Shear logs,also known as shear velocity logs,are used for various types of seismic analysis,such as determining the relationship between amplitude variation with offset(AVO)and interpreting multiple types of seismic d...Shear logs,also known as shear velocity logs,are used for various types of seismic analysis,such as determining the relationship between amplitude variation with offset(AVO)and interpreting multiple types of seismic data.This log is an important tool for analyzing the properties of rocks and interpreting seismic data to identify potential areas of oil and gas reserves.However,these logs are often not collected due to cost constraints or poor borehole conditions possibly leading to poor data quality,though there are various approaches in practice for estimating shear wave velocity.In this study,a detailed review of the recent advances in the various techniques used to measure shear wave(S-wave)velocity is carried out.These techniques include direct and indirect measurement,determination of empirical relationships between S-wave velocity and other parameters,machine learning,and rock physics models.Therefore,this study creates a collection of employed techniques,enhancing the existing knowledge of this significant topic and offering a progressive approach for practical implementation in the field.展开更多
Horizontal gas-liquid two-phase flows widely exist in chemical engineering,oil/gas production and other important industrial processes.Slug flow pattern is the main form of horizontal gas-liquid flows and characterize...Horizontal gas-liquid two-phase flows widely exist in chemical engineering,oil/gas production and other important industrial processes.Slug flow pattern is the main form of horizontal gas-liquid flows and characterized by intermittent motion of film region and slug region.This work aims to develop the ultrasonic Doppler method to realize the simultaneous measurement of the velocity profile and liquid film thickness of slug flow.A single-frequency single-channel transducer is adopted in the design of the field-programmable gate array based ultrasonic Doppler system.A multiple echo repetition technology is used to improve the temporal-spatial resolution for the velocity profile.An experiment of horizontal gas-liquid two-phase flow is implemented in an acrylic pipe with an inner diameter of 20 mm.Considering the aerated characteristics of the liquid slug,slug flow is divided into low-aerated slug flow,high-aerated slug flow and pseudo slug flow.The temporal-spatial velocity distributions of the three kinds of slug flows are reconstructed by using the ultrasonic velocity profile measurement.The evolution characteristics of the average velocity profile in slug flows are investigated.A novel method is proposed to derive the liquid film thickness based on the instantaneous velocity profile.The liquid film thickness can be effectively measured by detecting the position and the size of the bubbles nearly below the elongated gas bubble.Compared with the time of flight method,the film thickness measured by the Doppler system shows a higher accuracy as a bubble layer occurs in the film region.The effect of the gas distribution on the film thickness is uncovered in three kinds of slug flows.展开更多
Measuring the internal velocity of debris flows is very important for debris flow dynamics research and designing debris flow control works. However, there is no appropriate method for measuring the internal velocity ...Measuring the internal velocity of debris flows is very important for debris flow dynamics research and designing debris flow control works. However, there is no appropriate method for measuring the internal velocity because of the destructive power of debris flow process. In this paper, we address this problem by using the relationship between velocity and kinetic pressure, as described by surface velocity and surface kinetic pressure data. Kinetic pressure is the difference of impact pressure and static pressure. The former is detected by force sensors installed in the flow direction at the sampling section. Observations show that static pressure can be computed using the formula for static water pressure by simply substituting water density for debris flow density. We describe the relationship between surface velocity and surface kinetic pressure using data from seven laboratory flume experiments. It is consistent with the relationship for single phase flow, which is the measurement principle of the Pitot tube.展开更多
The principle and method of both radar target imaging and velocity measurement simultaneously based on step frequency waveforms is presented. Velocity compensation is necessary in order to obtain the good High resolut...The principle and method of both radar target imaging and velocity measurement simultaneously based on step frequency waveforms is presented. Velocity compensation is necessary in order to obtain the good High resolution range profile since this waveform is greatly sensitive to the Doppler shift. The velocity measurement performance of the four styles is analyzed with two pulse trains consisted of positive and negative step frequency waveforms. The velocity of targets can be estimated first coarsely by using the pulse trains with positive-positive step frequency combination, and then fine by positive-negative combination. Simulation results indicate that the method can accomplish the accurate estimation of the velocity with efficient computation and good anti-noise performance and obtain the good HRRP simultaneously.展开更多
The velocity of blown sand particles is an important parameter in aeolian movement (a special case of gas particle two-phase flow) and has ever been a topic of interest. At present, several techniques have been appl...The velocity of blown sand particles is an important parameter in aeolian movement (a special case of gas particle two-phase flow) and has ever been a topic of interest. At present, several techniques have been applied in measuring velocity of the blown sand particles. This paper reviews the measurement results of several commonly used methods: photoelectric cell method, high-speed photographic method, Particle Dynamics Analyzer (PDA) method and Particle Image Velocimetry (PIV) method. Photoelectric cell method, high-speed photograph method and PDA method are useful in studying the velocity distribution of particles. PIV is a whole-flow-field technique and a useful tool to study the average velocity field in a target area. These methods got some similar results but considerable differences also exist. They have come to similar conclusions on the velocity distributions at a single height but direct measurement results with respect to the velocity distribution very close to the surface are still scarce except some PDA results. The magnitude of measured mean particle velocity differs greatly. The relationship obtained by different methods between mean particle velocity and wind velocity, particle size and possibly other influencing factors also differs considerably. Although several authors have proposed similar power functions to describe the variation with height of the mean particle velocity, the predicted results have wide differences. Each technique is based on some unique principles, and has its advantages and disad- vantages. To make full use of different techniques, a lot of work needs be done to validate them. Developing a reliable technique to measure the velocity of blown particles is still a necessary task in aeolian research.展开更多
Light screen velocity measuring method with unique advantages has been widely used in the velocity measurement of various moving bodies.For large air resistance and friction force which the big moving bodies are subje...Light screen velocity measuring method with unique advantages has been widely used in the velocity measurement of various moving bodies.For large air resistance and friction force which the big moving bodies are subjected to during the light screen velocity measuring,the principle of velocity correction was proposed and a velocity correction equation was derived.A light screen velocity measuring method was used to measure the velocity of big moving bodies which have complex velocity attenuation,and the better results were gained in practical tests.The measuring uncertainty after the velocity correction was calculated.展开更多
For measuring velocity and impacting position of single fragment of warhead,a non-contact measuring method is proposed,in which a six-light-screen array,a position indicator,a multi-channel chronograph and a computer ...For measuring velocity and impacting position of single fragment of warhead,a non-contact measuring method is proposed,in which a six-light-screen array,a position indicator,a multi-channel chronograph and a computer are used.The principle of measurement is described.The key device of the system is a light screen array sensor which consists of six light screens allocated with certain geometrical parameters.When the fragment flies through the light screen array,the time of passing through each of the screens is recorded by the multi-channel chronograph.According to the time data and the geometrical parameters of the array,the velocity vector and the location of the fragment can be calculated immediately.The presented method can be used to locate the fragment and to measure the real velocity on its flying direction.It can also be used to measure the velocity of a fragment swarm after the system is engineered further.展开更多
In-situ stress measurement for deep reservoir formation is difficult in terms of security, reliability and technique. Acoustic velocity anisotropy test is a basic method for stress measurement of rock cores, which is ...In-situ stress measurement for deep reservoir formation is difficult in terms of security, reliability and technique. Acoustic velocity anisotropy test is a basic method for stress measurement of rock cores, which is based on the distribution of acoustic velocity in different directions around rock cores. The heterogeneity of core samples, such as fractures and gravel contained, can also lead to wave velocity anisotropy. Therefore, the corresponding reliability evaluation method is established to exclude some other anisotropy factors caused by non-tectonic stresses. In this paper, the reliability of testing results is evaluated from three aspects, i.e. phase difference, anisotropy index and waveform, to remove the factors caused by non-tectonic stresses.展开更多
To satisfy the demand of measuring the velocity of ground moving target through unmanned aerial vehicle(UAV)electro-optical platform,two velocity measurement methods are proposed.Firstly,a velocity measurement method ...To satisfy the demand of measuring the velocity of ground moving target through unmanned aerial vehicle(UAV)electro-optical platform,two velocity measurement methods are proposed.Firstly,a velocity measurement method based on target localization is derived,using the position difference between two points with the advantages of easy deployment and realization.Then a mathematical model for measuring target velocity is built and described by 15 variables,i.e.UAV velocity,UAV attitude angular rate,camera direction angular rate and so on.Moreover,the causes of velocity measurement error are analyzed and a formula is derived for calculating the measurement error.Finally,the simulation results show that angular rate error has a strong influence on the velocity measurement accuracy,especially the UAV pitch angular rate error,roll angular rate error and the camera angular altitude rate error,thus indicating the direction for improving velocity measurement precision.展开更多
In holes, the measurement of the velocity of detonation(VOD) helps in comparing and evaluating relative performance of explosives. In this paper a blast performance assessment was conducted based on the results obta...In holes, the measurement of the velocity of detonation(VOD) helps in comparing and evaluating relative performance of explosives. In this paper a blast performance assessment was conducted based on the results obtained from the steady state VOD measurement of emulsion explosives HEF100 and degree of blast fragmentation conducted on an open pit blast. The aim of this study was to compare the steady state VOD measured in the field and the published VOD of HEF100 under ideal laboratory conditions and ascertain its efficacy. In the trial, a resistance wire continuous VOD measurement system connected to a SpeedVOD was employed to measure and record the steady state VOD values from five different blast holes. Furthermore, a post fragmentation analysis was conducted using the existing fragmentation models and an image processing software. The steady state VOD values recorded from the field ranged between 4981 m/s to 5387 m/s consistent with the published VOD subjected to ideal laboratory conditions and the analyzed fragmentation size distribution indicates that 90% of the blasted muck pile was within the allowable and optimal 700 mm passing size.展开更多
In-situ layerwise imaging measurement of laser powder bed fusion(LPBF)provides a wealth of forming and defect data which enables monitoring of components quality and powder bed homogeneity.Using high-resolution camera...In-situ layerwise imaging measurement of laser powder bed fusion(LPBF)provides a wealth of forming and defect data which enables monitoring of components quality and powder bed homogeneity.Using high-resolution camera layerwise imaging and image processing algorithms to monitor fusion area and powder bed geometric defects has been studied by many researchers,which successfully monitored the contours of components and evaluated their accuracy.However,research for the methods of in-situ 3D contour measurement or component edge warping identification is rare.In this study,a 3D contour mea-surement method combining gray intensity and phase difference is proposed,and its accuracy is verified by designed experiments.The results show that the high-precision of the 3D contours can be achieved by the constructed energy minimization function.This method can detect the deviations of common ge-ometric features as well as warpage at LPBF component edges,and provides fundamental data for in-situ quality monitoring tools.展开更多
In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or ...In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.展开更多
The Particle Velocity Sensor (PVS) is a kind of acoustic transducer which measures the particle velocity directly with figure-of-eight directivity. This paper proposes a near-field noise scanning technology based on t...The Particle Velocity Sensor (PVS) is a kind of acoustic transducer which measures the particle velocity directly with figure-of-eight directivity. This paper proposes a near-field noise scanning technology based on the research of PVS, pressure-particle velocity (P-U) probe, and its application in noise source identification. Firstly, the principle and characteristics of PVS are presented. Secondly, a P-U probe is designed on the basis of PVS development. Finally, the noise measurement experiment for a single source is arranged and conducted. The result shows that the proposed P-U probe performs well in near-field noise source identification and localization.展开更多
Interferometric Rayleigh scattering diagnostic technique for the time-resolved measurement of flow velocity is studied. Theoretically, this systematic velocity-measured accuracy can reach up to 1.23 m/s. Measurement a...Interferometric Rayleigh scattering diagnostic technique for the time-resolved measurement of flow velocity is studied. Theoretically, this systematic velocity-measured accuracy can reach up to 1.23 m/s. Measurement accuracy is then evaluated by comparing with hot wire anemometry results. Moreover, the distributions of velocity and turbulence intensity in a supersonic free jet from a Laval nozzle with a Mach number of 1.8 are also obtained quantitatively. The sampling rate in this measurement is determined to be approximately 10 k Hz.展开更多
In this study,the micro-failure process and failure mechanism of a typical brittle rock under uniaxial compression are investigated via continuous real-time measurement of wave velocities.The experimental results indi...In this study,the micro-failure process and failure mechanism of a typical brittle rock under uniaxial compression are investigated via continuous real-time measurement of wave velocities.The experimental results indicate that the evolutions of wave velocities became progressively anisotropic under uniaxial loading due to the direction-dependent development of micro-damage.A wave velocity model considering the inner anisotropic crack evolution is proposed to accurately describe the variations of wave velocities during uniaxial compression testing.Based on which,the effective elastic parameters are inferred by a transverse isotropic constitutive model,and the evolutions of the crack density are inversed using a self-consistent damage model.It is found that the propagation of axial cracks dominates the failure process of brittle rock under uniaxial loading and oblique shear cracks develop with the appearance of macrocrack.展开更多
In order to solve the in-situ measurement problem of workpiece with complex structures,a cantilever coordinate measuring machine(CCMM)is proposed to adapt to the finite space constraints of the 5-axis computer numeric...In order to solve the in-situ measurement problem of workpiece with complex structures,a cantilever coordinate measuring machine(CCMM)is proposed to adapt to the finite space constraints of the 5-axis computer numerical control(CNC)processing site.Structure design of dense ball bearing shafting is analyzed and optimized.Factors affecting measurement accuracy of CCMM are analyzed,and measurement accuracy is validated by experiments.Results show that the structure of CCMM is able to satisfy requirements of technical specification,and the in-situ measurement of blisk manufacturing is realized.The CCMM developed is of important significance for machining quantity improvement of blisk and development of large aircraft production.展开更多
As one of the interesting optical techniques for measurements of the velocity,the spatial filtering method is treated briefly in this paper.We shown theoretical analysis and calculation of spatial filtering velocimetr...As one of the interesting optical techniques for measurements of the velocity,the spatial filtering method is treated briefly in this paper.We shown theoretical analysis and calculation of spatial filtering velocimetry,and discussed two-dimensional measurements of the velocity.About the data processing,we used A/D conversion and interfaced with a microcomputer,so that the data can be processed automatically by the microcomputer.The preliminary experiment was performed and the experimental results show the usefulness of the present method for measurements of the velocity.展开更多
A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 ...A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 m/s to 2500 m/s) can be measured in the HL-1M tokamak fueling experiments. By analyzing photographs and the conditions of frozen pellets (including gas supply, gas replenishment, temperature controlling etc), the pellet-freezing technology is summarized in the paper.展开更多
The plasma rotation velocity were measured in HL-1M with Doppler shifts of CⅢ、 C Ⅱ、 O Ⅱ and H. line by a SKD high resolution spectrometer. The effects .of density' hydrogen pellet injection and carbon impuri...The plasma rotation velocity were measured in HL-1M with Doppler shifts of CⅢ、 C Ⅱ、 O Ⅱ and H. line by a SKD high resolution spectrometer. The effects .of density' hydrogen pellet injection and carbon impurities injected by laser-blow-off on toroidal(V) and poloidal (Vθ)rotation velocity have been observed. The Vθ measured from H. line is only half of that from C Ⅱ impurity line.展开更多
Target vdocity and acceleration are two of the most important features for identification of warheads and decoys in ballistic missile defense phased array radar systems. Velocity compensation is also the necessary ste...Target vdocity and acceleration are two of the most important features for identification of warheads and decoys in ballistic missile defense phased array radar systems. Velocity compensation is also the necessary step for one-dimensional range profile imaging. According to the high-vdocity characteristics of ballistic objects and the low data rate of phased array radars with multiple target tracking, a fine spectral line digital velocity tracking frame is presented and a new method is developed to extract velocity error and resolve the velocity ambiguity in the measurement loop. Simulation results demonstrate the effectiveness of the proposed technique.展开更多
文摘Shear logs,also known as shear velocity logs,are used for various types of seismic analysis,such as determining the relationship between amplitude variation with offset(AVO)and interpreting multiple types of seismic data.This log is an important tool for analyzing the properties of rocks and interpreting seismic data to identify potential areas of oil and gas reserves.However,these logs are often not collected due to cost constraints or poor borehole conditions possibly leading to poor data quality,though there are various approaches in practice for estimating shear wave velocity.In this study,a detailed review of the recent advances in the various techniques used to measure shear wave(S-wave)velocity is carried out.These techniques include direct and indirect measurement,determination of empirical relationships between S-wave velocity and other parameters,machine learning,and rock physics models.Therefore,this study creates a collection of employed techniques,enhancing the existing knowledge of this significant topic and offering a progressive approach for practical implementation in the field.
基金supported by the National Natural Science Foundation of China(41974139,42274148,42074142)。
文摘Horizontal gas-liquid two-phase flows widely exist in chemical engineering,oil/gas production and other important industrial processes.Slug flow pattern is the main form of horizontal gas-liquid flows and characterized by intermittent motion of film region and slug region.This work aims to develop the ultrasonic Doppler method to realize the simultaneous measurement of the velocity profile and liquid film thickness of slug flow.A single-frequency single-channel transducer is adopted in the design of the field-programmable gate array based ultrasonic Doppler system.A multiple echo repetition technology is used to improve the temporal-spatial resolution for the velocity profile.An experiment of horizontal gas-liquid two-phase flow is implemented in an acrylic pipe with an inner diameter of 20 mm.Considering the aerated characteristics of the liquid slug,slug flow is divided into low-aerated slug flow,high-aerated slug flow and pseudo slug flow.The temporal-spatial velocity distributions of the three kinds of slug flows are reconstructed by using the ultrasonic velocity profile measurement.The evolution characteristics of the average velocity profile in slug flows are investigated.A novel method is proposed to derive the liquid film thickness based on the instantaneous velocity profile.The liquid film thickness can be effectively measured by detecting the position and the size of the bubbles nearly below the elongated gas bubble.Compared with the time of flight method,the film thickness measured by the Doppler system shows a higher accuracy as a bubble layer occurs in the film region.The effect of the gas distribution on the film thickness is uncovered in three kinds of slug flows.
基金supported by the National Natural Science Foundation of China (Grant No. 40771026)the NSFC-RFBR project (Grant No. 40911120089, 08-05-92206 NSFCa)
文摘Measuring the internal velocity of debris flows is very important for debris flow dynamics research and designing debris flow control works. However, there is no appropriate method for measuring the internal velocity because of the destructive power of debris flow process. In this paper, we address this problem by using the relationship between velocity and kinetic pressure, as described by surface velocity and surface kinetic pressure data. Kinetic pressure is the difference of impact pressure and static pressure. The former is detected by force sensors installed in the flow direction at the sampling section. Observations show that static pressure can be computed using the formula for static water pressure by simply substituting water density for debris flow density. We describe the relationship between surface velocity and surface kinetic pressure using data from seven laboratory flume experiments. It is consistent with the relationship for single phase flow, which is the measurement principle of the Pitot tube.
文摘The principle and method of both radar target imaging and velocity measurement simultaneously based on step frequency waveforms is presented. Velocity compensation is necessary in order to obtain the good High resolution range profile since this waveform is greatly sensitive to the Doppler shift. The velocity measurement performance of the four styles is analyzed with two pulse trains consisted of positive and negative step frequency waveforms. The velocity of targets can be estimated first coarsely by using the pulse trains with positive-positive step frequency combination, and then fine by positive-negative combination. Simulation results indicate that the method can accomplish the accurate estimation of the velocity with efficient computation and good anti-noise performance and obtain the good HRRP simultaneously.
基金the funding from National Science Fund for Distinguished Young Scholars of the NaturalScience Foundation of China (40225003)the Knowledge Innovation Project of the Chinese Academy of Science(KZCX3-SW-341)
文摘The velocity of blown sand particles is an important parameter in aeolian movement (a special case of gas particle two-phase flow) and has ever been a topic of interest. At present, several techniques have been applied in measuring velocity of the blown sand particles. This paper reviews the measurement results of several commonly used methods: photoelectric cell method, high-speed photographic method, Particle Dynamics Analyzer (PDA) method and Particle Image Velocimetry (PIV) method. Photoelectric cell method, high-speed photograph method and PDA method are useful in studying the velocity distribution of particles. PIV is a whole-flow-field technique and a useful tool to study the average velocity field in a target area. These methods got some similar results but considerable differences also exist. They have come to similar conclusions on the velocity distributions at a single height but direct measurement results with respect to the velocity distribution very close to the surface are still scarce except some PDA results. The magnitude of measured mean particle velocity differs greatly. The relationship obtained by different methods between mean particle velocity and wind velocity, particle size and possibly other influencing factors also differs considerably. Although several authors have proposed similar power functions to describe the variation with height of the mean particle velocity, the predicted results have wide differences. Each technique is based on some unique principles, and has its advantages and disad- vantages. To make full use of different techniques, a lot of work needs be done to validate them. Developing a reliable technique to measure the velocity of blown particles is still a necessary task in aeolian research.
文摘Light screen velocity measuring method with unique advantages has been widely used in the velocity measurement of various moving bodies.For large air resistance and friction force which the big moving bodies are subjected to during the light screen velocity measuring,the principle of velocity correction was proposed and a velocity correction equation was derived.A light screen velocity measuring method was used to measure the velocity of big moving bodies which have complex velocity attenuation,and the better results were gained in practical tests.The measuring uncertainty after the velocity correction was calculated.
基金Sponsored by Foundation of Department Education of Shaanxi Province of China(03JC31)Key Lab Foundationin Nanjing University of Science and Technology(51453010103SX0201).
文摘For measuring velocity and impacting position of single fragment of warhead,a non-contact measuring method is proposed,in which a six-light-screen array,a position indicator,a multi-channel chronograph and a computer are used.The principle of measurement is described.The key device of the system is a light screen array sensor which consists of six light screens allocated with certain geometrical parameters.When the fragment flies through the light screen array,the time of passing through each of the screens is recorded by the multi-channel chronograph.According to the time data and the geometrical parameters of the array,the velocity vector and the location of the fragment can be calculated immediately.The presented method can be used to locate the fragment and to measure the real velocity on its flying direction.It can also be used to measure the velocity of a fragment swarm after the system is engineered further.
基金Supported by the PetroChina Company Limited (112002Kt0090001)
文摘In-situ stress measurement for deep reservoir formation is difficult in terms of security, reliability and technique. Acoustic velocity anisotropy test is a basic method for stress measurement of rock cores, which is based on the distribution of acoustic velocity in different directions around rock cores. The heterogeneity of core samples, such as fractures and gravel contained, can also lead to wave velocity anisotropy. Therefore, the corresponding reliability evaluation method is established to exclude some other anisotropy factors caused by non-tectonic stresses. In this paper, the reliability of testing results is evaluated from three aspects, i.e. phase difference, anisotropy index and waveform, to remove the factors caused by non-tectonic stresses.
基金supported by the Aeronautical Science Foundation of China(No.61106018)
文摘To satisfy the demand of measuring the velocity of ground moving target through unmanned aerial vehicle(UAV)electro-optical platform,two velocity measurement methods are proposed.Firstly,a velocity measurement method based on target localization is derived,using the position difference between two points with the advantages of easy deployment and realization.Then a mathematical model for measuring target velocity is built and described by 15 variables,i.e.UAV velocity,UAV attitude angular rate,camera direction angular rate and so on.Moreover,the causes of velocity measurement error are analyzed and a formula is derived for calculating the measurement error.Finally,the simulation results show that angular rate error has a strong influence on the velocity measurement accuracy,especially the UAV pitch angular rate error,roll angular rate error and the camera angular altitude rate error,thus indicating the direction for improving velocity measurement precision.
文摘In holes, the measurement of the velocity of detonation(VOD) helps in comparing and evaluating relative performance of explosives. In this paper a blast performance assessment was conducted based on the results obtained from the steady state VOD measurement of emulsion explosives HEF100 and degree of blast fragmentation conducted on an open pit blast. The aim of this study was to compare the steady state VOD measured in the field and the published VOD of HEF100 under ideal laboratory conditions and ascertain its efficacy. In the trial, a resistance wire continuous VOD measurement system connected to a SpeedVOD was employed to measure and record the steady state VOD values from five different blast holes. Furthermore, a post fragmentation analysis was conducted using the existing fragmentation models and an image processing software. The steady state VOD values recorded from the field ranged between 4981 m/s to 5387 m/s consistent with the published VOD subjected to ideal laboratory conditions and the analyzed fragmentation size distribution indicates that 90% of the blasted muck pile was within the allowable and optimal 700 mm passing size.
基金This work was supported by the foundation of Key Research and Development Program of Hubei Province(2020BAB137)Shen-zhen Fundamental Research Program(JCYJ20210324142007022).
文摘In-situ layerwise imaging measurement of laser powder bed fusion(LPBF)provides a wealth of forming and defect data which enables monitoring of components quality and powder bed homogeneity.Using high-resolution camera layerwise imaging and image processing algorithms to monitor fusion area and powder bed geometric defects has been studied by many researchers,which successfully monitored the contours of components and evaluated their accuracy.However,research for the methods of in-situ 3D contour measurement or component edge warping identification is rare.In this study,a 3D contour mea-surement method combining gray intensity and phase difference is proposed,and its accuracy is verified by designed experiments.The results show that the high-precision of the 3D contours can be achieved by the constructed energy minimization function.This method can detect the deviations of common ge-ometric features as well as warpage at LPBF component edges,and provides fundamental data for in-situ quality monitoring tools.
基金National Natural Science Foundation of China(Nos.61871353,62031005)。
文摘In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.
文摘The Particle Velocity Sensor (PVS) is a kind of acoustic transducer which measures the particle velocity directly with figure-of-eight directivity. This paper proposes a near-field noise scanning technology based on the research of PVS, pressure-particle velocity (P-U) probe, and its application in noise source identification. Firstly, the principle and characteristics of PVS are presented. Secondly, a P-U probe is designed on the basis of PVS development. Finally, the noise measurement experiment for a single source is arranged and conducted. The result shows that the proposed P-U probe performs well in near-field noise source identification and localization.
基金Project supported by the National Natural Science Foundation of China(Grant No.11272337)
文摘Interferometric Rayleigh scattering diagnostic technique for the time-resolved measurement of flow velocity is studied. Theoretically, this systematic velocity-measured accuracy can reach up to 1.23 m/s. Measurement accuracy is then evaluated by comparing with hot wire anemometry results. Moreover, the distributions of velocity and turbulence intensity in a supersonic free jet from a Laval nozzle with a Mach number of 1.8 are also obtained quantitatively. The sampling rate in this measurement is determined to be approximately 10 k Hz.
基金Projects(41502283,41772309)supported by the National Natural Science Foundation of ChinaProject(2017YFC1501302)supported by the National Key Research and Development Program of ChinaProject(2017ACA102)supported by the Major Program of Technological Innovation of Hubei Province,China。
文摘In this study,the micro-failure process and failure mechanism of a typical brittle rock under uniaxial compression are investigated via continuous real-time measurement of wave velocities.The experimental results indicate that the evolutions of wave velocities became progressively anisotropic under uniaxial loading due to the direction-dependent development of micro-damage.A wave velocity model considering the inner anisotropic crack evolution is proposed to accurately describe the variations of wave velocities during uniaxial compression testing.Based on which,the effective elastic parameters are inferred by a transverse isotropic constitutive model,and the evolutions of the crack density are inversed using a self-consistent damage model.It is found that the propagation of axial cracks dominates the failure process of brittle rock under uniaxial loading and oblique shear cracks develop with the appearance of macrocrack.
基金National Natural Science Foundation of China(No.51375338)
文摘In order to solve the in-situ measurement problem of workpiece with complex structures,a cantilever coordinate measuring machine(CCMM)is proposed to adapt to the finite space constraints of the 5-axis computer numerical control(CNC)processing site.Structure design of dense ball bearing shafting is analyzed and optimized.Factors affecting measurement accuracy of CCMM are analyzed,and measurement accuracy is validated by experiments.Results show that the structure of CCMM is able to satisfy requirements of technical specification,and the in-situ measurement of blisk manufacturing is realized.The CCMM developed is of important significance for machining quantity improvement of blisk and development of large aircraft production.
文摘As one of the interesting optical techniques for measurements of the velocity,the spatial filtering method is treated briefly in this paper.We shown theoretical analysis and calculation of spatial filtering velocimetry,and discussed two-dimensional measurements of the velocity.About the data processing,we used A/D conversion and interfaced with a microcomputer,so that the data can be processed automatically by the microcomputer.The preliminary experiment was performed and the experimental results show the usefulness of the present method for measurements of the velocity.
文摘A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 m/s to 2500 m/s) can be measured in the HL-1M tokamak fueling experiments. By analyzing photographs and the conditions of frozen pellets (including gas supply, gas replenishment, temperature controlling etc), the pellet-freezing technology is summarized in the paper.
文摘The plasma rotation velocity were measured in HL-1M with Doppler shifts of CⅢ、 C Ⅱ、 O Ⅱ and H. line by a SKD high resolution spectrometer. The effects .of density' hydrogen pellet injection and carbon impurities injected by laser-blow-off on toroidal(V) and poloidal (Vθ)rotation velocity have been observed. The Vθ measured from H. line is only half of that from C Ⅱ impurity line.
文摘Target vdocity and acceleration are two of the most important features for identification of warheads and decoys in ballistic missile defense phased array radar systems. Velocity compensation is also the necessary step for one-dimensional range profile imaging. According to the high-vdocity characteristics of ballistic objects and the low data rate of phased array radars with multiple target tracking, a fine spectral line digital velocity tracking frame is presented and a new method is developed to extract velocity error and resolve the velocity ambiguity in the measurement loop. Simulation results demonstrate the effectiveness of the proposed technique.