Effect of ground motion duration on inelastic displacement ratio of SDOF systems

In this paper,the influence of ground motion duration on the inelastic displacement ratio,C_(1),of highly damped SDOF systems is studied.For this purpose,two sets of spectrally equivalent long and short duration ground motion records were used in an analysis to isolate the effects of ground motion duration on.The effect of duration was evaluated for observed values of C_(1) by considering six ductility levels,and different damping and post-yield stiffness ratios.A new predictive equation of C_(1) also was developed for long and short duration records.Results of non-linear regression analysis of the current study provide an expression with which to quantify the duration effect.Based on the average values of estimated C_(1) ratios for long duration records divided by C_(1) for a short duration set,it is concluded that the maximum difference between long and short duration records occurs when the damping ratio is 0.3 and the post-yield stiffness ratio is equal to zero.

Inelastic displacement ratio of low-to mid-rise BRBFs designed under variable levels of seismicity

Buckling-restrained braces(BRBs)have shown their capability to provide building structures with stiffness,strength,and ductility.Estimating the seismic drifts of buckling-restrained braced frames(BRBFs)is an important design step to control structural and non-structural damage.In current practice of seismic design,the estimation of seismic drifts of BRBFs is performed by using empirical calculations that are independent upon either the type of the structural system or the design level of seismicity.In these empirical calculations,the seismic drifts are estimated by amplifying the reduced elastic drifts obtained under design lateral loading with a displacement amplification factor(DAF).The value of DAF is considered equal to the product of the response modification factor R and the inelastic displacement ratioρ.The goal of the current research is to assess the value ofρfor low-to mid-rise BRBFs designed under low and high levels of seismicity.This goal has been achieved by conducting a series of elastic and inelastic time-history analyses pertaining to an ensemble of earthquake records on 3-,6-and 9-story BRBFs.The results indicate that theρ-ratio increases with an increase in design seismic intensity and an increase in experienced inelasticity.The range ofρfor low seismicity designs ranges from 0.63 to 0.9,while for high seismicity designs this range stretches from 0.83 to 1.29.It has been found that the consideration of a generalρ-ratio of 1.0 is a reasonable estimation for the design of the BRBFs considered in this study.

Electron inelastic mean free paths in solids:A theoretical approach

In the present paper, the inelastic mean free path （IMFP） of incident electrons is calculated as a function of energy for silicon （Si）, oxides of silicon （SiO2）, SiO, and A1203 in bulk form by employing atomic/molecular inelastic cross sections derived by using a semi-empirical quantum mechanical method developed earlier. A general agreement of the present results is found with most of the available data. It is of great importance that we have been able to estimate the minimum IMFP, which corresponds to the peak of inelastic interactions of incident electrons in each solid investigated. New results are presented for SiO, for which no comparison is available. The present work is important in view of the lack of experimental data on the IMFP in solids.

Scaling of residual displacements in terms of elastic and inelastic spectral displacements for existing SDOF systems

Structures undergoing inelastic displacements during earthquake ground motions are known to sustain some amount of residual displacements, which may make them unusable or unsafe. In this study an attempt is made to estimate residual displacements for elastic-perfectly-plastic single-degree-of-freedom oscillators with a given lateral strength ratio. It is observed in the case of a class of ground motions that there are no trends in the dependence of residual displacement on the temporal features of the ground motion, and thus any estimation of residual displacements should be carried out only in the statistical sense. Statistical estimation of residual displacement spectrum via normalization with respect to inelastic or elastic spectral displacements is considered, and it is found that normalization with respect to inelastic spectral displacements is preferable. Expressions for residual displacement spectra are proposed for both types of normalizations and for the givenlateral-strength-ratio type oscillators.

Effect of site amplification on inelastic seismic response

The available models for eff ective periods of site and structure are reviewed in context of frequency tuning in the inelastic seismic response of soil-structure system. The eff ect of seismic intensity and ductility demand, on the eff ective periods, is investigated, and inelastic site amplifi cation is shown to be strongly correlated to the normalized eff ective period. Two non-dimensional parameters, analogous to the conventional site amplifi cation factors in codes, are defi ned to quantify the inelastic site amplifi cation. It is shown that the inelastic site amplifi cation factor (i.e. ratio of constant ductility spectral ordinates at soil site to those at rock outcrop) is able to represent the site eff ects more clearly, as compared to the inelastic site amplifi cation ratio (i.e. ratio of inelastic spectral ordinates at soil site to the corresponding elastic spectral ordinates at rock outcrop). Further, the peak in the amplifi cation factor corresponding to the eff ective site period diminishes rapidly with increasing ductility demand.

Evaluating the inelastic displacement ratios of moment-resisting steel frames designed according to the Egyptian code

Seismic codes estimate the maximum displacements of building structures under the design-basis earthquakes by amplifying the elastic displacements under the reduced seismic design forces with a deflection amplification factor(DAF). The value of DAF is often estimated as ρ× R, where R is the force reduction factor and ρ is the inelastic displacement ratio that accounts for the inelastic action of the structure according to the definition presented by FEMA P695. The purpose of this study is to estimate the ρ-ratio of moment resisting steel frames(MRSFs) designed according to the Egyptian code. This is achieved by conducting a series of elastic and inelastic time-history analyses by two sets of earthquakes on four MRSFs designed according to the Egyptian code and having 2, 4, 8 and 12 stories. The earthquakes are scaled to produce maximum story drift ratios(MSDRs) of 1.0%, 1.5%, 2.0% and 2.5%. The mean values of the ρ-ratio are calculated based on the displacement responses of the investigated frames. The results obtained in this study indicate that the consideration of ρ for both the roof drift ratios(RDRs) and the MSDRs equal to 1.0 is a reasonable estimation for MRSFs designed according to the Egyptian code.

P-Δ effect on inelastic displacement ratio spectra for inelastic structures

For the evaluation of structures with known ductility demands,the constant-ductility displacement ratio spectra(CDDRS) are particularly useful for providing inelastic displacement ratios to estimate maximum lateral inelastic displacement demands from maximum elastic displacement demands.The CDDRS are computed for single-degree-of-freedom systems(SDOF) by considering or ignoring P-Δ effect for different ductility levels when subjected to 344 earthquake ground motions recorded in four site classes.The modified expressions of CDDRS for P-Δ effect are proposed.It is concluded that the P-Δ effect on CDDRS is significant,and the effect increases with the increase of ductility level.In the long-period region,the CDDRS ignoring P-Δ effect almost conforms to the equal-displacement rule.But in the case of higher ductility level,the CDDRS considering P-Δ effect are much higher than 1.0,which do not conform to the equal-displacement rule.

Study on inelastic displacement ratio spectra for near-fault pulse-type ground motions

In displacement-based seismic design, inelastic displacement ratio spectra （IDRS） are particularly useful for estimating the maximum lateral inelastic displacement demand of a nonlinear SDOF system from the maximum elastic displacement demand of its counterpart linear elastic SDOF system. In this study, the characteristics of IDRS for near-fault pulse-type ground motions are investigated based on a great number of earthquake ground motions. The influence of site conditions, ratio of peak ground velocity （PGV） to peak ground acceleration （PGA）, the PGV, and the maximum incremental velocity （MIV） on IDRS are also evaluated. The results indicate that the effect of near-fault ground motions on IDRS are significant only at periods between 0.2 s - 1.5 s, where the amplification can approach 20%. The PGV/PGA ratio has the most significant influence on IDRS among the parameters considered. It is also found that site conditions only slightly affect the IDRS.

Seismic Reliability Assessment of Inelastic SDOF Systems Subjected to Near-Fault Ground Motions Considering Pulse Occurrence

The ground motions in the orientation corresponding to the strongest pulse energy impose more serious demand on structures than that of ordinary ground motions.Moreover,not all near-fault ground motion records present distinct pulses in the velocity time histories.In this paper,the parameterized stochastic model of near-fault ground motion with the strongest energy and pulse occurrence probability is suggested,and the Monte Carlo simulation(MSC)and subset simulation are utilized to calculate the first excursion probability of inelastic single-degree-of-freedom(SDOF)systems subjected to these types of near-fault ground motion models,respectively.Firstly,the influences of variation of stochastic pulse model parameters on structural dynamic reliability with different fundamental periods are explored.It is demonstrated that the variation of pulse period,peak ground velocity and pulse waveform number have significant effects on structural reliability and should not be ignored in reliability analysis.Then,subset simulation is verified to be unbiased and more efficient for computing small reliable probabilities of structures compared to MCS.Finally,the reliable probabilities of the SDOF systems with different fundamental periods subjected to impulsive,non-pulse ground motions and the ground motions with pulse occurrence probability are performed,separately.It is indicated that the ground motion model with the pulse occurrence probability can give a rational estimate on structural reliability.The impulsive and ordinary ground motion models may overestimate and underestimate the reliability of structures with fundamental period much less than the mean pulse period of earthquake ground motions.

Thermal Transport in Methane Hydrate by Molecular Dynamics and Phonon Inelastic Scattering

The heat conduction and thermal conductivity for methane hydrate are simulated from equilibrium molecular dynamics. The thermal conductivity and temperature dependence trend agree well with the experimental results. The nonmonotonic temperature dependence is attributed to the phonon inelastic scattering at higher temperature and to the confinement of the optic phonon modes and low frequency phonons at low temperature. The thermal conductivity scales proportionally with the van der Waals interaction strength, The conversion of a crystal-like nature into an amorphous one oecurs at higher strength. Both the temperature dependence and interaction strength dependence are explained by phonon inelastic scattering.

INELASTIC COUPLED RESPONSE OF ECCENTRIC BUILDINGS WITH RESPECT TO DIFFERENT EARTHQUAKE INTENSITY

Using five-story shear models, the inelastic torsional coupled response of eccentric buildings to different earthquake intensity was studied. Results show that the torsional couple degree is closely related to the strength distribution of the resisting elements. Generally, the building designed by spectral modal analysis method has a tendency to move translationally as the earthquake intensity increases. The building designed by proportion rigidity method, will rotate heavily to moderate earthquake, but when it is intensively excited into the inelastic phase, the coupling would decrease slightly, but could not be neglected.

Design of controlled elastic and inelastic structures

One of the founders of structural control theory and its application in civil engineering, Professor Emeritus Tsu T. Soong, envisioned the development of the integral design of structures protected by active control devices. Most of his disciples and colleagues continuously attempted to develop procedures to achieve such integral control. In his recent papers published jointly with some of the authors of this paper, Professor Soong developed design procedures for the entire structure using a design - redesign procedure applied to elastic systems. Such a procedure was developed as an extension of other work by his disciples. This paper summarizes some recent techniques that use traditional active control algorithms to derive the most suitable （optimal, stable） control force, which could then be implemented with a combination of active, passive and semi-active devices through a simple match or more sophisticated optimal procedures. Alternative design can address the behavior of structures using Liapunov stability criteria. This paper shows a unified procedure which can be applied to both elastic and inelastic structures. Although the implementation does not always preserve the optimal criteria, it is shown that the solutions are effective and practical for design of supplemental damping, stiffness enhancement or softening, and strengthening or weakening.

Finite element investigation of steel built-up shear links subjected to inelastic deformations

Non-linear finite element models accounting for large displacements have been used to investigate the behavior of steel built-up shear links that had previously been tested using large-scale experiments. The links were designed using steel grades with yield points ranging from high to low strengths. The objectives of the numerical analyses were to further investigate the non-linear behavior and to correlate the numerical results with experimental observations. Elasto-plastic as well as cyclic stress-strain material properties were incorporated to study the influence of material behavior on the overall shear link response. Non-linear monotonie analyses of the shear links incorporating the cyclic stress-strain steel properties resulted in similar trends in the response as the backbone curves recorded from the physical experiments. The numerical models of built-up shear links utilizing structural grade steels closely correlated to the experimentally recorded shear strength. Models utilizing low yield point steels overestimated the shear strength, which was caused by the characteristics of cyclic behavior of those steels. The detailed numerical models also allowed for investigation of the plastic strain demands on the different components of the link. It was shown that finite element models combined with appropriate stress-strain relationship may be used with confidence to check the design of shear links of different steel grades and sectional geometries.

The effect of the attractive well of the potential energy surface for Ne-HC1 on rotationally inelastic partial wave cross sections

An interaction potential of the Ne-HC1 van der Waals complex is obtained by utilizing the Huxley analytic potential function to fit the accurate interaction energy data, which have been computed at the coupled cluster singles and doubles including connected triple excitations level and with the augmented correlation consistent polarized valence quintuple zeta basis set extended with a set of 3s3p2dlflg mid-bond functions [CCSD （T）/aug-cc-pV5Z-33211]. The close coupling calculation of state-to-state partial cross sections for collision of Ne with HC1 is first performed by employing the fitted interaction potential. This calculation is performed at the incident energies： 40, 60, 75 and 100 meV, separately. The effects of the long-range attractive and the short-range anisotropic interactions on the inelastic state-to-state partial cross sections are discussed in detail. Two maxima are present in the rotationally inelastic partial cross sections and they originate from different mechanisms.

Microscopic Analysis of Inelastic Proton Scattering off ^(28)Si

The elastic and inelastic scattering data of 22 MeV protons from 28Si havebeen measured.The measured differential cross sections were compared with microscop-ic DWBA calculations in which nuclear transition densities extracted from （e,e’） exper-iments were used directly.A density-dependent nucleon-nucleon effective interaction inthe low-energy region,Complex Effective Interaction with Gaussian form factor（CEG）,was applied in our calculations.Some problems associated were discussed.

Geometric Scaling Analysis of Deep Inelastic Scattering Data Including Heavy Quarks

An analytic massive total cross section of photon proton scattering is derived, which has geometric scaling. A geometric scaling is used to perform a global analysis of the deep inelastic scattering data on inclusive structure function F2 measured in lepton-hadron scattering experiments at small values of Bjorken x. It is shown that the descriptions of the inclusive structure function F2 and longitudinal structure function FL are improved with the massive analytic structure function, which may imply the gluon saturation effect dominating the parton evolution process at HERA. The inclusion of the heavy quarks prevent the divergence of the lepton-hadron cross section, which plays a significant role in the description of the photoproduction region.

Effects of hanging wall and forward directivity in the 1999 Chi-Chi earthquake on inelastic displacement response of structures

The characteristics of the inelastic response of structures affected by hanging wall and forward directivity in the 1999 Chi-Chi earthquake are investigated. Inelastic displacement ratios （IDRs） for ground motions impacted by these nearfield effects are evaluated and comprehensively compared to far-field ground motions. In addition, the inelastic displacement responses to hanging wall and footwall ground motions are compared. It is concluded that the inelastic displacement response is significantly affected in the short period range by hanging wall and in the long period range by footwall. Although high peak ground acceleration was observed at hanging wall stations, the IDRs for structures on hanging wall sites are only larger than footwall sites in the very long period range. Forward directivity effects result in larger IDRs for periods longer than about 0.5s. Adopting statistical relationships for IDRs established using far-field ground motions may lead to either overestimation or underestimation in the seismic evaluation of existing structures located in near-field regions, depending on their fundamental vibration periods.

Analysis of the Diffractive Deep Inelastic Scattering Data with Running Coupling and Gluon Number Fluctuations

We study the effects of running coupling and gluon number fluctuations in the latest diffractive deep inelastic scattering data. It is found that the description of the data is improved once the running coupling and gluon number fluctuations are included with x2/d.o.f. = 0.867, x2/d.o.f. = 0.923 and x2/d.o.f. = 0.878 for three different groups of experimental data. The values of diffusive coefficient subtracted from the fit are smaller than the ones obtained by considering only the gluon number fluctuations in our previous studies. The smaller values of the diffusive coefficient are in agreement with the theoretical predictions, where the gluon number fluctuations are suppressed by the running coupling which leads to smaller values of the diffusive coefficient.

Flow stress model considering the transformation-induced plasticity effect and the inelastic strain recovery behavior

On the basis of continuum mechanics and the Mori-Tanaka mean field theory, a micro-mechanical flow stress model that considered both the transformation-induced plasticity （TRIP） effect and the inelastic strain recovery behavior of TRIP multiphase steels was presented. The relation between the volume fraction of constituent phases and plastic strain was introduced to characterize the transformation-induced plasticity effect of TRIP steels. Loading-unloading-reloading uniaxial tension tests of TRIP600 steel were carried out and the strain recovery behavior after unloading was analyzed. From the experimental data, an empirical elastic modulus expression is extracted to characterize the inelastic strain recovery. A comparison of the predicted flow stress with the experimental data shows a good agreement. The mechanism of the transformation-induced plasticity effect and the inelastic recovery effect acting on the flow stress is also discussed in detail.

RESEARCH ON THE INELASTIC SEISMIC RESPONSES OF SHEAR-TYPE MULTISTORY BUILDINGS WITH REGULAR ASYMMETRY

The inelastic seismic responses of shear-type multistorey buildings with regular asymmetry were analyzed. The effects of the fundamental lateral period, the fundamental frequency ratio of translational to torsional, the eccentric ratio, earthquake intensity and orthogonal earthquake excitations on inelastic displacement and ductility were studied respectively. Numerical results show that aforementioned factors influence the seismic responses of the buildings. The effect of the orthogonal input of ground motion is likely to be restricted to the moving status of eccentric elements.