Effects of the Dicranopteris linearis root system and initial moisture content on the soil disintegration characteristics of gully erosion

Benggang erosion is caused by a special type of gully erosion in southern China that seriously endangers the local ecology and environment.In this study,typical Benggang collapsing-wall soils were used as the study area to investigate the effects of different initial moisture contents and dicranopteris linearis root weight densities,as well as their interactions on disintegration in orthogonal test method.The results showed that the rate of soil disintegration decreased as a linear function of the initial moisture content.The soil disintegration rate tended to rise and then fall as the root weight density increased,reflecting an optimum root weight density of 0.75-1.00 g/100 cm3.The incorporation of dicranopteris linearis roots was most effective for soil consolidation in the shallow layers of soil.In addition,the disintegration rate of the collapsing-wall soils increases as the soil layer deepened.The dicranopteris linearis root system and initial moisture content had an interactive effect that was more pronounced in deeper soils.However,the combined effect of these processes was always dominated by the initial moisture content.Moderate initial soil moisture content(0.20-0.24 g/g)and the addition of a high root density in dicranopteris linearis(0.75-1.00 g/100 cm3)were the optimal combinations that reduced the disintegration rate.In conclusion,maintaining a suitable natural moisture content in collapsing-wall soils and taking measures that use plants to consolidate soil can effectively prevent and control the occurrence of Benggang erosion.The results of this study provided further insight into the factors that influence soil disintegration and offered a scientific basis for soil erosion management in the southern China.

The impacts of oxytetracycline on humification during manure composting can be alleviated by adjusting initial moisture contents as illustrated by NMR

Oxytetracycline(OTC)residues have been found in soil and water,and they may pose potential risks to agricultural ecological environments.One of the most impactful ways for OTC to enter the soil and water environments is through excrement used as organic fertilizer.Therefore,it is important to remove OTC during manure composting and to understand the transformation of the organic materials during composting in the presence of OTC.In the present paper,chicken manure and wheat sawdust spiked with OTC were composted under different initial moisture contents(MC)to evaluate the degradation of OTC and changes of organic matter during the composting process.The MC has a significant effect on OTC degradation during composting.A higher MC of 65% was more conducive to OTC degradation(77.4%)and compost maturity compared to the lower MC.However,the higher MC of 65%could increase the ammonia volatilization by promoting nitrification compared to the lower MC.An increase in the initial MC could improve the composting temperature.NMR results illustrated that the presence of OTC could affect the internal transformation of aliphatics,and OTC inhibited compost humification.Thus,an initial MC of 55–65% can alleviate the impacts of OTC on humification during manure composting.

Effect of Size and Initial Water Content on the Effective Diffusion Coefficient during Convective Drying of Sweet Potato Cut into Cubic and Cylindrical Shapes

In this article, we investigated the influence of size and initial water content on the effective diffusion coefficient of sweet potatoes samples cut into cubic and cylindrical shapes. The sizes of the cubic samples are 0.5, 1, 1.5, 1.75, 2, 2.5 and 3 cm edge with a respective initial water content of 2.7, 3.76, 3.48, 2.68, 3.28, 2.17 and 2.29 kg/kgms. For cylindrical samples, the radius is set at 0.5 cm and sample heights are 1, 1.5, 2, 2.5, 3, 3.5 and 4 cm with respective water contents of 2.2, 3.19, 2.85, 2.1, 2.17, 2.39 and 2.03 kg/kgms. The effective diffusion coefficients of cubic samples are of the order of 10−10 and 10−9 m2∙s−1 grew with sample edge. As for the cylindrical samples, the effective diffusion coefficients were of the order of 10−9 m2∙s−1 and there was no linear correlation between cylinder height and their effective diffusion coefficient. As for the examination of the initial water content on the effective diffusion coefficient, it turned out that the initial water content had no influence on the effective diffusion coefficient of the sweet potato samples.

Dry Matter Accumulation,Moisture Content in Maize Kernel and Their Influences on Mechanical Harvesting

[Objective] The aim of this study was to investigate the dry matter accumulation,moisture content in maize kernel and their influences on mechanical harvesting.[Methods] Using Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 as experimental materials,we preliminarily measured the dynamic changes of dry matter accumulation and moisture content with the days after pollination lasted,and investigated the effect of moisture content in kernels on mechanical harvesting of Zhengdan 958 and Liyu 16.[Results] During summer growing season,Zhengdan 958 and Liyu 16 became physiologically mature and suitable for harvesting at about 51 days after pollination,Xianyu 335 and Hongda 8 required 58 days to become physiologically mature and suitable for harvesting after pollination.At physiologically mature stage,the moisture contents in kernels of Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 were respectively 33.74%,28.86%,32.05% and 35.24%,respectively.Adopting mechanical harvesting at physiologically mature stage,the kernel loss rate of Zhengdan 958 and Liyu 16 was consistent with the range of mechanical operation index（kernel loss rate of 0.84%≤2%）,while the percentage of broken kernels did not accord with the range of mechanical operation index（kernel crashing rate of 10.12%≧1%）.The results indicate that Zhengdan 958 and Liyu 16 are not suitable for mechanical harvesting using full feeding combine havester.[Conclusion] This study provided theoretical basis for improving the maize harvest index under delayed harvesting.

Effects of Fertilization on Moisture Content of Soils in the Loess Hilly-gully Region

[Objective] The aim of this study was to study the influence of plants on the soil moisture content under different fertilization.[Method] Using sainfoin,sweet clover,Astragalus adsurgens,alfalfa,ryegrass,little flower,white clover as experimental material,this study explored the effects of soil moisture on the improvement of soil quality.[Result] Results showed that the soil moisture content of different plants follows as：sainfoin 〉sweet clover 〉Astragalus adsurgens 〉alfalfa perennial ryegrass 〉small crown 〉white clover,and the average moisture content reached 24.13% which was 2.45% higher than that of control group.At planting white clover,sweet clover,under the condition of 7 kinds of crops,in the treatments without fertilizer and with organic fertilizer,soil moisture content of soil in 0-20 cm grew significantly.[Conclusion] The application of organic fertilizer and growing of plants would improve soil moisture in abandoned fields,enhance the ability of soil water supply,and improve soil fertility.

Effects of Ground Mulching Treatments on Soil Moisture Content in Second-generation Seed Garden of Pinus elliottii

Different ground mulching treatments were designed to observe the effects on soil moisture content in a second-generation seed orchard of Pinus elliottii. The results showed that： （1） there were extreme differences in soil moisture content Ⅰ and soil moisture content Ⅲ, but no obvious difference in soil moisture content II was observed; and （2） the high-to-low order of soil moisture content Ⅰ under different ground mulching treatments was white film〉sawdust〉black film〉the control, and the highest value was higher than the lowest one by 26.69%; the high-to-low order of soil moisture content Ⅱ under different ground mulching treatments was white film〉black film〉sawdust〉the control, and the highest value was higher than the lowest one by 20.64%; and the high-to-low order of soil moisture content Ⅲ under different ground mulching treatments was black film〉white film〉sawdust〉the control, and the highest value was higher than the lowest one by 26.61%.

Effects of Soil Moisture Content and p H on Residual Dynamics of Chlorothalonil in Acidified Soil

[Objective] This study aimed to investigate the residual dynamics of chlorothalonil in acidified soil under different conditions of soil moisture content and pH. [Method] By simulation tests, the effects of different soil moisture content and pH on chlorothalonil residues in acidified soil were analyzed. [Result] Under different conditions of soil moisture content and pH, the residual quantity of chlorothalonil in acidified soil was reduced gradually with the extension of incubation time. To be specific, the reduction rate of chlorothalonil residues in soil was extremely high within the first three days and slightly declined at 3-7 d; after 7 d, the residual quantity of chlorothalonil in soil was reduced slowly and steadily. [Conclusion] This study provides the reference for soil environmental remediation and maintenance of a health cultivation system.

Real-time Monitoring Scheme of Soil Moisture Content in Paddy Field

The monitoring of soil moisture content in paddy field is one of important parts and contents of regional soil moisture monitoring. But a good monitoring scheme hasn’t been established. A real-time monitoring scheme of soil moisture content in paddy field was put forward from two key links of soil moisture content monitoring and field water-layer monitoring. This scheme could meet the alternative monitoring requirements of soil moisture content in water layer and none-water layer. It had a good maneuverability and could provide references for practical work.

Influences of soil moisture and salt content on loess shear strength in the Xining Basin, northeastern Qinghai-Tibet Plateau

Moisture and salt content of soil are the two predominant factors influencing its shear strength. This study aims to investigate the effects of these two factors on shear strength behavior of loess in the Xining Basin of Northeast Qinghai-Tibet Plateau, where such geological hazards as soil erosion, landslides collapse and debris flows are widespread due to the highly erodible loess. Salinized loess soil collected from the test site was desalinized through salt-leaching in the laboratory. The desalinized and oven-dried loess samples were also artificially moisturized and salinized in order to examine how soil salinity affects its shear strength at different moisture levels. Soil samples prepared in different ways(moisturizing, salt-leaching, and salinized) were measured to determine soil cohesion and internal friction angle. The results show that salt-leaching up to 18 rounds almost completely removed the salt content and considerably changed the physical components of loess, but the soil type remained unchanged. As salt content increases from 0.00% to 12.00%, both the cohesion and internal friction angle exhibit an initial decrease and then increase with salt content. As moisture content is 12.00%, the salt content threshold value for both cohesion and internal friction angle is identified as 3.00%. As the moisture content rises to 16.0% and 20.00%, the salt content threshold value for cohesion is still 6.00%, but 3.00% for internal friction angle. At these thresholds soil shear strength is the lowest, below which it is inversely related to soil salinity. Beyond the thresholds, however, the relationship is positive. Dissimilar to salinity, soil moisture content exerts an adverse effect on shear strength of loess. The findings of this study can provide a valuable guidance on stabilizing the engineering properties of salinized loess to prevent slope failures during heavy rainfall events.

A distributed measurement method for in-situ soil moisture content by using carbon-fiber heated cable

Moisture content is a fundamental physical index that quantifies soil property and is closely associatedwith the hydrological, ecological and engineering behaviors of soil. To measure in-situ soil moisturecontents, a distributed measurement system for in-situ soil moisture content （SM-DTS） is introduced.The system is based on carbon-fiber heated cable （CFHC） technology that has been developed to enhancethe measuring accuracy of in-situ soil moisture content. Using CFHC technique, a temperature characteristicvalue （Tt） can be defined from temperatureetime curves. A relationship among Tt, soil thermalimpedance coefficient and soil moisture content is then established in laboratory. The feasibility of theSM-DTS technology to provide distributed measurements of in-situ soil moisture content is verifiedthrough field tests. The research reported herein indicates that the proposed SM-DTS is capable ofmeasuring in-situ soil moisture content over long distances and large areas.

Performance evaluation of two types of heated cables for distributedtemperature sensing-based measurement of soil moisture content

Distributed temperature sensing(DTS)using heated cables has been recently developed for distributed monitoring of in-situ soil moisture content.In this method,the thermal and electrical properties of heated cables have a significant influence on the measurement accuracy of soil moisture content.In this paper,the performances of two heated cables,i.e.the carbon-fiber heated cable(CFHC)and the metalnet heated cable(MNHC),are studied in the laboratory.Their structures,uniformity in the axial direction,measurement accuracy and suitability are evaluated.The test results indicate that the MNHC has a better uniformity in the axial direction than CFHC.Both CFHC and MNHC have high measurement accuracy.The CFHC is more suitable for short-distance measurement(500 m),while the MNHC can be used for longdistance measurement(>500 m).

Measurement of lumber moisture content based on PCA and GSSVM

Lumber moisture content(LMC) is the important parameter to judge the dryness of lumber and the quality of wooden products.Nevertheless the data acquired are mostly redundant and incomplete because of the complexity of the course of drying,by interference factors that exist in the dryness environment and by the physical characteristics of the lumber itself.To improve the measuring accuracy and reliability of LMC,the optimal support vector machine(SVM) algorithm was put forward for regression analysis LMC.Environmental factors such as air temperature and relative humidity were considered,the data of which were extracted with the principle component analysis method.The regression and prediction of SVM was optimized based on the grid search(GS) technique.Groups of data were sampled and analyzed,and simulation comparison of forecasting performance shows that the main component data were extracted to speed up the convergence rate of the optimum algorithm.The GS-SVM shows a better performance in solving the LMC measuring and forecasting problem.

Study on the Relationship between.the Moisture Content of Brown Rice and Milling Characteristics

An experiment about rice milling was made to study on the relationship between the different moisture content of brown rice and the energy consumption, the broken rice rate, the crack rate and the head rice yield. It could be concluded that the head rice yield increased at first falls and then along with the raise of moisture content and it could reach the maximum 70.78% when moisture content was 15.5%; the energy consumption of rice milling decreased along with the increase of moisture contents; the broken rice rate fell at first and then increased along with the raise of moisture contents and it could reach the minimum 4.28% when the moisture content was 15.5%.

Prediction model of moisture content of dead fine fuel in forest plantations on Maoer Mountain,Northeast China

Preventing and suppressing forest fires is one of the main tasks of forestry agencies to reduce resource loss and requires a thorough understanding of the importance of factors affecting their occurrence.This study was carried out in forest plantations on Maoer Mountain in order to develop models for predicting the moisture content of dead fine fuel using meteorological and soil variables.Models by Nelson(Can J For Res 14:597-600,1984)and Van Wagner and Pickett(Can For Service 33,1985)describing the equilibrium moisture content as a function of relative humidity and temperature were evaluated.A random forest and generalized additive models were built to select the most important meteorological variables affecting fuel moisture content.Nelson’s(Can J For Res 14:597-600,1984)model was accurate for Pinus koraiensis,Pinus sylvestris,Larix gmelinii and mixed Larix gmelinii—Ulmus propinqua fuels.The random forest model showed that temperature and relative humidity were the most important factors affecting fuel moisture content.The generalized additive regression model showed that temperature,relative humidity and rain were the main drivers affecting fuel moisture content.In addition to the combined effects of temperature,rainfall and relative humidity,solar radiation or wind speed were also significant on some sites.In P.koraiensis and P.sylvestris plantations,where soil parameters were measured,rain,soil moisture and temperature were the main factors of fuel moisture content.The accuracies of the random forest model and generalized additive model were similar,however,the random forest model was more accurate but underestimated the effect of rain on fuel moisture.

Does nitrogen application rate affect the moisture content of corn grains?

Nitrogen fertilizer application is an important measure to obtain high and stable corn yield,and the moisture content of corn grains is an important factor affecting the quality of mechanical grain harvesting.In this study,four different nitrogen fertilizer treatments from 0 to 450 kg ha^(–1) pure nitrogen were set for a planting density of 12.0×10^(4) plants ha^(–1) in 2017 and 2018,and 18 different nitrogen fertilizer treatments from 0 to 765 kg ha^(–1) pure nitrogen were set for planting densities of 7.5×10^(4) and 12.0×10^(4) plants ha^(–1) in 2019,to investigate the effect of nitrogen application rate on the moisture content of corn grains.Under each treatment,the growth of corn,leaf area index(LAI)of green leaves,grain moisture content,and grain dehydration rate were measured.The results showed that,as nitrogen application increased from 0 to 765 kg ha^(–1),the silking stage was delayed by about 1 day,the maturity stage was delayed by about 1–2 days,and the number of physiologically mature green leaves and LAI increased.At and after physiological maturity,the extreme difference in grain moisture content between different nitrogen application rates was 1.9–4.0%.As the amount of nitrogen application increased,the corn grain dehydration rate after physiological maturity decreased,but it did not reach statistical significance between nitrogen application rate and grain dehydration rate.No significant correlation was observed between LAI at physiological maturity and grain dehydration rate after physiological maturity.In short,nitrogen application affected the grain moisture content of corn at and after physiological maturity,however,the difference in grain moisture content among different nitrogen application rates was small.These results suggest that the effect of nitrogen application on the moisture content of corn grains should not be considered in agricultural production.

The Characteristic Relationship Between Oil Uptake and Moisture Content during the High Temperature Immersion Frying of Thin Potato Crisps

Thin potato crisps (2mm) were fried at 170℃, 180℃ and 190℃ for varioustimes from 10s to 180s inclusive. It was found that definite oil uptake, moisture loss trends existduring the frying process. No significant difference in the oil uptake or moisture loss ratesbetween flat-cut and ridge-cut crisps exists. Also found in this study was that an increased oiltemperature promoted higher moisture loss rates. In turn, the higher moisture loss rates contributedto a higher oil uptake rate. It was found, based on the volumetric plots of oil content υs. watercontent, that the oil uptake rate was proportional to the moisture loss rate. As a result, it hasbeen shown that there is a possibility of having a characteristic curve of oil uptake againstmoisture content.

Influence of soil moisture content on pullout properties of Hippophae rhamnoides Linn. roots

Plant root system plays an important role in preventing soil erosion and improving slope stability.However,its performance is significantly affected by soil moisture content,and the role of soil moisture in root reinforcement is not fully understood.In this study,the influence of soil moisture on root pullout properties was studied by experiments.Vertical in-situ pullout tests under four different levels of soil matric suction(12 kPa,18 kPa,24 kPa,30 kPa)were carried out on roots of sea buckthorn plants(Hippophae rhamnoides Linn.)which were artificially cultivated for 7 months.Diameter and length of the root system of sea buckthorn were investigated.The results showed that a very significant correlation was observed between root diameter(D)and root length(L)(P<0.01),and root diameter decreased with soil depth.When soil bulk density was constant,peak pullout force(F)and friction coefficient of root-soil interface(μ)decreased with increasing gravimetric soil moisture content in power functions.Soil moisture content significantly affected root pullout resistance because the increase of soil moisture content decreased the friction coefficient between the roots and soil.Root diameter at breakage point(Db)and length of root segment left in soil(Lb)were increased with soil moisture content.In addition,peak pullout force of the roots increased in a power function with root diameter at the soil surface(D0)and in a linear function with total root length(L).The results provided an experimental basis for quantifying the effects of soil moisture content on soil reinforcement by plant roots.

Nondestructive testing method of wood moisture content based on a planar capacitance sensor model

For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.

Diurnal variation models for fine fuel moisture content in boreal forests in China

Studying diurnal variation in the moisture content of fine forest fuel(FFMC)is key to understanding forest fire prevention.This study established models for predicting the diurnal mean,maximum,and minimum FFMC in a boreal forest in China using the relationship between FFMC and meteorological variables.A spline interpolation function is proposed for describing diurnal variations in FFMC.After 1 day with a 1 h field measurement data testing,the results indicate that the accuracy of the sunny slope model was 100%and 84%when the absolute error was<3%and<10%,respectively,whereas the accuracy of the shady slope model was 72%and 76%when the absolute error was<3%and<10%,respectively.The results show that sunny slope and shady slope models can predict and describe diurnal variations in fine fuel moisture content,and provide a basis for forest fire danger prediction in boreal forest ecosystems in China.

Study of corn kernel breakage susceptibility as a function of its moisture content by using a laboratory grinding method

The rate of corn kernel breakage in the grain combine harvesters is a crucial factor affecting the quality of the grain shelled in the field. The objective of the present study was to determine the susceptibility of corn kernels to breakage based on the kernel moisture content in order to determine the moisture content that corresponds to the lowest rate of breakage.In addition, we evaluated the resistance to breakage of various corn cultivars. A total of 17 different corn cultivars were planted at two different sowing dates at the Beibuchang Experiment Station, Beijing and the Xinxiang Experiment Station(Henan Province) of the Chinese Academy of Agricultural Sciences. The corn kernel moisture content was systematically monitored and recorded over time, and the breakage rate was measured by using the grinding method. The results for all grain samples from the two experimental stations revealed that the breakage rate y is quadratic in moisture content x,y=0.0796 x^(2)-3.3929 x+78.779;R^(2)0=0.2646, n=512. By fitting to the regression equation, a minimum corn kernel breakage rate of 42.62% was obtained, corresponding to a corn kernel moisture content of 21.31%. Furthermore, in the 90% confidence interval, the corn kernel moisture ranging from 19.7 to 22.3% led to the lowest kernel breakage rate, which was consistent with the corn kernel moisture content allowing the lowest breakage rate of corn kernels shelled in the field with combine grain harvesters. Using the lowest breakage rate as the critical point, the correlation between breakage rate and moisture content was significantly negative for low moisture content but positive for high moisture content. The slope and correlation coefficient of the linear regression equation indicated that high moisture content led to greater sensitivity and correlation between grain breakage and moisture content. At the Beibuchang Experiment Station, the corn cultivars resistant to breakage were Zhengdan 958(ZD958) and Fengken 139(FK139), and the corn cultivars non-resistant to breakage were Lianchuang 825(LC825), Jidan 66(JD66), Lidan 295(LD295), and Jingnongke 728(JNK728). At the Xinxiang Experiment Station, the corn cultivars resistant to breakage were HT1, ZD958 and FK139, and the corn cultivars non-resistant to breakage were ZY8911, DK653 and JNK728. Thus, the breakage classifications of the six corn cultivars were consistent between the two experimental stations. In conclusion, the results suggested that the high stability of the grinding method allowed it to be used to determine the corn kernel breakage rates of different corn cultivars as a function of moisture content, thus facilitating the breeding and screening of breakage-resistant corn.