Mitigation of Optical Multipath Interference Algorithms in IM-DD Transmission System

This paper aimed to propose two algorithms,DA-M and RF-M,of reducing the impact of multipath interference(MPI)on intensity modulation direct detection(IM-DD)systems,particularly for four-level pulse amplitude modulation(PAM4)systems.DA-M reduced the fluctuation by averaging the signal in blocks,RF-M estimated MPI by subtracting the decision value of the corresponding block from the mean value of a signal block,and then generated interference-reduced samples by subtracting the interference signal from the product of the corresponding MPI estimate and then weighting factor.This paper firstly proposed to separate the signal before decision-making into multiple blocks,which significantly reduced the complexity of DA-M and RF-M.Simulation results showed that the MPI noise of 28 GBaud IMDD system under the linewidths of 1e5 Hz,1e6 Hz and 10e6 Hz can be effectively alleviated.

Improving Network Availability through Optimized Multipath Routing and Incremental Deployment Strategies

Currently,distributed routing protocols are constrained by offering a single path between any pair of nodes,thereby limiting the potential throughput and overall network performance.This approach not only restricts the flow of data but also makes the network susceptible to failures in case the primary path is disrupted.In contrast,routing protocols that leverage multiple paths within the network offer a more resilient and efficient solution.Multipath routing,as a fundamental concept,surpasses the limitations of traditional shortest path first protocols.It not only redirects traffic to unused resources,effectively mitigating network congestion,but also ensures load balancing across the network.This optimization significantly improves network utilization and boosts the overall performance,making it a widely recognized efficient method for enhancing network reliability.To further strengthen network resilience against failures,we introduce a routing scheme known as Multiple Nodes with at least Two Choices(MNTC).This innovative approach aims to significantly enhance network availability by providing each node with at least two routing choices.By doing so,it not only reduces the dependency on a single path but also creates redundant paths that can be utilized in case of failures,thereby enhancing the overall resilience of the network.To ensure the optimal placement of nodes,we propose three incremental deployment algorithms.These algorithms carefully select the most suitable set of nodes for deployment,taking into account various factors such as node connectivity,traffic patterns,and network topology.By deployingMNTCon a carefully chosen set of nodes,we can significantly enhance network reliability without the need for a complete overhaul of the existing infrastructure.We have conducted extensive evaluations of MNTC in diverse topological spaces,demonstrating its effectiveness in maintaining high network availability with minimal path stretch.The results are impressive,showing that even when implemented on just 60%of nodes,our incremental deployment method significantly boosts network availability.This underscores the potential of MNTC in enhancing network resilience and performance,making it a viable solution for modern networks facing increasing demands and complexities.The algorithms OSPF,TBFH,DC and LFC perform fast rerouting based on strict conditions,while MNTC is not restricted by these conditions.In five real network topologies,the average network availability ofMNTCis improved by 14.68%,6.28%,4.76%and 2.84%,respectively,compared with OSPF,TBFH,DC and LFC.

Theory of Dynamics In-Phase Locking and Quasi-Period Synchronization in Two Mutually Coupled Multi-Quantum-Well Lasers

Abstract We study dynamics in two mutually coupling multi-quantum-well lasers. We carry out theoretical and numerical analysis of synchronization, anti-synchronization, in-phase locking in the two identical lasers but detuning, in detain. It is proved that the coupling level determines stability of the lasers by analyzing the eigenvalue equation. Critical case of locking is discussed via the phase difference equation. Quasi-period and stable states in the two lasers are investigated via varying the current, detuning and coupling level.

Characteristic Surface Oxide Film Cracking Behavior of a Fe-Ni-Cr Alloy under In-phase and Out-of-phase Thermo-mechanical Fatigue

The surface oxide film cracking behavior of Fe-30Ni-20Cr alloy under in-phase and out-of-phase synchronizing thermal cycling with mechanical cycling was studied.Surface oxide film cracking along the grain boundary under in-phase overlapping was creep predominant fracture mechanisms.Strongly induced slip lines preceding were accompanied by the surface oxide film cracking under Out-of phase,and the shear cracking was dominant mode.Negative mean stress could counteract a part of the tensile component of alternative stress,so as to delay the cracking process under in-phase,but positive mean stress overlapping the tensile alternative stress could accelerate the cycling cracking process under out-of-phase.

On the Sub-Critical Bifurcation of Anti-Phase and In-Phase Synchronized Vortex Shedding Forms

Transition of flows past a pair of side-by-side circular cylinders are investigated by numerical simulations and the bifurcation analysis of the numerical results. Various flow patterns behind the cylinder-pair have been identified by the gap ratio (G) and Reynolds number (Re). This study focus on transition of in-phase and anti-phase vortex shedding synchronized forms. A nested Cartesian-grid formulation, in combination with an effective immersed boundary method and a two-step fractional-step procedure, has been adopted to simulate the flows. Numerical results reveal that the in-phase and anti-phase vortex shedding flows at Re = 100 can co-exist at 2.08 ≤G≤ 2.58. Hysteresis loop with increasing/decreasing G at constant Reynolds number Re = 100 is reported.

Design of Seven-core Photonic Crystal Fiber with Flat In-phase Mode for Yb: Fiber Laser Pumping

We numerically investigate the seven-core photonic crystal fiber (PCF) with the zero dispersion wavelength designed in the range of 1000 - 1080 nm, particularly suitable for the ytterbium-doped fiber laser pumping. Also, the PCFs are well designed for obtaining a flat in-phase mode by carefully adjusting the diameter of inner layer six holes, and the corresponding empirical values of fiber structure are summarized and listed. The variations of inner six holes to the amplitude of in-phase mode are further investigated, and our results show that a better tolerance can be achieved in the fiber structures with lower filling ratio configuration.

Physical-Layer Key Generation Based on Multipath Channel Diversity Using Dynamic Metasurface Antennas

Physical layer key generation(PKG)technology leverages the reciprocal channel randomness to generate the shared secret keys.The low secret key capacity of the existing PKG schemes is due to the reduction in degree-of-freedom from multipath fading channels to multipath combined channels.To improve the wireless key generation rate,we propose a multipath channel diversity-based PKG scheme.Assisted by dynamic metasurface antennas(DMA),a two-stage multipath channel parameter estimation algorithm is proposed to efficiently realize super-resolution multipath parameter estimation.The proposed algorithm first estimates the angle of arrival(AOA)based on the reconfigurable radiation pattern of DMA,and then utilizes the results to design the training beamforming and receive beamforming to improve the estimation accuracy of the path gain.After multipath separation and parameter estimation,multi-dimensional independent path gains are utilized for generating secret keys.Finally,we analyze the security and complexity of the proposed scheme and give an upper bound on the secret key capacity in the high signal-to-noise ratio(SNR)region.The simulation results demonstrate that the proposed scheme can greatly improve the secret key capacity compared with the existing schemes.

基于毫米波雷达的非视距目标探测和定位方法研究

隐蔽非直视目标探测和定位技术在城市巷战、安防、防暴等领域具有广泛的应用。本文针对L形非视距区域内单目标的探测与定位问题进行研究。首先,对雷达布设位置及可探测区域进行了分析;其次,针对共同可探测区域,设计了多路径联合检测器;最后,基于设计的多径雷达应用系统,利用所提检测定位方法进行实验验证。与现有研究相比,本文的创新点在于:在L形非视距场景下,对宽波束毫米波雷达布设位置及可探测区域进行分析并给出合理建议;其次利用所提多路径联合检测器将不同反射面的多条路径联合使用,提高了检测性能。本文通过实验验证了系统的可靠性及雷达位置对可探测区域的影响,通过仿真与实验探究了所提检测器的性能改善。

UHF波段无源雷达低仰角波瓣分裂现象分析及校正方法

针对低频段无源雷达低仰角远程预警探测时波瓣分裂影响俯仰向探测空域覆盖的问题,提出了一种波瓣分裂校正方法.首先分析了波瓣分裂形成原因和影响因素;然后基于阵列流型拟合思想,提出了一种利用最小二乘法求解变换矩阵的校正方法;最后通过仿真分析了角度量化间隔、角度变换区间对校正误差的影响,验证了校正方法的有效性.这对改进基于数字广播电视信号的无源雷达性能提供了参考.

弱全局信息下巨星座多路并发熵均衡路由策略

为保障地面系统对巨星座信息的高效获取,考虑实际卫星感知能力的约束,提出一种弱全局信息下巨星座多路并发熵均衡路由策略。首先,根据星座运行模式构建簇群,同时考虑簇的感知能力,建立弱全局信息下的“星-星/星-地”数据传输模型。其次,综合考虑网络结构、数据流量分布和信息多点频发等因素,对现有算法进行改进,引入熵作为评估节点负载分布均匀度的量化指标,引入惩罚因子对路径成本进行动态调整,并通过滚动窗口法规划巨星座多路并发情况下的对地传输路径。最后,以Starlink一期部署的卫星为例,进行数值仿真,验证所提方法的有效性。

典型高铁线路城区场景多径能量分布研究

在高铁列车运行场景中,研究多径能量分布有助于设计、优化无线通信系统。利用射线跟踪技术,在5G-R系统2.1GHz频段开展无线信道仿真研究,从射线跟踪计算结果中分类统计不同类型地物多径能量,对典型高铁线路城区场景的空间域特征和多径能量分布进行分析。研究表明:在密集城区高架桥场景下,多径能量的来源主要是结构模型、城市开阔区域反射体和建筑物,其分别占据总能量的58%、32%和10%,其余绿地等地物类型产生的多径能量可以忽略不计;而在开阔城区场景下,绿地产生的多径能量占比为14%,远高于密集城区场景下的1%,因此不能忽略绿地等地物类型的影响。该研究成果对射线跟踪技术在场景建模方面的轻量化处理具有参考价值,可为高速铁路5G-R的设计和优化提供技术支撑。

基于伪卫星高精度定位的基坑支护位移变化感知

为了进一步提升复杂施工环境基坑监测结果的准确性和提高自动化程度,本文采用伪卫星独立组网技术对基坑支护水平位置变化进行长期监测。首先,建立相对定位观测方程,基于已知点初始化方法固定出模糊度参数;其次,对相对定位中的载波双差多路径误差进行建模并修正;最后,利用无迹卡尔曼滤波(UKF)消除观测模型的线性化误差,获得最终的定位结果,并将该结果与真实位移进行比较。结果表明,伪卫星高精度定位系统可以有效感知基坑支护的微小位移,其绝对误差基本稳定在0.1 mm以内,平均相对误差约为10%。

一种基于动态门限与LMS算法相结合的多径干扰抑制算法

在船舰行驶过程中,信号的传输在岛屿反射与海面散射影响下易产生多径效应,使船舰的无线地空数据接收系统受到影响。为提高接收机的接收性能,首先完成了多径信道的建模,搭建了三径信道模型,并在此模型下,将动态门限法与最小均方(LMS)算法进行改进结合,并用此算法完成了信号处理的研究与仿真。仿真结果表明,所提算法优化方案可以提高在此种情况下信号接收系统的准确性。

北斗系统GEO卫星伪距多路径误差改正

北斗系统地球静止轨道(GEO)卫星因相对于地面近似静止,其多路径误差相对于其他类型较为严重,且表现出系统波动现象。为提升定位精度,本文在GEO卫星伪距多路径误差特征研究的基础上,采用奇异谱分析方法对其进行修正,并通过伪距单点定位(SPP)验证伪距多路径误差修正效果。选取测站CUT0连续10d的静态观测数据进行修正试验。研究发现,GEO卫星伪距多路径误差序列表现出较强的天重复性,且多路径误差中的系统误差项越大,重复性也越强;在运用奇异谱分析方法修正GEO卫星伪距多路径误差各系统误差项后,多路径组合(MP)观测值和SPP的定位精度均有一定程度提升。

基于Multipath的煤矿巷道三维模型构建方法

针对现有煤矿巷道三维模型存在灵活性和可移植性差、数据更新维护困难等问题,提出了一种基于Multipath的煤矿巷道三维模型构建方法。该方法通过定义点弧拓扑数据模型,将煤矿CAD格式数据转换为Geodatabase中的要素类,利用开发的ArcGIS Engine程序、通过插入节点坐标生成巷道三维模型,实现了煤矿巷道自动建模,有效减少了巷道三维建模的工作量。

Modeling GPS multipath effect based on spherical cap harmonic analysis

Most GPS positioning errors can be eliminated or removed by the differential technique or the modeling method,but the multipath effect is a special kind of system or gross error,so it is difficult to be simulated or eliminated.In order to improve the accuracy of GPS positioning,the single-epoch pseudorange multipath effects at GPS station were calculated,and firstly modeled based on the spherical cap harmonic（SCH）,which is the function of satellite longitude and latitude with the robust method.The accuracy of the kinematic point positioning technique was improved by correcting pseudorange observations with the multipath effect calculated by the SCH model,especially in the elevation direction.The spherical cap harmonic can be used to model the pseudorange multipath effect.

Hybrid particle filtering algorithm for GPS multipath mitigation

An altemative algorithm for mitigating GPS multipath was presented by integrating unscented Kalman filter （UKF） and wavelet transform with particle filter. Within consideration of particle degeneracy, UKF was taken for drawing particle. To remove the noise from raw data and data processing error, adaptive wavelet filtering with threshold was adopted while data preprocessing and drawing particle. Three algorithms, named EKF-PF, UKF-PF and WM-UKF-PF, were performed for comparison. The proposed WM-UKF-PF algorithm gives better error minimization, and significantly improves performance of multipath mitigation in terms of SNR and coefficient even though it has computation complexity. It is of significance for high-accuracy positioning and non-stationary deformation analysis.

基于细粒化特征感知的水下目标检测算法

针对水下光学图像细节模糊以及水下生物遮挡导致目标检测精度低的问题,提出一种基于细粒化特征感知的水下目标检测算法.该算法基于YOLO(You Only Look Once)v7网络结构,首先,提出ELSA(ELAN-SimAM)模块,提升主干网络对水下图像模糊细节的特征感知;其次,提出多梯度聚合结构(Multi-gradient Aggregation Structure),实现特征信息多梯度高效融合,并在颈部网络中嵌入轻量化的三重注意力机制(Triplet Attention),使特征信息跨维度交互融合,减少由水下生物遮挡导致的漏检问题.实验结果表明,所提出的算法适用于水下复杂环境下的目标检测,可以在较短时间内实现目标定位与检测,且检测精度较高.

多路径误差对BDS-3变形监测精度的影响

为定量分析BDS-3观测值多路径误差对变形监测精度的影响,选取包含7个站点的某水利工程2022年共128 d的BDS-3监测数据,对监测站点周围树木裁剪树枝前后BDS-3观测值多路径误差、变形监测精度及二者的相关性进行研究。结果表明:1)多路径误差与BDS-3变形监测精度间存在强相关性,与其平面和高程精度的相关系数分别大于0.93和0.81;2)监测站点周围树枝裁剪后,使用B1I和B3I观测值的平均多路径误差从0.676 m、0.426 m降低至0.329 m、0.230 m,N、E、U方向的平均监测精度分别达0.9 mm、0.8 mm、1.7 mm和1.1 mm、1.0 mm、2.2 mm,较裁剪树枝前分别提高63%、69%、58%和52%、61%、48%;3)改变周围观测环境削弱多路径误差的影响后,使用B1I观测值的精度优于使用B3I观测值的精度,因此在BDS-3短基线变形监测的应用中推荐使用B1I观测值。

基于NS-3网络模拟器的MPQUIC协议仿真研究

随着5G移动视频应用加速落地以及国内视频流需求的迅速激增,迫切需要一种新的数据传输协议来提供可靠的安全性,以保障上层应用处理更多的接入连接以及满足更低的延时需求.多路径QUIC协议(Multipath Quick UDP Internet Connection,MPQUIC)具有拟合多条链路带宽资源、强大连接的容错能力和高可靠性等优点,被认为将在未来移动互联网数据传输中发挥重要的作用.然而,目前国内外研究人员对于MPQUIC协议的相关研究正处于初步阶段,该协议还没有一个普适性的、开源的仿真平台.因此,借助全球网络仿真领域应用最广的NS-3网络模拟器搭建了MPQUIC仿真平台(ns3-mpquic),为相关学者提供研究MPQUIC协议的开源、免费、普适的基础平台,为全球专家学者对MPQUIC协议的模拟部署和优化提供助力.