Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where T...Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where TBMs are increasingly large in diameter and shallow in depth.In response to this problem,four experimental campaigns were carried out in different geotechnical contexts in France.The vibration measurements were acquired on the surface and inside the TBMs.These measurements are also complemented by few data in the literature.An original methodology of signal processing is pro-posed to characterize the amplitude of the particle velocities,as well as the frequency content of the signals to highlight the most energetic bands.The levels of vibrations are also compared with the thresholds existing in various European regulations concerning the impact on neighbouring structures and the disturbance to local residents.展开更多
On the basis of welding transformer circuit model, a new measuring method was proposed. This method measures the peak angle of the welding current, and then calculates the dynamic power factor in each half-wave. An ar...On the basis of welding transformer circuit model, a new measuring method was proposed. This method measures the peak angle of the welding current, and then calculates the dynamic power factor in each half-wave. An artificial neural network is trained and used to generate simulation data for the analytical solution, i.e. a high-order binary polynomial, which can be easily adopted to calculate the power factor online. The tailored sensing and computing system ensures that the method possesses a real-time computational capacity and satisfying accuracy. A DSP-based resistance spot welding monitoring system was developed to perform ANN computation. The experimental results suggest that this measuring method is feasible.展开更多
Here,we report the results of high-resolution nitrate measurements using an optical nitrate profiler(in situ ultraviolet spectrophotometer,ISUS)along transect across a high-turbidity shelf(East China Sea)and a low-tur...Here,we report the results of high-resolution nitrate measurements using an optical nitrate profiler(in situ ultraviolet spectrophotometer,ISUS)along transect across a high-turbidity shelf(East China Sea)and a low-turbidity shelf(Chukchi Sea).The ISUS-measured nitrate concentrations closely reproduced the results measured by conventional bottle methods in low-turbidity waters.However,for high-turbidity waters of the East China Sea(salinity<30),a correction factor of 1.19 was required to match the standard bottle measurements.The high-resolution ISUS data revealed subtle spatial variability(e.g.,a subsurface nitrate minimum)that may have been missed if based solely on bottle results.Four main structures of the nitracline on the East China Sea are apparent from the ISUS nitrate profile.High-resolution nitrate data are important for studying nitrate budgets and nutrient dynamics on continental shelves.展开更多
Application of digital image correlation(DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and pointwise leas...Application of digital image correlation(DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and pointwise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.展开更多
The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measureme...The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measurements of the Electromagnetic Flow Meters （EFM） and Electrical Resistance Tomography （ERT） to study the flow rates of individual phases in a vertical flow was proposed. The study was based on laboratory experiments that were carded out with a 50 mm vertical flow rig for a number of sand concentrations and different mixture velocities. A range of sand slurries with median particle size from 212 μm to 355 μm was tested. The solid concentration by volume covered was 5% and 15%, and the corresponding density of 5% was 1078 kg/m^3 and of 15% was 1238 kg/m^3. The flow velocity was between 1.5 m/s and 3.0 m/s. A total of 6 experimental tests were conducted. The equivalent liquid model was adopted to validate in-situ volumetric solids fraction and calculate the slip velocity. The results show that the ERT technique can be used in conjunction with an electromagnetic flow meter as a way of measurement of slurry flow rate in a vertical pipe flow. However it should be emphasized that the EFM results must be treated with reservation when the flow pattern at the EFM mounting position is a non-homogenous flow. The flow rate obtained by the EFM should be corrected considering the slip velocity and the flow pattern.展开更多
文摘Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where TBMs are increasingly large in diameter and shallow in depth.In response to this problem,four experimental campaigns were carried out in different geotechnical contexts in France.The vibration measurements were acquired on the surface and inside the TBMs.These measurements are also complemented by few data in the literature.An original methodology of signal processing is pro-posed to characterize the amplitude of the particle velocities,as well as the frequency content of the signals to highlight the most energetic bands.The levels of vibrations are also compared with the thresholds existing in various European regulations concerning the impact on neighbouring structures and the disturbance to local residents.
基金The National Natural Science Foundation of China (No 50575145)
文摘On the basis of welding transformer circuit model, a new measuring method was proposed. This method measures the peak angle of the welding current, and then calculates the dynamic power factor in each half-wave. An artificial neural network is trained and used to generate simulation data for the analytical solution, i.e. a high-order binary polynomial, which can be easily adopted to calculate the power factor online. The tailored sensing and computing system ensures that the method possesses a real-time computational capacity and satisfying accuracy. A DSP-based resistance spot welding monitoring system was developed to perform ANN computation. The experimental results suggest that this measuring method is feasible.
基金The National Key Research and Development Program of China under contract No.2019YFE0120900the Natural Science Foundation of Zhejiang Province under contract No.Y19D060024+1 种基金the National Natural Science Foundation of China under contract Nos U1709202 and 41806228the Project of Long-term Observation and Research Plan in the Changjiang Estuary and Adjacent East China Sea(LORCE).
文摘Here,we report the results of high-resolution nitrate measurements using an optical nitrate profiler(in situ ultraviolet spectrophotometer,ISUS)along transect across a high-turbidity shelf(East China Sea)and a low-turbidity shelf(Chukchi Sea).The ISUS-measured nitrate concentrations closely reproduced the results measured by conventional bottle methods in low-turbidity waters.However,for high-turbidity waters of the East China Sea(salinity<30),a correction factor of 1.19 was required to match the standard bottle measurements.The high-resolution ISUS data revealed subtle spatial variability(e.g.,a subsurface nitrate minimum)that may have been missed if based solely on bottle results.Four main structures of the nitracline on the East China Sea are apparent from the ISUS nitrate profile.High-resolution nitrate data are important for studying nitrate budgets and nutrient dynamics on continental shelves.
基金the National Natural Science Foundation of China(Nos.51575347,51405297 and 51204107)
文摘Application of digital image correlation(DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and pointwise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.
基金supported by the China-UK joint project of a study of multi-phase flow meter on EIT and CTA Techniques: Royal Society (Grant No. 15933)
文摘The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measurements of the Electromagnetic Flow Meters （EFM） and Electrical Resistance Tomography （ERT） to study the flow rates of individual phases in a vertical flow was proposed. The study was based on laboratory experiments that were carded out with a 50 mm vertical flow rig for a number of sand concentrations and different mixture velocities. A range of sand slurries with median particle size from 212 μm to 355 μm was tested. The solid concentration by volume covered was 5% and 15%, and the corresponding density of 5% was 1078 kg/m^3 and of 15% was 1238 kg/m^3. The flow velocity was between 1.5 m/s and 3.0 m/s. A total of 6 experimental tests were conducted. The equivalent liquid model was adopted to validate in-situ volumetric solids fraction and calculate the slip velocity. The results show that the ERT technique can be used in conjunction with an electromagnetic flow meter as a way of measurement of slurry flow rate in a vertical pipe flow. However it should be emphasized that the EFM results must be treated with reservation when the flow pattern at the EFM mounting position is a non-homogenous flow. The flow rate obtained by the EFM should be corrected considering the slip velocity and the flow pattern.
