The Approach of Compensation of Air Refractive Index in Thermal Expansion Coefficients Measurement Based on Laser Feedback Interferometry

We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.

Base Flow Index Evaluation for Yom River,Thailand

The most controversial river in Thailand is the Yom River.It has not been modified by large dam because of several valuable natural resources.Therefore,the river is flooded in rainy season and very low flow in dry season.The low flow causes drought which is much more serious than flooding.The Yom River Basin management is only way to circumvent the low flow problem by studying base flow index(BFI).Base flow analyses for 8 gauging stations along the river were performed by 2 techniques i.e.graphical and modified U.K.Institute of Hydrology(MIH).The mean BFI results from graphical and MIH are 0.37(0.05)and 0.45(0.12).The result from graphical is more reasonable due to its lower standard deviation.BFI values from MIH vary with watershed area which may result from the using of fixing value of N-day at 10.Solution for this problem is ongoing in this study.

Use of Selection Indices Based on Multivariate Analysis for Improving Grain Yield in Rice

In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The traits of the parents (30 plants), F1 (30 plants) and F2 generations (492 individuals) were evaluated at the Rice Research Institute of Iran (RRII) during 2007. Heritabilities of the number of panicles per plant, plant height, days to heading and panicle exsertion were greater than that of grain yield. The selection indices were developed using the results of multivariate analysis. To evaluate selection strategies to maximize grain yield, 14 selection indices were calculated based on two methods (optimum and base) and combinations of 12 traits with various economic weights. Results of selection indices showed that selection for grain weight, number of panicles per plant and panicle length by using their phenotypic and/or genotypic direct effects (path coefficient) as economic weights should serve as an effective selection criterion for using either the optimum or base index.

城市扩张对区域生态安全格局影响研究——以合肥市为例

城市用地空间扩张对生态环境的影响映射出人类社会活动和生态环境保护之间的交互作用,系统地研究城市空间无序蔓延所诱发的城市土地利用方式变化对城市生态环境的影响程度,对助推中国生态文明建设目标具有重要现实意义。为探究合肥市城市扩张对生态安全格局的影响程度,综合运用生态遥感指数、最小累积阻力模型、电路理论和斑块生成土地利用模拟模型,构建合肥市生态安全格局,识别生态夹点和生态障碍点,再从模拟验证的基础上(总体精度为94.71%,Kappa系数为90.04%,Fom值为0.102),预测了2030—2040年的城市扩张,并根据预测结果探讨城市扩张对区域生态安全格局影响程度。研究发现:合肥市生态环境质量整体呈现南高中低的分布格局,识别出合肥市生态源地共计35处,源地间活跃生态廊道70条,非活跃廊道共17条,生态夹点290个,生态障碍点112个。2020—2040年合肥市城乡、工矿居民用地、林地、水域和未利用土地面积将不断增加,而耕地以及草地面积将持续减少。2020—2040年期间城镇建成区分别侵占了生态廊道、源地、夹点、障碍点面积为55.95、10.51、1.04、1.35 km 2。研究结果可为今后快速发展城市的生态环境治理和国土空间生态保护修复工作提供理论依据和技术参考。

The Assessment of Groundwater Vulnerability Due to Leaching of Chemicals: The Review of Attenuation Factor

To assess the groundwater vulnerability due to leaching of chemicals, the groundwater system in the unsaturated zone is characterized by conceptual models that are further extended and refined with more detailed mathematical models to understand the governing physical processes in detail. However, due to lack of data and uncertainty level, an intermediate transition through index based models is researched. The attenuation factor (AF) approach, which works under the assumption that the chemicals degrade following a first-order kinetics and determines the fraction of the chemicals that goes to groundwater table, is one of the index based models that has been widely used due to its simplicity. Therefore, the objective of this paper is to review the research works done using the AF approach, to outline the future research needs. Furthermore, the mathematical implementation of the AF approach and the associated uncertainty levels is explained through an example and MATLAB source code.

Parameter analysis of a photonic crystal fiber with raised-core index profile based on effective index method

Photonic crystal fibers （PCFs） with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index difference between the index of the core and the effective index of the cladding, we improve the characteristic parameters such as numerical aperture and V-parameter, and reduce its bending loss to about one tenth of a conventional PCF. Implementing such a structure in PCFs may be one step forward to achieve low loss PCFs for communication applications.

A comprehensive review of significant researches on content based indexing and retrieval of visual information

Developments in multimedia technologies have paved way for the storage of huge collections of video doc- uments on computer systems. It is essential to design tools for content-based access to the documents, so as to allow an efficient exploitation of these collections. Content based anal- ysis provides a flexible and powerful way to access video data when compared with the other traditional video analysis tech- niques. The area of content based video indexing and retrieval （CBVIR）, focusing on automating the indexing, retrieval and management of video, has attracted extensive research in the last decade. CBVIR is a lively area of research with endur- ing acknowledgments from several domains. Herein a vital assessment of contemporary researches associated with the content-based indexing and retrieval of visual information. In this paper, we present an extensive review of significant researches on CBV1R. Concise description of content based video analysis along with the techniques associated with the content based video indexing and retrieval is presented.

Refractive index insensitive temperature sensor based on waist-enlarged few mode fiber bitapers

A refractive index insensitive temperature sensor based on waist-enlarged few mode fiber(FMF) bitapers is presented. The first section of FMF is spliced between two single-mode fibers. In fusion process,the waist-enlarged FMF bitapers can be obtained by large current discharging repeatedly. The refractive index and temperature sensing mechanisms are analyzed. For the sensors with different sizes,the refractive index and temperature experiments have been performed. The results show that in the refractive index ranges of 1.335 0—1.346 6 and 1.348 2—1.419 3,the refractive index insensitivity is verified. In a temperature range of 31.9—90 °C,the sensor sensitivity can be up to 85.57 pm/°C. In addition,it has a compact structure. Therefore,the sensor can avoid the cross sensitivity for measuring the refractive index and temperature simultaneously.

Intermodal interference based refractive index sensor employing elliptical core photonic crystal fiber

A refractive index(RI)sensor based on elliptical core photonic crystal fiber(EC-PCF)has been proposed.The asymmetric elliptical core introduces the polarization-dependent characteristics of the fiber core modes.The performances of intermodal interference between the intrinsic polarization fiber core modes are investigated by contrast in two interferometers based on the Mach-Zehnder(M-Z)and Sagnac interference model.In addition,the RI sensing characteristics of the two interferometers are studied by successively filling the three layers air holes closest to the elliptical core in the cladding.The results show that the M-Z interference between LP_(01)and LP_(11)mode in the same polarized direction is featured with the incremental RI sensing sensitivity as the decreasing interference length,and the infilled scope around the elliptical core has a weak correlation with the RI sensing sensitivity.Due to the high birefringence of LP11 mode,the Sagnac interferometer has better RI sensing performance,the maximum RI sensing sensitivity of 12000 nm/RIU is achieved under the innermost one layer air holes infilled with RI matching liquid of RI=1.39 at the pre-setting EC-PCF length of 12 cm,which is two orders of magnitude higher than the M-Z interferometer with the same fiber length.The series of theoretical optimized analysis would provide guidance for the applications in the field of biochemical sensing.

Wideband reverberation suppression in beams domain based on angular distribution index

Based on the properties of wideband source’s spatial spread,an algorithm for reverberation suppression in beams domain is proposed.In an effective observation range,a compact bank of receiving spatial beams is operated to transform the data from element domain to beam domain.Angular Distribution Index(ADI) is obtained by comparing to a reference value which is computed by Monte Carlo Integration.ADI decreases with a stronger target echo.Hence,choosing an appropriate threshold of ADI,the target echo can be separated from reverberation by cutting off the high AD components.The filter is compatible with the procedures of beamforming and detection for the current sonar.The computation complexity of the filter is low.The relationships between ADI and frequency,bandwidth,signal-reverberation ratio,are illustrated by a simulation example.The processing results based on the lake-trial and sea-trial data show that reverberation can be significantly suppressed,and threshold choosing for wideband ADI filter is fault tolerant.

Efficient graph similarity join for information integration on graphs

Graphs have been widely used for complex data representation in many real applications, such as social network, bioinformatics, and computer vision. Therefore, graph similarity join has become imperative for integrating noisy and inconsistent data from multiple data sources. The edit distance is commonly used to measure the similarity between graphs. The graph similarity join problem studied in this paper is based on graph edit distance constraints. To accelerate the similarity join based on graph edit distance, in the paper, we make use of a preprocessing strategy to remove the mismatching graph pairs with significant differences. Then a novel method of building indexes for each graph is proposed by grouping the nodes which can be reached in k hops for each key node with structure conservation, which is the k-hop tree based indexing method. As for each candidate pair, we propose a similarity computation algorithm with boundary filtering, which can be applied with good efficiency and effectiveness. Experiments on real and synthetic graph databases also confirm that our method can achieve good join quality in graph similarity join. Besides, the join process can be finished in polynomial time.

Atlas of heating:Identifying regional climate-dependent heat demands in residential buildings of Iran

Due to different latitudes and variation of altitude in geographical areas in Iran,the climatic conditions of Iran are such that the variations of the heating degree-days(HDD)are in a broad range of 60 to 3000 for residential buildings in different climatic regions.In addition,in many cases,the building design and construction processes follow patterns which do not necessarily meet national energy requirements and standards.Based on these two reasons,it is essential to identify the current status of energy consumption indicators in residential buildings.That way,it gets more convenient to adopt new strategies to improve the current state of energy consumption of buildings.In this study,heating energy consumption indices of residential buildings is investigated.Using the combination of the results of statistical data analysis,questionnaires,filled in for 500 buildings,and a reference building simulation in different climates of Iran,the heating atlas of residential buildings was prepared.According to the results,the average heating energy index(HE1)of buildings in Iran can be less than 1 to more than 41.3(m^(3)(N.G)/(m^(2)-yr))depending on climatic conditions and building design and construction quality.However,in the coldest center of province,the average of this index is 26.3(m^(3)(N.G)/(m^(2)-yr))in the hottest one that is equal 2.2.The variations of the thermal base load(supply of hot water)varied from less than 13.12 to more than 378.84(m^(3)(N.G)/(person-yr)).In provincial capitals,the lowest thermal base load index(TBLI)of buildings is 24.78 and the highest is 226.49(m^(3)(N.G)/(person-yr)).In this paper,beside charts and tables,results of heating energy consumption indices are also presented in the form of graphical atlases,i.e.color contour plots,to deliver a better picture of the whole country.