Physicochemical Characterisation for Potential Uses as Industrial Mineral of Bauxite from Débélé, Guinea

Assessing the potential uses as industrial mineral, bauxite from Débélé, Guinea, has been characterised by chemical and mineralogical analyses, the determination of the amorphous content, the rate of portlandite consumption in an aqueous solution, the strength activity index, and the thermal behaviour up to 1200°C. It was evidenced that the raw sample is gibbsite-rich type bauxite with about 45.06 wt% of alumina, 23.80 wt% of iron oxide, and 1.74 wt% of silica. It meets the chemical composition required for bauxites used for refractory cement. During heating, the raw bauxite undergoes high densification with low linear shrinkage, motivating a potential use in dense ceramic compositions with high thermal stability. Also, the heating at only 600°C gives a significant pozzolanic activity in combination with Portland cement. The correlation between the pozzolanicity, the amorphous phase content, and the specific surface area indicated that the raw and the calcined materials present an interesting reactivity for using them in alternative cement formulations.

Characterization and application of tourmaline and beryl from Brazilian pegmatite in adsorption process with divalent metals

In this study,the original tourmaline and beryl mineral samples have been collected from a Brazilian pegmatite.The objective of this study was to examine the adsorption behavior of Brazilian ciclosilicate samples,towards divalent metals(Pb 2+,Mn 2+,and Zn 2+) in ethanol solution has been studies by a batch technique.The ciclosilicate samples were characterized by elemental analysis,Fourier transform infrared spectroscopy,helium picnometry,mercury porosity,and nitrogen adsorption-desorption.The Langmuir expression for adsorption isotherm was applied in order to determine the adsorption capacity to form a monolayer and the constant related to the adsorption intensity.In aqueous solution there was a significant adsorption increase with the temperature and pronounced synergistic effects were observed.The maximum number of moles adsorbed was determined to be 12.48 and 11.49 mmol/g for systems Pb 2+ /beryl and Pb 2+ /tourmaline,respectively.The energetic effects caused by metal cations adsorption were determined through calorimetric titrations.Thermodynamics indicated the existence of favorable conditions for such Pb 2+-,Mn 2+-,and Zn 2+-OH interactions.

Chinese Mining toward Sustainable Development in a Global Perspective

In view of sustainable development, this paper presents the challenges faced by the global mining sectors, outlines an integrated approach of the global minerals industry for sustainable development, introduces actions for the mineral professionals toward sustainable development, and proposes changes in the mineral operations, management, and governance practices in the Chinese perspective.

Valency Study of Vanadium in Stone Coal of Southern China

Vanadium - bearing stone coal is a new resource of vanadium. V in stone coal mainly exists in three oxidation states: 7.84% V(III), 72.08% V(IV) and 20.08% V(V). The change and distribution of valency during oxidizing roasting shows that organic matter in the coal determines the valency at low temperatures. At about 450°C, V(III) is completely oxidized to V(IV); above 500°C, temperature is the most important factor for the oxidation of V. At 700-1000°C, 92% of V in the coal has been oxidized to V(V). At higher temperature, no more oxidation of V takes place, equilibrium being established. The role of NaCl in the recovery of V2O5 from the coal is discussed. The best conditions for roasting are an oxidation-chlorination atmosphere, temperature 800°C for 30 minutes, ore:NaCl = 100:10, ηroast reaching 90%.

A landfill based approach to surface mine design

Surface mining operations extract a large quantity of waste material,which is generally disposed into a dump area.This waste can cause a series of environmental problems ranging from landscape deterioration to acidic water generation and water pollution.Therefore,mine waste management is a significant task in mining operations.As known,in strip mining,the overburden is not transported to waste dumps but disposed directly into adjacent strip which was mined out.This concept can be adapted for mine planning of relatively horizontal deposits through a mixed integer programming(MIP)model.The main idea behind this work is that,in one pit,production voids created in early year of mining are used for waste landfilling in late years of production.In other words,in addition to external dumping,a landfilling option within the same pit is proposed for mine design optimization.The problem is formulated as maximization of the net present value(NPV)of the mining project under the constraints of access,landfill waste handling,mining and processing capacities.A case study using a data set was carried out to see the performance of the proposed approach.The findings showed that this approach could be used in waste management incorporating a landfilling option into mine planning.As a result,material handling costs decrease,and environmental compliance increases due to less external waste quantity.

Magnetic separation studies on ferruginous chromite fine to enhance Cr:Fe ratio

The Cr：Fe ratio （chromium-to-iron mass ratio） of chromite affects the production of chrome-based ferroalloys. Although the lit- erature contains numerous reports related to the magnetic separation of different minerals, limited work concerning the application of mag- netic separation to fine chromite from the Sukinda region of India to enhance its Cr：Fe ratio has been reported. In the present investigation, magnetic separation and mineralogical characterization studies of chromite fines were conducted to enhance the Cr：Fe ratio. Characterization studies included particle size and chemical analyses, X-ray diffraction analysis, automated mineral analysis, sink-and-float studies, and mag- netic susceptibility measurements, whereas magnetic separation was investigated using a rare earth drum magnetic separator, a rare earth roll magnetic separator, an induced roll magnetic separator, and a wet high-intensity magnetic separator. The fine chromite was observed to be upgraded to a Cr：Fe ratio of 2.2 with a yield of 55.7% through the use of an induced roll magnetic separator and a feed material with a Cr：Fe ratio of 1.6.

Province-scale commonalities of some world-class gold deposits:Implications for mineral exploration

Discovery rates for all metals, including gold, are declining, the cost per significant discovery is increasing sharply, and the economic situation of the industry is one of low base rate. The current hierarchical structure of the exploration and mining industry makes this situation difficult to redress. Economic geologists can do little to influence the required changes to the overall structure and philosophy of an industry driven by business rather than geological principles, However, it should be possible to follow the lead of the oil industry and improve the success rate of greenfield exploration, necessary for the next group of lower-exploration-spend significant mineral deposit discoveries. Here we promote the concept that mineral explorers need to carefully consider the scale at which their exploration targets are viewed. It is necessary to carefully assess the potential of drill targets in terms of terrane to province to district scale, rather than deposit scale, where most current economic geology research and conceptual thinking is concentrated. If orogenic, IRGD, Carlin-style and IOCG gold-rich systems are viewed at the deposit scale, they appear quite different in terms of conventionally adop- ted research parameters. However, recent models for these deposit styles show increasingly similar source-region parameters when viewed at the lithosphere scale, suggesting common tectonic settings. It is only by assessing individual targets in their tectonic context that they can be more reliably ranked in terms of potential to provide a significant drill discovery. Targets adjacent to craton margins, other lithosphere boundaries, and suture zones are clearly favoured for all of these gold deposit styles, and such exploration could lead to incidental discovery of major deposits of other metals sited along the same tectonic boundaries.

DEVELOPING OF TRANS-CENTURY MINING SUBJECT WITH NEW TECHNOLOGY AND NEW THEORY

Mining subject needs further development and towards which the development would bebeing the problems concerned over all along and to be succeded with the public good enough attention to discussions to reacb an identny of vicws admittedly. The emcrgcnce in succession of newand-hish techs in the mid-and late twentieth century is perhaps tbe most fascinating and epochmarking event that bas given to an the subjects certain but different degrees of Anpacts to becomemore closely interretative and interdepartmentai each other and fcature specifically from that of thepast for their entirely new conceptions in the result of formutating many new theories, new technologies and new subjects that mining subject is inevitably and unexceptionally the one inclusive.The author gives in this paper his opinion regardjng the problern of tbe deve1opmcnt of mining subject proving with many convincible facts and most in formative new ideas.

Industrial mineral powder production in China

The recent annual output of major industrial mineral powders in the mainland of China has been more than 100 million t, accompanied by active development of such supporting technology as comminution, classification, separation/purification, and surface modification. In particular, the present paper reviews technologies for preparing ultra-fine particles involving dry and wet processing, modification and composition, calcination of kaolin clay, and processing of spherical/acerous industrial minerals.

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride （PAFSiC） coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride （PAC）. The PAFSiC coagulant was prepared by co-polymerization. The effects of （Al＋Fe）/Si molar ratio, OH/（Al＋Fe） molar ratio （i.e., γ value）, coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand （COD）, and total phosphate （TP）. The PAFSiC with a γ value of 2.0 and （Al＋Fe）/Si ratio of 5 （PAFSiC 2.0/5） showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC （6.0–8.0）. The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.