Incipient motion of sediment in presence of submerged flexible vegetation

The presence of submerged vegetation on river beds can change the water flow structure and alter the state of sediment motion. In this study, the incipient motion of sediment in the presence of submerged flexible vegetation in open channels was investigated in a laboratory experiment. The vegetation was simulated with flexible rubber cylinders arranged in parallel arrays. The effect of the vegetation density, water depth, and sediment grain size on the incipient motion was investigated. The experimental results indicate that the incipient motion velocity of sediment increases as the vegetation density decreases and the water depth and sediment grain size increase. With flexible plants, the incipient motion velocity of sediment is lower than it is without vegetation, and is larger than it is with rigid vegetation. A general incipient motion velocity equation was derived, which can be applied to both flexible and rigid vegetation conditions.

Incipient Motion of Sediment Under Currents

Summarized in the paper are the author's studies on incipient motion of sediment in recent 40 years. In addition to the forces of gravity, drag and lift, the cohesive force and the additional static pressure are important for fine particles. The relations between three stages of incipient motion are defined by use of instantaneous velocity. Formulas for initial velocity and critical shear stress are given and overall verified by the author's and others' experimental data.

Rheological Properties and Incipient Motion of Cohesive Sediment in the Haine Estuary of China

The Haihe cohesive sediment, which is typical in China, is studied systematically for its basic physical and incipient motion properties. Following the requirements of dredging works in the Haihe Estuary, cohesive sediment samples were taken from three locations. Laboratory experiments were conducted to determine the rheological properties of these samples and to examine the incipient motion of the cohesive sediment. It is found that the cohesive sediment has an obvious yield stress tau(b), which increases with the mud density in a manner of an exponential function, and so does the viscosity parameter eta. The cohesive sediment behaves like a Bingham fluid when its density is below 1.38 similar to 1.40 g/cm(3), and when denser than these values, it may become a power-law fluid. The incipient motion experiment also revealed that the incipient velocity of the cohesive sediment increases with die density in an exponential manner. Therefore, the incipient motion is primarily related to the density, which is different from the case for non-cohesive sediment in which the incipient motion is con-elated with the diameter of sand particles instead. The incipient motion occurs in two different ways depending on the concentration of mud in the bottom. For sufficiently fine particles and a concentration lower than 1.20 g/cm(3), the cohesive sediment appears as fluidized mud, and the incipient motion is in the form of instability of an internal wave. For a higher concentration, the cohesive sediment appears as general quasi-solid-mud, and the incipient motion can be described by a series of extended Shields curves each with a different porosity for newly deposited alluvial mud.

Shear velocity criterion for incipient motion of sediment

The prediction of incipient motion has had great importance to the theory of sediment transport. The most commonly used methods are based on the concept of critical shear stress and employ an approach similar, or identical, to the Shields diagram. An alternative method that uses the movability number, defined as the ratio of the shear velocity to the particle＇s settling velocity, was employed in this study. A large amount of experimental data were used to develop an empirical incipient motion criterion based on the movability number. It is shown that this approach can provide a simple and accurate method of computing the threshold condition for sediment motion.

Experimental Study on Silt Incipient Motion Under Wave Action

Experiments on silt incipient motion under wave action were carried out. Under wave action, for different wave periods, water depths and bulk densities of silt, the shear stress or height of waves for incipient motion was determined, and a relation between the shear stress and bulk density of silt was established. Results indicate that the critical shear stress depends on the structure of the silt itself, related to the tightness between the grains （or bulk density）. Exterior condition is only an external cause of silt incipient motion, and the critical shear stress for the incipient motion is the token of exterior condition.

Incipient Motion of Bed Load Sediment and Its Application in the Three Gorges Hydro Project

A formula for the calculation of critical shear stress of non-uniform sediment was developed by on river bed has been established while considering the relative degree expose of grains.The values of the Coeffi- cients in the formula have been obtained.The formula has been verified with prototype observation data, flumes data of both nature and lightweight sand.The computed results fully reflect the characteristics of thresh- old motion of non-uniform sediment.The result have been used in some physical mo...

INCIPIENT MOTION OF NON-COHESIVE SEDIMENT UNDER ICE COVER-AN EXPERIMENTAL STUDY

Based on a series of experiments under both ice-covered and free surface conditions, the present article discusses the role of flow velocity and critical shear Reynolds number for incipient motion of bed material. The influence of the resistance coefficients of both the underside of the ice cover and the channel bed on the location of the maximum velocity has been discussed. In addition, the impacts of ice and composite resistance coefficients on flow velocity for incipient motion of bed material have been assessed. The diagram describing the critical shear Reynolds number and the dimensionless shear stress for the incipient motion of sediment under ice covered conditions with different under cover resistance coefficient has been established. The effects of grain size on densimetric Froude number for incipient motion of bed material have been investigated. A relationship between the densimetric Froude number for incipient motion of bed material and the median grain size of bed material as well as the roughness coefficient of channel bed and roughness coefficient of ice cover has been established.

Modelling erosion of a single rock block using a coupled CFD-DEM approach

Rock block removal is the prevalent physical mechanism for rock erosion and could affect the stability of dam foundations and spillways.Despite this,understanding of block removal is still inadequate because of the complex interactions among block characteristics,hydraulic forces,and erosive processes acting on the block.Herein,based on a previously conducted physical experiment of erosion of a single rock block,the removal processes of two different protruding blocks are represented by a coupled computational fluid dynamics-discrete element model(CFD-DEM)approach under varied flow conditions.Additionally,the blocks could be rotated with respect to the flow direction to consider the effect of the discontinuity orientation on the block removal process.Simulation results visualize the entire block removal process.The simulations reproduce the effects of the discontinuity orientation on the critical flow velocity inducing block incipient motion and the trajectory of the block motion observed in the physical experiments.The numerical results present a similar tendency of the critical velocities at different discontinuity orientations but have slightly lower values.The trajectory of the block in the simulations fits well with the experimental measurements.The relationship between the dimensionless critical shear stress and discontinuity orientation observed from the simulations shows that the effect of block protrusion becomes more dominant on the block incipient motion with the increase of relative protrusion height.To our knowledge,this present study is the first attempt to use the coupled finite volume method(FVM)-DEM approach for modelling the interaction behavior between the block and the flowing water so that the block removal process can be reproduced and analyzed.

Sand particle dislodgement in windblown sand

The incipient motion of sand particle from sand bed plays a very important role in the prediction of windblown sand.In this paper,we proposed a new method for predicting the incipient motion of sand particle based on wind speed fluctuation as follows,when the wind speed is larger than the critical wind speed,if the total impulse on sand particle is larger than the critical impulse,incipient motion of sand particle would take place,otherwise if not.Furthermore,from the analysis of entrainment in the rolling and lifting modes,we come to the following conclusion.When the average wind speed is smaller than the critical wind speed,if the average wind speed is used to judge the incipient motion of sand particle,one will underestimate the number of sand particles jumping from the bed,if the instantaneous wind speed is used to judge incipient motion of sand particle,one will overestimate the number of sand particles jumping from the bed;When the average wind speed is larger than the critical wind speed,either the average or the instantaneous wind speeds is used to judge the incipientmotion of sand particles,one will overestimate the number of sand particles jumping from the bed.

The Effect of Grain Properties for Artificial Bedload Supply

The German Armed Forces University in Munich has conducted experiments in a laboratory flume to determine the influence of roundness on bed load transport.The investigations were assigned by the German Federal Institute of Hydrology (BIG),with a focus on incipient motion,transport velocity and the depth of mixing into the riverbed. The results of the experiments show that the transport velocity of angular graim is lower and the critical shear stress for incipient motion is slightly higher than of well-ro...

Incipient sediment motion in vegetated open-channel flows predicted by critical flow velocity

Incipient sediment motion plays a key role in scouring and bed load transport. However, the incipient sediment motion in the vegetated open-channel flows has yet to be fully understood. This study aims to quantify the critical conditions of the sediment particle movement in the presence of emergent and submerged vegetation. A new formula of the critical flow velocity was proposed to predict the incipient sediment motion based on the force balance equation of a sediment particle and the assumption that the velocity distribution in the bed roughness boundary layer fits the logarithmic law. Analysis of the derived formula revealed that the critical flow velocity for incipient sediment motion decreases with the increase in vegetation density. The proposed formula agrees well with the experimental data in the literature, thereby implying that the critical flow velocity can effectively quantify the incipient sediment motion in the vegetated open channel flows.

CRITICAL UNIT STREAM POWER FOR SEDIMENT TRANSPORT

Yang's (1996) sediment transport theory based on unit stream power is one ofthe most accurate theories, but in his equations the use of product of slope and critical velocityinstead for critical unit stream power is not suitable. Dimensionless critical unit stream powerrequired at incipient motion can be derived from the principle of conservation of power as afunction of dimensionless particle diameter and relative roughness. Based on a lot of data sets,this new criterion was developed. By use of this new criteria, Yang's (1973) sand transport formulaand his 1984 gravel transport formula could be improved when sediment concentration is less thanabout 100 ppm by weight.