The uncertainty disturbance is one of the main disturbances that seriously influences the stabilization precision of an aerial inertially stabilized platform(ISP)system.In this paper,to improve the stabilization preci...The uncertainty disturbance is one of the main disturbances that seriously influences the stabilization precision of an aerial inertially stabilized platform(ISP)system.In this paper,to improve the stabilization precision of the ISP under disturbance uncertainty,a robust H∞controller is designed in this paper.Then,the reduction order is carried out for high-order controllers generated by the robust H∞loop shaping control method.The application of the minimum implementation and balanced truncation algorithm in controller reduction is discussed.First,the principle of reduced order of minimum implementation and balanced truncation are analyzed.Then,the method is used to reduce the order of the high-order robust H∞loop shaping controller.Finally,the method is analyzed and verified by the simulations and experiments.The results show that by the reduced-order method of minimum implementation and balanced truncation,the stabilization precision of the robust H∞loop shaping controller is increased by about 10%.展开更多
Among all of the sources of tropical cyclone(TC) intensity forecast errors, the uncertainty of sea surface temperature(SST) has been shown to play a significant role. In the present study, we determine the SST forcing...Among all of the sources of tropical cyclone(TC) intensity forecast errors, the uncertainty of sea surface temperature(SST) has been shown to play a significant role. In the present study, we determine the SST forcing error that causes the largest simulation error of TC intensity during the entire simulation period by using the WRF model with time-dependent SST forcing. The SST forcing error is represented through the application of a nonlinear forcing singular vector(NFSV)structure. For the selected 12 TC cases, the NFSV-type SST forcing errors have a nearly coherent structure with positive(or negative) SST anomalies located along the track of TCs but are especially concentrated in a particular region. This particular region tends to occur during the specific period of the TCs life cycle when the TCs present relatively strong intensity, but are still intensifying just prior to the mature phase, especially within a TC state exhibiting a strong secondary circulation and very high inertial stability. The SST forcing errors located along the TC track during this time period are verified to have the strongest disturbing effect on TC intensity simulation. Physically, the strong inertial stability of TCs during this time period induces a strong response of the secondary circulation from diabatic heating errors induced by the SST forcing error. Consequently, this significantly influences the subsidence within the warm core in the eye region, which,in turn, leads to significant errors in TC intensity. This physical mechanism explains the formation of NSFV-type SST forcing errors. According to the sensitivity of the NFSV-type SST forcing errors, if one increases the density of SST observations along the TC track and assimilates them to the SST forcing field, the skill of TC intensity simulation generated by the WRF model could be greatly improved. However, this adjustment is most advantageous in improving simulation skill during the time period when TCs become strong but are still intensifying just prior to reaching full maturity. In light of this, the region along the TC track but in the time period of TC movement when the NFSV-type SST forcing errors occur may represent the sensitive area for targeting observation for SST forcing field associated with TC intensity simulation.展开更多
The performance of any inertially stabilized platform (ISP) is strongly related to the bandwidth and accuracy of the angular velocity signals. This paper discusses the development of an optimal state estimator for s...The performance of any inertially stabilized platform (ISP) is strongly related to the bandwidth and accuracy of the angular velocity signals. This paper discusses the development of an optimal state estimator for sensing inertial velocity using low-cost micro-electro-mechanical systems (MEMS) sensors. A low-bandwidth gyroscope is used alone with two low-performance accelerometers to obtain the estimation. The gyroscope has its own limited dynamics and mainly contributes to the low-frequency components of the estimation. The accelerometers have inherent biases and mainly contribute to the high-frequency components of the estimation. Extensive experimental results show that the state estimator can achieve high-performance signals over a wide range of velocities without drifts in both the t- and s-domains. Furthermore, with applications in miniature inertially stabilized platforms, the control characteristic presents a significantly improvement over the existing methods. The method can be also applied to robotics, attitude estimation, and friction compensation.展开更多
Abstract To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms (ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlin...Abstract To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms (ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion-integrationdifferentiation (PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7% and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.展开更多
The residual stress generated in the manufacturing process of inertial platform causes the drift of inertial platform parameters in long-term storage condition.However,the existing temperature cycling experiment could...The residual stress generated in the manufacturing process of inertial platform causes the drift of inertial platform parameters in long-term storage condition.However,the existing temperature cycling experiment could not meet the increased repeatability technical requirements of inertial platform parameters.In order to solve this problem,in this paper,firstly the Unigraphics(UG) software and the interface compatibility of ANSYS software are used to establish the inertial platform finite element model.Secondly,the residual stress is loaded into finite element model by ANSYS function editor in the form of surface loads to analyze the efficiency.And then,the generation based on ANSYS simulation inertial platform to accelerate the stability of experiment profile is achieved by the application of the analysis method of orthogonal experimental design and ANSYS thermal-structural coupling.The optimum accelerated stability experiment profile is determined finally,which realizes the rapid,effective release of inertial platform residual stress.The research methodology and conclusion of this paper have great theoretical and practical significance to the production technology of inertial platform.展开更多
This study presents an improved compound control algorithm that substantially enhances the antidisturbance performance of a gear-drive gyro-stabilized platform with a floating gear tension device.The tension device ca...This study presents an improved compound control algorithm that substantially enhances the antidisturbance performance of a gear-drive gyro-stabilized platform with a floating gear tension device.The tension device can provide a self-adjustable preload to eliminate the gap in the meshing process.However,the weaker gear support stiffness and more complex meshing friction are also induced by the tension device,which deteriorates the control accuracy and the ability to keep the aim point of the optical sensors isolated from the platform motion.The modeling and compensation of the induced complex nonlinearities are technically challenging,especially when base motion exists.The aim of this research is to cope with the unmeasured disturbances as well as the uncertainties caused by the base lateral motion.First,the structural properties of the gear transmission and the friction-generating mechanism are analyzed,which classify the disturbances into two categories:Time-invariant and time-varying parts.Then,a proportional-integral controller is designed to eliminate the steady-state error caused by the time-invariant disturbance.A proportional multiple-integral-based state augmented Kalman filter is proposed to estimate and compensate for the time-varying disturbance that can be approximated as a polynomial function.The effectiveness of the proposed compound algorithm is demonstrated by comparative experiments on a gear-drive pointing system with a floating gear tension device,which shows a maximum 76%improvement in stabilization precision.展开更多
基金supported in part by the Beijing Natural Science Foundation(Grant No.3182021)National Natural Science Foundation of China(Grant No.51775017)+1 种基金Research Project of Beijing Academy of Quantum Information Sciences(Grant No.Y18G30)the Open Research Fund of the State Key Laboratory for Manufacturing Systems Engineering(Grant No.sklms2018005)
文摘The uncertainty disturbance is one of the main disturbances that seriously influences the stabilization precision of an aerial inertially stabilized platform(ISP)system.In this paper,to improve the stabilization precision of the ISP under disturbance uncertainty,a robust H∞controller is designed in this paper.Then,the reduction order is carried out for high-order controllers generated by the robust H∞loop shaping control method.The application of the minimum implementation and balanced truncation algorithm in controller reduction is discussed.First,the principle of reduced order of minimum implementation and balanced truncation are analyzed.Then,the method is used to reduce the order of the high-order robust H∞loop shaping controller.Finally,the method is analyzed and verified by the simulations and experiments.The results show that by the reduced-order method of minimum implementation and balanced truncation,the stabilization precision of the robust H∞loop shaping controller is increased by about 10%.
基金sponsored by the National Nature Scientific Foundations of China (Grant Nos. 41930971)the National Key Research and Development Program of China (Grant No. 2018YFC1506402)the National Nature Scientific Foundations of China (Grant No. 41575061)。
文摘Among all of the sources of tropical cyclone(TC) intensity forecast errors, the uncertainty of sea surface temperature(SST) has been shown to play a significant role. In the present study, we determine the SST forcing error that causes the largest simulation error of TC intensity during the entire simulation period by using the WRF model with time-dependent SST forcing. The SST forcing error is represented through the application of a nonlinear forcing singular vector(NFSV)structure. For the selected 12 TC cases, the NFSV-type SST forcing errors have a nearly coherent structure with positive(or negative) SST anomalies located along the track of TCs but are especially concentrated in a particular region. This particular region tends to occur during the specific period of the TCs life cycle when the TCs present relatively strong intensity, but are still intensifying just prior to the mature phase, especially within a TC state exhibiting a strong secondary circulation and very high inertial stability. The SST forcing errors located along the TC track during this time period are verified to have the strongest disturbing effect on TC intensity simulation. Physically, the strong inertial stability of TCs during this time period induces a strong response of the secondary circulation from diabatic heating errors induced by the SST forcing error. Consequently, this significantly influences the subsidence within the warm core in the eye region, which,in turn, leads to significant errors in TC intensity. This physical mechanism explains the formation of NSFV-type SST forcing errors. According to the sensitivity of the NFSV-type SST forcing errors, if one increases the density of SST observations along the TC track and assimilates them to the SST forcing field, the skill of TC intensity simulation generated by the WRF model could be greatly improved. However, this adjustment is most advantageous in improving simulation skill during the time period when TCs become strong but are still intensifying just prior to reaching full maturity. In light of this, the region along the TC track but in the time period of TC movement when the NFSV-type SST forcing errors occur may represent the sensitive area for targeting observation for SST forcing field associated with TC intensity simulation.
基金Foundation item: National Natural Science Foundation of China (50805144)
文摘The performance of any inertially stabilized platform (ISP) is strongly related to the bandwidth and accuracy of the angular velocity signals. This paper discusses the development of an optimal state estimator for sensing inertial velocity using low-cost micro-electro-mechanical systems (MEMS) sensors. A low-bandwidth gyroscope is used alone with two low-performance accelerometers to obtain the estimation. The gyroscope has its own limited dynamics and mainly contributes to the low-frequency components of the estimation. The accelerometers have inherent biases and mainly contribute to the high-frequency components of the estimation. Extensive experimental results show that the state estimator can achieve high-performance signals over a wide range of velocities without drifts in both the t- and s-domains. Furthermore, with applications in miniature inertially stabilized platforms, the control characteristic presents a significantly improvement over the existing methods. The method can be also applied to robotics, attitude estimation, and friction compensation.
基金co-supported by the National Natural Science Foundation of China (Nos. 51135009 and 51105371)
文摘Abstract To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms (ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion-integrationdifferentiation (PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7% and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.
文摘The residual stress generated in the manufacturing process of inertial platform causes the drift of inertial platform parameters in long-term storage condition.However,the existing temperature cycling experiment could not meet the increased repeatability technical requirements of inertial platform parameters.In order to solve this problem,in this paper,firstly the Unigraphics(UG) software and the interface compatibility of ANSYS software are used to establish the inertial platform finite element model.Secondly,the residual stress is loaded into finite element model by ANSYS function editor in the form of surface loads to analyze the efficiency.And then,the generation based on ANSYS simulation inertial platform to accelerate the stability of experiment profile is achieved by the application of the analysis method of orthogonal experimental design and ANSYS thermal-structural coupling.The optimum accelerated stability experiment profile is determined finally,which realizes the rapid,effective release of inertial platform residual stress.The research methodology and conclusion of this paper have great theoretical and practical significance to the production technology of inertial platform.
基金This work was supported by the National Natural Science Foundation of China(Grant No.U19A2072)the Foundation by China Academy of Launch Vehicle Technology(Grant No.CALT201706).
文摘This study presents an improved compound control algorithm that substantially enhances the antidisturbance performance of a gear-drive gyro-stabilized platform with a floating gear tension device.The tension device can provide a self-adjustable preload to eliminate the gap in the meshing process.However,the weaker gear support stiffness and more complex meshing friction are also induced by the tension device,which deteriorates the control accuracy and the ability to keep the aim point of the optical sensors isolated from the platform motion.The modeling and compensation of the induced complex nonlinearities are technically challenging,especially when base motion exists.The aim of this research is to cope with the unmeasured disturbances as well as the uncertainties caused by the base lateral motion.First,the structural properties of the gear transmission and the friction-generating mechanism are analyzed,which classify the disturbances into two categories:Time-invariant and time-varying parts.Then,a proportional-integral controller is designed to eliminate the steady-state error caused by the time-invariant disturbance.A proportional multiple-integral-based state augmented Kalman filter is proposed to estimate and compensate for the time-varying disturbance that can be approximated as a polynomial function.The effectiveness of the proposed compound algorithm is demonstrated by comparative experiments on a gear-drive pointing system with a floating gear tension device,which shows a maximum 76%improvement in stabilization precision.