The productivity calculation model of perforated horizontal well and optimization of inflow profile

Aiming at the large error in productivity predication and incomplete consideration in completion parameters design of perforated horizontalwell,a model which coupled the relationship of pressure and flow rate in reservoir seepage,near-wellbore inflow and wellbore flow was established.The impact of near-wellbore heterogeneity,wellbore flow pressure drop and completion parameters on the inflow profile of horizontalwell is analysed.Studies showed that with a stronger near-wellbore heterogeneity,the inflowprofilewouldfluctuatemore seriously.Perforationdensityhada great influence onthe inflow profile and local changes of it would bring a shunt effect.Completion design of variable density perforated horizontalwell with an optimized inflowprofile whichwas close to a standard profilewould improve the horizontal well development effect.The achievement can provide directive meanings to productivity predication and completion parameters design of horizontal wells in oilfield.

A new mathematical model for horizontal wells with variable density perforation completion in bottom water reservoirs

Horizontal wells are commonly used in bottom water reservoirs,which can increase contact area between wellbores and reservoirs.There are many completion methods used to control cresting,among which variable density perforation is an effective one.It is difficult to evaluate well productivity and to analyze inflow profiles of horizontal wells with quantities of unevenly distributed perforations,which are characterized by different parameters.In this paper,fluid flow in each wellbore perforation,as well as the reservoir,was analyzed.A comprehensive model,coupling the fluid flow in the reservoir and the wellbore pressure drawdown,was developed based on potential functions and solved using the numerical discrete method.Then,a bottom water cresting model was established on the basis of the piston-like displacement principle.Finally,bottom water cresting parameters and factors influencing inflow profile were analyzed.A more systematic optimization method was proposed by introducing the concept of cumulative free-water production,which could maintain a balance（or then a balance is achieved）between stabilizing oil production and controlling bottom water cresting.Results show that the inflow profile is affected by the perforation distribution.Wells with denser perforation density at the toe end and thinner density at the heel end may obtain low production,but the water breakthrough time is delayed.Taking cumulative free-water production as a parameter to evaluate perforation strategies is advisable in bottom water reservoirs.

Combined Experimental and Numerical Investigations on the Roughness Effects on the Aerodynamic Performances of LPT Blades

The aerodynamic performance of a high-load low-pressure turbine blade cascade has been analyzed for three different distributed surface roughness levels(Ra) for steady and unsteady inflows. Results from CFD simulations and experiments are presented for two different Reynolds numbers(300000 and 70000 representative of take-off and cruise conditions, respectively) in order to evaluate the roughness effects for two typical operating conditions. Computational fluid dynamics has been used to support and interpret experimental results, analyzing in detail the flow field on the blade surface and evaluating the non-dimensional local roughness parameters, further contributing to understand how and where roughness have some influence on the aerodynamic performance of the blade. The total pressure distributions in the wake region have been measured by means of a five-hole miniaturized pressure probe for the different flow conditions, allowing the evaluation of profile losses and of their dependence on the surface finish, as well as a direct comparison with the simulations. Results reported in the paper clearly highlight that only at the highest Reynolds number tested(Re=300000) surface roughness have some influence on the blade performance, both for steady and unsteady incoming flows. In this flow condition profile losses grow as the surface roughness increases, while no appreciable variations have been found at the lowest Reynolds number. The boundary layer evolution and the wake structure have shown that this trend is due to a thickening of the suction side boundary layer associated to an anticipation of transition process. On the other side, no effects have been observed on the pressure side boundary layer.