Effects of Initial and Boundary Conditions on Heavy Rainfall Simulation over the Yellow Sea and the Korean Peninsula:Comparison of ECMWF and NCEP Analysis Data Effects and Verification with Dropsonde Observation

This study evaluated the simulation performance of mesoscale convective system(MCS)-induced precipitation,focusing on three selected cases that originated from the Yellow Sea and propagated toward the Korean Peninsula.The evaluation was conducted for the European Centre for Medium-Range Weather Forecasts(ECMWF)and National Centers for Environmental Prediction(NCEP)analysis data,as well as the simulation result using them as initial and lateral boundary conditions for the Weather Research and Forecasting model.Particularly,temperature and humidity profiles from 3D dropsonde observations from the National Center for Meteorological Science of the Korea Meteorological Administration served as validation data.Results showed that the ECMWF analysis consistently had smaller errors compared to the NCEP analysis,which exhibited a cold and dry bias in the lower levels below 850 hPa.The model,in terms of the precipitation simulations,particularly for high-intensity precipitation over the Yellow Sea,demonstrated higher accuracy when applying ECMWF analysis data as the initial condition.This advantage also positively influenced the simulation of rainfall events on the Korean Peninsula by reasonably inducing convective-favorable thermodynamic features(i.e.,warm and humid lower-level atmosphere)over the Yellow Sea.In conclusion,this study provides specific information about two global analysis datasets and their impacts on MCS-induced heavy rainfall simulation by employing dropsonde observation data.Furthermore,it suggests the need to enhance the initial field for MCS-induced heavy rainfall simulation and the applicability of assimilating dropsonde data for this purpose in the future.

Initial Pre-stress Finding and Structural Behaviors Analysis of Cable Net Based on Linear Adjustment Theory

The tensile cable-strut structure is a self-equilibrate pre-stressed system.The initial pre-stress cal- culation is the fundamental structural analysis.A new numerical procedure was developed.The force density method is the cornerstone of analytical formula,and then introduced into linear adjustment theory;the least square least norm solution,the optimized initial pre-stress,is yielded.The initial pre-stress and structural performances of a particular single-layer saddle-shaped cable-net structure were analyzed with the developed method,which is proved to be efficient and correct.The modal analyses were performed with respect to various pre-stress levels.Finally,the structural performances were investigated comprehensively.

Molecular cloning,characterization and promoter analysis of LbgCWIN1 and its expression profiles in response to exogenous sucrose during in vitro bulblet initiation in lily

Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellular space, are key enzymes participating in sucrose allocation in higher plants. Previous studies have shown that CWINs play an essential role in bulblet initiation process in bulbous crops, but the underlying molecular mechanism remains unclear. Here, a CWIN gene of Lilium brownii var. giganteum(Lbg) was identified and amplified from genomic DNA. Quantitative RT-PCR assays revealed that the expression level of LbgCWIN1 was highly upregulated exactly when the endogenous starch degraded in non-sucrose medium during in vitro bulblet initiation in Lbg. Phylogenetic relationship, motif, and domain analysis of LbgCWIN1 protein and CWINs in other plant species showed that all sequences of these CWIN proteins were highly conserved. The promoter sequence of LbgCWIN1 possessed a number of alpha-amylase-, phytohormone-, light-and stress-responsive cis-elements. Meanwhile, β-glucuronidase(GUS) assay showed that the 459 bp upstream fragment from the translational start site displayed maximal promoter activity. These results revealed that LbgCWIN1 might function in the process of in vitro bulblet initiation and be in the response to degradation of endogenous starch.

Discourse Analysis of the Belt and Road Initiative From the Perspective of Central Asian Countries: A Case Study of the Republic of Kazakhstan

This study employs Norman Fairclough’s Critical Discourse Analysis(CDA)three-dimensional model,using the Republic of Kazakhstan as a case study,to delve into the discourse construction of China’s Belt and Road Initiative(BRI)in Central Asian countries.Through detailed analysis of policy documents,media reports,and public discussions in Central Asian countries,this paper reveals how the BRI constructs specific social practices,discourse events,and textual meanings within these nations.The findings indicate that through this global development strategy,China has not only strengthened its economic ties with Central Asian countries but has also exerted profound influences on political,cultural,and social levels.

Application of a Typhoon Initialization Scheme Based on the Incremental Analysis Updates Technique in a Rapid Update Cycle System

Initialization of tropical cyclones plays an important role in typhoon numerical prediction. This study applied a typhoon initialization scheme based on the incremental analysis updates (IAU) technique in a rapid refresh system to improve the prediction of Typhoon Lekima (2019). Two numerical sensitivity experiments with or without application of the IAU technique after performing vortex relocation and wind adjustment procedures were conducted for comparison with the control experiment, which did not involve a typhoon initialization scheme. Analysis of the initial fields indicated that the relocation procedure shifted the typhoon circulation to the observed typhoon region, and the wind speeds became closer to the observations following the wind adjustment procedure. Comparison of the results of the sensitivity and control experiments revealed that the vortex relocation and wind adjustment procedures could improve the prediction of typhoon track and intensity in the first 6-h period, and that these improvements were extended throughout the first 12-h period of the prediction by the IAU technique. The new typhoon initialization scheme also improved the simulated typhoon structure in terms of not only the wind speed and warm core prediction but also the organization of the eye of Typhoon Lekima. Diagnosis of the tendencies of variables showed that use of the IAU technique in a typhoon initialization scheme is efficacious in resolving the spurious high-frequency noise problem such that the model is able to reach equilibrium as soon as possible.

Homotopy Analysis Method for Solving Initial Value Problems of Second Order with Discontinuities

In this paper, the standard homotopy analysis method was applied to initial value problems of the second order with some types of discontinuities, for both linear and nonlinear cases. To show the high accuracy of the solution results compared with the exact solution, a comparison of the numerical results was made applying the standard homotopy analysis method with the iteration of the integral equation and the numerical solution with the Simpson rule. Also, the maximum absolute error, , the maximum relative error, the maximum residual error and the estimated order of convergence were given. The research is meaningful and I recommend it to be published in the journal.

Initial pre-stress finding procedure and structural performance research for Levy cable dome based on linear adjustment theory

The cable-strut structural system is statically and kinematically indeterminate. The initial pre-stress is a key factor for determining the shape and load carrying capacity. A new numerical algorithm is presented herein for the initial pre-stress finding procedure of complete cable-strut assembly. This method is based on the linear adjustment theory and does not take into account the material behavior. By using this method,the initial pre-stress of the multi self-stress modes can be found easily and the cal-culation process is simplified and efficient also. Finally,the initial pre-stress and structural performances of a particular Levy cable dome are analyzed comprehensively. The algorithm has proven to be efficient and correct,and the numerical results are valuable for practical design of Levy cable dome.

SWOT Analysis and Challenges of Nile Basin Initiative:An Integrated Water Resource Management Perspective

River Nile is one of the longest transboundery rivers and it is shared and used by Burundi,Democratic Republic of Congo,Egypt,Ethiopia,Eritrea,Kenya,Rwanda,Sudan,Tanzania and Uganda.As of today,the Nile is a crucial resource for the economic development of the Nile Basin countries and a vital source of livelihood for 160 million inhabitants as well as 300 million people living in the 10 riparian countries.The Nile Basin Initiative(NBI) is one of the international cooperative river basin management program and regional partnership where all the Nile Basin countries except Eritrea unite to pursue long-term sustainable development,improved land use practices and management.This review therefore focused on the challenges not faced on NBI in terms of integrated use of the river and conducted analysis of strengths,weaknesses,opportunities and threats(SWOT) based on secondary data.The result of the review revealed that for decades,the Nile Basin people have been facing many complex environmental,social,economic and political challenges that have made it difficult for the proper management and sustainability of Nile water.The initiative provides training to develop skills in government ministries,non-governmental organizations and local communities in each country.It is also working to raise awareness of critical environmental issues by strengthening networks of environmental education practitioners;developing curriculum in the education sector.The challenges of NBI include the involvement and funding of World Bank,lack of sufficient staff,procedural and policies conflicts,lack of coordination and linkage with other regional institutions and lack of recognition as river basin organization.Considering the complex nature of the project,it is recommended that the NBI should come up with a strong multi-disciplinary monitoring and evaluation team to follow up all implemented projects.The NBI should carry out participatory land use planning in communities along the river basin.Moreover,livelihood analysis should be carried out especially in communities along the Nile to come up with poverty eradication projects which are socially acceptable,applicable,economically viable and affordable.

Research on the bearing capacity characteristics of initial support for horseshoe-shaped tunnel prefabrication

In view of the limited theoretical research on the load model of initial support for horseshoe-shaped prefabrication,this study focuses on the Luochuan Tunnel on the Xi'an-Yan'an newly built railway as the research object to explore its load model,load characteristic curve,plastic zone,deformation,and critical thickness.Theoretical research and numerical analysis were conducted.The results indicate that under the same boundary conditions,the ultimate bearing capacity of the prefabricated assembly initial support is higher than that of the shotcrete initial support,resulting in larger ultimate deformation capacity of the prefabricated assembly initial support.Based on numerical calculations,the ultimate deformation and critical thickness of the prefabricated initial lining for single-and double-track railway tunnels are obtained when buried at depths of 200,500,and 900 m in rock masses of classes Ⅲ,Ⅳ,and Ⅴ.

Dynamic analysis of double-layer and pre-stressed multi-limb six-axis force sensor

In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sensor which is installed on the end-effectors of intelligent robots will have influence on the veracity of detection and judgment to working environment contact force by intelligent robots directly. In this paper, dynamic analysis to double-layer and pre-stressed multi-limb six-axis force sensor is conducted. First, the structure of the sensor is introduced, and the limb number is confirmed by introducing the related definitions of convex analysis. Then, based on vibration of multiple-degree-of-freedom system, a mechanical vibration simplified model of double-layer and pre-stressed multiple limb six-axis force sensor is set up. After that, movement differential equations of sensor and the response of analytical expression are deduced, and the movement differential equations is solved. Finally, taking the double-layer and pre-stressed seven limb six-axis force sensor as an example, numerical calculation and simulation of deriving result is conducted, which verify the correctness and feasibility of the theoretical analysis.

Analysis of China＇s International Oil and Gas Cooperation Environment under the Belt and Road Initiative

China's Belt and Road Initiative has great significance for China's energy security and the economic development of the countries along the route of the Belt and Road Initiative. Focusing on oil and gas cooperation, the paper aims to define the political, economic, legal, and operational conditions required to facilitate the development of the Belt and Road Initiative by analyzing the advantages, disadvantages, opportunities and risks of China's current international oil and gas cooperation environment. This will help to drive China's international oil and gas partnerships and increase China's discourse power in the international oil and gas markets by exploring new approaches to improving regional communication mechanisms, financial cooperation frameworks, multilateral legal systems and overall strength of the enterprises in the oil and gas industry.

Numerical Analysis of Plasma Initiated Polymerization

Plasma initiated polymerization is a kind of well-known radical polymerization mechanism, but it has the ＇living＇ polymerization feature and produces ultra-high molecular weight polymer. In order to explain such phenomena, we calculate the basic data of plasma initiated polymerization of methylmethacrylate （MMA） according to the principle of polymer physics and chemistry. It results in that the radical concentration ranges from 10^-12mol/L to 10^-16mol/L corresponding to the radical life in 10^4s to 10^8s, which means the radicals have a long lifetime. Moreover because of the long lifetime radicals it causes a unique feature rather than the common radical polymerization, and also shows no ＂living polymerization＂. It is noticed in experiments that there are two key factors playing important roles. One is the effective radical amount produced during the plasma discharging while the another is the diffusion factor.

Stress Analysis of New Type Pre-Stressed Anchor Bearing Plate Combining Stamping with Welding Forming and Its Anchorage Zone

An anchor bearing plate transfers the anchoring force from anchor plate to the concrete and the pre-stress is formed in the concrete structure. Currently, the main type of anchor bearing plate is cast iron. It is brittle during transportation and tension process. This paper presents a new type of anchor bearing plate combined stamping with welding forming. The structure of the new type anchor bearing plate is introduced. The stress states of the anchor bearing plate and anchorage zone under work are studied. Various specifications of anchor bearing plate are studied by ANSYS finite element analysis software following the AASHTO specification. The analysis results are compared with the results of the same type of OVM round-shaped anchor plate. The study results show that the new pre-stressed anchor plates combined stamping with welding forming are feasible and more sturdy which can meet the engineering demand.

Analysis of Strengths,Weaknesses,Opportunities,and Threats on the Development and Internationalization of China’s Vocational Education in the Context of“The Belt and Road Initiative”Strategy

The belt and road initiative strategy is proposed based on the stable and sustainable cooperation on economy and development between China and neighboring countries.The development of economy can affect every aspect of vocational education development.Therefore,vocational education in China must be moved toward internationalization to achieve sustainable development in the face of the implementation of the belt and road initiative strategy.The analysis data obtained through the strengths,weaknesses,opportunities,and threats analysis method on the internationalization of China’s vocational education under the background of the belt and road initiative strategy were the advantages analysis(strengths)of continuous maturity in developing of vocational education,which drives by economic development and the foreign employment and entrepreneurship guidance mechanism;the disadvantages analysis(weaknesses)of lack talent cultivation and weak branding of vocational education;analysis of support opportunities given by national policy;and threats analysis of social culture in the involved countries along the route.To further develop and expand China’s vocational education under the background of the belt and road initiative strategy,some countermeasures were proposed such as improves cultivation or training of talents,to build strong branding of China vocational education,and faces cultural challenges to facilitate the international development of China vocational education.

Study on Multi-Scale Blending Initial Condition Perturbations for a Regional Ensemble Prediction System

An initial conditions （ICs） perturbation method was developed with the aim to improve an operational regional ensemble prediction system （REPS）. Three issues were identified and investigated： （1） the impacts of perturbation scale on the ensemble spread and forecast skill of the REPS; （2） the scale characteristic of the IC perturbations of the REPS; and （3） whether the REPS＇s skill could be improved by adding large-scale information to the IC perturbations. Numerical experiments were conducted to reveal the impact of perturbation scale on the ensemble spread and forecast skill. The scales of IC perturbations from the REPS and an operational global ensemble prediction system （GEPS） were analyzed. A ＂multi-scale blending＂ （MSB） IC perturbation scheme was developed, and the main findings can be summarized as follows： The growth rates of the ensemble spread of the REPS are sensitive to the scale of the IC perturbations; the ensemble forecast skills can benefit from large-scale perturbations; the global ensemble IC perturbations exhibit more power at larger scales, while the regional ensemble IC perturbations contain more power at smaller scales; the MSB method can generate IC perturbations by combining the small-scale component from the REPS and the large-scale component from the GEPS; the energy norm growth of the MSB-generated perturbations can be appropriate at all forecast lead times; and the MSB-based REPS shows higher skill than the original system, as determined by ensemble forecast verification.

Initial Dilution of A Vertical Round Non-Buoyant Jet in Wavy Cross-Flow Environment

The phenomenon of wastewater discharged into coastal waters can be simplified as a turbulent jet under the effect of waves and currents. Previous studies have been carried out to investigate the jet behaviors under the current only or the wave only environment. To obtain better understanding of the jet behaviors in a realistic situation, a series of physical experiments on the initial dilution of a vertical round jet in the wavy cross-flow environment are conducted. The diluted processes of the jet are recorded by a high-resolution camcorder and the concentration fields of the jet are measured with a peristaltic suction pumping system. When the jet is discharged into the wavy cross-flow environment, a distinctive phenomenon, namely ＂effluent clouds＂, is observed. According to the quantitative measurements, the jet width in the wavy cross-flow environment increases more significantly than that does in the cross-flow only environment, indicating that the waves impose a positive effect on the enhancement of jet initial dilution. In order to generalize the experimental findings, a comprehensive velocity scale ua and a characteristic length scale l are introduced. Through dimensional analysis, it is found that the dimensionless centerline concentration trajectories cy/l is in proportion to 1/3 power of the dimensionless downstream distance x/l, and the dimensionless centerline dilution 2c aS Q/（u l） is proportional to the square of the dimensionless centerline trajectory cy/l. Several empirical equations are then derived by using the Froude number of cross-flow Frc as a reference coefficient. This paper provides a better understanding and new estimations of the jet initial dilution under the combined effect of waves and cross-flow current.

Improving convergence of incremental harmonic balance method using homotopy analysis method

We have deduced incremental harmonic balance an iteration scheme in the （IHB） method using the harmonic balance plus the Newton-Raphson method. Since the convergence of the iteration is dependent upon the initial values in the iteration, the convergent region is greatly restricted for some cases. In this contribution, in order to enlarge the convergent region of the IHB method, we constructed the zeroth-order deformation equation using the homotopy analysis method, in which the IHB method is employed to solve the deformation equation with an embedding parameter as the active increment. Taking the Duffing and the van der Pol equations as examples, we obtained the highly accurate solutions. Importantly, the presented approach renders a convenient way to control and adjust the convergence.

Stability analysis of ellipse- like suspen-dome structures with low rise-span ratio

To investigate the effects of initial geometric imperfection and material nonlinearity on the stability analysis of the suspen-dome, the steel roof of Jiangsu Culture Sports Center Gymnasium was utilized as a numerical model, and modal analyses were performed. Then, linear buckling analysis,geometric nonlinear stability analysis, geometric nonlinear stability analysis with initial imperfection, and double nonlinear analysis considering material nonlinearity and geometric nonlinearity were discussed in detail to compare the stability performance of the ellipse-like suspen-dome and the single-layer reticulated shell. The results showthat the cable-strut system increases the integrity of the suspen-dome, and moderates the sensibility of the single-layer reticulated shell to initial geometric imperfection. However, it has little influence on integral rigidity, fundamental vibration frequencies, linear ultimate live loads, and geometric nonlinear ultimate live loads without initial imperfection. When considering the material nonlinearity and initial imperfection, a significant reduction occurs in the ultimate stability capacities of these two structures. In this case, the suspen-dome with a lowrise-span ratio is sensitive to the initial imperfection and material nonlinearity. In addition, the distribution pattern of live loads significantly influences the instability modes of the structure, and the uniform live load with full span is not always the most dangerous case.

Effect of partial remelting time on the initial carbide in semisolid structure of hypereutectic high Cr cast iron

In order to review the effect of partial remelting time on the morphology of initial carbides, semisolid ingots of hypereutectic high Cr17 cast iron were remelted at 1270℃ for four different times, and the changing characteristics of shape factor and the equivalent diameter of initial carbides were analyzed quantitatively using a Leica image analyzer. The results indicate that firstly, the evolution process of the initial carbides' morphology undergoes melting, spheroidization and refining during the partial remelting; secondly, the solute diffusion and interface tension take dominant roles at the primary and the middle-final stages respectively in the process of initial carbide evolution; finally, a perfect structure can be obtained by remelting semisolid ingots at 1270℃ for 15 min.

Solution Method for Singular Initial Value Problems of One-dimensional Steady Transonic Flow in a Dual-mode Scramjet

Singular initial value problems arise in solving one-dimensional steady transonic flow of dualmode scramjet. The existing solution method has the problems of large initial value errors in principles. This paper puts forward an improved algorithm based on variable transformation, and constructs a nonsingular one-dimensional steady transonic flow equation by defining a new variable. The improved algorithm can eliminate the singularity of the differential equation, and can solve the singular initial value problems of one-dimensional steady transonic flow of dual-mode scramjet.