been given by three-dimensional calculation method coupling seepage with stress. The results indicate that the impervious and heat-insulation effect of geomembrane composites is significant.