Treatment of Wastewater in Chemistry Laboratory through Flocculent Settling and Constructed Wetlands

The basic chemistry laboratories of three colleges and universities in Guizhou Province were investigated completely,especially the pollution situations of the basic chemistry projects were counted,and the discharge amounts of the poisonous and harmful pollutants in the waste liquid from laboratories were monitored and analyzed.On the basis of the summing-up and analysis of the current research findings,a simple and feasible treatment scheme through flocculating,precipitating and constructed wetlands was designed to control the three kinds of excessive pollutants.

Shear hydrophobic flocculation and flotation of ultrafine Anshan hematite using sodium oleate

Effects of stirring speed and time, pH and sodium oleate concentration on the shear hydrophobic flocculation of ultrafine Anshan hematite with sodium oleate as the surfactant were discussed. The results show that these parameters significantly affect the shear hydrophobic flocculation of ultrafine hematite. The optimum conditions for the flocculation are： stirring speed 1 400 r/min, flocculation time 20 min, pH 9 and sodium oleate concentration 3.94×10-4 mol/L; the flotation recovery of hematite flocs is remarkably high compared with non flocculated ultrafine hematite. According to the extended DLVO theory, the total interaction potential of Anshan ultrafine hematite was determined. The calculation results indicate that the hydrophobic flocculation state of the ultrafine hematite-sodium oleate system is mainly dominated by electric double layer repulsive interaction potential and hydrophobic interaction potential. A mechanical agitation is required to impart particles a kinetic energy to overcome potential barrier between them due to the existence of electric double layer repulsive interaction potential. Those particles further approach to form flocs due to the significant increase of the hydrophobic interaction potential.

Biological preparation and application of poly-ferric sulfate flocculant

A novel inorganic polymer flocculant,poly-ferric sulfate（BPFS） was prepared by oxidation of ferrous sulfate using domestic Thiobacillus ferrooxidans（T·f） under acid condition.The optimal conditions for the preparation were pH value of 1.5,（NH4）2SO4 dosage of 0.5 g/L,initial Fe2＋ concentration of 45g/L,inoculum 10%,rotating speed of 120 r/min,reaction time of 5-6 d and reaction temperature of 30 ℃.Under the optimal conditions,the BPFS product with pH value of 1.5-2.2,basicity of 17.5%-22.7% and total iron content of 43.87-45.24 g/L was obtained.The application of the BPFS to three wastewaters was carried out,and the removal efficiencies of COD,decolorization and Zn2＋ by BPFS can be reached 70%,90% and 99%,respectively.The result suggests that the BPFS is an excellent flocculant for water treatment.

Screening of One Microbial Flocculant for Treatment of Methyl Orange Wastewater and its Decolorization Effect

[Objective] To screen out a microbial flocculant with good decolorization effect on methyl orange wastewater,and study the effect of different cultural conditions on decolorization effect of methyl orange.[Method] Absorbance of methyl orange solution before and after decolorization was determined by spectrophotometer,and the decolorization rate was calculated to compare the effects of different cultural conditions on removal rate of methyl orange.[Result]An optimal actinomycete stain（F-1-2） was screened out,and the best cultural condition was as follows：with sucrose as carbon source and NaNO3 as nitrogen source,cultured in constant temperature oscillator at 150 r/min,30℃ for 72 h.Under the optimal condition,the removal rate against methyl orange could reach 68.4%.[Conclusion]Different culture conditions have great impact on decolorization effect of strain.

Isolation and Identification of Bioflocculant Producing Stain and Analysis on Its Flocculating Characteristics

[Objective] The aim was to indentify a bioflocculatnt producing strain W5 isolated from soil samples and analyze its flocculating characteristics. [Method] The universal primers of bacterial 16S rDNA were used for PCR amplification of its genome; effects of the medium pH,carbon and nitrogen sources on its flocculating activity were analyzed by using single factor method; and infrared spectroscopy was used for functional groups analysis. [Result] The results of homology comparison showed that strain W5 belonging to Gram-negative,long bacilli and had 98.34% of homology with Hymenobacter gelipurpurascens,. In addition,the optimum carbon source,nitrogen source,pH for fermentation condition were glucose,yeast extract and pH 7.04,respectively. Microbe flocculant produced by W5 strain （MBF-W5） was extracted and purified to obtain reddish and flocculent products. Fourier-transform infrared （FTIR） spectroscopy indicated that the major functional groups of MBF-W5 were hydroxyl,carboxyl and amino. [Conclusion] More than 85% of flocculating activity was achieved under the conditions of 150-500 μl bioflocculation dosage,5-65 ℃ temperature and pH 2-10.

Screening of a Novel Bioflocculant-producing Strain and Research on Its Flocculation

[Objective] This study aimed to screen a bacterial strain capable of producing bioflocculant. [Method] A bacterial strain T-11 capable of producing bioflocculant was isolated from activated sludge. Detailed tests on the morphological, physiological and biochemical characteristics were carried out and identification was performed to identify the strain. Finally, the bioflocculant was isolated and purified, and the flocculating activity and chemical characteristics were measured. [Result] It was identified as Serratia plumuthica based on its morphological, physiological and biochemical characteristics. This strain secreted flocculant best in a culture medium which included sucrose and NaNO3. The maximal cell growth was achieved within 10 h and the flocculating activity paralleled to it. It was found to be effective for flocculation of kaolin suspension, when added at a final concentration of 0.7 mg/L, over a range of pHs （2-7）, and temperature （approximately 30-80 ℃）. Chemical analysis indicated that the bioflocculant was an acidic polysaccharide consisting of glucose, glucuronic acid and galactose, talose and altrose. Infrared spectrum analysis also revealed typical characteristics of polysaccharides. [Conclusion] The biofloccu- lants produced by strain T-11 can greatly improve the ability of activated sludge to settle.

Dynamic experiments on flocculation and sedimentation of argillized ultrafine tailings using fly-ash-based magnetic coagulant

In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.

Effects of water hardness on selective flocculation of diasporic bauxite

The effect of electrolyte on settling behavior of kaolinite was studied. Effects of hard water on selective flocculation of diasporic bauxite was tested and the measures were taken to eliminate the effects of Ca2＋ and Mg2＋ in hard water. The results indicated that, not only the concentration of electrolyte ions but also the ionic valence of the electrolyte ions affects the settling behavior of kaolinite; hard water significantly affects its selective flocculation owing to Ca2＋ and Mg2＋; general dispersants could not eliminate the effects of Ca2＋ and Mg2＋. Self-made softening agent in our lab could weaken or eliminate the effects of hard water on flocculation processes. The results of molecular dynamics simulation show that softening agent molecules could restrict Ca2＋ and prevent them from playing their roles, so as to eliminate the effects. The continuous pilot experiment results of bauxite flocculation were even better than those obtained in laboratory.

Isolation and Identification of a Flocculant Producing Strain TS-1

[Objective] The purpose was to select out and identify a flocculant producing strain which could produce high active flocculant.[Method] The strain producing high active flocculant was isolated out and purified through medium culture and the selected strain was identified through observing its culture characters and determining its physiological and biochemical property.[Result] Fourteen strains of bacteria with flocculant producing function were isolated from tested soil samples through isolation,purification and preliminary screening using dilution-spread plate method and plate streaking method.Five strains of flocculant producing bacteria showing higher flocculation activity were selected out after second screening and their flocculation rates were higher than 70%;the flocculation activity of one strain among them was still stable after multiple subculturings,its flocculation rate was always above 90% and it was marked as TS-1.TS-1 was encapsulated Gram-positive bacillus and there was no lipid in it,such as poly-β-hydroxybutyric acid.TS-1 was Bacillus amyloliquefaciens,so it was named Bacillus TS-1.[Conclusion] The strain selected out in this experiment could be used in the flocculation and biochemical treatment of wastewater from starch industry.

Microbial flocculant and its application in environmental protection

The microbial flocculant is a kind of natural bio polymer and has promising future to be used in the fermentation industry and wastewater treatment. It has been studied in details in many countries, such as U.S.A, Japan. This paper reviewed the development on microbial flocculant basic studies and applications, including flocculant production microorganisms, chemical and components of microbial flocculants, flocculation mechanism of microbial flocculants, capability of microbial flocculants and influence factors, and culture conditions for flocculant production. The application cases of microbial flocculants were also discussed.

Features and mechanism for coagulation－flocculation processes of polyaluminum chloride

Ｆｅａｔｕｒｅｓａｎｄｍｅｃｈａｎｉｓｍｆｏｒｃｏａｇｕｌａｔｉｏｎ－ｆｌｏｃｃｕｌａｔｉｏｎｐｒｏｃｅｓｓｅｓｏｆｐｏｌｙａｌｕｍｉｎｕｍｃｈｌｏｒｉｄｅＴａｎｇＨｏｎｇｘｉａｏ；ＬｕａｎＺｈａｏｋｕｎ（ＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｏｆＥｎ...

The effect of coupling coagulation and flocculation with membrane filtration in water treatment:A review

Water supply and sanitation demands are foreseen to face enormous challenges over the coming decades to meet the fast growing needs in a global perspective. Significant growth in the industry is predicted and membrane separation technologies have been identified as one of the possible solutions to meet future demands. Application and implementation of membrane technology is expected both in production of potable water as well as in treatment of wastewater. In potable water production membranes are substituting conventional separation technologies due to the superior performance, potential for less chemical use and sludge production, as well as the potential to fulfill hygienic barrier requirements. Membrane bio-reactor （MBR） technology is probably the membrane process which has had most success and has the best prospects for the future in wastewater treatment. Trends and developments indicate that this technology is becoming accepted and is rapidly becoming the best available technology for many wastewater treatment applications. A major drawback of MBR systems is membrane fouling. Studies have shown that fouling mitigation in MBR systems can potentially be done by coupling coagulation and flocculation to the process.

Synthesis and Flocculation Property of Chitosan-Acrylamide Graft Copolymer

Chitosan, as a kind of natural polymer, has many advantages, such as abundant sources, biological degradation, no secondary contamination and facile modification. In this work, we prepared modified chitosan flocculants with double electrical behavior via polymerizing chitosan, acrylamide and sodium carboxymethyl cellulose together by using ammonium persulfate as the indicator in water. The product is a comb-type of chitosan copolymer and a polymeric ampholyte. And then we studied the product by FTIR, UV-Vis, TG, DSC spectrometeries and viscometry, etc. We also performed CACM′s water treat experiment. The effects of pH values, reaction time and dose of the new floccalant on treating various of waste water have been investigated, too.

A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation

In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride（PDADMAC）, high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride（DADMAC） monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include： （a） high purity DADMAC is improved from 57% to 71% ; （b） reaction time of tertiary amine preparation is shortened from 6 h to 7 min; （c） water instead of acetone was used as reaction medium; （d） toxic by-products, wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests.

Characteristics and Culture Conditions of a Bioflocculant Produced by Penicillium sp.

Objective To study the characteristics of a bioflocculant named MBF7 produced by Penicillum strain HHE-P7 and the effects of cultivation conditions on bioflocculant production. Methods The chemical group in the bioflocculant molecules was shown by Fourier transform infrared （FTIR） spectra, and the average molecular weight of MBF7 was estimated by gel permeation chromatography. The effects of medium components on bioflocculant production and flocculating activity were studied. Results Phospho-, amino-, hydroxyl, and carboxyl groups were the major fractions of MBF7, and the molecule weight was about 3.0 × 10^5 Da. In addition, the carbon and nitrogen sources favorable for the bioflocculant production were glucose and yeast extract respectively. When the initial pH of the medium was adjusted to 5.0, high flocculant efficiency could be achieved. Conclusion The bioflocculant MBF7 is a new macromolecule with high flocculating efficiency for Kaolin suspension, and could be produced under appropriate culture conditions.

Improving the sulfidation-flotation of fine cuprite by hydrophobic flocculation pretreatment

Hydrophobic flocculation pretreatment was performed to assess its effect on the recovery of fine cuprite in sulfidation-flotation. The results of the micro-flotation experiment showed that cuprite recovery is related to the particle size, and that an excessive content of fine particles(<18 μm) impacted the recovery of coarse particles. When hydrophobic flocculation pretreatment was used, the recovery of fine cuprite in sulfidation-flotation increased from 60.3% to 86.3% under optimum conditions(pH 9.5; sodium oleate concentration, 2 × 10^(-4) mol×L^(-1); stirring time, 6 min; stirring speed, 1600 r×min^(-1)). The laser particle size analysis and optical microscopy results indicate that hydrophobic flocculation pretreatment effectively reduces the content of fine cuprite, and augments the apparent particle size in the pulp. We performed the Derjaguin–Landau–Verwey–Overbeek(DLVO) theory and extended DLVO theory calculations to further support the interpretation of the results.

Flocculation performance of a novel synthesized flocculant with low ecological risk

Combined flocculants with low ecological risk are urgently required in water supply and wastewater treatment in China. A novel flocculant was thus developed under the condition of low ecological risk(noted as CAS). The experiments to examine wastewater treatment performance of the new product showed that there was favourable performance in the flocculation process in contrast to commercial flocculants in treating kaolin suspensions, municipal effluent and domestic wastewater. Flocculation performance included the turbidity removal rate, sediment character and a decrease in COD(chemical oxygen demand). The sediment time of flocculation is short and the removal rate of turbidity treated by CAS is high compared with PAC(polyaluminum chloride), PAM(polyacrylamide) and the combined addition of PAC and PAM. The optimal concentration required to affect flocculation processes is dependent on kaolin concentration and the character of the wastewater within the range examined. It also showed that CAS is effective to treat wastewater with high turbidity.

Chemical and biological flocculation process to treat municipal sewage and analysis of biological function

The pilot scale experimental apparatus and the procedure of the chemical and biological flocculation process to verify the feasibility in treating Shanghai municipal sewage were introduced in this paper. In addition, the biological function of the process was discussed. The results of optimal running showed that in the reaction tank, the concentration of mixed liquor suspended solid(MLSS) was 2 g/L, hydraulic retention time(HRT) was 35 min, dosage of liquid polyaluminium chloride(PAC) was 60 mg/L, and the concentration of polyacrylamide(PAM) was 0 5 mg/L. The effluent average concentrations of COD Cr , TP, SS and BOD 5 were 50 mg/L, 0 62 mg/L, 18 mg/L, and 17 mg/L, respectively. These were better than the designed demand. In addition, the existence of biological degradation in this system was proven by several methods. The removal efficiencies of the chemical and biological flocculation process were 20% higher than that of the chemical flocculation process above at the same coagulant dosage. The treatment process under different situations was evaluated on a pilot scale experiment, and the results provided magnificent parameters and optimal condition for future operation of the plant.

Characterization of a bioflocculant from a newly isolated Vagococcus sp. W31

Screening of microorganisms producing flocculating substances was carried out. A strain secreting a large amount of bioflocculant was isolated from wastewater samples collected from the Little Moon River in Beijing. Based on the morphological properties and 16S rDNA sequence analysis, the isolate (designated W31) was classified as Vagococcus sp. A bioflocculant (named MBFW31) produced by W31 was extracted from the culture broth by ethanol precipitation and purified by gel chroma-tography. MBFW31 was heat-stable and had strong flocculating activity in a wide range of pH with relatively low dosage re-quirement. MBFW31 was identified as a polysaccharide with molecular weight over 2×106. It contained neutral sugar and uronic acid as its major and minor components, respectively. Infrared spectra showed the presence of hydroxyl, carboxyl and methoxyl group in its molecules. The present results suggested that MBFW31 had potential application in wastewater treatment.

Influence of coarse tailings on flocculation settlement

The composition of tailings particles in mines plays a key role in the flocculation settlement of slurries.To study the influence of coarse particle tailings(CPTs)on the flocculation settlement of tailings slurries(TSs),static flocculent settling tests,scanning electron microscopy observations,and laser particle size analyses were conducted using the tailings obtained from a copper mine.The results demonstrate that(i)in the accelerated and free settling process,CPTs did not directly settle at the bottom of graduated cylinders;instead,they were netted by the flocculent structures(FSs)and settled together more quickly.The CPTs accelerate the rapid settlement of TSs;the acceleration effect is more obvious when the CPTs content is greater than 50 wt%.(ii)The most appropriate flocculant unit consumption(FUC)is 20 g·t-1,and no substantial increase is observed in the flocculant settling velocity with an increase in the flocculant because the effective FSs did not substantially change and thus did not lead to a notable increase in the settling velocity of the solid–liquid interface(SLI).(iii)In the effective settling space of the thickening facility,free water quickly flowed from the pores of FSs,which is reflected in the period from 0 to 1 min.