In order to solve the problem of weak power performance of vehicle equipped with continuously variable transmission(CVT) system working under transient operating conditions, a new CVT equipped with planetary gear mech...In order to solve the problem of weak power performance of vehicle equipped with continuously variable transmission(CVT) system working under transient operating conditions, a new CVT equipped with planetary gear mechanism and flywheel was researched, a design method of transmission parameter optimization was proposed, and the comprehensive matching control strategy was established for the new transmission system. Fuzzy controllers for throttle opening and CVT speed ratio were designed, and power performance and fuel economy of both vehicles respectively equipped with conventional CVT system and new transmission system wrere compared and analyzed by simulation. The results show that power performance and fuel economy of the vehicle equipped with new transmission system are better than that equipped with conventional CVT, thus the rationality of the parameter design method and control algorithm are verified.展开更多
This paper describes the implementation of brake procedures with simulated inertia on a reduced scale brake dynamometer For this purpose, the theoretical foundations are first explained, and test measurements are carr...This paper describes the implementation of brake procedures with simulated inertia on a reduced scale brake dynamometer For this purpose, the theoretical foundations are first explained, and test measurements are carried out. The results show good agreement between calculated and measured accelerations during brake applications. Furthermore, braking processes with various driver models were carried out using associated normal force functions, and examined with regard to their coefficients of friction. A clear difference between these models can be observed. This introduces the possibility for new measurement methods for the analysis of NVH-behavior in brake systems. This work is the first step towards identifying a transfer function between full- and reduced-scale brake dynamometers. In a second step, the temperature scaling must be taken into account. Based on these results, it is possible to isolate the influences of the braking system components from those of the dynamics of the friction coefficient in the boundary layer.展开更多
基金Project(2011BA3019)supported by the Chongqing Natural Science Foundation,China
文摘In order to solve the problem of weak power performance of vehicle equipped with continuously variable transmission(CVT) system working under transient operating conditions, a new CVT equipped with planetary gear mechanism and flywheel was researched, a design method of transmission parameter optimization was proposed, and the comprehensive matching control strategy was established for the new transmission system. Fuzzy controllers for throttle opening and CVT speed ratio were designed, and power performance and fuel economy of both vehicles respectively equipped with conventional CVT system and new transmission system wrere compared and analyzed by simulation. The results show that power performance and fuel economy of the vehicle equipped with new transmission system are better than that equipped with conventional CVT, thus the rationality of the parameter design method and control algorithm are verified.
文摘This paper describes the implementation of brake procedures with simulated inertia on a reduced scale brake dynamometer For this purpose, the theoretical foundations are first explained, and test measurements are carried out. The results show good agreement between calculated and measured accelerations during brake applications. Furthermore, braking processes with various driver models were carried out using associated normal force functions, and examined with regard to their coefficients of friction. A clear difference between these models can be observed. This introduces the possibility for new measurement methods for the analysis of NVH-behavior in brake systems. This work is the first step towards identifying a transfer function between full- and reduced-scale brake dynamometers. In a second step, the temperature scaling must be taken into account. Based on these results, it is possible to isolate the influences of the braking system components from those of the dynamics of the friction coefficient in the boundary layer.
