Assessment and Application of Beach Quality Based on Analytic Hierarchy Process in Yangkou Beach, Qingdao

The whole-beach quality assessment is the basis of building and preserving beautiful beaches.The beach quality assessment index system and assessment standard have been established based on the attributes of beaches(including the width,slope,landform,and types),sorting coefficient,and softness degree of surface sediment.The assessment weight of each index for quality evaluation was analyzed using the analytic hierarchy process,and comprehensive scores of selected beach profiles were calculated in accordance with the light assessment standard.A beach quality evaluation model based on index weight and scores was established in this paper.The factors of 12 profiles of Yangkou Beach in Qingdao City were surveyed to carry out a quality assessment,and the comprehensive scores of each profile were calculated in accordance with the evaluation model.The results showed that the quality of Yangkou Beach can be divided into four ratings:excellent,good,medium,and poor.The excellent-quality area includes a wide and flat dry beach zone and soft,flat,and clean intertidal and subtidal zones covered with well-sorted fine sand,and leisure sports,such as volleyball,running,and swimming,are suitable for tourists.The good-quality area features a slightly narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered with fine sand and a small tidal gully,and a small amount of foreign matter;leisure sports,such as walking and running,are suitable for tourists.This study recommends the building of fixed drainage ditches or underground culverts to reduce the tidal gully.The medium-quality area consisted of a narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered by poorly sorted medium sand,a tide ditch,and a small amount of foreign matter.In this area,walking is suitable for tourists.Sand should be supplemented in the intertidal zone.The poor-quality area contained a very narrow and dry beach zone covered with poor-sorted gravel,a very chaotic intertidal zone with a considerable amount of foreign matters,such as bricks and rocks,wide tidal ditches,and an uneven subtidal zone with some reefs;leisure sports are unsuitable here.Thus,foreign matter and reefs should be removed,and the dry beach zone should be supplemented with sand.Therefore,the beach quality assessment is a very useful tool for building beautiful beaches.

The Research on the Impact Factors of the Comprehensive Evaluation of Communication Unit Camps Based on Analytic Hierarchy Process

Currently, the comprehensive assessment of the communication troops’ camp planning project is primarily qualitative, with limited quantitative evaluation. Drawing upon the relevant spirit of the Military Commission’s documents and leveraging the author’s own work experience in branch offices, this article thoroughly explores the factors influencing the comprehensive assessment of the project and proposes quantitative representation methods for these factors. Utilizing the Analytic Hierarchy Process (AHP), a hierarchical structure model and judgment matrix for the evaluation factors of the communication troops’ camp construction planning project are constructed, enabling the determination of the weightage of each factor. This provides a certain level of support and reference for the project approval and management by branch offices, while also offering valuable insights for the approval and management of camp planning and construction projects in other types of troops and battlefield projects.

Evaluation of ERP Systems Quality Model Using Analytic Hierarchy Process (AHP) Technique

The Enterprise Resource Planning (ERP) system is a complex and comprehensive software that integrates various enterprise’s functions and resources. ERP system cleanly encapsulates crosscutting concerns which cannot be encapsulated by other types of information systems like data synchronization and standardization, system complexity and system modularity. Many studies are conducted to propose software quality models with their quality characteristics. However, there is currently no dedicated software quality model that can describe and involve new features of ERP systems. Thus, this study has proposed an ERP system quality model (ERPSQM). Analytic Hierarchy Process AHP has been employed to evaluate the quality of ERPSQM. Furthermore, this proposed model can be used to make a comparison of ERP systems to help companies implement better systems.

Marginal optimization method to improve the inconsistent comparison matrix in the analytic hierarchy process

To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers' judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.

An Improved Analytic Hierarchy Process and Application in Grain Production

Value analysis of grain production influencing factors is a complex decision problem. This paper introduced a modified Analytic Hierarchy Process (AHP) accumulation factor, namely Solving Weight by AHP's Accumulation Factor Sequence Evaluating Data. We used the arithmetical average to replace the expert marking, so that the possible decision mistakes by the subjective judgments could be avoided. We computed the case with this method, which obtained attribute value of 17 influencing factors of the potential food production in Heilongjiang Province, and the result of which was reasonable.

A consistency improving method in the analytic hierarchy process based on directed circuit analysis

Test of consistency is critical for the analytic hierarchy process(AHP) methodology. When a pairwise comparison matrix(PCM) fails the consistency test, the decision maker(DM) needs to make revisions. The state of the art focuses on changing a single entry or creating a new matrix based on the original inconsistent matrix so that the modified matrix can satisfy the consistency requirement. However, we have noticed that the reason that causes inconsistency is not only numerical inconsistency, but also logical inconsistency, which may play a more important role in the whole inconsistency. Therefore, to realize satisfactory consistency, first of all, we should change some entries that form a directed circuit to make the matrix logically consistent, and then adjust other entries within acceptable deviations to make the matrix numerically consistent while preserving most of the original comparison information. In this paper, we firstly present some definitions and theories, based on which two effective methods are provided to identify directed circuits. Four optimization models are proposed to adjust the original inconsistent matrix. Finally, illustrative examples and comparison studies show the effectiveness and feasibility of our method.

Multiobjective optimal dispatch of microgrid based on analytic hierarchy process and quantum particle swarm optimization

Owing to the rapid development of microgrids(MGs)and growing applications of renewable energy resources,multiobjective optimal dispatch of MGs need to be studied in detail.In this study,a multiobjective optimal dispatch model is developed for a standalone MG composed of wind turbines,photovoltaics,diesel engine unit,load,and battery energy storage system.The economic cost,environmental concerns,and power supply consistency are expressed via subobjectives with varying priorities.Then,the analytic hierarchy process algorithm is employed to reasonably specify the weight coefficients of the subobjectives.The quantum particle swarm optimization algorithm is thereafter employed as a solution to achieve optimal dispatch of the MG.Finally,the validity of the proposed model and solution methodology are con firmed by case studies.This study provides refere nee for mathematical model of multiojective optimizati on of MG and can be widely used in current research field.

Landslide susceptibility analysis of Karakoram highway using analytical hierarchy process and scoops 3D

Landslides are prevalent,regular,and expensive hazards in the Karakoram Highway(KKH)region.The KKH connects Pakistan with China in the present China-Pakistan Economic Corridor(CPEC)context.This region has not only immense economic importance but also ecological significance.The purpose of the study was to map the landslide-prone areas along KKH using two different techniquesAnalytical Hierarchy Process(AHP)and Scoops 3 D model.The causative parameters for running AHP include the lithology,presence of thrust,land use land cover,precipitation,and Digital Elevation Model(DEM)derived variables(slope,curvature,aspect,and elevation).The AHP derived final landslide susceptibility map was classified into four zones,i.e.,low,moderate,high,and extremely high.Over 80%of the study area falls under the moderate(43%)and high(40%)landslide susceptible zones.To assess the slope stability of the study area,the Scoops 3 D model was used by integrating with the earthquake loading data.The results of the limit equilibrium analysis categorized the area into four groups(low,moderate,high,and extremely high mass)of slope failure.The areas around Main Mantle Thrust(MMT)including Dubair,Jijal,and Kohistan regions,had high volumes of potential slope failures.The results from AHP and Scoops 3 D techniques were validated with the landslides inventory record of the Geological Survey of Pakistan and Google Earth.The results from both the techniques showed similar output that coincides with the known landslides areas.However,Scoops 3 D provides not only susceptible zones but also the range of volume of the potential slope failures.Further,these techniques could be used in other mountainous areas,which could help in the landslide mitigation measures.

GIS Based Landslide Susceptibility Mapping with Application of Analytical Hierarchy Process in District Ghizer, Gilgit Baltistan Pakistan

District Ghizer is a rugged mountainous territory which experiences several landslides each year. There are 16 major landslide areas and 53 villages that are at high risk to hazards. Keeping in view the severity of natural hazards, the present study was designed to generate landslide susceptibility map based on twelve causative factors viz., slope, aspect, elevation, drainage network, Stream Power Index (SPI), Topographic Wetness Index (TWI), lithological units, fault lines, rainfall, road network, land cover and soil texture. Soil texture was determined by particle size analysis and data for other factors were acquired from freely available sources. Analytical Hierarchy Process (AHP) was employed to identify major landslide causative factors in the district Ghizer. Further, a temporal assessment from 1999 till 2015 was generated to assess the impact of land cover change on landslides. It indicated that the barren soil/ exposed rocks and glaciers have reduced while the vegetation and water classes have shown increment. The total area that lies in moderate to very high landslide susceptible zones was 74.38%, while slope is the main landslide causative factor in the district Ghizer. Validation of the susceptibility map showed 88.1% of the landslides in the study area had occurred in the moderate to very high susceptible zones.

Comparison of Risk Assessment for a Nuclear Power Plant Construction Project Based on Analytic Hierarchy Process and Fuzzy Analytic Hierarchy Process

Recently, plant construction throughout the world, including nuclear power plant construction, has grown significantly. The scale of Korea’s nuclear power plant construction in particular, has increased gradually since it won a contract for a nuclear power plant construction project in the United Arab Emirates in 2009. However, time and monetary resources have been lost in some nuclear power plant construction sites due to lack of risk management ability. The need to prevent losses at nuclear power plant construction sites has become more urgent because it demands professional skills and large-scale resources. Therefore, in this study, the Analytic Hierarchy Process (AHP) and Fuzzy Analytic Hierarchy Process (FAHP) were applied in order to make comparisons between decision-making methods, to assess the potential risks at nuclear power plant construction sites. To suggest the appropriate choice between two decision-making methods, a survey was carried out. From the results, the importance and the priority of 24 risk factors, classified by process, cost, safety, and quality, were analyzed. The FAHP was identified as a suitable method for risk assessment of nuclear power plant construction, compared with risk assessment using the AHP. These risk factors will be able to serve as baseline data for risk management in nuclear power plant construction projects.

Relationship of public preferences and behavior in residential outdoor spaces using analytic hierarchy process and principal component analysis—a case study of Hangzhou City, China

This study examined public attitudes concerning the value of outdoor spaces which people use daily. Two successive analyses were performed based on data from common residents and college students in the city of Hangzhou, China. First, citizens registered various items constituting desirable values of residential outdoor spaces through a preliminary questionnaire. The result proposed three general attributes (functional, aesthetic and ecological) and ten specific qualities of residential outdoor spaces. An analytic hierarchy process (AHP) was applied to an interview survey in order to clarify the weights among these attributes and qualities. Second, principal factors were extracted from the ten specific qualities with principal component analysis (PCA) for both the common case and the campus case. In addition, the variations of respondents’ groups were classified with cluster analysis (CA) using the results of the PCA. The results of the AHP application found that the public prefers the functional attribute, rather than the aesthetic attribute. The latter is always viewed as the core value of open spaces in the eyes of architects and designers. Fur-thermore, comparisons of ten specific qualities showed that the public prefers the open spaces that can be utilized conveniently and easily for group activities, because such spaces keep an active lifestyle of neighborhood communication, which is also seen to protect human-regarding residential environments. Moreover, different groups of respondents diverge largely in terms of gender, age, behavior and preference.

Susceptibility assessment of debris flows using the analytic hierarchy process method——A case study in Subao river valley, China

Many debris flows have occurred in the areas surrounding the epicenter of the Wenchuan earthquake.Susceptibility assessment of debris flows in this area is especially important for disaster prevention and mitigation. This paper studies one of the worst hit areas, the Subao river valley, and the susceptibility assessment of debris flows is performed based on field surveys and remote sensing interpretation. By investigating the formation conditions of debris flows in the valley, the following assessment factors are selected: mixture density of landslides and rock avalanches, distance to the seismogenic fault, stratum lithology, ground roughness, and hillside angle. The weights of the assessment factors are determined by the analytic hierarchy process(AHP) method. Each of the assessment factors is further divided into five grades. Then, the assessment model is built using the multifactor superposition method to assess the debris flow susceptibility. Based on the assessment results, the Subao river valley is divided into three areas: high susceptibility areas, medium susceptibility areas, and low susceptibility areas. The high susceptibility areas are concentrated in the middle of the valley, accounting for 17.6% of the valley area.The medium susceptibility areas are in the middle and lower reaches, most of which are located on both sides of the high susceptibility areas and account for 45.3% of the valley area. The remainders are classified as low susceptibility areas. The results of the model are in accordance with the actual debris flow events that occurred after the earthquake in the valley, confirming that the proposed model is capable of assessing the debris flow susceptibility. The results can also provide guidance for reconstruction planning and debris flow prevention in the Subao river valley.

COLLISION AVOIDANCE DECISION-MAKING MODEL OF MULTI-AGENTS IN VIRTUAL DRIVING ENVIRONMENT WITH ANALYTIC HIERARCHY PROCESS

Collision avoidance decision-making models of multiple agents in virtual driving environ-ment are studied. Based on the behavioral characteristics and hierarchical structure of the collision avoidance decision-making in real life driving,delphi approach and mathematical statistics method are introduced to construct pair-wise comparison judgment matrix of collision avoidance decision choices to each collision situation. Analytic hierarchy process (AHP) is adopted to establish the agents' collision avoidance decision-making model. To simulate drivers' characteristics,driver factors are added to categorize driving modes into impatient mode,normal mode,and the cautious mode. The results show that this model can simulate human's thinking process,and the agents in the virtual environment can deal with collision situations and make decisions to avoid collisions without intervention. The model can also reflect diversity and uncertainty of real life driving behaviors,and solves the multi-objective,multi-choice ranking priority problem in multi-vehicle collision scenarios. This collision avoidance model of multi-agents model is feasible and effective,and can provide richer and closer-to-life virtual scene for driving simulator,reflecting real-life traffic environment more truly,this model can also promote the practicality of driving simulator.

Designing a Fuzzy Expert System to Evaluate Alternatives in Fuzzy Analytic Hierarchy Process

This paper concerns with proposing a fuzzy logic based expert system to breakthrough the problem of alternatives evaluation in Analytic Hierarchy Process (AHP). AHP as a multi criteria decision aid helped decision makers for ana-lyzing and prioritizing the alternatives in a hierarchical structure. During times AHP encountered some problems. Hence, fuzzy analytic hierarchy process (FAHP) and some other extensions of AHP have been configured to solve those problems.

Evaluation and Optimization of the Logistics Service of Agricultural Products:an Empirical Analysis Based on Analytic Hierarchy Process

This research,from the theories of management science,supply chain management and logistics engineering,on the basis of extensive investigations,and using the method of analytic hierarchy process(AHP),evaluates the present situation of logistics service of agricultural products.Taking Nanping City(Nanping)as a case,it explores the obstacles existing in current logistics service system and the factors limiting the development of agricultural product logistics service.Combining with the theory of modern logistics system,it reveals the problems in the logistics system and the causes,and then constructs the strategy of optimization for agricultural product logistics service in Nanping.The conclusion of the study can be references for the government to make scientific strategies for the development of the agricultural product logistics service and help logistics enterprises improve their service level.