A Practical Regular LDPC Coded Scheme for Physical-Layer Information Security

In this paper,we aim to design a practical low complexity low-density parity-check(LDPC)coded scheme to build a secure open channel and protect information from eavesdropping.To this end,we first propose a punctured LDPC coded scheme,where the information bits in a codeword are punctured and only the parity check bits are transmitted to the receiver.We further propose a notion of check node type distribution and derive multi-edge type extrinsic information transfer functions to estimate the security performance,instead of the well-known weak metric bit error rate.We optimize the check node type distribution in terms of the signal-to-noise ratio(SNR)gap and modify the progressive edge growth algorithm to design finite-length codes.Numerical results show that our proposed scheme can achieve a lower computational complexity and a smaller security gap,compared to the existing scrambling and puncturing schemes.

Wireless Information and Power Transfer in Underwater Acoustic Sensor Networks

Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the terminals. The application of WIPT to the underwater acoustic sensor networks(UWASNs) not only retains the long range communication capabilities, but also provides an auxiliary and convenient energy supplement way for the terminal sensors, and thus is a promising scheme to solve the energy-limited problem for the UWASNs. In this paper, we propose the integration of WIPT into the UWASNs and provide an overview on various enabling techniques for the WIPT based UWASNs(WIPT-UWASNs) as well as pointing out future research challenges and opportunities for WIPT-UWASNs.

May Protein Be as the Genetic Information Carrier?

The 'central dogma 'of molecular biology indicated that the direction of the genetic information flow is from DNA - RNA - protein. However, up to now, the central dogma has not obtained a sufficient theoretical support from cybernetics and information theory. In addition, some special cases in biology, such as, although the scrapie prion is irreversibly inactivated by alkali, five procedures with more specificity for modifying nucleic acids failed to cause inactivation and when a resting cell is activated by some factors and division occurs, protein synthesis has begun before DNA synthesis etc., are also very difficult to explain clearly by the central dogma. A broad outline of a mechanism for reverse translation can easily be 'designed', based on the normal translation process, and this serves both to prove that there is no fundamental theoretical reason for the central dogma, and to illustrate why the redundancy of genetic code is not a problem.This paper, based on some previous research work of authors, from the view of cybernetics, information theory and theoretical biology, explored the possibility of protein as a genetic information carrier, the probable pairing ways between ammo acids-codons, and the direction of genetic information flows etc., at theory, by comparing and analyzing theoretically the characteristics of information carriers existing in DNA and protein. The authors inferred that perhaps protein may join the informational transferring as a genetic information carrier; the direction of genetic information flows, besides the way described by the central dogma, seem also to have another type, that is, genetic information flowing from protein - DNA (RNA) - protein, which also includes the genetic information flow in the central dogma. Undoubtedly, the research on problems about the position and roles of protein during the genetic information transferring will have an important effect on the investigation and development of molecular biology, molecular genetics and gene engineering.

High-Power Simultaneous Wireless Information and Power Transfer: Injection-Locked Magnetron Technology

Applications using simultaneous wireless information and power transfer(SWIPT)have increased significantly.Wireless communication technologies can be combined with the Internet of Things to develop many innovative applications using SWIPT,which is mainly based on wireless energy harvesting from electromagnetic waves used in communications.Wireless power transfer that uses magnetrons has been developed for communication technologies.Injection-locked magnetrons that can be used to facilitate high-power SWIPT for several devices are reviewed in this paper.This new technology is expected to pave the way for promoting the application of SWIPT in a wide range of fields.

The Image Property in an EIT Information Transfer System

We focus on the study of the transferred image property in an electromagnetically induced transparency （EIT）system. In our experiment, a triple-peak image is effectively transferred trom a coupling beam to a signal beam based on the FIT effect. It is found that the transferred image intensity profile of the signal beam is the same as that of the coupling beam while not in phase. Furthermore, the propagation property of the transferred image is studied. Due to the narrowing effect, the transferred image keeps narrowing and maintains the shape well within a certain distance outside of the medium. Our experimental results are in excellent agreement with the theoretical analysis.

Scalable Quantum Information Transfer between Individual Nitrogen-Vacancy Centers by a Hybrid Quantum Interface

We develop a design of a hybrid quantum interface for quantum information transfer （QIT）, adopting a nanome- chanical resonator as the intermedium, which is magnetically coupled with individual nitrogen-vacancy centers as the solid qubits, while eapacitively coupled with a coplanar waveguide resonator as the quantum data bus. We describe the Hamiltonian of the model, and analytically demonstrate the QIT for both the resonant interaction and large detuning cases. The hybrid quantum interface allows for QIT between arbitrarily selected individual nitrogen-vacancy centers, and has advantages of the sealability and controllability. Our methods open an alter- native perspective for implementing QIT, which is important during quantum storing or processing procedures in quantum computing.

Quantum Information Transfer from a Double Quantum Dot System to a Cavity Field

In this paper, we propose a scheme to realize quantum information transfer from a double quantum dot （DQD） system to a quantized cavity field. The DQD and the cavity field are treated as a two-state charge qubit and a continuous-variable system, respectively. It is shown that quantum information encoded in the two-state DQD system can be transferred to quantum states of the cavity field with a continuous-variable basis through appropriate projective measurements with respect to the DQD.

Speeding up transmissions of unknown quantum information along Ising-type quantum channels

Quantum teleportation with entanglement channels and a series of two-qubit SWAP gates between the nearestneighbor qubits are usually utilized to achieve the transfers of unknown quantum state from the sender to the distant receiver. In this paper, by simplifying the usual SWAP gates we propose an approach to speed up the transmissions of unknown quantum information, specifically including the single-qubit unknown state and two-qubit unknown entangled ones,by a series of entangling and disentangling operations between the remote qubits with distant interactions. The generic proposal is demonstrated specifically with experimentally-existing Ising-type quantum channels without transverse interaction; liquid NMR-molecules driven by global radio frequency electromagnetic pulses and capacitively-coupled Josephson circuits driven by local microwave pulses. The proposal should be particularly useful to set up the connections between the distant qubits in a chip of quantum computing.

Scheme for realizing quantum computation and quantum information transfer with superconducting qubits coupling to a 1D transmission line resonator

This paper proposes a simple scheme for realizing one-qubit and two-qubit quantum gates as well as multiqubit entanglement based on de-SQUID charge qubits through the control of their coupling to a 1D transmission line resonator （TLR）. The TLR behaves effectively as a quantum data-bus mode of a harmonic oscillator, which has several practical advantages including strong coupling strength, reproducibility, immunity to 1/f noise, and suppressed spontaneous emission. In this protocol, the data-bus does not need to stay adiabatically in its ground state, which results in not only fast quantum operation, hut also high-fidelity quantum information processing. Also, it elaborates the transfer process with the 1D transmission line.

Efficient scheme for entangled states and quantum information transfer with trapped atoms in a resonator

A protocol is proposed to generate atomic entangled states and implement quantum information transfer in a cavity quantum electrodynamics system. It utilizes Raman transitions or stimulated Raman adiabatic passages between two systems to entangle the ground states of two three-state A-type atoms trapped in a single mode cavity. It does not need the measurements on cavity field nor atomic detection and can be implemented in a deterministic fashion. Since the present protocol is insensitive to both cavity decay and atomic spontaneous emission, it may have some interesting applications in quantum information processing.

Simultaneous wireless information and power transfer with fixed and adaptive modulation

Activating Wireless Power Transfer (WPT) in Radio-Frequency (RF) to provide on-demand energy supply to widely deployed Internet of Everything devices is a key to the next-generation energy self-sustainable 6G network. However, Simultaneous Wireless Information and Power Transfer (SWIPT) in the same RF bands is challenging. The majority of previous studies compared SWIPT performance to Gaussian signaling with an infinite alphabet, which is impossible to implement in any realistic communication system. In contrast, we study the SWIPT system in a well-known Nakagami-m wireless fading channel using practical modulation techniques with finite alphabet. The attainable rate-energy-reliability tradeoff and the corresponding rationale are revealed for fixed modulation schemes. Furthermore, an adaptive modulation-based transceiver is provided for further expanding the attainable rate-energy-reliability region based on various SWIPT performances of different modulation schemes. The modulation switching thresholds and transmit power allocation at the SWIPT transmitter and the power splitting ratios at the SWIPT receiver are jointly optimized to maximize the attainable spectrum efficiency of wireless information transfer while satisfying the WPT requirement and the instantaneous and average BER constraints. Numerical results demonstrate the SWIPT performance of various fixed modulation schemes in different fading conditions. The advantage of the adaptive modulation-based SWIPT transceiver is validated.

Bidirectional transfer of quantum information for unknown photons via cross-Kerr nonlinearity and photon-number-resolving measurement

We propose an arbitrary controlled-unitary （CU） gate and a bidirectional transfer scheme of quantum information （BTQI） for unknown photons. The proposed CU gate utilizes quantum non-demolition photon-number-resolving measure- ment based on the weak cross-Kerr nonlinearities （XKNLs） and two quantum bus beams; the proposed CU gate consists of consecutive operations of a controlled-path gate and a gathering-path gate. It is almost deterministic and is feasible with current technology when a strong amplitude of the coherent state and weak XKNLs are employed. Compared with the existing optical multi-qubit or controlled gates, which utilize XKNLs and homodyne detectors, the proposed CU gate can increase experimental realization feasibility and enhance robustness against decoherence. According to the CU gate, we present a BTQI scheme in which the two unknown states of photons between two parties （Alice and Bob） are mutually swapped by transferring only a single photon. Consequently, by using the proposed CU gate, it is possible to experimentally implement the BTQI scheme with a certain probability of success.

Programmable Metasurface for Simultaneously Wireless Information and Power Transfer System

Implementing self-sustainable wireless communication systems is urgent and challenging for 5G and 6G technologies.In this paper,we elaborate on a system solution using the programmable metasurface(PMS)for simultaneous wireless information and power transfers(SWIPT),offering an optimized wireless energy management network.Both transmitting and receiving sides of the proposed solution are presented in detail.On the transmitting side,employing the wireless power transfer(WPT)technique,we present versatile power conveying strategies for near-field or far-field targets,single or multiple targets,and equal or unequal power targets.On the receiving side,utilizing the wireless energy harvesting(WEH)technique,we report our work on multi-functional rectifying metasurfaces that collect the wirelessly transmitted energy and the ambient energy.More importantly,a numerical model based on the plane-wave angular spectrum method is investigated to accurately calculate the radiation fields of PMS in the Fresnel and Fraunhofer regions.With this model,the efficiencies of WPT between the transmitter and the receiver are analyzed.Finally,future research directions are discussed,and integrated PMS for wireless information and wireless power is outlined.

Information Transfer in the Teaching of English Pronunciation

Information transfer technique is exploitable in teaching EFL Learners English pronunciation. This paper explores its possible application in a remedial lesson for the normal university learners of English major.

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision. It is important for certification institutions to explore methods for updating and transferring present standards, to accelerate the transfer of standard information and ensure present standards are implemented in a timely manner.

An Analysis of the Mode of Information Transfer in High-context Cultures in Terms of Red Cliff

According to Edward Hall,cultures can be categorized as being either high or low context.Chinese culture is typically high-context culture.The paper tries to explore the mode of information transfer in high-context cultures in terms of Red Cliff.The discussion will be focused on dialogues and the costume.This will help understand the characteristics of high-context culture and make the communication between people from cultures of different contexts easier.

DPAL-BERT:A Faster and Lighter Question Answering Model

Recent advancements in natural language processing have given rise to numerous pre-training language models in question-answering systems.However,with the constant evolution of algorithms,data,and computing power,the increasing size and complexity of these models have led to increased training costs and reduced efficiency.This study aims to minimize the inference time of such models while maintaining computational performance.It also proposes a novel Distillation model for PAL-BERT(DPAL-BERT),specifically,employs knowledge distillation,using the PAL-BERT model as the teacher model to train two student models:DPAL-BERT-Bi and DPAL-BERTC.This research enhances the dataset through techniques such as masking,replacement,and n-gram sampling to optimize knowledge transfer.The experimental results showed that the distilled models greatly outperform models trained from scratch.In addition,although the distilled models exhibit a slight decrease in performance compared to PAL-BERT,they significantly reduce inference time to just 0.25%of the original.This demonstrates the effectiveness of the proposed approach in balancing model performance and efficiency.

Secure Beamforming Design for SWIPT in Cooperative D2D Communications

In device-to-device(D2D) communications, device terminal relaying makes it possible for devices in a network to function as transmission relays for each other to enhance the spectral efficiency. In this paper we consider a cooperative D2D communication system with simultaneous wireless information and power transfer(SWIPT). The cooperative D2D communication scheme allows two nearby devices to communicate with each other in the licensed cellular bandwidth by assigning D2D transmitters as half-duplex(HD) relay to assists cellular downlink transmissions. In particular, we focus on secure information transmission for the cellular users when the idle D2D users are the potential eavesdroppers. We aim to design secure beamforming schemes to maximize the D2D users data rate while guaranteeing the secrecy rate requirements of the cellular users and the minimum required amounts of power transferred to the idle D2D users. To solve this non-convex problem, a semi-definite programming relaxation(SDR) approach is adopted to obtain the optimal solution. Furthermore, we propose two suboptimal secure beamforming schemes with low computational complexity for providing secure communication and efficient energy transfer. Simulation results demonstrate the superiority of our proposed scheme.

Joint Scheduling and Resource Allocation for Federated Learning in SWIPT-Enabled Micro UAV Swarm Networks

Micro-UAV swarms usually generate massive data when performing tasks. These data can be harnessed with various machine learning(ML) algorithms to improve the swarm’s intelligence. To achieve this goal while protecting swarm data privacy, federated learning(FL) has been proposed as a promising enabling technology. During the model training process of FL, the UAV may face an energy scarcity issue due to the limited battery capacity. Fortunately, this issue is potential to be tackled via simultaneous wireless information and power transfer(SWIPT). However, the integration of SWIPT and FL brings new challenges to the system design that have yet to be addressed, which motivates our work. Specifically,in this paper, we consider a micro-UAV swarm network consisting of one base station(BS) and multiple UAVs, where the BS uses FL to train an ML model over the data collected by the swarm. During training, the BS broadcasts the model and energy simultaneously to the UAVs via SWIPT, and each UAV relies on its harvested and battery-stored energy to train the received model and then upload it to the BS for model aggregation. To improve the learning performance, we formulate a problem of maximizing the percentage of scheduled UAVs by jointly optimizing UAV scheduling and wireless resource allocation. The problem is a challenging mixed integer nonlinear programming problem and is NP-hard in general. By exploiting its special structure property, we develop two algorithms to achieve the optimal and suboptimal solutions, respectively. Numerical results show that the suboptimal algorithm achieves a near-optimal performance under various network setups, and significantly outperforms the existing representative baselines. considered.

Optimized LDPC differential-encoded 16QAM scheme for high-speed transmission systems

The 16-ary quadrature amplitude modulation （16QAM） is a high spectral efficient scheme for high-speed transmission systems. To remove the phase ambiguity in the coherent detection system, differential-encoded 16QAM （DE-16QAM） is usually used, however, it will cause performance degradation about 3 dB as compared to the conventional 16QAM. To overcome the performance loss, a serial concatenated system with outer low density parity check （LDPC） codes and inner DE-16QAM is proposed. At the receiver, joint iterative differential demodulation and decoding （ID） is carried out to approach the maximum likelihood performance. Moreover, a genetic evolution algorithm based on the extrinsic information transfer chart is proposed to optimize the degree distribution of the outer LDPC codes. Both theoretical analyses and simulation results indicate that this algorithm not only compensates the performance loss, but also obtains a significant performance gain, which is up to 1 dB as compared to the conventional non-DE-16QAM.