A Study on the Work Process-Based Practical Training Model for Basic Nursing Skills in Vocational Colleges

Objective:To explore and analyze the work process-based practical training teaching model for basic nursing skills in vocational colleges and its implementation effects.Methods:A total of 82 nursing students from our school were selected for the study,which was conducted from April 2023 to April 2024.Using a random number table method,the students were divided into an observation group and a control group,each with 41 students.The control group received conventional practical training teaching,while the observation group followed the work process-based practical training model for basic nursing skills.The assessment scores and teaching satisfaction of the two groups were compared.Results:The comparison of assessment scores showed that the observation group performed significantly better than the control group(P<0.05).The comparison of teaching satisfaction also indicated that the observation group had significantly higher satisfaction than the control group(P<0.05).Conclusion:The work process-based practical training teaching model for basic nursing skills in vocational colleges can improve students’assessment scores and enhance teaching satisfaction,demonstrating its value for wider application.

Formulation of Work-Study Combined and Result-Oriented Integrated Curriculum Standards

According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.

Flexible Fixture Design for the Top and End Surface Processing of NP2_NP4 Cylinder Heads

This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.

Synthesis of indirect work exchange networks considering both isothermal and adiabatic process together with exergy analysis

In this paper, an efficient methodology for synthesizing the indirect work exchange networks(WEN) considering isothermal process and adiabatic process respectively based on transshipment model is first proposed. In contrast with superstructure method, the transshipment model is easier to obtain the minimum utility consumption taken as the objective function and more convenient for us to attain the optimal network configuration for further minimizing the number of units. Different from division of temperature intervals in heat exchange networks,different pressure intervals are gained according to the maximum compression/expansion ratio in consideration of operating principles of indirect work exchangers and the characteristics of no pressure constraints for stream matches. The presented approach for WEN synthesis is a linear programming model applied to the isothermal process, but for indirect work exchange networks with adiabatic process, a nonlinear programming model needs establishing. Additionally, temperatures should be regarded as decision variables limited to the range between inlet and outlet temperatures in each sub-network. The constructed transshipment model can be solved first to get the minimum utility consumption and further to determine the minimum number of units by merging the adjacent pressure intervals on the basis of the proposed merging methods, which is proved to be effective through exergy analysis at the level of units structures. Finally, two cases are calculated to confirm it is dramatically feasible and effective that the optimal WEN configuration can be gained by the proposed method.

CPS Modeling of CNC Machine Tool Work Processes Using an Instruction-Domain Based Approach

Building cyber-physical system(CPS) models of machine tools is a key technology for intelligent manufacturing. The massive electronic data from a computer numerical control(CNC) system during the work processes of a CNC machine tool is the main source of the big data on which a CPS model is established. In this work-process model, a method based on instruction domain is applied to analyze the electronic big data, and a quantitative description of the numerical control(NC) processes is built according to the G code of the processes. Utilizing the instruction domain, a work-process CPS model is established on the basis of the accurate, real-time mapping of the manufacturing tasks, resources, and status of the CNC machine tool. Using such models, case studies are conducted on intelligent-machining applications, such as the optimization of NC processing parameters and the health assurance of CNC machine tools.

Modeling of microstructure evolution of AZ80 magnesium alloy during hot working process using a unified internal state variable method

In this paper, a unified internal state variable(ISV) model for predicting microstructure evolution during hot working process of AZ80 magnesium alloy was developed. A novel aspect of the proposed model is that the interactive effects of material hardening, recovery and dynamic recrystallization(DRX) on the characteristic deformation behavior were considered by incorporating the evolution laws of viscoplastic flow, dislocation activities, DRX nucleation and boundary migration in a coupled manner. The model parameters were calibrated based on the experimental data analysis and genetic algorithm(GA) based objective optimization. The predicted flow stress, DRX fraction and average grain size match well with experimental results. The proposed model was embedded in the finite element(FE) software DEFORM-3 D via user defined subroutine to simulate the hot compression and equal channel angular extrusion(ECAE) processes. The heterogeneous microstructure distributions at different deformation zones and the dislocation density evolution with competitive deformation mechanisms were captured.This study can provide a theoretical solution for the hot working problems of magnesium alloy.

A Two-step Design Method for Shaft Work Targeting on Low-temperature Process

In low-temperature processes, there are interactions between heat exchanger network(HEN) and refrigeration system. The modification on HEN of the chilling train for increasing energy recovery does not always coordinate with the minimum shaft work consumption of the corresponding refrigeration system. In this paper, a systematic approach for optimizing low-temperature system is presented through mathematical method and exergy analysis. The possibility of "pockets", which appears as right nose section in the grand composite curve(EGCC) of the process, is first optimized. The EGCC with the pockets cutting down is designed as a separate part. A case study is used to illustrate the application of the approach for a HEN of a chilling train with propylene and ethylene refrigerant system in an ethylene production process.

Repair Effect of Hot Work Tool Steel by Laser-Melting Process

Both wear and crack due to heat checking in hot work tool steel are major failure modes.It is desirable to find amethod to lengthen the tool life while reducing manufacturing cost.This paper suggests a method to improve toollife for hot work tool steel(SKD6)with crack by laser-melting process.The method has been evaluated using theimpact and fatigue test results.It is demonstrated that a repair of the crack by a laser-melting process is effectivefor life extension of the damaged tool.

Processing map and hot working mechanisms of Cu-Ag alloy in hot compression process

For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.

Identifying Game Processes Based on Private Working Sets

Fueled by the booming online games,there is an increasing demand for monitoring online games in various settings.One of the application scenarios is the monitor of computer games in school computer labs,for which an intelligent game recognition method is required.In this paper,a method to identify game processes in accordance with private working sets(i.e.,the amount of memory occupied by a process but cannot be shared among other processes)is introduced.Results of the W test showed that the memory sizes occupied by the legitimate processes(e.g.,the processes of common native windows applications)and game processes followed normal distribution.Using the T-test,a significant difference was identified between the legitimate processes and C/S-based computer games,in terms of the means and variances of their private working sets.Subsequently,we derived the density functions of the private working sets of the considered game processes and those of the legitimate processes.Given the private working set of a process and the derived probability density functions,the probability that the process is a legitimate process and the probability that the process is a game process can be determined.After comparing the two probabilities,we can easily determine whether the process is a game process or not.As revealed from the test results,the recognition accuracy of this method for C/S-based computer games was approximately 90%.

The heat and work of quantum thermodynamic processes with quantum coherence

Energy is often partitioned into heat and work by two independent paths corresponding to the change in the eigenenergies or the probability distributions of a quantum system. The discrepancies of the heat and work for various quantum thermodynamic processes have not been well characterized in literature. Here we show how the work in quantum machines is differentially related to the isochoric, isothermal, and adiabatic processes. We prove that the energy exchanges during the quantum isochoric and isothermal processes are simply depending on the change in the eigenenergies or the probability distributions. However, for a time-dependent system in a non-adiabatic quantum evolution, the transitions between the different quantum states representing the quantum coherence can affect the essential thermodynamic properties, and thus the general definitions of the heat and work should be clarified with respect to the microscopic generic time-dependent system. By integrating the coherence effects in the exactly-solvable dynamics of quantum-spin precession, the internal energy is rigorously transferred as the work in the thermodynamic adiabatic process. The present study demonstrates that the quantum adiabatic process is sufficient but not necessary for the thermodynamic adiabatic process.

Combining a Safety Management Process with a Safety Framework

A safety document management system, known as a Permit for Work (PFW) system is used commonly in the Power Industry to provide appropriate safety conditions for those working on the generating system. This paper investigates how a safety management process (+PFW) can be combined with a safety framework to enhance system effectiveness to ensure the requirements of users and suppliers can be met. While the paper makes some reference to the power industry, the concept is applicable to the management of systems in other domains.

The Evaluation System Research based on the Working Process Systematization of the Practice Teaching Quality

The design philosophy based on the working process systematization, the feature of practice teaching is analyzed the principles of practice teaching quality evaluation system are summed up. The evaluation system based on working process systematization of the practice teaching quality is established, the management of quality evaluation system and the project of the monitoring are put forward.

Hot Working Technology and HP Pulverizer -Two Major Sophisticated Processing Technology and Product in SHMP

Hot Working Technology SHMP is a production center of heavy duty castings and forgings in east region of China. Since the establishment of the plant in 1950s, through several generations’ exploration, development and innovation, SHMP now has been able to produce main castings and forgings for 300 MW

MY WORK ON THE EPICENTRAL PROCESS OF EARTHQUAKES

In 1962, I graduated from the faculty of geophysics of Beijing University and was admitted to a postgraduate program at the CAS Institute of Geophysics after an entrance examination in the same year. During the past 30 years, I have been invariabl.y engaged in theoretic and applied research of the seismic wave and its epicenter.Since the early 1970s, my work has shifted to the epicentral process, applying research results to abstracting epicentral information from seismic wave data, "zero fre-

MY WORK FOR UPDATING PETROCHEMICAL CATALYSIS AND PROCESSING

After graduating from Zhejiang University in 1952, I came to work at the Institute of Petroleum Processing (which was renamed the Dalian Institute of Chemical Physics in 1959) under the CAS in Dalian City and served as a research chemist there. In the 1950s,my research interest was mainly concentrated on synthetic liquid fuels. After the discovery of a large oilfield in the Daqing area in 1960, a great impetus was brought to the

Work Organization at Farm Level： A Process-Led Approach to Understand Land Use Changes

In the French Alps, some grasslands have been abandoned, others are invaded by scrub whereas they are still used by farmers What are the relationships between land use changes and other changes at farm level that lead to scrub invasion？ We hypothesize that they are linked by two work organization processes： process of changes （changes in the household and farm） leading to less intensive land use; and annual processes （sequences of activities during the year） and their repetition from one year to another, leading to insufficient land maintenance. In this paper, we present a study carried out in the Northern French Alps, based on surveys with livestock farmers. It appears that land use changes are often the consequence of other changes made to address work problems, and land use sequences are defined according to workforce and prioritization of tasks. This highlights the importance of considering farmers as workers in order to evaluate land use changes at the farm level and to link them to the human dimension within farming systems.

Humanoid Based Intelligence Control Strategy of Plastic Cement Die Press Work-Piece Forming Process for Polymer Plastics

The plastic cement belongs to a sort of polymer material, the chemical composition is very complex, and the plastic cement work-piece is generally manufactured by die press forming. Aimed at being difficult to control in parameters of forming process, the paper explored the humanoid based intelligence control strategy. In the paper, it made the anatomy in control puzzle resulted in uncertainty such as chemical component of plastic cement etc., summarized up the characteristic of cybernetics in forming process, researched on the humanoid based intelligence control strategy, and constructed the control algorithm of forming process in plastic cement work-piece. Taking the process experiment of temperature and pressure control as an example, it validated the good dynamic and static control quality through simulation of control algorithm constructed in this paper. The experimental results show that the control algorithm explored in this paper is reasonably available.

水利工程质量监督全过程全方位定量评价模型构建

为促进我国水利工程质量监督管理工作运行的高效化,确保工程监督的有效性和权威性,基于AHP(analytic hierarchy process)原理,针对水利部督查小组的现场检查情况,依据水利部下达的相关文件,结合负分制和一票否决制,将定性问题定量化,构建一套涉及水利工程建设、运行、管理全过程全方位的质量监督管理评价模型,共包含7层2112个指标。在综合试错的基础上,计算得出不同层级和不同指标的权重,然后选用该模型分析评价2020年7个省份受督查水利工程项目的质量管理与安全生产管理监督数据,间接说明模型的实用性和易操作性。评价结果表明:7个省份均在合格以上,整体质量管理情况较好,但得分差异显著,其中最高得分90.6、最低得分65.6,相差25分;不同类型管理评价结果显示,安全生产管理得分普遍高于质量管理得分;各参建单位评价结果显示,建设单位和勘察设计单位的情况最优、评分基本达到满分,而质量检测单位和施工单位得分最低、需重点加强相关监管。评价结果为水利工程监督管理工作提供了科学的数据支撑,构建的评价模型也为水利工程质量监督定量化提供了易实操的普适性工具。