Influence of heat treatments on incipient melting structures of DD5 nickel-based single crystal superalloy

The evolution of microstructure and formation mechanism of incipient melting microstructure of DD5 single crystal superalloy during solution heat treatment were studied by scanning electron microscopy(SEM),electron probe microanalysis(EPMA),and energy dispersive spectroscopy(EDS).The solidus and liquidus of single crystal alloy were obtained by differential scanning calorimetry(DSC).Results show that the mosaic-like eutectic and fan-like eutectic are dissolved at first,and the coarseγ'phase is dissolved later during the solution heat treatment of 1,390°C/2 h+1,310°C/4 h+1,320°C/10 h+air cooling(AC).The composition segregations of Al,Ta,W and Re are 0.99,0.96,1.04 and 1.16,respectively,which close to 1.The incipient melting is caused by the low local temperature of the alloy,and the micropore region with a lower melting point is the preferred position for incipient melting.

Incipient motion of sediment in presence of submerged flexible vegetation

The presence of submerged vegetation on river beds can change the water flow structure and alter the state of sediment motion. In this study, the incipient motion of sediment in the presence of submerged flexible vegetation in open channels was investigated in a laboratory experiment. The vegetation was simulated with flexible rubber cylinders arranged in parallel arrays. The effect of the vegetation density, water depth, and sediment grain size on the incipient motion was investigated. The experimental results indicate that the incipient motion velocity of sediment increases as the vegetation density decreases and the water depth and sediment grain size increase. With flexible plants, the incipient motion velocity of sediment is lower than it is without vegetation, and is larger than it is with rigid vegetation. A general incipient motion velocity equation was derived, which can be applied to both flexible and rigid vegetation conditions.

Incipient Motion of Sediment Under Currents

Summarized in the paper are the author's studies on incipient motion of sediment in recent 40 years. In addition to the forces of gravity, drag and lift, the cohesive force and the additional static pressure are important for fine particles. The relations between three stages of incipient motion are defined by use of instantaneous velocity. Formulas for initial velocity and critical shear stress are given and overall verified by the author's and others' experimental data.

Rheological Properties and Incipient Motion of Cohesive Sediment in the Haine Estuary of China

The Haihe cohesive sediment, which is typical in China, is studied systematically for its basic physical and incipient motion properties. Following the requirements of dredging works in the Haihe Estuary, cohesive sediment samples were taken from three locations. Laboratory experiments were conducted to determine the rheological properties of these samples and to examine the incipient motion of the cohesive sediment. It is found that the cohesive sediment has an obvious yield stress tau(b), which increases with the mud density in a manner of an exponential function, and so does the viscosity parameter eta. The cohesive sediment behaves like a Bingham fluid when its density is below 1.38 similar to 1.40 g/cm(3), and when denser than these values, it may become a power-law fluid. The incipient motion experiment also revealed that the incipient velocity of the cohesive sediment increases with die density in an exponential manner. Therefore, the incipient motion is primarily related to the density, which is different from the case for non-cohesive sediment in which the incipient motion is con-elated with the diameter of sand particles instead. The incipient motion occurs in two different ways depending on the concentration of mud in the bottom. For sufficiently fine particles and a concentration lower than 1.20 g/cm(3), the cohesive sediment appears as fluidized mud, and the incipient motion is in the form of instability of an internal wave. For a higher concentration, the cohesive sediment appears as general quasi-solid-mud, and the incipient motion can be described by a series of extended Shields curves each with a different porosity for newly deposited alluvial mud.

Incipient mechanical fault detection based on multifractal and MTS methods

An incipient mechanical fault detection method, combining multifractal theory and Mahalanobis-Taguchi system （MTS）, which is based on statistical technology, is proposed in this paper. Multifractal features of vibration signals obtained from machine state monitoring are extracted by multifractal spectrum analysis and generalized fractal dimensions. Considering the situation of mass samples of normal mechanical running state and few fault states, the feature parameters corresponding to different mechanical running states are further optimized by a statistical method, based on which incipient faults are subsequently identified and diagnosed accurately. Experimental results proved that the method combining multifractal theory and MTS can be used for incipient fault state recognition effectively during the mechanical running process, and the accuracy of fault state identification is improved.

Incipient melting phase and its dissolution kinetics for a new superalloy

Based on XRD,SEM and EDS analyses,the phases in GH4151 alloy were identified.Differential scanning calorimetry(DSC)experiment and metallographic method were carried out to determine the incipient melting temperature(IMT)of the alloy.The result shows that the IMT of alloy is situated between 1150 and 1160℃.Subsequently,the dissolution process of Laves phase was carried out,and the dissolution kinetic equations were obtained at different temperatures.And then based on the verification of experiments,the model was confirmed to be credible to predict the fraction of the Laves phase dissolution.Finally,the results of diffusion coefficients indicate that the diffusion of Nb element is a critical factor for homogenization process of GH4151 alloy.

Phase equilibrium modeling of incipient charnockite formation in NCKFMASHTO and MnNCKFMASHTO systems:A case study from Rajapalaiyam,Madurai Block,southern India

Incipient charnockites represent granulite formation on a mesoscopic scale and have received considerable attention in understanding fluid processes in the deep crust. Here we report new petrological data from an incipient charuockite locality at Rajapalaiyam in the Madurai Block, southern India, and discuss the petrogenesis based on mineral phase equilibrium modeling and pseudosection analysis. Rajapalaiyam is a key locality in southern India from where diagnostic mineral assemblages for ultrahigh-temperature （UHT） metamorphism have been reported. Proximal to the UHT rocks are patches and lenses of charnockite （Kfs＋Qtz ＋Pl＋ Bt ＋ Opx＋ Grt ＋Ilm） occurring within Opx-free Grt-Bt gneiss （Kfs ＋Pl ＋ Qtz ＋ Bt ＋ Grt ＋ Ilm ＋ Mt） which we report in this study. The application of mineral equilibrium modeling on the charnockitic assemblage in NCKFMASHTO system yields a p-T range of 820 ℃ and -9 kbar. Modeling of the charnockite assemblage in the MnNCKFMASHTO system indicates a slight shift of the equilibrium condition toward lower p and T （- 760 ℃ and - 7.5 kbar）, which is consistent with the results obtained fiom geothermobarometry （710--760 ℃, 6.7-7.5 kbar）, but significantly lower than the peak temperatures （〉1000 ℃） recorded from the UHT rocks in this locality, suggesting that charnockitization is a post-peak event. The modeling of 7 versus molar H2O content in the rock （M（H2O）） demonstrates that the Opx-bearing assemblage in charnockite and Opx- free assemblage in Grt-Bt gneiss are both stable at M（H2O） = 0.3 mol%--0.6 mol%, and there is no significant difference in water activity between the two domains. Our finding is in contrast to the previous petrogenetic model of incipient charnockite formation which envisages lowering of water activity and stabilization of orthopyroxene through breakdown of biotite by dehydration caused by the infiltration of CO2-rich fluid. T-XFe3＋ （= Fe2O3/（FeO ＋ Fe2O3） in mole） pseudosections suggest that the oxidation condition of the rocks played a major role on the stability of orthopyroxene; Opx is stable at XFe3＋〈0.03 in charnockite, while Opx-free assemblage in Grt-Bt gneiss is stabilized at XFe3＋ 〉0.12. Such low oxygen fugacity conditions of XFe3＋ 〈0.03 in the charnockite compared to Ort-Bt gneiss might be related to the infiltration of a reduced fluid （e.g., H2O ＋ CH4） during the retrograde stage.

A method for simulating sediment incipient motion varying with time and space in an ocean model(FVCOM):development and validation

We modified the sediment incipient motion in a numerical model and evaluated the impact of this modification using a study case of the coastal area around Weihai, China. The modified and unmodified versions of the model were validated by comparing simulated and observed data of currents, waves, and suspended sediment concentrations(SSC) measured from July 25^(th) to July 26^(th), 2006. A fitted Shields diagram was introduced into the sediment model so that the critical erosional shear stress could vary with time. Thus, the simulated SSC patterns were improved to more closely reflect the observed values, so that the relative error of the variation range decreased by up to 34.5% and the relative error of simulated temporally averaged SSC decreased by up to 36%. In the modified model, the critical shear stress values of the simulated silt with a diameter of 0.035 mm and mud with a diameter of 0.004 mm varied from 0.05 to 0.13 N/m^2, and from 0.05 to 0.14 N/m^2, respectively, instead of remaining constant in the unmodified model. Besides, a method of applying spatially varying fractions of the mixed grain size sediment improved the simulated SSC distribution to fit better to the remote sensing map and reproduced the zonal area with high SSC between Heini Bay and the erosion groove in the modified model. The Relative Mean Absolute Error was reduced by between 6% and 79%, depending on the regional attributes when we used the modified method to simulate incipient sediment motion. But the modification achieved the higher accuracy in this study at a cost of computation speed decreasing by 1.52%.

Incipient charnockites from southern India:The role of brines

Southern India and Sri-Lanka are the places where “incipient charnockites”,i.e.the local transformation of amphibolite-facies gneisses into orthopyroxene-bearing,igneous looking charnockites,have been discovered in the early sixties.The fact that some incipient charnockites occur along a network of brittle fractures,together with CO2 remnants preserved in mineral inclusions,had called for the role of fluids during charnockite alteration.The present work presents new observations on fluid inclusions and microtextures of incipient charnockites from type localities in southern India.In addition to CO2-rich fluid inclusions in quartz and feldspar,all of the occurrences have disrupted remnants of concentrated aqueous alkali chloride solutions.CO2 inclusions are more abundant in paragneiss (Kerala) than in orthogneiss (Karnataka/Tamil Nadu).The finding of disrupted brine inclusions in the Kabbal charnockite is a key link between closely associated massive charnockites and Closepet Granite,both of which also share the brine remnants.All of the occurrences studied here have feldspar or feldspar-quartz microvein networks along grain boundaries of recrystallized quartz,feldspar and orthopyroxene.These metasomatic veins again indicate the action of alkali-exchanging fluids (i.e.,saline solutions).Feldspar microveins,which have been found in most “massive” charnockites,along with the CO2-rich fluid inclusions,suggest a commonality of incipient charnockite and massive charnockite,both types differing in intensity of interaction with metasomatizing pore fluids.

Shear velocity criterion for incipient motion of sediment

The prediction of incipient motion has had great importance to the theory of sediment transport. The most commonly used methods are based on the concept of critical shear stress and employ an approach similar, or identical, to the Shields diagram. An alternative method that uses the movability number, defined as the ratio of the shear velocity to the particle＇s settling velocity, was employed in this study. A large amount of experimental data were used to develop an empirical incipient motion criterion based on the movability number. It is shown that this approach can provide a simple and accurate method of computing the threshold condition for sediment motion.

Dielectric Characteristics in BiFeO3-Modified SrTiO3 Incipient Ferroelectric Ceramics

We investigate the dielectric and ferroelectric properties of Sr1-xBixTi1-xFex03 solid solutions （x =0, 0.05, 0.1, 0.15 and 0.2） together with their structures. Through the analysis of Rietveld refinement of powder x-ray diffraction, a cubic structure in space group Pm3m is determined for all the compositions. An obvious dielectric relaxation peak differing from SrTiO3 is observed in the present ceramics. The peak temperature Tm increases with increasing x, and it approaches room temperature at x =0.2. The Vogel Fulcher law and Curie Weiss law fittings further confirm the relaxor ferroelectricity in the present ceramics.

Feather Vibration as a Stimulus for Sensing Incipient Separation in Falcon Diving Flight

Based on our preceding studies on the aerodynamics of a falcoperegrinus in diving flight along a vertical dam it is known that even when the body shape of the bird is rather streamlined in V-shape some feathers tips may elevate in certain regions of the body. These regions were identified in wind tunnel tests for typical diving flight conditions as regions of locally separated flow. A life-size model in V-shape of a falcoperegrinus with artificial feathers fixed along the body was studied in a wind tunnel to focus on the fluid-structure interaction of feathers located in this sector. The distal ends of the feathers show flow-induced vibrations at typical flight conditions which grow linear in amplitude with increasing angle of incidence until incipient separation. In light of the proven existence of vibration-sensitive mechanoreceptors in the follicles of secondary feathers in birds it is hypothesized that this linear amplitude response offers the bird to sense the angle of incidence during the diving flight using the vibration magnitude as sensory stimulus. Thus the bird in streamlined shape has still a good measure to control its attitude to be in the narrow window of safe angle of incidence. This might have implications also for other birds or technical applications of airfoil sensors regarding incipient separation detection.

Influence of Carbon Content and Solidification Condition on Incipient Melting of DS Superalloy MAR-M200+2Hf

Hf lowers the incipient melting temperature of superalloy. As carbon content in Hf-bearing alloy decreases, the incipient melting temperature drops furthey. PD ingots have stronger tendency to incipient melting than HRS ones. Even though in PD ingot, the sensitivities at both ends of the ingot are quite different. The melting of Ni_5Hf phase may be considered as one of the main factors affecting incipient melting. The more Ni_5Hf the alloy contains, the more serious the incipient melting becomes. The results of differential thermal analysis (DTA) have proved that the peak of 1135-1160℃ corresponds to the melting range or Ni_5Hf. By means of a pretreatment at 1150℃, 8h, Ni_5Hf phase can be eliminated in two ways: the reaction Ni_5Hf+γ(C)→MC_(2)+γ and solid solution, and therefore the final solid solution treatment can be carried out at 1260℃. This brings about a high homogenized structure and further increases the stress rupture properties of the alloy at 1040℃, 140 MPa.

Experimental Study on Silt Incipient Motion Under Wave Action

Experiments on silt incipient motion under wave action were carried out. Under wave action, for different wave periods, water depths and bulk densities of silt, the shear stress or height of waves for incipient motion was determined, and a relation between the shear stress and bulk density of silt was established. Results indicate that the critical shear stress depends on the structure of the silt itself, related to the tightness between the grains （or bulk density）. Exterior condition is only an external cause of silt incipient motion, and the critical shear stress for the incipient motion is the token of exterior condition.

Incipient Gear Fault Detection Using Adaptive Impulsive Wavelet Filter Based on Spectral Negentropy

Adaptive wavelet filtering is a very important fault feature extraction method in the domain of condition monitoring;however, owing to the time-consuming computation and difficulty of choosing criteria used to represent incipient faults, the engineering applications are limited to some extent. To detect incipient gear faults at a fast speed, a new criterion is proposed to optimize the parameters of the modified impulsive wavelet for constructing an optimal wavelet filter to detect impulsive gear faults. First, a new criterion based on spectral negentropy is proposed. Then, a novel search strategy is applied to optimize the parameters of the impulsive wavelet based on the new criterion. Finally,envelope spectral analysis is applied to determine the incipient fault characteristic frequency. Both the simulation and experimental validation demonstrated the superiority of the proposed approach.

IMPACT OF AIR-SEA INTERACTION ON THE GENESIS OF TROPICAL INCIPIENT VORTEX OVER SOUTH CHINA SEA： A CASE STUDY

Based on 6-hourly sensible heat flux and latent heat flux from the NCEP Climate Forecast System Reanalysis(CFSR) and circulation data from the Japanese 25-year Reanalysis(JRA-25),the initial developing process of tropical cyclone Mindulle(1005) in 2010 has been diagnosed to reveal the impact of air-sea interaction over the South China Sea(SCS) on the genesis of its incipient vortex.The results show that the incipient vortex first occurred east of the Luzon Island on 0000 UTC 20 August,suggesting that the topographic forcing of the Luzon Island for easterly winds over the western Pacific might be one of the factors responsible for the formation of the incipient vortex.During the formation stage of the incipient vortex,strong southeasterlies over the SCS caused warm water of the middle and eastern SCS to flow toward the Luzon Island due to Ekman transport resulting from wind stress,leading to an increase of the sea surface temperature and sensible heat flux into the atmosphere.Although the anomalous sensible heating favored surface pressure to reduce,it was not conducive to the increase of local vorticity associated with the vortex above the heating area because,according to the atmospheric thermal adaptation theory,the anticyclonic vorticity would be created in the lower troposphere due to the decreased vertical gradient of the sensible heating.However,the ascending motions occurred over the eastern area of the anomalous sensible heating due to the augmentation of the vorticity advection with increasing height,causing water vapor to condense in the middle and upper troposphere.In turn,cyclonic vorticity was generated in the lower troposphere due to the increased vertical gradient of the condensation latent heating,resulting in the formation and further growth of the incipient vortex.Therefore,the vorticity creation due to the condensation heating played a dominant role during the subsequent enhancing stage of the incipient vortex.

Indenter size effect on the reversible incipient plasticity of Al(001) surface:Quasicontinuum study

Indenter size effect on the reversible incipient plasticity of Al(001) surface is studied by quasicontinuum simulations.Results show that the incipient plasticity under small indenter, the radius of which is less than ten nanometers, is dominated by a simple planar fault defect that can be fully removed after withdrawal of the indenter; otherwise, irreversible incipient plastic deformation driven by a complex dislocation activity is preferred, and the debris of deformation twins, dislocations,and stacking fault ribbons still remain beneath the surface when the indenter has been completely retracted. Based on stress distributions calculated at an atomic level, the reason why the dislocation burst instead of a simple fault ribbon is observed under a large indenter is the release of the intensely accumulated shear stress. Finally, the critical load analysis implies that there exists a reversible-irreversible transition of incipient plasticity induced by indenter size. Our findings provide a further insight into the incipient surface plasticity of face-centered-cubic metals in nano-sized contact issues.

Conditions of Incipient Motion of Pebbles Based on Shape and the Equivalent Grain Size

Incipient motion of pebbles is an unsteady and random process,the main influence factors are pebble shape,non-uniformity,location in bed and flow condition.By virtue of the concept of the equivalent grain size,it is shown that d_ηfollows a normal distribution following a regression analysis of measured data.Consid- ering the influence of pebble shape and the relative exposure degree,formula of calculating the incipient veloc- ity for pebbles is deduced based on the equivalent grain size of pebble and the...

Incipient Motion of Bed Load Sediment and Its Application in the Three Gorges Hydro Project

A formula for the calculation of critical shear stress of non-uniform sediment was developed by on river bed has been established while considering the relative degree expose of grains.The values of the Coeffi- cients in the formula have been obtained.The formula has been verified with prototype observation data, flumes data of both nature and lightweight sand.The computed results fully reflect the characteristics of thresh- old motion of non-uniform sediment.The result have been used in some physical mo...

The efficacy and safety of Chinese herbal medicine combined with ACEI/ARB fortreatment of incipient diabetic nephropathy： Ameta-analysis

Objective： This meta- analysis evaluated the efficacy and safety of Chinese herbal medicine （CHM） combined withangiotensin-converting enzyme inhibitors （ACEIs） and/or angiotensin-receptor blockers （ARBs）for treatment ofincipient diabetic nephropathy（IDN）. Methods： Nine data bases were searched for randomized controlled trials ofChinese herbal medicine（CHM） and ACEI/ARB for treatment of IDN. Included articles were published betweenJanuary2006 and December 2016. All studies were divided into prescriptions containing both Astragali Radix andRehmanniae Radix （i subgroup）, Astragali Radix（Huangqi） or Rehmanniae Radix（Dihuang） （ii subgroup）, neitherAstragali Radix nor Rehmanniae Radix （iii subgroup）. Review Manager 5.3 was used for subgroup analysis.Results： In total, 28 RCTs with 2017 patients were included. The results showed 1）the urinary albumin excretionrate （UAER） can be reduced significantly using CHM with ACEI or ARB for treatment of IDN compared to ACEIor ARB alone, and reduction of the UAER of the i subgroup was superior to that of the other two subgroups;2）serum creatinine （Scr） levels can be reduced significantly using CHM combined with ACEI or ARB, andreduction of Scr in the ii subgroup was superior to that in the iii subgroup; 3）reduction of BUN in group A was notbetter than that in group B. Conclusion： In summary, CHMs combined with ACEI/ARB can decrease UAER andScr significantly compared to the use of ACEI/ARB during IDN treatment. The effect was more significant in theCHM group containing Astragali Radix or Rehmanniae Radix. The application of Astragali Radix and RehmanniaeRadix should be emphasized in third stage diabetic nephropathy.