Failure mechanism and infrared radiation characteristic of hard siltstone induced by stratification effect

The deformation in sedimentary rock induced by train loads has potential threat to the safe operation of tunnels. This study investigated the influence of stratification structure on the infrared radiation and temporal damage mechanism of hard siltstone. The uniaxial compression tests, coupled with acoustic emission(AE) and infrared radiation temperature(IRT) were conducted on siltstones with different stratification effects. The results revealed that the stratigraphic structure significantly affects the stress-strain response and strength degradation characteristics. The mechanical parameters exhibit anisotropy characteristics, and the stratification effect exhibits a negative correlation with the cracking stress and peak stress. The failure modes caused by the stratification effect show remarkable anisotropic features, including splitting failure(Ⅰ: 0°-22.50°, Ⅱ: 90°), composite failure(45°), and shearing failure(67.50°). The AE temporal sequences demonstrate a stepwise response characteristic to the loading stress level. The AE intensity indicates that the stress sensitivity of shearing failure and composite failure is generally greater than that of splitting failure. The IRT field has spatiotemporal migration and progressive dissimilation with stress loading and its dissimilation degree increases under higher stress levels. The stronger the stratification effect, the greater the dissimilation degree of the IRT field. The abnormal characteristic points of average infrared radiation temperature(AIRT) variance at local stress drop and peak stress can be used as early and late precursors to identify fracture instability. Theoretical analysis shows that the competitive relationship between compaction strengthening and fracturing damage intensifies the dissimilation of the infrared thermal field for an increasing stress level. The present study provides a theoretical reference for disaster warnings in hard sedimentary rock mass.

Identifying camellia oil adulteration with selected vegetable oils by characteristic near-infrared spectral regions

In this paper,a methodology based on characteristic spectral bands of near infrared spectroscopy(1000-2500 nm)and multivariate analysis was proposed to identify camellia oil adulteration withvegetable oils,Sunflower,peanut and corn oils were selected to conduct the test.Pure camlia oiland that adulterated with varying concentrations(1-10%with the gradient of 1%,10-40%withthe gradient of 5%,40-100%with the gradient of 10%)of each type of the three vegetable oilswere prepared,respectively.For each type of adulterated oil,full-spectrum partial least squarespartial least squares(PLS)models and synergy interval partial least squares(SI-PLS)modelswere developed.Parameters of these models were optimized simultaneously by cross-validation,The SI-PLS models were proved to be better than the full-spectrum PLS models.In SI-PLSmodels,the correlation coefficients of predition set(Rp)were 0.9992,0.9998 and 0.9999 foradulteration with sunflower oil,peanut oiloil seperately;the corresponding root meansquare errors of prediction set(RMSEP).66nd 0.37.Furthermore,a new genericPLS model was built based on the chalselected from the intervals of thethree SI-PLS models to identify the oil adulterantsardless of the adultrated oil types.Themodel achieved with Rp=0.9988 and RMSEP==1.52,These results indicated that the charac-teristic near infrared spectral regions could determine the level of adulteration in the camllia oil.

Quantitative description of infrared radiation characteristics of preflawed sandstone during fracturing process

Previous studies show that infrared radiation temperature(IRT)abnormalities are always accompanied by the crack development in rocks under external loads.In this context,experiments were conducted on preflawed sandstone to investigate the infrared radiation characteristics during failure process.Two indicators were defined herein,i.e.coefficient of variation of IRT(CVIRT)and skewness of IRT(SIRT).The regression analysis shows that the IRT probability distributions during loading process fit the Gaussian model.The variations in the CVIRT are characterized by four stages:primary stage,steady stage,accelerating stage and post-peak stage.Besides,the variations in the SIRT are divided into three stages:primary stage,steady stage and failure and post-peak stage.The precursor point for preflawed rock failure is identified based on the CVIRTetime curve,with average precursor point of 83%of the peak stress.Compared with other IRT indicators,the proposed two IRT indicators have higher sensitivity to IRT abnormalities during failure process.Furthermore,the connection between the IRT indicators and the rock fracturing was investigated to interpret the IRT indicator abnormalities.Based on the Verhulst inverse function,a new quantitative model was presented to describe the primary stage,steady stage and accelerating stage of the CVIRTetime curve.The results obtained in this study can provide early-warning information for rock failure prediction.

Study on optical constants inversion and infrared transmission characteristics of aerosol particles

Based on the experimental infrared spectral transmittances,an inverse model has been developed to determine the optical constants of the aerosol particles (SiO2 and Al2O3).Combined with the Mie theory and Kramers-Kronig (K-K) relations,the complex refractive indices of the SiO2 and Al2O3 particles are retrieved.The effects of the measurement errors on the inverse results are also investigated.With the optical constants inversed from the experiment,the discrete ordinate method (DOM) is used to calculate the infrared transmission characteristics of the aerosol particle cloud.Considering the multi-scattering and self-emission of the particles,the equivalent transmittance ratio (ETR) is suggested to evaluate the infrared transmission characteristics of the aerosol particles.Particular attention is given to analyze the effects of the volume fraction and diameters on infrared transmission characteristics.When the volume fraction is larger than 0.001,the particle diameter has little effect on the infrared transmission characteristics.For the uniform monodisperse particles in the detection waveband range of 3-5 μm and 8-12 μm,there exists a critical diameter where the ETR reaches the minimum value.In addition,the ETR of 3-5 μm is smaller than that of 8-12 μm with the same volume fraction and particle diameter.