The crosslinked chitosan was grafted by 4＇-formal benzo-15-crown-5 to obtaine crosslinked chitosan with 4＇-formal benzo- 15-crown-5（CCTS-N=CH-B- 15-C-5）. Then it was loaded with palldium chloride to gain the heter...The crosslinked chitosan was grafted by 4＇-formal benzo-15-crown-5 to obtaine crosslinked chitosan with 4＇-formal benzo- 15-crown-5（CCTS-N=CH-B- 15-C-5）. Then it was loaded with palldium chloride to gain the heterogeneous catalyst, which was easily isolated from the reaction system. The influences of the Pd content of the catalyst, solvent, and temperature on asymmetric hydrogenation of a-phenylethanone have been studied. The catalyst has been found to catalyze the hydrogenation ofa-phenylethanone into the chiral alcohol, α-phenyl ethanol under the mild condition. The optical yield of （R）- 1-phenylethanol could be obtained as 97.1% under the following conditions： temperature, 30℃; solvent, ethanol; Pd content, 1.43 mmol/g; substrate concentration, 0.02 g/mL due to the cooperative effect of crown ether and chitosan polymer. The stability of this catalyst was also studied at the same time. This chiral natural crosslinked chitosan-palladium complex catalyst could be reused without appreciable change in optical catalytic activity, which will be useful for designing crosslinked-chitosan-based adsorption for metal ions for asymmetric hydrogenation.展开更多
Alkylation of benzene with propylene was carried out with FeCl_(3)-chloro-butyl-pyridine(FeCl_(3)-[bpc])ionic liquid as catalyst to obtain cumene.Significant improvements in propylene conversion and cumene selectivity...Alkylation of benzene with propylene was carried out with FeCl_(3)-chloro-butyl-pyridine(FeCl_(3)-[bpc])ionic liquid as catalyst to obtain cumene.Significant improvements in propylene conversion and cumene selectivity under mild reaction conditions were attained by modification of the catalyst with HCl.Under 20℃,0.1 MPa,reaction time 5 min,mole ratio of benzene to propylene 10:1 and mass ratio of FeCl_(3)-[bpc]to benzene 1:100,conversion of propylene can increase from 83.60%to 100.00%and selectivity of cumene can increase from 90.86%to 98.47%.If reaction is carried out in following two stages,the result will be very good.At the initial stage of the reaction,alkylation is the main reaction and a higher conversion of propylene is obtained at a lower tem-perature.At the later stage of the reaction,transalkylation is the main reaction and selectivity to cumene can be increased by appropriately raising the reaction temperature.展开更多
基金Funded by the State Educational Committe Doctoral Foundation of China(No.2000048615)
文摘The crosslinked chitosan was grafted by 4＇-formal benzo-15-crown-5 to obtaine crosslinked chitosan with 4＇-formal benzo- 15-crown-5（CCTS-N=CH-B- 15-C-5）. Then it was loaded with palldium chloride to gain the heterogeneous catalyst, which was easily isolated from the reaction system. The influences of the Pd content of the catalyst, solvent, and temperature on asymmetric hydrogenation of a-phenylethanone have been studied. The catalyst has been found to catalyze the hydrogenation ofa-phenylethanone into the chiral alcohol, α-phenyl ethanol under the mild condition. The optical yield of （R）- 1-phenylethanol could be obtained as 97.1% under the following conditions： temperature, 30℃; solvent, ethanol; Pd content, 1.43 mmol/g; substrate concentration, 0.02 g/mL due to the cooperative effect of crown ether and chitosan polymer. The stability of this catalyst was also studied at the same time. This chiral natural crosslinked chitosan-palladium complex catalyst could be reused without appreciable change in optical catalytic activity, which will be useful for designing crosslinked-chitosan-based adsorption for metal ions for asymmetric hydrogenation.
文摘Alkylation of benzene with propylene was carried out with FeCl_(3)-chloro-butyl-pyridine(FeCl_(3)-[bpc])ionic liquid as catalyst to obtain cumene.Significant improvements in propylene conversion and cumene selectivity under mild reaction conditions were attained by modification of the catalyst with HCl.Under 20℃,0.1 MPa,reaction time 5 min,mole ratio of benzene to propylene 10:1 and mass ratio of FeCl_(3)-[bpc]to benzene 1:100,conversion of propylene can increase from 83.60%to 100.00%and selectivity of cumene can increase from 90.86%to 98.47%.If reaction is carried out in following two stages,the result will be very good.At the initial stage of the reaction,alkylation is the main reaction and a higher conversion of propylene is obtained at a lower tem-perature.At the later stage of the reaction,transalkylation is the main reaction and selectivity to cumene can be increased by appropriately raising the reaction temperature.
