Effect of hydraulic fracturing induced stress field on weak surface activation during unconventional reservoir development

Unconventional reservoirs usually contain many weak surfaces such as faults,laminae and natural fractures,and effective activation and utilization of these weak surfaces in reservoirs can significantly improve the extraction effect.In hydraulic fracturing,when the artificial fracture approaches the natural fracture,the natural fracture would be influenced by both the original in-situ stress field and the hydraulic fracturing-induced stress field.In this paper,the hydraulic fracturing-induced stress field is calculated based on the relative position of hydraulic fracture and natural fracture,the original in-situ stress,the net pressure inside the hydraulic fracture and the pore pressure of the formation.Furthermore,the stability model of the natural fracture is established by combining the Mohr-Coulomb rupture criterion,and extensive parametric studies are conducted to explore the impact of each parameter on the stability of the natural fracture.The validity of the proposed model is verified by comparing with the reservoir characteristics and fracturing process of the X-well 150e155 formation in the Songliao Basin.It is found that the stress field induced by the hydraulic fracture inhibits the activation of the natural fracture after the artificial fracture crossed the natural fracture.Therefore,for similar reservoirs as X-well 150e155,it is suggested to connect natural fractures with hydraulic fractures first and then activate natural fractures which can effectively utilize the natural fractures and form a complex fracture network.

Boulder-induced form roughness and skin shear stresses in a gravel-bed stream

Boulder spacing in mountain rivers and near-wake flow zones within the boulder array is very useful for fish habitat and growth of aquatic organisms.The present study aims to investigate how the boulder array and spacing influence the near-bed flow structures in a gravel-bed stream.Boulders are staggered over a gravel-bed stream with three different inter-boulder spacing namely(a)large(b)medium and(c)small spacing.An acoustic Doppler velocimeter was used for flow measurements in a rectangular channel and the results were compared with those acquired from numerical simulation.The time-averaged velocity profiles at the near-wake flow zones of boulders experience maximum flow retardation which is an outcome of the boulder-induced form roughness.The ratio of velocity differences associated to form and skin roughness and its positive magnitude reveals the dominance of form roughness closest to the boulders.Form roughness computed is 1.75 to 2 times higher than the skin roughness at the near-wake flow region.In particular,the collective immobile boulders placed at different inter-boulder spacings developed high and low bed shear stresses closest to the boulders.The low bed shear stresses characterised by a secondary peak developed at the trough location of the boulders is attributed to the skin shear stress.Further,the spatial averaging of time-averaged flow quantities gives additional impetus to present an improved illustration of fluid shear stresses.The formation of form-induced shear stress is estimated to be 17%to 23%of doubleaveraged Reynolds shear stress and partially compensates for the damping of time-averaged Reynolds shear stress in the interfacial sub-layer.The quadrant analysis of spatial velocity fluctuations depicts that the form-induced shear stresses are dominant in the interfacial sub-layer and have no significance above the gravel-bed surface.

Evolution of electrochemically induced stress and its effect on the lithium-storage performance of graphite electrode

The electrochemically induced stress is a key factor that affects the lithium-storage performance of electrode materials.In this study,the origin and evolution of the electrochemically induced stress of the graphite electrode were investigated by in situ experiments and simulations.An in situ optical experiment was performed to observe the electrode color to analyze the concentration and diffusion process of lithium ions inside the graphite electrode.An electrochemical-mechanical coupling model under the same experimental conditions was developed and verified by the experimental lithium concentration,and characterization of the spatiotemporal evolution of the potential,lithium concentration,and stress during the diffusion process was realized.The results showed that lithium intercalation leads to compressive stress,which presents a gradient distribution along the Li+diffusion path,and it exhibits a“piecewise”nonlinear growth trend with increasing lithiation time.In addition,as the potential decreases,the stress increases from slow to fast relative to the lithium-concentration increase,showing the characteristic of stages.The influence of stress on the lithium-storage performance is discussed using the local lithium-intercalation rate and phase-interface migration speed as the key parameters.The lithiation mechanism was analyzed from the perspective of the energy,and it was found that the two factors cause the slow diffusion in the late stage of lithiation,thus affecting the actual lithium-storage performance.This study will enhance the understanding of the electro-chemo-mechanical coupling mechanism and provide guidance for enhancing stress-regulated battery performance.

A Unified Momentum Equation Approach for Computing Flow-Induced Stresses in Structures with Arbitrarily-Shaped Stationary Boundaries

This article presents a novel monolithic numerical method for computing flow-induced stresses for problems involving arbitrarily-shaped stationary boundaries.A unified momentum equation for a continuum consisting of both fluids and solids is derived in terms of velocity by hybridizing the momentum equations of incompressible fluids and linear elastic solids.Discontinuities at the interface are smeared over a finite thickness around the interface using the signed distance function,and the resulting momentum equation implicitly takes care of the interfacial conditions without using a body-fitted grid.A finite volume approach is employed to discretize the obtained governing equations on a Cartesian grid.For validation purposes,this method has been applied to three examples,lid-driven cavity flow in a square cavity,lid-driven cavity flow in a circular cavity,and flow over a cylinder,where velocity and stress fields are simultaneously obtained for both fluids and structures.The simulation results agree well with the results found in the literature and the results obtained by COMSOL Multiphysicsr.

The conduction mechanism of stress induced leakage current through ultra-thin gate oxide under constant voltage stresses

The conduction mechanism of stress induced leakage current （SILC） through 2nm gate oxide is studied over a gate voltage range between 1.7V and stress voltage under constant voltage stress （CVS）. The simulation results show that the SILC is formed by trap-assisted tunnelling （TAT） process which is dominated by oxide traps induced by high field stresses. Their energy levels obtained by this work are approximately 1.9eV from the oxide conduction band, and the traps are believed to be the oxygen-related donor-like defects induced by high field stresses. The dependence of the trap density on stress time and oxide electric field is also investigated.

Superelastic behavior and stabilization of stress-induced martensite in Cu-13.4Al-4.0Ni single crystals

By applying tensile stress along 〈100〉 of β phase, the superelastic behavior and stabilization of stress induced martensite (SIM) of Cu 13.4Al 4.0Ni(mass fraction, %) single crystals were studied. The results show that the pseudo yield stress decreases with the increase of cycling number, and keeping load isothermally has an effect on stabilization of SIM. Previous thermal cycling between ( M s-20 ℃) and ( A f+20 ℃) promotes the superelasticity and the stabilization of SIM as well; the pre thermal cycling also reduces the pseudo yield stress. However, once the stabilization of SIM is produced, it can be destabilized by either the afterwards thermal cooling heating cycling or load and immediately unload cycling in ( A f～ M d). Isothermal treatment in ( A f～ M d) brings restabilization of SIM. The maximum superelastic value from β → β ′ 1(18 R ) is 9% for the studied single crystal. When test temperature is in A f～( A f+50 ℃) and stress is in 0～350 MPa, the superelastic behavior exist. [

Tensile Stress Induced Phase Transformations in Zn-Al Alloy

Both furnace cooled and as-cast eutectoid Zn-Al alloys were investigated under external tensile stress at 100℃. It was observed that the external tensile stress caused decomposition of two metastable phases η'T and η'S which derived from both original state of the alloy, and a phase transformation, αf +ε→T' +η， in both furnace cooled and as-cast eutectoid Zn-Al alloys. Also spheroidized structure formed partially during tensile testing. Superplasticity of the alloy has been discussed correlating with the phase transformations and microstructural changes.

Stress-induced deformation at A_p～M_p and thermal cycling behavior of Cu-Al-Ni single crystals

Stress induced deformation in A p～ M p and concomitant shape recovery behavior of Cu 13.4Al 4.0Ni single crystals were studied. Abnormal high stress induced deformation exists in A p～ M p under the conditions of either heating with load or cooling with load. The recovered deformation is successively composed of four parts, the recoveries from superelasticity, normal reverse transformation, thermally activated reverse transformation of partially stabilized martensite and reverse transformation of stabilized martensite by over heating. With increasing cycling number, the recovery part from normal reverse transformation decreases, while that from reverse transformation of stabilized martensite by over heating increases, which shows a typical stabilization of martensite.

BH3-only protein Bim is involved in myocardial injury induced by co-stress of ischemia and cold stress in rats

Objectives To investigate the effect of co-exposure of myocardial ischemia and cold stress on myocardial injury in rats and the relative mechanism.Methods Myocardial ischemia model was established by ligation of left coronary artery.SD rats were randomly allocated to 4 groups; sham+normal temperature(S group),sham+cold stress(SC group),myocardial ischemia+ normal temperature(Ⅰgroup), myocardial ischemia+cold stress(IC group).On the condition of 26℃,SC and IC groups were keeped in a 4℃artificial chamber for 8h(8;00-16:00) for 4 consecu- tive days.Car diac function was assessed by echocardiography;pathological change was analyzed by HE staining;myocardial infarct size was determined by TTC staining;Bim,Caspase-3 expression in myocardium was determined by western blotting.Results It was demonstrated that co-exposure of myocardial ischemia and cold stress could significantly make the cardiac muscle in abnormal shape,increase the infarct size and the expression of Bim and Caspase-3.Conclusions Co-exposure of myocardial ischemia and cold stress may aggravate the cardiac injury,pro- apoptosis protein Bim is involved.

Study on the degradation of NMOSFETs with ultra-thin gate oxide under channel hot electron stress at high temperature

This paper studies the degradation of device parameters and that of stress induced leakage current （SILC） of thin tunnel gate oxide under channel hot electron （CHE） stress at high temperature by using n-channel metal oxide semiconductor field effect transistors （NMOSFETs） with 1.4-nm gate oxides. The degradation of device parameters under CHE stress exhibits saturating time dependence at high temperature. The emphasis of this paper is on SILC of an ultra-thin-gate-oxide under CHE stress at high temperature. Based on the experimental results, it is found that there is a linear correlation between SILC degradation and Vh degradation in NMOSFETs during CHE stress. A model of the combined effect of oxide trapped negative charges and interface traps is developed to explain the origin of SILC during CHE stress.

Possibility of Inducing Compressive Residual Stresses in Welded Joints of SS400 Steels

Since the welded constructions produce easily stress corrosion cracking (SCC) or fatigue dis- ruption in corrosive medium or under ripple load, two methods inducing compressive stress on structural surfaces by anti-welding-heating treatment (AWHT) and explosion treatment (ET) are presented. The results show that they are good ways to resisting SCC on the welded 55400 steel or other components.

Puerarin antagonizes peroxyntrite-induced injury in retinal pigment epithelial cells

A rat model of diabetes mellitus was established by intraperitoneal injection of streptozotocin. Three days later, the rats were intraperitoneally administered 140 mg puerarin/kg daily, for a total of 60 successive days. DNA ladder results showed increased apoptosis over time in retinal pigment epithelial cells from rats with streptozotocin-induced diabetes mellitus. Western blot analysis, Reverse transcription-PCR, immunohistochemistry, and flow cytometry results showed increased expression of 3-nitrotyrosine, a peroxyntrite marker, as well as inducible nitric synthase and Fas/FasL, in retinal pigment epithelial cells. Puerarin reversed these changes, and results demonstrated that puerarin inhibited Fas/FasL expression and alleviated peroxyntrite injury to retinal pigment epithelial cells. These results suggested that puerarin inhibited production of inducible nitric oxide synthase and directly antagonized peroxyntrite injury in retinal pigment epithelial cells.

Effect of Crystallographic Orientation on Quenching Stress during Martensitic Phase Transformation of Carbon Steel Plate

During quenching, the residual stresses are affected by the crystallographic orientation of martensite, because the nonuniform thermal stresses affect the crystallographic orientation of the lathshaped martensite and induce the anisotropic expansion. To simulate this process, the model of anisotropic transformation induced plasticity（TRIP） was built using the WLR-BM phenomenological theory. The equivalent expansion coefficient was introduced considering the thermal and plastic strains, which simplified the numerical simulation. Furthermore, the quenching residual stresses in carbon steel plates were calculated using the finite element method under ANSYS Workbench simulation environment. To evaluate the simulative results, distributions of residual stresses from the surface to the interior at the center of specimen were measured using the layer-by-layer hole-drilling method. Compared to the measured results, the simulative results considering the anisotropic expansion induced by the crystallographic orientation of martenstic laths were found to be more accurate than those without considering it.

THEREVERSSE TRANSFOR MATION OF THE STERSS INDUCEDεMIN FE 17MN 10CR 5SI 4NIALLOY

Theconstruction changinginthereversetransformation ofthestress induced εMin Fe 17 Mn 10 Cr 5 Si 4 Ni alloy is carefully inspected in transmission electron microscope, and then stress induced εM procedure of reverse transformation is analyzed. The behavior of reverse transformationisdissimilar when the organization of εMis different. The reversetransfor mation ofεM withtheshapeofsingle plateandstripisrelativelyeasy,anditsreversibilityincrystallographiciseasilytocarryout,fortheεM with multilayerstructure,thereversetrans formationtakes placein isolatedlayers, fortheεMthat grows well,thereversetransforma tion isrelatively difficult becauseofthe ductile harmonization between itsinternalorganiza tion structures.

Exposure to a 2.5 GHz Non-ionizing Electromagnetic Field Alters Hematological Profiles, Biochemical Parameters, and Induces Oxidative Stress in Male Albino Rats

Modern technology has witnessed milestone achievements in the telecommunication industry.However,the widespread application of telecommunication technology is believed to heighten electromagnetic field(EMF)‘pollution’in our environment[1]and subject living organisms to various sources of electromagnetic emissions.These emissions include;microwaves.

INTERPHASE STRESS CORROSION CRACKING OF ALLOY Ti－24Al－11Nb IN METHANOL SOLUTION

For alloy Ti-24Al-11Nb,stress corrosion cracking(SCC) in methanol solution and hydrogen induced cracking(HIC) during dynamic charging at room temperature have been studied.Experiment has shown that the normalised threshold stress intensities of SCC failure for various microstructures are KISCC/KC =0.53 0.69 and the threshold value for SCC arresting KISCC/ KIC=0.61-0.79.The threshold values of HIC during dynamic charging are close to that of SCC,but da/dt or fracture time of HIC is one to three orders of magnitude smaller or longer than that of SCC,respectively.The.fracture surface for HIC is also different from that for SCC.For the Ti-24Al-Nb alloy-methanol systein,a kind of inierphase SCC has been found For the microstructures resulting from furnace cooling,SCC initiated and propagated preferentially along theα2/βinterphase boundaries,displaying the microstructure on the fracture surface of SCC.However,there is no interphase SCC for the microstructure resulting from air cooling.

Mechanical behaviors of deep pillar sandwiched between strong and weak layers

A variety of coal room and pillar mining methods have been efficiently practiced at depths of up to 500 m with least strata mechanics issues.However,for the first time,this method was trialled at depths of 850 e900 m in CSM mine of Czech Republic.The rhomboid-shaped coal pillars with acute corners of 70,surrounded with 5.2 m wide and 3.5e4.5 m high mine roadways,were used.Pillars were developed in a staggered manner with their size variation in the Panel II from 83 m×25 m to 24 m×20 m(corner to corner)and Panel V from 35 m×30 m to 26 m×16 m.Coal seam inclined at 12was affected by the unusual slippery slickenside roof bands and sometimes in the floor levels with high vertical stress below strong and massive sandstone roof.In order to ensure safety,pillars in both the panels were continuously monitored using various geotechnical instruments measuring the induced stresses,side spalling and roof sagging.Both panels suffered high amounts of mining induced stress and pillar failure with side-spalling up to 5 m from all sides.Heavy fracturing of coal pillar sides was controlled by fully encapsulated steel bolts.Mining induced stress kept increasing with the progress of development of pillars and galleries.Instruments installed in the pillar failed to monitor actual induced stress due to fracturing of coal mass around it which created an apprehension of pillar failure up to its core due to high vertical mining induced stress.This risk was reduced by carrying out scientific studies including the three-dimensional numerical models calibrated with data from the instrumented pillar.An attempt has been made to study the behavior of coal pillars and their yielding characteristics at deeper cover based on field and simulation results.

Screening-current-induced magnetic fields and strains in a compact REBCO coil in self field and background field

REBa_(2)Cu_(3)O_(7−x)(REBCO)coated conductors,owing to its high tensile strength and current‐carrying ability in a background field,are widely regarded a promising candidate in high‐field applications.Despite the great potentials,recent studies have highlighted the challenges posed by screening currents,which are featured by a highly nonuniform current distribution in the superconducting layer.In this paper,we report a comprehensive study on the behaviors of screening currents in a compact REBCO coil,specifically the screeningcurrent‐induced magnetic fields and strains.Experiments were carried out in the self‐generated magnetic field and a background field,respectively.In the self‐field condition,the full hysteresis of the magnetic field was obtained by applying current sweeps with repeatedly reversed polarity,as the nominal center field reached 9.17 T with a maximum peak current of 350 A.In a background field of 23.15 T,the insert coil generated a center field of 4.17 T with an applied current of 170 A.Ultimately,a total center field of 32.58 T was achieved before quench.Both the sequential model and the coupled model considering the perpendicular field modification due to conductor deformation are applied.The comparative study shows that,for this coil,the electromagnetic–mechanical coupling plays a trivial role in self‐field conditions up to 9 T.In contrast,with a high axial field dominated by the background field,the coupling effect has a stronger influence on the predicted current and strain distributions.Further discussions regarding the role of background field on the strains in the insert suggest potential design strategies to maximize the total center field.

Determination of safe mud window considering time-dependent variations of temperature and pore pressure:Analytical and numerical approaches

Wellbore stability is a key to have a successful drilling operation.Induced stresses are the main factors affecting wellbore instability and associated problems in drilling operations.These stresses are significantly impacted by pore pressure variation and thermal stresses in the field.In order to address wellbore instability problems,it is important to investigate the mechanisms of rockefluid interaction with respect to thermal and mechanical aspects.In order to understand the induced stresses,different mathematical models have been developed.In this study,the field equations governing the problem have been derived based on the thermo-poroelastic theory and solved analytically in Laplace domain.The results are transferred to time domain using Fourier inverse method.Finite difference method is also utilized to validate the results.Pore pressure and temperature distributions around the wellbore have been focused and simulated.Next,induced radial and tangential stresses for different cases of cooling and heating of formation are compared.In addition,the differences between thermo-poroelastic and poroelastic models in situation of permeable and impermeable wellbores are described.It is observed that cooling and pore pressure distribution reinforce the induced radial stress.Whereas cooling can be a tool to control and reduce tangential stress induced due to invasion of drilling fluid.In the next step,safe mud window is obtained using Mohr-Coulomb,Mogi-Coulomb,and modified Lade failure criteria for different inclinations.Temperature and pore pressure distributions do not change the minimum allowable wellbore pressure significantly.However,upper limit of mud window is sensitive to induced stresses and it seems vital to consider changes in temperature and pore pressure to avoid any failures.The widest and narrowest mud windows are proposed by modified Lade and Mohr-Coulomb failure criteria,respectively.

Fracture analyses of different pre-holed concrete specimens under compression

Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.