In a bid to establish a strong scientific and technological (S&T) innovation base in China, the State S&T leading group, the top government organ for S&T issues, gave the go-ahead, on June 6,1998, for the ...In a bid to establish a strong scientific and technological (S&T) innovation base in China, the State S&T leading group, the top government organ for S&T issues, gave the go-ahead, on June 6,1998, for the Chinese Academy of Sciences (CAS) to introduce a pilot project for the national knowledge innovation program (KIP). The objective of the pilot project is to re-structure the Academy into three major bases:展开更多
Phosphate-bonded investments have already been widely utilized in dental restoration and micro-casting of artistic products for its outstanding rapid setting and high strength. However, the rapid setting rate of inves...Phosphate-bonded investments have already been widely utilized in dental restoration and micro-casting of artistic products for its outstanding rapid setting and high strength. However, the rapid setting rate of investment slurry has up to now been a barrier to extend the use of such slurry in preparation of medium-sized ceramic moulds. This paper proposes a new process of rapid fabrication of magnesia-phosphate-bonded investment ceramic moulds for medium-sized superalloy castings utilizing bauxite and mullite as refractory aggregates. In order to determine the properties of magnesia-phosphate-bonded bauxite-mullite investments (MPBBMI), a series of experiments were conducted, including modifciation of the workable time of slurry by liquid(mL)/powder(g)(L/P) ratio and addition of boric acid as retard agent and sodium tri-polyphosphate (STP) as strengthening agent, and adjustment of bauxite (g)/mullite(g)(B/M) ratio for mechanical strength. Mechanical vibration was applied to improve initial setting time and fluidity when pouring investment slurry; then an intermediate size ceramic mould for superalloy castings was manufactured by means of this rapid preparing process with MPBBMI material. The results showed that the MPBBMI slurry exhibits proper initial setting time and excellent fluidity when the L/P ratio is 0.64 and the boric acid content is 0.88wt.%. The fired specimens made from the MPBBMI material demonstrated adequate compression strength to withstand impact force of molten metal when the B/M ratio is 0.89 and the STP content is 0.92wt.%. The experimental results confirmed the feasibility of the proposed rapid fabricating process for medium-sized ceramic moulds with MPBBMI material by appropriate measures.展开更多
The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also ...The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also conducted to investigate the four main factors： water-cementing materials ratio, water content, content of superplasticizers （SP） and fly ash content. It was found that the requirement for setting time played the dominant role in shrinkage and anti-cracking, and fly ash played a critical role in workability and reducing heat of hydration but showed insignificant effects on slump, early strength and initial setting time of concrete.展开更多
文摘In a bid to establish a strong scientific and technological (S&T) innovation base in China, the State S&T leading group, the top government organ for S&T issues, gave the go-ahead, on June 6,1998, for the Chinese Academy of Sciences (CAS) to introduce a pilot project for the national knowledge innovation program (KIP). The objective of the pilot project is to re-structure the Academy into three major bases:
文摘Phosphate-bonded investments have already been widely utilized in dental restoration and micro-casting of artistic products for its outstanding rapid setting and high strength. However, the rapid setting rate of investment slurry has up to now been a barrier to extend the use of such slurry in preparation of medium-sized ceramic moulds. This paper proposes a new process of rapid fabrication of magnesia-phosphate-bonded investment ceramic moulds for medium-sized superalloy castings utilizing bauxite and mullite as refractory aggregates. In order to determine the properties of magnesia-phosphate-bonded bauxite-mullite investments (MPBBMI), a series of experiments were conducted, including modifciation of the workable time of slurry by liquid(mL)/powder(g)(L/P) ratio and addition of boric acid as retard agent and sodium tri-polyphosphate (STP) as strengthening agent, and adjustment of bauxite (g)/mullite(g)(B/M) ratio for mechanical strength. Mechanical vibration was applied to improve initial setting time and fluidity when pouring investment slurry; then an intermediate size ceramic mould for superalloy castings was manufactured by means of this rapid preparing process with MPBBMI material. The results showed that the MPBBMI slurry exhibits proper initial setting time and excellent fluidity when the L/P ratio is 0.64 and the boric acid content is 0.88wt.%. The fired specimens made from the MPBBMI material demonstrated adequate compression strength to withstand impact force of molten metal when the B/M ratio is 0.89 and the STP content is 0.92wt.%. The experimental results confirmed the feasibility of the proposed rapid fabricating process for medium-sized ceramic moulds with MPBBMI material by appropriate measures.
基金Funded by the National Natural Science Foundation of China(51409202)the Fundamental Research Funds for the Central Universities(2013-IV-36)the Jiangxi Provincial Project of Science and Technology(20132GGB70107)
文摘The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also conducted to investigate the four main factors： water-cementing materials ratio, water content, content of superplasticizers （SP） and fly ash content. It was found that the requirement for setting time played the dominant role in shrinkage and anti-cracking, and fly ash played a critical role in workability and reducing heat of hydration but showed insignificant effects on slump, early strength and initial setting time of concrete.
