Determination of urinary 8-hydroxy-2′-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction

Urinary 8-hydroxy-2 -deoxyguanosine(8-OHdG) is an excellent marker of oxidative DNA damage.In this study,employing guanosine as dummy template a novel molecularly imprinted(MIP) monolithic capillary column had been synthesized,and that was used as medium of in-tube solid phase microextraction(SPME).Coupled with capillary electrophoresis-electrochemical detection(CE-ECD),the system of extraction and detection of 8-OHdG in urinary sample had been developed.Because of its greater phase ratio combined with conv...

Analysis of α, β, γ-hexachlorocyclohexanes in water by novel activated carbon fiber-solid phase microextraction coupled with gas chromatography—mass spectrometry

A fast and simple method for determination of α, β, γ-hexachlorocyclohexanes (HCHs) in water using activated carbon fiber-solid phase microextraction(ACF-SPME) were studied. Results showed the performance of adsorption and desorption of three HCHs on ACF were excellent. A wide linear range from 10 to 100 μg/L and detection limits of the ng/L level were obtained using ACF-SPME with GC-MS in selected ion monitoring(SIM) acquisition mode. The proposed method was also successfully applied for determination of three HCHs in tap water. Compared to commercial fibers, ACF showed some advantages such as better resistance to solvents, higher thermal stability, longer lifetime and lower cost. The data demonstrated that GC-MS with ACF-SPME is well suitable for the analysis of HCHs in water.

Determination of Aromatic Components of Rosa davurica Pall. by Headspace Solid Phase Microextraction Combined with GC-MS

[Objectives] To determine the aromatic components of Rosa davurica Pall. [Methods] 42 kinds of aromatic components were identified from the flowers of R. davurica by headspace solid phase microextraction( HS-SPME) combined with gas chromatography-mass spectrometry( GC-MS). The main compounds were alcohols( 54. 88%) and aldehydes( 19. 55%). [Results] The top five components with the highest relative content were phenylethyl alcohol( 12. 69%),geraniol( 9. 85%),citronellol( 8. 80%),nerol( 7. 84%) and 2-n-pentylfuran( 7. 45%). [Conclusions] Headspace solid phase microextraction( HS-SPME) combined with gas chromatography-mass spectrometry( GC-MS) can provide basis for further development and utilization of R. davurica.

Solid phase microextraction chemical biopsy tool for monitoring of doxorubicin residue during in vivo lung chemo-perfusion

Development of a novel in vivo lung perfusion(IVLP)procedure allows localized delivery of high-dose doxorubicin(DOX)for targeting residual micrometastatic disease in the lungs.However,DOX delivery via IVLP requires careful monitoring of drug level to ensure tissue concentrations of this agent remain in the therapeutic window.A small dimension nitinol wire coated with a sorbent of biocompatible morphology(Bio-SPME)has been clinically evaluated for in vivo lung tissue extraction and determination of DOX and its key metabolites.The in vivo Bio-SPME-IVLP experiments were performed on pig model over various(150 and 225 mg/m^(2))drug doses,and during human clinical trial.Two patients with metastatic osteosarcoma were treated with a single 5 and 7 μg/mL(respectively)dose of DOX during a 3-h IVLP.In both pig and human cases,DOX tissue levels presented similar trends during IVLP.Human lung tissue concentrations of drug ranged between 15 and 293 μg/g over the course of the IVLP procedure.In addition to DOX levels,Bio-SPME followed by liquid chromatography-mass spectrometry analysis generated 64 metabolic features during endogenous metabolite screening,providing information about lung status during drug administration.Real-time monitoring of DOX levels in the lungs can be performed effectively throughout the IVLP procedure by in vivo Bio-SPME chemical biopsy approach.Bio-SPME also extracted various endogenous molecules,thus providing a real-time snapshot of the physiology of the cells,which might assist in the tailoring of personalized treatment strategy.

Comparison of Headspace Solid-Phase Microextraction with Simultaneous Steam Distillation Extraction for the Analysis of the Volatile Constituents in Chinese Apricot

Volatile constituents in fully mature fruits of apricot （Prunus armeniaca L.） cultivar Xinshiji were extracted using headspace solid-phase microextraction （HS-SPME） and simultaneous steam distillation extraction （SSDE） and then analyzed using capillary gas chromatography and gas chromatography-mass spectrometry. A total of 70 components were identified by HSSPME, including 20 esters, 19 hydrocarbons, 5 alcohols, 5 ketones, 4 acids, 4 lactones, 3 aldehydes, and 10 miscellaneous components, with the esters being the dominant constituent. On the basis of the odor unit values, it is believed that the following compounds probably contributed to the fresh apricot odor： hexyl acetate, β-ionone, butyl acetate, （E）-2-hexenal, linalool, limonene, γ-decalactone, and hexanal. A total of 49 components were also detected by SSDE, including 13 hydrocarbons, 9 alcohols, 7 aldehydes, 9 esters, 4 ketones, 4 lactones, 2 acids, and 1 miscellaneous component, of which the monoterpene alcohols were the dominant constituents. It could be judged from the odor unit values that the following compounds were the major contributors to boiled apricot aroma： β-ionone, linalool, hexyl acetate, γ-dodecalactone, γ- decalactone, （E）-2-hexenal, hexanal, γ-octalactone, phenylacetaldehyde, butyl acetate, limonene, α-terpineol, and δ-decalactone. The results show that HS-SPME is a simple, rapid, and solvent-free method, which is an alternative to the classical SSDE.

A novel fiber coating for solid phase microextraction and its application for the extraction of n-alkane from aqueous sample

Base on the previous work in laboratory, a novel polyaniline doped with polydimethylsiloxane coating was developed on a stainless steel wire for solid phase microextraction（SPME） by electroplating method. This electroplating method not only has advantages of ease preparation and simple equipments required, but also increases the lifetime of the SPME fiber. The composite fiber（polyaniline/ polydimethylsiloxane（PANI/PDMS）） was evaluated by analyzing n-tridecane, n-tetradecane and n-pentadecane in aqueous sample. The new fiber coating showed comprehensive abilities to extract alkanes compounds. The relative standard deviations were found to be 6.8%-10.33%.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nano-composite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was inves-tigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extrac-tion temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

Integration of GC-MS Based Non-Targeted Metabolic Profiling with Headspace Solid Phase Microextraction Enhances the Understanding of Volatile Differentiation in Tobacco Leaves from North Carolina, India and Brazil

In this report, gas chromatography-mass spectrometry (GC-MS) based non-targeted metabolomics is used to develop appropriate headspace solid phase microextractions (HS-SPME) to enhance the understanding of volatile complexity of flue-cured tobacco leaves. Non-targeted metabolic profiling of GC-MS shows that the extraction condition of HS-SPME at 100?C for 30 min provides a better metabolite profile than other extraction conditions tested. GC-MS and principal component analyses (PCA) show that among five types of fibers tested, 100 μm polydimethylsiloxane (PMDS), 65 μm polydimethylsiloxane/divinylbenzene (PMDS/DVB) and 75 μm carboxen/polydimethylsiloxane (CAR/ PMS) provide a better reproducible metabolite profile. Based on an appropriate PDMS extraction condition optimized, we use GC-MS analysis and PCA to compare metabolite profiles in flue-cured leaves of tobacco plants grown in North Carolina, India and Brazil, respectively. The resulting data of PCA show that the global metabolic profiles in North Carolina samples are separated from those in Brazil and India samples, two groups of which are characterized by a partially overlapped pattern. Several peaks that were differentially accumulated in samples were annotated to known metabolites by deconvolution analysis, such as norsolanadione, solavetivone and rishtin. Norsolanadione is detected only in Brazil samples. Solavetivone is detected in samples of India and Brazil but not in those of North Carolina. Rishtin is detected in samples of North Carolina and India but not in Brazil samples. These data indicate that not only can a non-targeted metabolic profiling approach enhance the understanding of volatile complexity, but also can identify marker volatile metabolites in tobacco leaves produced in different growth regions.

Solid phase microextraction(SPME) sampling under turbulent conditions and for the simultaneous collecting of tracer gases

Solid phase microextraction(SPME) is a solvent-free method of sample collection. SPME is an appealing method for sample collection because it is designed for the sampling of trace level analytes with short sampling times in a variety of environments. Additionally, SPME can be used to directly deliver a sample to a gas chromatograph(GC) for analysis by means of thermal desorption. In this paper, the performance of SPME under dynamic conditions was investigated. Additionally, the competence of SPME sampling for the simultaneous analysis of multiple trace analytes was also evaluated. This work is discussed in the context of underground mine ventilation surveys but is applicable to any industry in which ventilation circuits must be evaluated. The results of this paper showed that the performance of the 100 lm PDMS SPME fiber was both precise and rapid under dynamic conditions. This SPME fiber was also able to simultaneously collect sulfur hexafluoride(SF6) and perfluoromethylcyclohexane(PMCH) with adequate sensitivity.

Sol-Gel-Coated Calix[4]arene Fiber for Solid-Phase Microextraction

5, 11, 17, 23-tetra-tert-butyl-25, 27-diethoxy-26, 28-dihydroxycalix \ arene /hydroxy-terminated silicone oil coated fiber was first prepared and applied for solid-phase microextraction with sol-gel technology. The properties of the new coating were investigated by analysis of benzene derivatives, polycyclic aromatic hydrocarbons and aromatic amines. The fiber is characterized by good sensitivity and selectivity to these aromatics. The fiber has stable performance at a high temperature of 380℃ and after a long solvent immersing, thus its lifetime is very long. It shows good fiber-to-fiber and batch-to-batch reproducibility. Furthermore, broad linear ranges and low detection limits are also its characteristics.

Solid-phase Microextraction with Benzoxy-calix[6]arene Fiber Coupled to Gas Chromatography for the Analysis of Polycyclic Aromatic Hydrocarbons in Water

Headspace solid-phase microextraction（HS-SPME） with sol-gel calix[6]arene-containing fiber followed by gas chromatography with a flame ionization detector was used to examine the composition and distribution of seven polycyclic aromatic hydrocarbons（PAHs） in water. The novel SPME fiber exhibited higher extraction efficiency to PAHs compared with poly（dimethylsiloxane） and other calixarene-containing fibers. Extraction/retention mechanism based on the interactions between calixarenes and PAHs was discussed. Owing to the good selectivity and high extraction capability of this calixarene fiber, low detection limits were obtained in a range of 0.34―6.50 ng/L and the relative standard deviation values were ≤12.3% for all of the analytes. The linear ranges of the proposed method were five orders of magnitude for the tested compounds, with linear correlation coefficients（r） greater than 0.998. The method was applied to the determination of polycyclic aromatic hydrocarbons in nine water sources in Wuhan City, China. Standard addition method was selected for the quantification and the recovery values were in a satisfactory range. Total PAHs concentrations in the nine surface water samples were found to vary between undetectable and 8.840 μg/L with two- and three-ring PAHs predominating.

Preparation of A New Fiber by Sol-gel Technology in Solid-phase Microextraction (SPME)

The sol-gel technology is applied for the preparation of solid-phase microextraction (SPME) fiber. The fiber demonstrates high thermal stability, efficient extraction rate and the selectivity for non-polar or low-polar analytes. Efficient SPME-GC-FID analyses of benzene- toluene-ethylbenzene-xylenes (BTEXs) and low-polar halocarbon were achieved by the sol-gel coated DSDA-DDBT-TiO2 fiber. Some parameters of the SPME fiber for the determination of halocarbon in aqueous sample were investigated.

Solid-phase microextraction for flavor analysis in Harari Khat （Catha edulis） stimulant

This research examined the typical flavor compounds in the commonest type of Khat called Harari Khat grown in the region of Ethiopia.Twenty-eight compounds, which includes 1,2-Propanedione,1-Phenyl,Hexanol,Hexanal compounds,Limonene, Benzaldehyde with other flavors, were extracted by polydimethylsiloxane at room temperature for 30min from Khat samples,and identified by solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS).This method needs no organic solvents and required minimal sample.

不同产地沃柑挥发性成分的差异分析

该研究旨在分析4个主产地(四川、重庆、云南和广西)的沃柑果皮中挥发性成分的差异性,并为沃柑的产地溯源和深加工提供数据支撑。利用顶空固相微萃取-气相色谱-质谱联用技术测定了沃柑果皮挥发性成分,共鉴定出50种挥发性成分,其中萜烯类18种、醇类11种、醛类10种、酯类8种、酮类1种、其他类2种。柠檬烯是主要的挥发性物质,月桂烯、α-蒎烯、芳樟醇、正辛醇、正辛醛、香茅醇、己醛、反式-2-己烯醛、桧烯、香芹酮和α-松油醇等次之。基于挥发性成分半定量结果,建立四川和重庆,云南和广西沃柑的正交偏最小二乘法判别分析模型,进而筛选出潜在生物标志物。结果表明,柠檬烯、芳樟醇和香茅醇可作为区分重庆和四川的潜在生物标志物,醋酸辛酯和α-松油醇可作为区分广西和云南的潜在生物标志物。

共价有机框架衍生多孔碳固相微萃取纤维结合气相色谱法测定水样中的邻苯二甲酸酯

以4-甲酰基苯硼酸(FPBA)和2,4,6-三(4-氨基苯基)-1,3,5-三嗪(TAPT)为单体,通过溶剂热法制备了共价有机框架(COF)FPBA-TAPT,将其直接热解后获得衍生多孔碳材料(PC)FTPC.傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、拉曼光谱及扫描电子显微镜(SEM)表征结果显示,该材料呈球形,表面呈褶皱结构,比表面积为499 m2/g.利用溶胶-凝胶法将其涂覆在不锈钢丝表面制得固相微萃取纤维,结合气相色谱法建立了测定水样中邻苯二甲酸酯(PAEs)的方法.对萃取和解吸条件进行优化后,该方法具有较宽的线性范围(0.5~100μg/L)、较低的检测限(0.018~0.106μg/L)和良好的稳定性(相对标准偏差,RSD≤7.8%).将该方法用于3种水样中PAEs的检测,低(5μg/L)、中(10μg/L)及高(50μg/L)加标回收率为79.5%~123.9%,RSD为1.1%~12.2%,表明该方法具有良好的准确性,可实现水体中PAEs的有效定量分析.

不同萃取方法下绿萼梅花蕾挥发性成分的差异研究

2023年3月13日,从浙江省长兴县东方梅园有限公司梅花基地采集绿萼梅花蕾,采用顶空-固相微萃取、水蒸气蒸馏、超临界二氧化碳3种萃取方法,结合气相色谱-质谱联用仪(GC-MS)分析绿萼梅Prunus mume f.viridicalyx花蕾中的挥发性成分,以明确其花蕾中挥发性成分组成、含量及不同萃取方式对挥发性成分萃取效果的影响。结果表明,三种萃取方法获得的绿萼梅花提取物中共鉴定出醛、醇、酮、烯等9类57种化合物,主要挥发性成分是苯甲醛、壬醛、金合欢醇、苯甲酸、α-香树脂醇、D-柠檬烯,其中苯甲醛含量最高。绿萼梅花顶空-固相微萃取物中共鉴定出21种化合物,以醛、醇和酯类化合物为主;水蒸气蒸馏物中共鉴定出30种化合物,以酯、烯、酮等水难溶化合物为主;而超临界二氧化碳提取物中共鉴定出30种化合物,以长链烷、酯类化合物为主。三种提取方法中超临界二氧化碳萃取物中蜡质含量较高,顶空-固相微萃取和水蒸气蒸馏法结合更适合作为植物芳香类挥发物的检测手段。

顶空箭形固相微萃取–气相色谱质谱法分析烃源岩和稠油中的金刚烷类化合物

采用顶空箭型固相微萃取–气相色谱质谱联用技术(HS-SPME Arrow-GC/MS)直接检测分析烃源岩粉末样品和稠油中的单金刚烷类和双金刚烷类化合物,考察并优化了影响萃取效率的萃取纤维头类型、萃取温度、萃取时间和解析时间等关键因素。对于小于80目的烃源岩样品,推荐最优HS-SPME Arrow实验条件为:使用250μm PDMS箭形固相微萃取头, 120℃下萃取20 min, 260℃下解析8 min。对于稠油,当使用250μm PDMS萃取纤维头、萃取温度为120~150℃、萃取时间为15~20 min、解析时间为3~8 min时,稠油中的单金刚烷类和双金刚烷类化合物都能取得较理想的质谱响应。该方法实现了对烃源岩粉末和稠油中金刚烷类化合物的直接分析,灵敏度高,检出限低(0.004~0.977 ng/g),重现性好,测量峰面积和比值参数的相对标准偏差分别小于20%和5%,避免了复杂的前处理过程,是一种快捷可靠的分析方法。