Turkey’s automotive industry has begun to occur at a much earlier date compared to other developing countries,through licensing agreements to establish automotive industrial facilities,by importing a kind of technolo...Turkey’s automotive industry has begun to occur at a much earlier date compared to other developing countries,through licensing agreements to establish automotive industrial facilities,by importing a kind of technology.Attempts have been made in order to produce the domestic automobile road providing sectoral developments could enter another technology pathway.Moreover,the inventor of a very early date in the Fordist production system,such as 1929 by Ford Motor Company with the license agreement,as if he could provide for setting up production facilities in Istanbul’s company,this bad experience has refrained for years from entering as a manufacturer Ford Motor Turkey market.Thus,while Turkey is an attractive market for car production,on the other hand,sufficient improvement over time in the production of trucks and other automotive products,such as buses has not been achieved.The 1929 experience seems to have been effective in terms of Turkey.Because,it was necessary to wait until 1971 for OYAK and TOFAŞto establish automobile assembly facility with license agreements.With the start of production of two automotive industry facilities,there has been a significant increase in sectoral production figures,but this increase trend has not been sufficiently supported by the government through the incentive system and in the late 1970s the production of the automotive industry has declined.For the first time in 1961,efforts were made to produce a completely domestic automobile,although the prototype of the revolutionary car was successfully produced,mass production could not be started.Subsequently,the production of the Anadol automobile for the second time was tried by means of technology transfer from multiple sources and the serial production of this automobile continued for a while.However,since fiber glass bodywork was used instead of hair bodywork and export opportunities could not be found,production was stopped completely in the end of 1980s.In the 1980s,automobile production continued in two assembly plants and product diversification was carried out to increase the production volume.In the 1990s,three new assembly facilities,Honda,Toyota and Hyundai,were established and the number of assembly production facilities in the country increased to five and technology loyalty based on technology imports continued.Until 2014,the automotive industry continued to consist of five automobile assembly plants and other automotive products assembly plants.In 2015,it was announced to the public that a new domestic car prototype was produced.It was announced that the project will start mass production in 2019.However,it was determined that the prototype would be re-manufactured at the end of 2019 by making changes in the project and that it would be possible to start mass production in 2022.Thus,it is understood that the efforts to start mass production since 2015 can be concluded in 2022,i.e.7 years after the first prototype was produced.It can 161produce prototypes in a short period of four months in Turkey in 1961,as evidenced by an indication of the dependency on a long time wasting which is not technology importation pathway,such as five years.How to break the path of devotion demonstrates that it is a difficult job.Path dependency is thought to result from the education system.展开更多
This study aims at exploring the technical efficiency of lum- ber industry in northwestern Ontario, Canada using data envelopment analysis (DEA). The DEA model analyzes relative technical efficiency of lumber mills ...This study aims at exploring the technical efficiency of lum- ber industry in northwestern Ontario, Canada using data envelopment analysis (DEA). The DEA model analyzes relative technical efficiency of lumber mills with disproportionate inputs and outputs by dividing the 10- year time series data, for inputs and outputs of 24 lumber mills, over two periods (1999-2003 and 2004-2008). Four inputs, namely, material (log volume), labour (man-hours), two types of energy (hog-fuel and electric- ity), and one output (lumber volume) are used in this study. The trend analysis shows an annual reduction of 10%, 13% and 13% for lumber output, log consumption (input) and number of employees, respectively, during the period 1999-2008. The results from DEA with two scenarios with energy inputs and without energy inputs, for the two periods are found to be mixed and interesting. While some mills have improved their performance in terms of best use of available scarce inputs in the second period, some have shown negative per cent change in efficiency. In the with energy input and the without energy input scenario, some of the mills show a reduction in efficiency in the second period from the first period, with the highest estimated reductions of-13.9% and -47.6%, respectively. A possible explanation for these negative performances of mills in the latter period is the decline in production in the second period compared to the first period, where these mills were not able to adjust their inputs (mostly labour) as proportional lay-offs might not have been possible. These results provide policy makers and industry stakeholders with an improved understanding of the trends of efficiency and employ- ment as well as reallocation opportunities of future inputs in order to increase benefits from this sector.展开更多
The SCP framework is a classical theory of industrial organization,which refers to the market structure,market conduct and market performance.This analysis is based on the SCP framework,choosing the current sporting p...The SCP framework is a classical theory of industrial organization,which refers to the market structure,market conduct and market performance.This analysis is based on the SCP framework,choosing the current sporting products industry as object.Study found that China's sporting products industry's geographical layout has a"strong in South and East,weak in North and West"regional development trend,the proportion of abovedesignated enterprises is relatively low,rate of market concentration is not high,product homogenization remain quite serious.With high-speed technological progress and rapid scientific and technological updates,in the future,the sporting products industry will be reorganized according to the subdivision industries,getting rid of homogenization of competition and meeting the needs of consumers in smart wearable,health monitoring and other aspects.展开更多
It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strat...It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strategies can be accepted or corrections implemented since a plan also outlines some strategies for achieving the targets set. In this study, achievements in production and export of industrial forest products, i.e., sawn wood, plywood, chipboard and fibreboard, paper and paperboard and industrial round wood, are compared against targeted figures for 1996 for Tanzania. Discrepancies were obtained by subtracting targeted from achieved values and expressed both as absolute and relative differences in terms of the targeted values, with a negative sign for pro- duction where achievements were less than targets and a positive sign when achievements were higher than targets. Values achieved ranged from 4%-100% of the targeted values, depending on the product, and were only higher than the targeted value for industrial round wood. Possible causes of the discrepancies are inefficiency of parastatal companies, low private investment, sub-maximal in- dustrial operation and plant inefficiencies. Discrepancies could also result from unrealistic data used in planning due to difficulty in data availability and poor intra- and inter-sectoral coordination. The implications of these discrepancies are low contributions of the wood-based industry to the national economy, increased import substitution of wood-based products, increased socio-economic and environmental degradation and decreased integrity in planning and policy making.展开更多
The food industry has developed into a leading industry in Northeast China.However,various economic indicators have shown a significant downward trend in recent years.Through the systematic analysis of the development...The food industry has developed into a leading industry in Northeast China.However,various economic indicators have shown a significant downward trend in recent years.Through the systematic analysis of the development trend of food industry in Northeast China in the past ten years,especially in 2014,it is found that in the context of stable and smooth operation of the food industry in China,the efficiency of the main processing industries declines in the three northeastern provinces of China,there is a simultaneous decline in the share of output value of the leading industries in the output value of manufacturing sector in three provinces,the collective and individual capital withdrawal is obvious in the paid-up capital,and there is a simultaneous decline in the industrial production and sales rate and the export delivery value.The food industry in Northeast China has plunged into the dilemma of development.Finally,this article puts forward some targeted recommendations from aspects of policy making,industrial agglomeration and enterprise cultivation.展开更多
The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagne...The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagnetic noise generated during a plasma discharge. The main parameters characterizing the quality for super-pure water, tap water and water from the intake in Besko (Poland) before and after the process in the plasma reactor were presented for comparison. In addition, the <sup>17</sup>O NMR (the full width at half maximum) and electrospray ionization mass spectrometry (ESI MS) methods were used to determine differences in physicochemical parameters between the untreated and plasma-treated water. It has been established that the water subjected to plasma treatment shows much different gas absorption properties than the untreated water samples, as a function of temperature and pressure, in this paper we report exemplary data for CO<sub>2</sub>, oxygen and acetylene. The improved gas absorption properties of the plasma-treated water make it attractive for the use in industrial processes. It is worth pointing to a great capacity of the new reactor (4000 l/h), and low energy consumption (20 MJ/h) for the treatment of the above mentioned volume flow rate of water.展开更多
China is the world’s largest consumer market for eyeglasses,with the total market volume reaching 80billion yuan.Accordingly,the market has a group of 800 million consumers demanding eyeglasses.The consumers are from...China is the world’s largest consumer market for eyeglasses,with the total market volume reaching 80billion yuan.Accordingly,the market has a group of 800 million consumers demanding eyeglasses.The consumers are from different ages。展开更多
The Liaoning Light Industrial Products Import and Export Corporation founded in 1954 is the first legally recognized enterprise established in Northeast China. Liaoning province is the show place and gateway to North ...The Liaoning Light Industrial Products Import and Export Corporation founded in 1954 is the first legally recognized enterprise established in Northeast China. Liaoning province is the show place and gateway to North east China, and a bridge between Asia and Europe. The geographic location and the natural environment of the region with展开更多
Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production ...Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production by liquid fermentation in cylinder were studied. On the basis of single factor test,an orthogonal test was carried out to find optimal conditions for laccase production P. chrysosporium through liquid fermentation. These results showed that the stirring speed of fermentation cylinder had the highest effect on laccase production,and the optimal conditions were shown as follows: the temperature at 28 ℃,the rotating speed at 300 r/min,the ventilation volume of 5 L/min( ventilation ratio of 1.0 vvm),the initial p H of medium of 5,and the inoculation amount of 15%,which gave the highest laccase level of 14. 86 U/ml.展开更多
Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of persona...Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.展开更多
The industrial energy diagnosis presented in this work occurred in a milk product cooperative, from an analysis of energy consumption in the main milk industrialization and a diagnosis of energy end uses of lighting a...The industrial energy diagnosis presented in this work occurred in a milk product cooperative, from an analysis of energy consumption in the main milk industrialization and a diagnosis of energy end uses of lighting and cooling systems. Almost all stages of milk industrialization are used hot water and steam generated in the boilers. The largest electricity consumption in this sector is by electric motors followed by cooling needed to maintain the quality of milk products. Because energy costs represent a significant portion of the monthly cost of the company, an analysis of the energy costs of the past two years to check the consumption of active and reactive energy and power demand contracted is performed. This paper presents the main results of an energy audit in a milk processing industry in southern Brazil.展开更多
As a kind of integrated economy,digital economy has an important impact on the economic growth and production and lifestyle of multiple countries and regions,and plays a significant role in promoting the reconstructio...As a kind of integrated economy,digital economy has an important impact on the economic growth and production and lifestyle of multiple countries and regions,and plays a significant role in promoting the reconstruction of the international economic pattern.As an important industry of China’s national economy,the service industry is crucial to China’s economic growth.This paper measures the development level of digital economy in provinces and cities through constructing digital economy index system,uses super efficiency SBM-Malmquist model to measure total factor productivity of service industry,and tests the influence effect of digital economy on total factor productivity of Chinese service industry.Finally,the optimization path of digital economy on China’s service industry is proposed.展开更多
This paper uses an input-output table of China's provinces(2007-2016) to measure carbon emissions of these industries.It employs a Malmquist-Luenberger(ML) index with expected and undesired outputs,and an absolute...This paper uses an input-output table of China's provinces(2007-2016) to measure carbon emissions of these industries.It employs a Malmquist-Luenberger(ML) index with expected and undesired outputs,and an absolute β convergence and a conditional β convergence model,to conduct an in-depth analysis of dynamic changes and spatial convergence.Carbon emission efficiency of forest processing industries in 25 regions,including Shanghai,Chongqing,Zhejiang,and Jiangsu are increasing,whereas those of Tianjin,Liaoning,Heilongjiang,and Tibet are decreasing.The main contributing factors of carbon emission efficiency in three major regions vary over time.Further,carbon emission efficiency in the eastern,central,and western regions all have absolute β convergence and conditional β convergence,indicating that different regions are developing toward their own goals and industry,yet regions with lower efficiency are catching up with those where with more efficient strategies in place.Finally,this paper proposes according recommendations.展开更多
The National High-tech Zone(NHTZs)is an important strategic platform for cultivating high-tech industries and realizing high-quality economic development in China.Based on the combined data from 2006 to 2014 of the in...The National High-tech Zone(NHTZs)is an important strategic platform for cultivating high-tech industries and realizing high-quality economic development in China.Based on the combined data from 2006 to 2014 of the industrial enterprise database,the customs database,and the China Development Zones Audit and Announcement Catalogue(abbreviated asthe Catalogue),this paper systematically investigates the influence of the construction of NHTZs on enterprise’s total factor productivity(TFP).Results show that NHTZs have a positive impact on the TFP of enterprises in the zone,and this conclusion is still valid after considering endogeneity problems.Furthermore,the above productivity effects of NHTZs are heterogeneous in terms of enterprise ownership,external environment and establishment time,and NHTZs have greater stimulation effects on enterprise productivity after comparing with other types of functional zones.An investigation of the specific mechanisms at play shows that NHTZs promote the TFP of enterprises in the zone through the release of preferential policies,strengthening the“technology spillover effects”of imported intermediate goods,enhancing enterprise’s innovation ability and attracting talent.In addition,based on the decomposition of industry productivity,this paper also investigates the impact of NHTZs on changes in industry productivity and finds that NHTZs promote the overall productivity of specific industries mainly by stimulating the productivity improvement of incumbent enterprises and expanding the market share of high-productivity enterprises.Moreover,the preferential policies of NHTZs do not significantly stimulate high-productivity enterprises to enter the zones,nor do they cause low-productivity enterprises to exit.This research is helpful in objectively evaluating the economic effects of the NHTZs in China and in providing a theoretical basis for its further adjustment.展开更多
The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing provi...The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing province-level panel data spanning from 2004 to 2020.Furthermore,we examine the influence of green finance and technological progress on industrial green total factor productivity using a spatial econometric model.The findings uncover that the relationship between the level of green financial development and industrial green total factor productivity follows a U-shaped curve.Initially,low levels of green financial development exert a suppressive effect on industrial green total factor productivity,proving ineffective in the short term.However,with the progression of green finance development,a positive and significant long-term impact on industrial green total factor productivity emerges.Moreover,technological progress demonstrates a noteworthy promotional effect on industrial green total factor productivity.The analysis delves deeper into revealing that industrial structure and environmental regulation intensity exhibit a significant negative relationship with industrial green total factor productivity.In contrast,both energy structure and education level showcase a substantial positive relationship with industrial green total factor productivity.展开更多
A series of environmental and energy issues,such as global warming,water pollution,acid rain,and energy shortage,have to be settled urgently.Metal-organic frameworks(MOFs)are compounds consisting of metal ions or clus...A series of environmental and energy issues,such as global warming,water pollution,acid rain,and energy shortage,have to be settled urgently.Metal-organic frameworks(MOFs)are compounds consisting of metal ions or clusters coordinated to organic ligands,which show great promise for alleviating or mitigating these challenges owing to their outstanding physical and chemical properties.In this review,we summarize the recent advances of MOFs in the fields of green applications,including carbon capture,harmful gas removal,sewage treatment,and green energy storage.In addition,the challenges and prospects of the large-scale commercialized use of MOFs in handling environmental issues are also discussed.展开更多
The desert in northern China is one of important sources of loess and one significant source of material for sandstorms in Asia.The sand/dust that is transported from desert when sandstorms occur can destroy the growt...The desert in northern China is one of important sources of loess and one significant source of material for sandstorms in Asia.The sand/dust that is transported from desert when sandstorms occur can destroy the growth of crops,cause serious losses and great harm to the economic construction and life safety,and cause natural environment pollution.Hence,it is very important to deepen the research into heavy metals in surface deposits at vulnerable ecological region of arid land of northern China to guide local industrial and agricultural development and improve environmental protection.In this research,10 heavy metal elements(Cr,Mn,Fe,Co,Ni,Cu,Zn,Cd,Pb,and Th)were tested and analyzed in 33 soil sample sites collected from the hinterland of the Tengger Desert,northern China.The results showed that the average abundance of Th exceeded its background soil value of China by more than 5.2 times,which suggests that the Tengger Desert is polluted by Th.In addition,based on principal component analysis,spatial differentiation,and correlation analysis,we identified the source of element with a coefficient of variation in abundance of greater than 0.5 or exceeding the background soil value of China.Principal component analysis and correlation analysis showed that the sources of heavy metals of Cr,Mn,Fe,Co,Ni,Cu,and Cd were similar,while those of Th and Zn were different.Moreover,based on the contents and spatial distribution characteristics of those heavy metal elements,we found that the formation of heavy metal elements enrichment areas is caused by industrial pollution,development of irrigated agricultural,geological,and geomorphic conditions,and the sedimentary environment in the study area.Our result can provide information on the environmental background values of soils in the hinterland of the Tengger Desert.展开更多
文摘Turkey’s automotive industry has begun to occur at a much earlier date compared to other developing countries,through licensing agreements to establish automotive industrial facilities,by importing a kind of technology.Attempts have been made in order to produce the domestic automobile road providing sectoral developments could enter another technology pathway.Moreover,the inventor of a very early date in the Fordist production system,such as 1929 by Ford Motor Company with the license agreement,as if he could provide for setting up production facilities in Istanbul’s company,this bad experience has refrained for years from entering as a manufacturer Ford Motor Turkey market.Thus,while Turkey is an attractive market for car production,on the other hand,sufficient improvement over time in the production of trucks and other automotive products,such as buses has not been achieved.The 1929 experience seems to have been effective in terms of Turkey.Because,it was necessary to wait until 1971 for OYAK and TOFAŞto establish automobile assembly facility with license agreements.With the start of production of two automotive industry facilities,there has been a significant increase in sectoral production figures,but this increase trend has not been sufficiently supported by the government through the incentive system and in the late 1970s the production of the automotive industry has declined.For the first time in 1961,efforts were made to produce a completely domestic automobile,although the prototype of the revolutionary car was successfully produced,mass production could not be started.Subsequently,the production of the Anadol automobile for the second time was tried by means of technology transfer from multiple sources and the serial production of this automobile continued for a while.However,since fiber glass bodywork was used instead of hair bodywork and export opportunities could not be found,production was stopped completely in the end of 1980s.In the 1980s,automobile production continued in two assembly plants and product diversification was carried out to increase the production volume.In the 1990s,three new assembly facilities,Honda,Toyota and Hyundai,were established and the number of assembly production facilities in the country increased to five and technology loyalty based on technology imports continued.Until 2014,the automotive industry continued to consist of five automobile assembly plants and other automotive products assembly plants.In 2015,it was announced to the public that a new domestic car prototype was produced.It was announced that the project will start mass production in 2019.However,it was determined that the prototype would be re-manufactured at the end of 2019 by making changes in the project and that it would be possible to start mass production in 2022.Thus,it is understood that the efforts to start mass production since 2015 can be concluded in 2022,i.e.7 years after the first prototype was produced.It can 161produce prototypes in a short period of four months in Turkey in 1961,as evidenced by an indication of the dependency on a long time wasting which is not technology importation pathway,such as five years.How to break the path of devotion demonstrates that it is a difficult job.Path dependency is thought to result from the education system.
基金a part of broad project,‘Lakehead University-FPInnovations- Forintek Division:Partnership Development
文摘This study aims at exploring the technical efficiency of lum- ber industry in northwestern Ontario, Canada using data envelopment analysis (DEA). The DEA model analyzes relative technical efficiency of lumber mills with disproportionate inputs and outputs by dividing the 10- year time series data, for inputs and outputs of 24 lumber mills, over two periods (1999-2003 and 2004-2008). Four inputs, namely, material (log volume), labour (man-hours), two types of energy (hog-fuel and electric- ity), and one output (lumber volume) are used in this study. The trend analysis shows an annual reduction of 10%, 13% and 13% for lumber output, log consumption (input) and number of employees, respectively, during the period 1999-2008. The results from DEA with two scenarios with energy inputs and without energy inputs, for the two periods are found to be mixed and interesting. While some mills have improved their performance in terms of best use of available scarce inputs in the second period, some have shown negative per cent change in efficiency. In the with energy input and the without energy input scenario, some of the mills show a reduction in efficiency in the second period from the first period, with the highest estimated reductions of-13.9% and -47.6%, respectively. A possible explanation for these negative performances of mills in the latter period is the decline in production in the second period compared to the first period, where these mills were not able to adjust their inputs (mostly labour) as proportional lay-offs might not have been possible. These results provide policy makers and industry stakeholders with an improved understanding of the trends of efficiency and employ- ment as well as reallocation opportunities of future inputs in order to increase benefits from this sector.
文摘The SCP framework is a classical theory of industrial organization,which refers to the market structure,market conduct and market performance.This analysis is based on the SCP framework,choosing the current sporting products industry as object.Study found that China's sporting products industry's geographical layout has a"strong in South and East,weak in North and West"regional development trend,the proportion of abovedesignated enterprises is relatively low,rate of market concentration is not high,product homogenization remain quite serious.With high-speed technological progress and rapid scientific and technological updates,in the future,the sporting products industry will be reorganized according to the subdivision industries,getting rid of homogenization of competition and meeting the needs of consumers in smart wearable,health monitoring and other aspects.
文摘It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strategies can be accepted or corrections implemented since a plan also outlines some strategies for achieving the targets set. In this study, achievements in production and export of industrial forest products, i.e., sawn wood, plywood, chipboard and fibreboard, paper and paperboard and industrial round wood, are compared against targeted figures for 1996 for Tanzania. Discrepancies were obtained by subtracting targeted from achieved values and expressed both as absolute and relative differences in terms of the targeted values, with a negative sign for pro- duction where achievements were less than targets and a positive sign when achievements were higher than targets. Values achieved ranged from 4%-100% of the targeted values, depending on the product, and were only higher than the targeted value for industrial round wood. Possible causes of the discrepancies are inefficiency of parastatal companies, low private investment, sub-maximal in- dustrial operation and plant inefficiencies. Discrepancies could also result from unrealistic data used in planning due to difficulty in data availability and poor intra- and inter-sectoral coordination. The implications of these discrepancies are low contributions of the wood-based industry to the national economy, increased import substitution of wood-based products, increased socio-economic and environmental degradation and decreased integrity in planning and policy making.
基金Supported by National Natural Science Foundation of China(41301111)the "Thirteenth Five-Year Plan" Project of Northeast Institute of Geography and Agroecology of Chinese Academy of Sciences(Y6H2091001-3)
文摘The food industry has developed into a leading industry in Northeast China.However,various economic indicators have shown a significant downward trend in recent years.Through the systematic analysis of the development trend of food industry in Northeast China in the past ten years,especially in 2014,it is found that in the context of stable and smooth operation of the food industry in China,the efficiency of the main processing industries declines in the three northeastern provinces of China,there is a simultaneous decline in the share of output value of the leading industries in the output value of manufacturing sector in three provinces,the collective and individual capital withdrawal is obvious in the paid-up capital,and there is a simultaneous decline in the industrial production and sales rate and the export delivery value.The food industry in Northeast China has plunged into the dilemma of development.Finally,this article puts forward some targeted recommendations from aspects of policy making,industrial agglomeration and enterprise cultivation.
文摘The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagnetic noise generated during a plasma discharge. The main parameters characterizing the quality for super-pure water, tap water and water from the intake in Besko (Poland) before and after the process in the plasma reactor were presented for comparison. In addition, the <sup>17</sup>O NMR (the full width at half maximum) and electrospray ionization mass spectrometry (ESI MS) methods were used to determine differences in physicochemical parameters between the untreated and plasma-treated water. It has been established that the water subjected to plasma treatment shows much different gas absorption properties than the untreated water samples, as a function of temperature and pressure, in this paper we report exemplary data for CO<sub>2</sub>, oxygen and acetylene. The improved gas absorption properties of the plasma-treated water make it attractive for the use in industrial processes. It is worth pointing to a great capacity of the new reactor (4000 l/h), and low energy consumption (20 MJ/h) for the treatment of the above mentioned volume flow rate of water.
文摘China is the world’s largest consumer market for eyeglasses,with the total market volume reaching 80billion yuan.Accordingly,the market has a group of 800 million consumers demanding eyeglasses.The consumers are from different ages。
文摘The Liaoning Light Industrial Products Import and Export Corporation founded in 1954 is the first legally recognized enterprise established in Northeast China. Liaoning province is the show place and gateway to North east China, and a bridge between Asia and Europe. The geographic location and the natural environment of the region with
基金Supported by Project of Jiangsu Agri-Animal Husbandry Vocational College(NSFPT201601)
文摘Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production by liquid fermentation in cylinder were studied. On the basis of single factor test,an orthogonal test was carried out to find optimal conditions for laccase production P. chrysosporium through liquid fermentation. These results showed that the stirring speed of fermentation cylinder had the highest effect on laccase production,and the optimal conditions were shown as follows: the temperature at 28 ℃,the rotating speed at 300 r/min,the ventilation volume of 5 L/min( ventilation ratio of 1.0 vvm),the initial p H of medium of 5,and the inoculation amount of 15%,which gave the highest laccase level of 14. 86 U/ml.
文摘Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.
基金This work was developed as a part of research activities on energy engineering at the Universidade Estadual do Rio Grande do Sul(UERGS)The authors acknowledge the support received by the institutionThe fourth author acknowledges the financial support received from CNPq for his research work(proc.n.309021/2014-6).
文摘The industrial energy diagnosis presented in this work occurred in a milk product cooperative, from an analysis of energy consumption in the main milk industrialization and a diagnosis of energy end uses of lighting and cooling systems. Almost all stages of milk industrialization are used hot water and steam generated in the boilers. The largest electricity consumption in this sector is by electric motors followed by cooling needed to maintain the quality of milk products. Because energy costs represent a significant portion of the monthly cost of the company, an analysis of the energy costs of the past two years to check the consumption of active and reactive energy and power demand contracted is performed. This paper presents the main results of an energy audit in a milk processing industry in southern Brazil.
文摘As a kind of integrated economy,digital economy has an important impact on the economic growth and production and lifestyle of multiple countries and regions,and plays a significant role in promoting the reconstruction of the international economic pattern.As an important industry of China’s national economy,the service industry is crucial to China’s economic growth.This paper measures the development level of digital economy in provinces and cities through constructing digital economy index system,uses super efficiency SBM-Malmquist model to measure total factor productivity of service industry,and tests the influence effect of digital economy on total factor productivity of Chinese service industry.Finally,the optimization path of digital economy on China’s service industry is proposed.
文摘This paper uses an input-output table of China's provinces(2007-2016) to measure carbon emissions of these industries.It employs a Malmquist-Luenberger(ML) index with expected and undesired outputs,and an absolute β convergence and a conditional β convergence model,to conduct an in-depth analysis of dynamic changes and spatial convergence.Carbon emission efficiency of forest processing industries in 25 regions,including Shanghai,Chongqing,Zhejiang,and Jiangsu are increasing,whereas those of Tianjin,Liaoning,Heilongjiang,and Tibet are decreasing.The main contributing factors of carbon emission efficiency in three major regions vary over time.Further,carbon emission efficiency in the eastern,central,and western regions all have absolute β convergence and conditional β convergence,indicating that different regions are developing toward their own goals and industry,yet regions with lower efficiency are catching up with those where with more efficient strategies in place.Finally,this paper proposes according recommendations.
文摘The National High-tech Zone(NHTZs)is an important strategic platform for cultivating high-tech industries and realizing high-quality economic development in China.Based on the combined data from 2006 to 2014 of the industrial enterprise database,the customs database,and the China Development Zones Audit and Announcement Catalogue(abbreviated asthe Catalogue),this paper systematically investigates the influence of the construction of NHTZs on enterprise’s total factor productivity(TFP).Results show that NHTZs have a positive impact on the TFP of enterprises in the zone,and this conclusion is still valid after considering endogeneity problems.Furthermore,the above productivity effects of NHTZs are heterogeneous in terms of enterprise ownership,external environment and establishment time,and NHTZs have greater stimulation effects on enterprise productivity after comparing with other types of functional zones.An investigation of the specific mechanisms at play shows that NHTZs promote the TFP of enterprises in the zone through the release of preferential policies,strengthening the“technology spillover effects”of imported intermediate goods,enhancing enterprise’s innovation ability and attracting talent.In addition,based on the decomposition of industry productivity,this paper also investigates the impact of NHTZs on changes in industry productivity and finds that NHTZs promote the overall productivity of specific industries mainly by stimulating the productivity improvement of incumbent enterprises and expanding the market share of high-productivity enterprises.Moreover,the preferential policies of NHTZs do not significantly stimulate high-productivity enterprises to enter the zones,nor do they cause low-productivity enterprises to exit.This research is helpful in objectively evaluating the economic effects of the NHTZs in China and in providing a theoretical basis for its further adjustment.
基金General Research Fund of Philosophy and Social Sciences in Colleges and Universities of Jiangsu Province in 2020(Grant Number 2020SJA1008)Fundamental Research Funds for the Central Universities(Grant Number 2023SK04)。
文摘The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing province-level panel data spanning from 2004 to 2020.Furthermore,we examine the influence of green finance and technological progress on industrial green total factor productivity using a spatial econometric model.The findings uncover that the relationship between the level of green financial development and industrial green total factor productivity follows a U-shaped curve.Initially,low levels of green financial development exert a suppressive effect on industrial green total factor productivity,proving ineffective in the short term.However,with the progression of green finance development,a positive and significant long-term impact on industrial green total factor productivity emerges.Moreover,technological progress demonstrates a noteworthy promotional effect on industrial green total factor productivity.The analysis delves deeper into revealing that industrial structure and environmental regulation intensity exhibit a significant negative relationship with industrial green total factor productivity.In contrast,both energy structure and education level showcase a substantial positive relationship with industrial green total factor productivity.
基金from the National Natural Science Foundation of China(21776097,21802103,and 22008032)the Guangdong Natural Science Foundation(2017A030313052)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(2019A1515110706)the Guangdong Natural Science Foundation(2017A030313052)。
文摘A series of environmental and energy issues,such as global warming,water pollution,acid rain,and energy shortage,have to be settled urgently.Metal-organic frameworks(MOFs)are compounds consisting of metal ions or clusters coordinated to organic ligands,which show great promise for alleviating or mitigating these challenges owing to their outstanding physical and chemical properties.In this review,we summarize the recent advances of MOFs in the fields of green applications,including carbon capture,harmful gas removal,sewage treatment,and green energy storage.In addition,the challenges and prospects of the large-scale commercialized use of MOFs in handling environmental issues are also discussed.
基金Financial supports from The National Natural Science Foundation of China(Nos.51625402,51790483,51801069 and U19A2084)are greatly acknowledgedPartial financial support came from The Science and Technology Devel-opment Program of Jilin Province(Nos.20190901010JC,20190103003JH,20200401025GX and 20200201002JC)The Changjiang Scholars Program(T2017035).
基金the Basic Research Projects of Shanxi Province(20210302124111)the Graduate Education Innovation Planning Project of Shanxi Province(2021YJJG145)+1 种基金the National Natural Science Foundation of China(41807427,41907370)the Funding by the Qingchuang Science and Technology Project of Shandong University(2021KJ063).
文摘The desert in northern China is one of important sources of loess and one significant source of material for sandstorms in Asia.The sand/dust that is transported from desert when sandstorms occur can destroy the growth of crops,cause serious losses and great harm to the economic construction and life safety,and cause natural environment pollution.Hence,it is very important to deepen the research into heavy metals in surface deposits at vulnerable ecological region of arid land of northern China to guide local industrial and agricultural development and improve environmental protection.In this research,10 heavy metal elements(Cr,Mn,Fe,Co,Ni,Cu,Zn,Cd,Pb,and Th)were tested and analyzed in 33 soil sample sites collected from the hinterland of the Tengger Desert,northern China.The results showed that the average abundance of Th exceeded its background soil value of China by more than 5.2 times,which suggests that the Tengger Desert is polluted by Th.In addition,based on principal component analysis,spatial differentiation,and correlation analysis,we identified the source of element with a coefficient of variation in abundance of greater than 0.5 or exceeding the background soil value of China.Principal component analysis and correlation analysis showed that the sources of heavy metals of Cr,Mn,Fe,Co,Ni,Cu,and Cd were similar,while those of Th and Zn were different.Moreover,based on the contents and spatial distribution characteristics of those heavy metal elements,we found that the formation of heavy metal elements enrichment areas is caused by industrial pollution,development of irrigated agricultural,geological,and geomorphic conditions,and the sedimentary environment in the study area.Our result can provide information on the environmental background values of soils in the hinterland of the Tengger Desert.