A New Method for In-Situ Measurement of Internal Solitary Waves Based on the Stimulated Raman Scattering in Optical Fibers

In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.

In-situ Raman observation on crack tips of Vickers indent in PLZT ceramics

Vickers indentation was introduced into the originally in-plane and out-of-plane poled PLZT ceramics.The Raman spectra were in-situ recorded at selected crack tips before and after the indentations,as well as after the applications of external electric field.The results show that the changes in Raman intensities of optical modes could be sensitively related to 90° domain switching around the crack tips which are strongly dependent on the directions of original polarization and geometric locations.When the direction of electric field was perpendicular to the direction of original polarization,the 90° domain switching at crack tips of the Vickers indentation on the originally in-plane poled PLZT ceramics caused most significant change in the Raman intensity,which inhibited the crack growth.However,when the direction of electric field was parallel to the direction of original polarization,the growth of crack tips became predominantly without the 90° domain switching,which led to the crack growth.

In-situ electrochemical surface-enhanced Raman spectroscopy in metal/polyelectrolyte interfaces

Polyelectrolyte becomes more and more popular in electrocatalysis.The understanding of electrode/polyelectrolyte interfaces at the molecular level is important for guiding further the polyelectrolyte-based electrocatalysis.Herein,we demonstrate an in-situ surface-enhanced Raman spectroscopic method by using a three-electrode spectroelectrochemical cell towards characterizing the electrode/polyelectrolyte interfaces.The Ag/AgCl and Ag/Ag_(2)O electrodes are used as the reference electrode in the acidic and the alkaline systems,respectively.The working electrode is made of a transparent carbon thin film which loads the electrocatalysts.The applications of this method are demonstrated through the in-situ characterizations of the p-methylthiophenol adsorbed on the Au and Pt and the electrochemical oxidation of Au on polyelectrolyte membranes.The potential-dependent spectral features of these two systems show that this method is a powerful tool for investigating the electrode/polyelectrolyte interfaces in electrocatalysis.

Integration of a fused silica capillary and in-situ Raman spectroscopy for investigating CO_(2) solubility in n-dodecane at near-critical and supercritical conditions of CO_(2)

To determine the solubility of CO_(2)in n-dodecane at T=303.15-353.15 K,P≤11.00 MPa,an integrated fused silica capillary and in-situ Raman spectroscopy system was built.The Raman peak intensity ratio(I_(CO_(2))/IC-H)between the upper band of CO_(2)Fermi diad(I_(CO_(2)))and the C-H stretching band of n-dodecane(IC-H)was employed to determine the solubility of CO_(2)in n-dodecane based on the calibrated correlation equation between the known CO_(2)molality in n-dodecane and the I_(CO_(2))/IC-Hratio with R^(2)=0.9998.The results indicated that the solubility of CO_(2)decreased with increasing temperature and increased with increasing pressure.The maximum CO_(2)molality(30.7314 mol/kg)was obtained at 303.15 K and7.00 MPa.Finally,a solubility prediction model(lnS=(P-A)/B)based on the relationship with temperature(T in K)and pressure(P in MPa)was developed,where S is CO_(2)molality,A=-8×10^(-6)T^(2)+0.0354T-8.1605,and B=0.0405T-10.756.The results indicated that the solubilities of CO_(2)derived from this model were in good agreement with the experimental data.

IN-SITU REFLECTION MICROSCOPIC FTIR SPECTROELECTROCHEMISTRY AT MICRO-/ULTRAMICROELECTRODE

An in-situ reflection ultramicroelectrode microscopic FTIR spectroelectrochemical cell was constructed and demonstrated by using hexacyanoferrate redox couple in aqueous sulphate solution.An excellent microscopic SNIFTIRS reflection spectra had been obtained with no difficulty of IR beam focusing.The cell is simple in construction and convenient for use,And it will have most of all advantages of micro-/ultramicroelectrode.

Electrochemistry and In-situ Spectroelectrochemistry Studies of Carbazole and 9-Ethylcarbazole

Mechanisms of electron transfer of carbazole （CZ） and 9-ethylcarbazole （ECZ） were studied by electrochemistry and in-situ spectroelectrochemistry. The result indicated that the electrochemical reaction mechanism of ECZ was the same as that of CZ. Both of them undergo ECE process： the initial step is removal of one electron to generate very reactive cation radical, this species then proceeded by deprotonation-coupling reaction to form the corresponding dimer, which was oxidized continuously.

IN-SITU TIME-RESOLVED RAMAN SPECTROSCOPIC STUDIES OF SILVER ELECTRODE IN NaSCN SOLUTION

In-situ time-resolved Raman spectroscopy(TRRS)has been applied on studies of electrochemical adsorption of thiocyanate at silver electrode during potential cycles and potential step.It is shown that some dynamic information about the adsorption and desorption processes can be obtained.

Cu,Zn-SOD在银电极上的原位表面增强Raman光谱

本文应用原位共焦拉曼光谱技术观察了Cu ,Zn -SOD分子在经表面增强处理后的银电极上 ,吸附状态随电位跃迁变化的过程。结果表明在 -0 2V～ 0 1V的电位区间内 ,Cu,Zn -SOD分子经由羧酸根离子吸附于银电极表面 ,而在 0 2～ 0 4V电位区间内发生脱附 ,表面吸附的物种改变为缓冲溶液中的磷酸根离子。上述结果为SOD分子在固体电极表面电子传递机制的探索提供了依据。

Hydrogen evolution reaction activity enhancement from active site turnover mechanism

Although heteroatom doping is an effective way to improve the catalytic activity of transition metal phosphides(TMPs),the mechanism of activity enhancement needs to be further refined.To this end,we synthesized a Co-doped Ni_(2)P catalyst as a research model and found that the introduction of heterogeneous Co reconstructed the charge distribution around the P site,which effectively enhanced the hydrogen evolution reaction(HER)activity of the pure Ni_(2)P.Based on in-situ Raman real-time monitoring technology,we monitored for the first time that Co doping triggered a switch of the active site(from the original Co-active site to the P-active site),which promoted the adsorption of H_(2)O to enhance the HER activity.The density functional theory(DFT)calculations indicated that the P site of Co-Ni_(2)P expressed the highest activity and the Ni site of pure Ni_(2)P expressed the highest activity,which further confirms the in-situ Raman monitoring results.The active site turnover mechanism discovered in this study will undoubtedly provide more rational and targeted ideas for future catalyst design.

Advancing Energy Systems with In-Situ and Operando Surface-Enhanced Raman Scattering Spectroscopy

Surface-enhanced Raman scattering spectroscopy(SERS)has emerged as a powerful analytical technique to enable nanoscale investigations of energy systems.This mini-review focuses on the applications of in-situ and operando SERS in energy-related research,highlighting its unique capabilities and significant contributions to understanding energy storage and conversion processes.We first introduce the fundamental principles of SERS,key SERS-derived techniques,and commonly employed platforms.Subsequently,we delve into the diverse applications of in-situ and operando SERS across various energy systems,encompassing photocatalytic and electrocatalytic systems,fuel cells,solar cells,and batteries.Finally,we conclude with our perspective on the current challenges and prospects in this area.We hope thismini-review serves as an essential overview to guide the design and implementation of in-situ and operando SERS studies of energy systems.

Direct identification of the carbonate intermediate during water-gas shift reaction at Pt-NiO interfaces using surface-enhanced Raman spectroscopy

Noble metal-reducible oxide interfaces have been regarded as one of the most active sites for water-gas shift reaction.However,the molecular reaction mechanism of water-gas shift reaction at these interfaces still remains unclear.Herein,water-gas shift reaction at Pt-NiO interfaces has been in-situ explored using surface-enhanced Raman spectroscopy by construction of Au@Pt@NiO nanostructures.Direct Raman spectroscopic evidence demonstrates that water-gas shift reaction at Pt-NiO interfaces proceeds via an associative mechanism with the carbonate species as a key intermediate.The carbonate species is generated through the reaction of adsorbed CO with gaseous water,and its decomposition is a slow step in water-gas shift reaction.Moreover,the Pt-NiO interfaces would promote the formation of this carbonate intermediate,thus leading to a higher activity compared with pure Pt.This spectral information deepens the fundamental understanding of the reaction mechanism of water-gas shift reaction,which would promote the design of more efficient catalysts.

In-situ FTIR Spectroelectrochemical and Electrochemical Studies of Ferrocene and Derivatives at a Platinum Electrode

Redox mechanism of ferrocene, acetylferrocene, ferrocenyl cinnamenyl ketone at a platinum electrode was studied with cyclic voltammetry (CV) and in-situ Fourier transform infrared (FTIR) spectroelectrochemistry. The IR bands in the range of 2000-1000 cm-1 attributed to the stretching and ring vibrations of these materials show the main spectral changes in the processes.

Zeolite-mediated hybrid Cu^(+)/Cu~0 interface for electrochemical nitrate reduction to ammonia

The electrocatalytic conversion of reactive nitrogen species to ammonia is a promising strategy for efficient NH_(3) synthesis.In this study,we reveal that the hybrid Cu^(+)/Cu~0 interface is catalytically active for electrochemical ammonia synthesis from nitrate reduction.To maintain the hybrid Cu^(+)/Cu~0 state at negative reaction potentials,hydrophilic zeolite is used to modify Cu/Cu_(2)O electrocatalyst,which demonstrates an impressive NH_(3) production rate of 41.65 mg h^(-1) cm^(-2)with ~100% Faradaic efficiency of ammonia synthesis at-0.6 V vs.RHE.In-situ Raman spectroscopy unveil the high activity originates from the zeolite reconstruction at the electrode–electrolyte interface,which protects the valence state of Cu~0/Cu^(+) site under negative potential and promotes electrochemical activity towards NH_(3) synthesis.

Surface reconstruction of Se-doped NiS_(2) enables high-efficiency oxygen evolution reaction

Surface reconstruction of electrocatalysts has been widely witnessed during the electrochemical processes.Here,NiS_(2),NiSe_(2), and Se doped NiS_(2)(Se-NiS_(2)) are fabricated for oxygen evolution reaction(OER) through a mild sulfuration and/or selenylation process of Ni(OH)_(2) supported on carbon cloth(CC).Through careful in-situ Raman spectroscopy and ex-situ X-ray photoelectron spectroscopy,surface reconstruction of NiS_(2),NiSe_(2),and Se-NiS_(2) during the OER process has been revealed.A potentialdependent study shows that Se-NiS_(2) undergoes surface evolution at lower potentials and requires the lowest potential for conversion to NiOOH as a highly OER-active species,accompanied by the leaching of SO_(4)^(2-) and SeO_(4)^(2-) that can again be adsorbed on the catalyst surface to enhance the catalytic activity.Density functional theory(DFT) calculations confirm that Se-NiS_(2) is more susceptible to surface oxidation through the OER process.Therefore,Se-NiS_(2) exhibits outstanding OER activity and stability in alkaline conditions,requiring an overpotential of 343 mV at a current density of 50 mA cm^(-2).A novel insight is provided by our work in understanding the surface reconstruction and electrocatalytic mechanism of Ni-based chalcogenides.

Improving the activity of electrochemical reduction of CO_(2) to C_(1) products by oxidation derived copper catalyst

Cu-based electrocatalysts have become the focus in the field of electrochemical CO_(2) reduction reaction(ECO_(2) RR)due to their ability to produce multicarbon products.However,the research on generating single carbon products with higher economic feasibility via ECO_(2) RR based on Cu-based electrocatalysts is rather rare,and the roles of the surface architecture and oxides of the electrocatalysts have not been explained exactly.In this work,a two-step method including thermal oxidation and electroreduction is proposed to introduce Cuþinto pure Cu foil to form Cu_(2)O/Cu electrocatalyst.By regulating the surface composition and morphology of the electrocatalyst in this way,the activity of ECO 2 RR to C_(1) products has been greatly improved.The Faradaic efficiency of carbon products of the Cu_(2)O/Cu electrode reaches 84%at?0.7 V vs.RHE with good selectivity for HCOOH and CO.The current density of Cu_(2)O/Cu electrode reaches-12.21 mA cm^(2) at-0.8 V vs.RHE,which is much higher than that of the Cu foil electrode(?0.09 mA cm?2).In-situ Raman characterization shows that Cuþin Cu_(2)O/Cu electrode could inhibit hydrogen generation and promote ECO_(2) RR by stabilizing the adsorption of CO_(2).

电化学原位拉曼光谱技术对金电极表面生物分子吸附行为研究

报道腺嘌呤在裸金电极及其修饰的金电极上的电化学原位拉曼光谱图 ,着重分析了不同电位下腺嘌呤和超氧化物歧化酶在金电极上的吸附及其相互作用 ,初步讨论了腺嘌呤对促进超氧化物歧化酶电子传递过程的作用机制 .

普鲁士蓝膜修饰铂电极的现场拉曼光谱电化学表征(英文)

采用现场拉曼光谱电化学技术表征了普鲁士蓝膜修饰铂电极的循环伏安过程 .结果显示 ,随着修饰膜的微观结构由普鲁士蓝向普鲁士白或相反过程转化 ,表征两种不同结构的拉曼特征振动谱峰及其强度变化呈现出明显的可逆特征 .

电化学原位拉曼光谱技术在高温熔盐中的应用

综述了熔盐电化学原位拉曼光谱用样品池结构及特点、熔盐电化学原位拉曼光谱的研究进展。所用样品池主要以配合90°拉曼散射模式研究为主,且样品池通常都通入惰性气体。研究中主要采用恒电流/恒电位电解的电化学方法,研究内容涉及到在氯化物熔盐中电解还原金属铝、汞、镉和钽的阴极行为,(Li-K)CO3和Li2CO3燃料电池中氧的还原,在以金属铝为阳极的高能熔盐电池中I2在AlCl3-NaCl熔盐中的电化学过程,钠-硫电池放电过程中S元素在AlCl3-NaCl熔盐中的行为,Y2O3稳定的ZrO2(YSZ)氧离子导体在Na2SO4熔盐中的电化学腐蚀,以及不同电位条件下熔融KNO3、NaNO3与铂电极界面的熔盐结构变化。最后,展望了熔盐电化学原位拉曼光谱的研究发展方向。

单晶电极界面反应过程的电化学原位拉曼光谱研究

自20世纪70年代起,人们利用原位光谱技术(拉曼、红外等)对电化学界面进行了系统的研究,进而发展出原位谱学电化学的研究方向,由于其具有良好的表面灵敏度和能量分辨率,可以提供更多的表面反应信息,进而从微观上揭示反应机理.伴随着纳米技术的兴起,表面增强拉曼光谱技术取得了快速的发展.近来,壳层隔绝纳米粒子增强拉曼光谱(shell-isolated nanoparticle-enhanced Raman spectroscopy,SHINERS)技术更是得到人们的广泛关注.SHINERS的出现为研究单晶模型电极上的催化反应提供了一种非常好的原位光谱技术.本文主要对原位电化学SHINERS技术在单晶电极界面研究的具体应用及其发展前景进行相关论述.

A Li-S battery with ultrahigh cycling stability and enhanced rate capability based on novel ZnO yolk-shell sulfur host

Currently,lithium-sulfur(Li-S)batteries still suffer from fast capacity decay,poor coulombic efficiency(CE)and short cycling lifespan,which result from the severe shuttle effect issue caused by high solubility and rapid diffusion of lithium polysulfides(Li PSs)in organic electrolytes.Here,yolk-shell zinc oxide(YSZn O)spheres are synthesized and for the first time,applied as a host for Li-S batteries to tackle this challenge.The polar Zn O exhibits high chemical anchoring ability toward Li PSs while the unique yolk-shell structure not only provides an additional physical barrier to Li PSs but also enables much more uniform sulfur distribution,thus significantly suppressing Li PSs shuttling effect meanwhile promoting sulfur conversion reactions.As a result,the YS-Zn O enables the Li-S battery to display an initial specific capacity of1355 m Ah g^(-1) and an outstanding capacity retention capability(~89.44%retention rate)even after 500 cycles with the average CE of~99.46%at the current of 0.5 C.By contrast,the capacity of conventional-Zn O-nanoparticles based battery severely decays to 472 m Ah g^(-1) after cycling for 500 times.More impressively,the S/YS-Zn O based Li-S battery can maintain a low decay rate of 0.040%every cycle and high average CE of 98.82%over 1000 cycles at 3 C.