Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric ...Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric grid interfacing custom power device （CPD） is controlled to perform the smart exchanging of electric power as per the Indian grid code. WE is connected to DC link of CPD for the grid integration purpose. The CPD based distributed static compensator, i.e. the distributed static synchronous compensator （DSTATCOM）, is utilized for injecting the wind power to the point of common coupling （PCC） and also acts against the reactive power demand. The novel indirect current control scheme of DSTATCOM regulates the power import and export between the WE and the electric grid system. It also acts as a compensator and performs both the key features simultaneously. Hence, the penetration of additional generated WE power to the grid is increased by 20% to 25%. The burden of reactive power compensation from grid is reduced by DSTATCOM. The modeling and simulation are done in MATLAB. The results are validated and verified.展开更多
Purpose The booster power supply of high-energy photon source is dynamic power supply,and the output is 2-Hz bias sine wave.Current-source rectifier(CSR)topology can achieve the 2-Hz current directly.Methods In order ...Purpose The booster power supply of high-energy photon source is dynamic power supply,and the output is 2-Hz bias sine wave.Current-source rectifier(CSR)topology can achieve the 2-Hz current directly.Methods In order to get the output current and good power factor of the power grid,the algorithm of“indirect current control”is applied.This method needs to measure the voltage of three phases and calculates several certain parameters of the circuit.The control strategy based on the“indirect current control”of the CSR is built in the Simulink simulation environment.Parameters and algorithms are described in detail,and the control block diagram and simulation model are given.Results The control strategy can output the right current and make a good power factor in the side of grid.Conclusions The CSR topology,as a good choice of power supply of accelerator,has a well-researched prospect.展开更多
文摘Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric grid interfacing custom power device （CPD） is controlled to perform the smart exchanging of electric power as per the Indian grid code. WE is connected to DC link of CPD for the grid integration purpose. The CPD based distributed static compensator, i.e. the distributed static synchronous compensator （DSTATCOM）, is utilized for injecting the wind power to the point of common coupling （PCC） and also acts against the reactive power demand. The novel indirect current control scheme of DSTATCOM regulates the power import and export between the WE and the electric grid system. It also acts as a compensator and performs both the key features simultaneously. Hence, the penetration of additional generated WE power to the grid is increased by 20% to 25%. The burden of reactive power compensation from grid is reduced by DSTATCOM. The modeling and simulation are done in MATLAB. The results are validated and verified.
文摘Purpose The booster power supply of high-energy photon source is dynamic power supply,and the output is 2-Hz bias sine wave.Current-source rectifier(CSR)topology can achieve the 2-Hz current directly.Methods In order to get the output current and good power factor of the power grid,the algorithm of“indirect current control”is applied.This method needs to measure the voltage of three phases and calculates several certain parameters of the circuit.The control strategy based on the“indirect current control”of the CSR is built in the Simulink simulation environment.Parameters and algorithms are described in detail,and the control block diagram and simulation model are given.Results The control strategy can output the right current and make a good power factor in the side of grid.Conclusions The CSR topology,as a good choice of power supply of accelerator,has a well-researched prospect.
