An Augmented Jacobian Method for Power Flow Analysis of Weakly Looped Distribution Systems with PV Buses

A power flow analysis method for weakly looped distribution systems with PV buses is proposed in this paper. The proposed method is computationally more efficient and more robust compared with the conventional compensation methods. The robustness is achieved by embedding the boundary conditions of loops and PV buses into the Jacobian matrix. The computational efficiency is achieved by the carefully designed factorization of Jacobian matrix. Test results on a 33 bus system are presented.

An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency, therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements. The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a global bus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided design of nanometer scale on-chip buses.

Effect of Distribution Generators on Stability in a Limited Bus Power Grid System

It has been recognized recently that when injecting renewable energy source power to a load bus which connected to a distributed feeder in a power grid system, a stability problem occurs particularly when having high fault duties that exceeding the circuit breaker ratings at some substations. In this paper an analysis of power flow, short circuit, stability and protection is given in detail to an example of limited 7-bus power grid system. Comparison is illustrated between power grid with and without distributed generators regarding bus voltages, fault currents, critical power angles, selected current transformers and over current relay settings in each bus.

REDUNDANCY TECHNOLOGY FOR AIRCRAFT MULTI-CHANNEL DC POWER SUPPLY SYSTEM

The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC BPCU） is put forward to manage the power supply system automatically. The redundancy innovation is also applied in both hardware and software of DC BPCU. Furthermore, redundancy fault diagnosis is discussed through the existing parts. Experiments and applications show that the proposed aircraft DC power supply system possesses many advantages of high reliability, high automation and so on.

Analysis of the Load Flow Problem in Power System Planning Studies

Load flow is an important tool used by power engineers for planning, to determine the best operation for a power system and exchange of power between utility companies. In order to have an efficient operating power system, it is necessary to determine which method is suitable and efficient for the system’s load flow analysis. A power flow analysis method may take a long time and therefore prevent achieving an accurate result to a power flow solution because of continuous changes in power demand and generations. This paper presents analysis of the load flow problem in power system planning studies. The numerical methods: Gauss-Seidel, Newton-Raphson and Fast Decoupled methods were compared for a power flow analysis solution. Simulation is carried out using Matlab for test cases of IEEE 9-Bus, IEEE 30-Bus and IEEE 57-Bus system. The simulation results were compared for number of iteration, computational time, tolerance value and convergence. The compared results show that Newton-Raphson is the most reliable method because it has the least number of iteration and converges faster.

An Advanced FMRL Controller for FACTS Devices to Enhance Dynamic Performance of Power Systems

The parameters of power system slowly change with time due to environmental effects or may change rapidly due to faults. It is preferable that the control technique in this system possesses robustness for various fault conditions and disturbances. The used flexible alternating current transmission system （FACTS） in this paper is an advanced super-conducting magnetic energy storage （ASMES）. Many control techniques that use ASMES to improve power system stability have been proposed. While fuzzy controller has proven its value in some applications, the researches applying fuzzy controller with ASMES have been actively reported. However, it is sometimes very difficult to specify the rule base for some plants, when the parameters change. To solve this problem, a fuzzy model reference learning controller （FMRLC） is proposed in this paper, which investigates multi-input multi-output FMRLC for time-variant nonlinear system. This control method provides the motivation for adaptive fuzzy control, where the focus is on the automatic online synthesis and tuning of fuzzy controller parameters （i.e., using online data to continually learn the fuzzy controller that will ensure that the performance objectives are met）. Simulation results show that the proposed robust controller is able to work with nonlinear and nonstationary power system （i.e., single machine-infinite bus （SMIB） system）, under various fault conditions and disturbances.

Study on twin-wire pulsed MIG welding power supply based on DSP and CAN

A design proposal for twin-wire pulsed MIG welding power supply based on DSP （ digital signal processor） and CAN （ controller area network ） is put forward. By ase of the CAN bus, the synergic control between the master and slave power supplies can be realized. And in this way, their peak currents can be guaranteed to be alternative and the interference between the two arcs can be decreased efficiently. The hardware design, software design and relative tests are provided in this paper. Tests show that the power supply can meet the design requirements of twin-wire welding.

Modified Satin Bowerbird for Distributed Generation in Remotely Controlled Voltage Bus

The distributed generators in the radial distribution network are to improve the Grid performance and its efficiency.These Distributed Generators control the PV bus;it is converted as a remote controlled PVQ bus.This PVQ bus reduces the power loss and reactive power.Initially,the distributed generators were placed in the system using mathematical modelling or the optimization.This approach improves the efficiency but it has no effect in loss minimization.To minimize the loss the reconfigured network with Genetic algorithm based Distributed generator placement proposed as existing work.This approach minimizes the loss effectively;but the genetic algorithm takes more time for DG placement.Hence,in this,the network reconfiguration is performed using a modified Satin bower bird algorithm after DG placement and DG sizing.Initially,the sensitive analysis applied the loadflow analysis to identify the optimal placement for the distributed generator.Then,the modified Satin Bowerbird(SBO)used for the network reconfiguration.This approach minimizes the loss of effectively by combining the network reconfiguration process.The proposed modified SBO-based network reconfiguration implemented on standard bus systems 33 and 69 using MATLAB R2021b version under Windows 10 environment.The proposed approach compared with the existing work in terms of real power loss and loss reduction.

Design and Power Flow Analysis of Electrical System Using Electrical Transient and Program Software

Power flow analysis is a numerical way of study of behavior of flow of electric power in an interconnected system. In order to meet the growing demands of electrical energy in an optimum way, there is a need to upgrade existing systems or to install new systems. Therefore, planning of new installations and determination of best operating conditions of existing systems need power flow analysis. In this way, cost/benefit ratio for both suppliers and customers is maintained. This research involves the design and power flow analysis of IEEE-14 bus system. Newton Raphson method is applied for better efficiency and reduced computational time. Simulation analysis is conducted in ETAP software because of its excessive used in real life systems.

Investigation and Simulation of CNG Bus Emissions Based on Real-World Emission Measurement

The regulated gaseous emissions from 2 China-V compressed natural gas(CNG)buses and 2 China-V diesel buses were investigated using a portable emissions measurement system(PEMS)under real road driving conditions.Compared to diesel buses,CNG buses emit less NOx pollutants,but more HC and CO pollutants based on the test results obtained in this paper.In order to evaluate the pollutant emission status of CNG buses in Beijing,an instantaneous emission model as a function of vehicle speed and vehicle specific power(VSP)was developed and validated based on emission data taken from one CNG bus.The input of the instantaneous emission model consists of driving cycle,vehicle parameters,road conditions,ambient conditions and accessory use,all of which were used to calculate the instantaneous vehicle specific power(VSP).For the core model,a group of pollutant emission maps represented as functions of vehicle speed and VSP were used to calculate the second by second emission rates.Finally,the instantaneous emission rates,emission factors and fuel consumption over the selected driving cycle could be obtained as the model outputs.The predicted results for the emissions and fuel consumption of the CNG bus were very close to the tested emission data.The prediction errors for emission factors and fuel consumption varied in the range of-1.6 2%to-5.8%.

PSS and SVC Controller Design using Chaos, PSO and SFL Algorithms to Enhancing the Power System Stability

In this paper, the Authors present the designing of power system stabilizer (PSS) and static var compensator (SVC) based on chaos, particle swarm optimization (PSO) and shuffled frog leaping (SFL) Algorithms has been presented to improve the power system stability. Single machine infinite bus (SMIB) system with SVC located at the terminal of generator has been considered to evaluate the proposed SVC and PSS controllers. The coefficients of PSS and SVC controller have been optimized by Chaos, PSO and SFL algorithms. Fi-nally the system with proposed controllers is simulated for the special disturbance in input power of genera-tor, and then the dynamic responses of generator have been presented. The simulation results show that the system composed with recommended controller has outstanding operation in fast damping of oscillations of power system and describes an application of Chaos, PSO and SFL algorithms to the problem of designing a Lead-Lag controller used in PSS and SVC in power system.

基于TMS320F2812的交流汇流条功率控制器的设计

摘要:以TI公司的DSP芯片TMS320F2812为核心处理器,设计了交流汇流条功率控制器(ACBPCU)。软件平台采用嵌入式实时操作系统DSP/BIOS,有效提高了先进飞机电气系统的可靠性和实时性,并详细介绍了系统硬件电路的设计和软件实现。

Direct Torque Control Strategy of an Induction-Machine-Based Flywheel Energy Storage System Associated to a Variable-Speed Wind Generator

The flywheel energy storage systems (FESSs) are suitable for improving the quality of the electric power delivered by the wind generators and for helping these generators to contribute to the ancillary services. Presently, FESSs containing a flux-oriented controlled (FOC) induction machine (IM) are mainly considered for this kind of application. This paper proposes the direct torque control (DTC) for an IM-based FESS associated to a variable speed wind generator (VSWG), and proves through simulation results that it could be a better alternative.

Control Strategy of DC Link Voltage Flywheel Energy Storage for Non Grid Connected Wind Turbines Based on Fuzzy Control

The large-scale development of wind power is an important means to reduce greenhouse gas emissions, alleviate environmental pollution and improve the utilization rate of renewable energy. At the same time, large-scale non grid connected wind power generation theory avoids the technical difficulties of wind power integration [1]. However, due to the randomness and uncontrollability of wind energy, the output power of the wind power generation system will fluctuate accordingly [2]. Therefore, the corresponding energy storage devices are arranged in the non-grid-connected wind power generation system to ensure the power quality, and it has become the key to full utilization of renewable energy. In the case of wind speed fluctuation, the DC bus control strategy of the wind turbine is proposed in this paper. It can reduce the impact on the unit converter and the power load;this ensures safe and stable operation of non-grid connected wind turbines.

A multi-modular shunt active power filter system and its novel fault-tolerant strategy based on split-phase control and real-time bus communication

We first present a new multi-modular shunt active power filter system suitable for large-capacity compensation. Each module in the system has the same circuit topology, system functionality, and controller design, to achieve coordination control among the modules. The module＇s reference signals are obtained by multiplying the total reference signal by the respective distribution coefficient. Next, a novel fault-tolerant approach is proposed based on split-phase control in the a-b-c frame and real-time bus communication. When a phase fault occurs, instead of halting the whole module, the proposed strategy isolates only the faulted bridge arm, and then recalculates the distribution coefficients and transfers the compensation capacity to the same phases of the other normal modules, resulting in a continuous operation of the faulted module and optimization of the remaining usable power devices. Through steady-state analysis of the post-fault circuit, the system stability and control reliability are proven to be high enough to guarantee its engineering application value. Finally, a prototype is established and experimental results show the validity and feasibility of the proposed multi-modular system and its fault-tolerant control strategy.

Reducing input/output current ripple for driving converter by multiple technology

To improve the vehicle dynamic performance and ultra-capacitor operating circumstance,this paper studied the multi-current-two-quadrant converter applied to drive high power DC motor in ultra-capacitor electric bus(UCEB).Compared with normal current-two-quadrant converter,the multi-current-two-quadrant converter can reduce the motor armature current ripple and the ultra-capacitor current ripple.Moreover,it improves power capabilities,reliability and fault tolerant capability of driving system.After analyzing the structure and working principle of the multi-current-two-quadrant converter,the expressions of armature current ripple and the quantitative relationships between the ultra-capacitor power loss and duty cycle were derived.The simulation and experimental results showed that the multi-current-two-quadrant converter has great advantages in reducing the armature current ripple and ultra-capacitor power loss,which can improve the vehicle performance and overall efficiency.

SMO Algorithm to Unravel CEED Problem using Wind and Solar

This research proposes a more advanced way to address Combined Economic Emission Dispatch(CEED)concerns.Economic Load Dispatch(ELD)and Economic Emission Dispatch(EED)have been implemented to reduce generating unit fuel costs and emissions.When both economics and emission tar-gets are taken into account,the dispatch of an aggregate cost-effective emission challenge emerges.This research affords a mathematical modeling-based analyti-cal technique for solving economic,emission,and collaborative economic and emission dispatch problems with only one goal.This study takes into account both the fuel cost target and the environmental impact of emissions.This bi-inten-tion CEED problem is converted to a solitary goal function using a price penalty factor technique.In this case,a metaheuristic and an environment-inspired,intel-ligent Spider Monkey Optimization technique(SMO)are used to address the CEED dilemma.By following the generator’s scheduling process,the SMO meth-od is used to regulate the output from the power generation system in terms of pollution and fuel cost.The Fission-Fusion social(FFS)structure of spider mon-keys promotes them to utilize a global optimization method known as SMO dur-ing foraging behaviour.The emphasis is mostly on lowering the cost of generation and pollution in order to improve the efficiency of the power system and han-dle dispatch problems with constraints.The economic dispatch has been reme-died,and the improved result demonstrates that the system’s performance is stable andflexible in real time.Finally,the system’s output demonstrates that the system has improved in resolving CEED difficulties.When compared to ear-lier investigations,the proposed model’sfindings have improved.As the gener-ating units,wind and solar are used to explore the CEED crisis in the IEEE 30 bus system.

Analysis of Commutation Failure in Multi-Infeed HVDC System under Different Load Models

HVDC technology has been widely used in modern power system. On one hand, HVDC has the advantages of economy, high efficiency and strong controllability. While on the other hand, it makes the dynamic characteristics of the power system becoming more and more complex. That puts forward a new challenge to system stability and raises new questions for power system simulation. This paper focuses on the interaction between AC and DC systems, especially the problem of commutation failure caused by AC system fault. Based on the data of China Southern Power Grid, this paper calculates the fault regions that may cause commutation failure and calculates the system critical clearance time under different load models, analyzes the impacts of different load models on commutation failure and the stability of AC/DC hybrid system.

Power Flow Model for Medium-voltage Distribution Systems Considering Measurement and Structure Characteristics

Medium-voltage distribution systems(MVDSs)mainly consist of a feeder head,lines,distribution transformers,and the equivalent load or power supply interfaced with the distribution transformers.The information of such load or power supply can be measured via the three-wattmeter method(THM)and the two-wattmeter method(TWM).The measurements can be used to perform the control of the power supply and simulate the characteristics of the load,so the models of the load and the power supply need to consider the measurement characteristics.Existing research works on three-phase power flow(PF)just consider the measurement characteristics of THM.Hence,the PF equation of the bus measured via TWM is firstly built.Based on conventional measurements,an accurate and general model of the grounded and ungrounded slack bus is proposed.Furthermore,the influence arising from the connection type and angle shift of distribution transformers on the admittance matrix is considered,and thus a general three-phase transformer model is summarized,which is applicable for all the transformers mentioned herein.Finally,Newton's method is adopted to solve the PF calculation,and the performance of the proposed PF model is demonstrated through designed tests.