Numerical Simulation of Asphaltene Precipitation and Deposition during Natural Gas and CO_(2) Injection

Asphaltene deposition is a significant problem during gas injection processes,as it can block the porous medium,the wellbore,and the involved facilities,significantly impacting reservoir productivity and ultimate oil recovery.Only a few studies have investigated the numerical modeling of this potential effect in porous media.This study focuses on asphaltene deposition due to natural gas and CO_(2) injection.Predictions of the effect of gas injection on asphaltene deposition behavior have been made using a 3D numerical simulation model.The results indicate that the injection of natural gas exacerbates asphaltene deposition,leading to a significant reduction in permeability near the injection well and throughout the reservoir.This reduction in permeability strongly affects the ability of gas toflow through the reservoir,resulting in an improvement of the displacement front.The displacement effi-ciency of the injection gas process increases by up to 1.40%when gas is injected at 5500 psi,compared to the scenario where the asphaltene model is not considered.CO_(2) injection leads to a miscible process with crude oil,extracting light and intermediate components,which intensifies asphaltene precipitation and increases the viscosity of the remaining crude oil,ultimately reducing the recovery rate.

Cross-upgrading of biomass hydrothermal carbonization and pyrolysis for high quality blast furnace injection fuel production:Physicochemical characteristics and gasification kinetics analysis

The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.

Wetting front migration model of ion-adsorption rare earth during the multi-hole unsaturated liquid injection

In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.

Tofacitinib combined with local low-dose ixekizumab injection benefits those with peripheral psoriatic arthritis

Dear Editor,Treating psoriatic arthritis(PsA)is always difficult.Systemic treatments can be administered either orally or through intramuscular and intra-articular injection,including conventional synthetics,biologics and targeted synthetic disease-modifying antirheumatic drugs[1].The alternatives,topical external therapies,are not effective on joint lesions due to drug permeability issues.Drugs injected into the articular cavity are also unsuitable for small peripheral joint lesions,the most common manifestations of PsA.The limited treatment options for PsA present a challenge.

Does HSP27 injection induce glaucoma damage in mice?

In a further aging society,excellent eyesight is an integral part of overall well-being and quality of life.Preserving good vision is crucial to maintaining mobility,independence,and mental health.There can be several reasons for visual impairment in elderly people,these include age-related macular degeneration,the leading cause of vision loss among older adults,cataract,glaucoma,diabetic retinopathy,retinal detachment,and others.

Background diseases and the number of previous intravitreal aflibercept injections on immediate intraocular pressure increase and vitreous reflux rate in phakic eyes

●AIM:To evaluate the effect of background diseases and number of previous intravitreal aflibercept injections(IVAIs)on immediate intraocular pressure(IOP)increase and vitreous reflux(VR)rate and to evaluate the correlation of both age and axial length with immediate IOP increase and VR rate.●METHODS:This study included 105 patients with cystoid macular edema secondary to retinal vein occlusion,35 patients with diabetic macular edema,69 patients with neovascular age-related macular degeneration(nAMD),and 12 patients with myopic choroidal neovascularization,which underwent first-time IVAI.The correlation of immediate IOP increase and VR rates with the four background diseases was investigated.Moreover,the correlation of age with immediate IOP increase and VR rate as well as correlation of axial length with immediate IOP increase and VR rate were evaluated.Further,54 patients with nAMD were treated with IVAI>10 times(multiple IVAIs).Moreover,the correlation of immediate IOP increase and VR rates with first-time and multiple IVAIs in nAMD was determined.●RESULTS:The immediate IOP increase(P=0.16)and VR rates(P=0.50)were almost similar among the four background diseases.The immediate postinjection IOP and age,VR rate and age,immediate postinjection IOP and axial length,or VR rate and axial length were not correlated in the four background diseases.The immediate IOP increase(P=0.66)and VR rates(P=0.28)did not significantly differ between first-time and multiple IVAIs in nAMD.●CONCLUSION:Background diseases and number of previous IVAIs have no effect on immediate IOP increase and VR rate.Further,age and axial length have no correlation on immediate IOP increase and VR rate.

A New Heat Transfer Model for Multi-Gradient Drilling with Hollow Sphere Injection

Multi-gradient drilling is a new offshore drilling method.The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise control of the wellbore pressure.In this study,a new heat transfer model is proposed by which the variable mass flow is properly taken into account.Using this model,the effects of the main factors influencing the wellbore temperature are analyzed.The results indicate that at the position where the separation injection device is installed,the temperature increase of the fluid in the drill pipe is mitigated due to the inflow/outflow of hollow spheres,and the temperature drop of the fluid in the annulus also decreases.In addition,a lower separation efficiency of the device,a shallower installation depth and a smaller circulating displacement tend to increase the temperature near the bottom of the annulus,thereby helping to reduce the hydrate generation area and playing a positive role in the prevention and control of hydrates in deepwater drilling.

Permanent Magnet Temperature Estimation for PMSMs Using Virtual Position-offset Injection

This paper proposes a virtual position-offset injection based permanent magnet temperature estimation approach for permanent magnet synchronous machines(PMSMs). The concept of virtual position-offset injection is mathematically transforming the machine model to a virtual frame with a position-offset. The virtual frame temperature estimation model is derived to calculate the permanent magnet temperature(PMT) directly from the measurements with computation efficiency. The estimation model involves a combined inductance term, which can simplify the establishment of saturation compensation model with less measurements. Moreover, resistance and inverter distorted terms are cancelled in the estimation model, which can improve the robustness to the winding temperature rise and inverter distortion. The proposed approach can achieve simplified computation in temperature estimation and reduced memory usage in saturation compensation. While existing model-based approaches could be affected by either the need of resistance and inverter information or complex saturation compensation. Experiments are conducted on the test machine to verify the proposed approach under various operating conditions.

Endoscopic ultrasound-guided lauromacrogol injection for treatment of colorectal cavernous hemangioma:Two case reports

BACKGROUND Colorectal cavernous hemangioma is a rare vascular malformation resulting in recurrent lower gastrointestinal hemorrhage,and can be misinterpreted as colitis.Surgical resection is currently the mainstay of treatment,with an emphasis on sphincter preservation.CASE SUMMARY We present details of two young patients with a history of persistent hematochezia diagnosed with colorectal cavernous hemangioma by endoscopic ultrasound(EUS).Cavernous hemangioma was relieved by several EUS-guided lauromacrogol injections and the patients achieved favorable clinical prognosis.CONCLUSION Multiple sequential EUS-guided injections of lauromacrogol is a safe,effective,cost-efficient,and minimally invasive alternative for colorectal cavernous hemangioma.

GUARDIAN: A Multi-Tiered Defense Architecture for Thwarting Prompt Injection Attacks on LLMs

This paper introduces a novel multi-tiered defense architecture to protect language models from adversarial prompt attacks. We construct adversarial prompts using strategies like role emulation and manipulative assistance to simulate real threats. We introduce a comprehensive, multi-tiered defense framework named GUARDIAN (Guardrails for Upholding Ethics in Language Models) comprising a system prompt filter, pre-processing filter leveraging a toxic classifier and ethical prompt generator, and pre-display filter using the model itself for output screening. Extensive testing on Meta’s Llama-2 model demonstrates the capability to block 100% of attack prompts. The approach also auto-suggests safer prompt alternatives, thereby bolstering language model security. Quantitatively evaluated defense layers and an ethical substitution mechanism represent key innovations to counter sophisticated attacks. The integrated methodology not only fortifies smaller LLMs against emerging cyber threats but also guides the broader application of LLMs in a secure and ethical manner.

Modified unilateral periureteral injection technique in the treatment of patients with high-grade vesicoureteral reflux: A study of primary findings

Objective:Although endoscopic treatment has been used by many pediatric urologists for the treatment of vesicoureteral reflux(VUR),it has no considerable success in high-grade VUR.We aimed to describe the primary outcomes of unilateral periureteral injection technique(PIT),as well as bilateral PIT in high-grade VUR.Methods:In this prospective study,we examined 92 ureters in 45 boys and 40 girls from February 2010 to May 2018.Bilateral PIT and unilateral PIT were applied in 67 and 25 refluxing units,respectively.In the unilateral PIT,the subureteral injection site was only at the 5-or 7-o’clock position.However,in the bilateral PIT,the subureteral injection sites were at 5-and 7-o’clock position.Pre-and post-operative reflux grades were evaluated by voiding cystourethrography 6 months after surgery.Results:Seven patients had bilateral reflux.Overall,75(81.5%)ureters showed Grade IV VUR,while 17(18.5%)had primary Grade V VUR.The mean age of the subjects was 39.2 months.In unilateral PIT ureters,VUR was resolved in 23(92.0%)refluxing units.It was downgraded to Grade III in one ureter(4.0%)and to Grade II in another ureter(4.0%).In addition,in bilateral PIT cases,VUR was resolved in 60(89.6%)ureters;it downgraded to Grades II and III in 3(4.5%)and 4(6.0%)refluxing units,respectively.Conclusion:Unilateral PIT can be highly effective in the treatment of selected ureters of high-grade VUR.However,further studies are needed to confirm our results.

Intramuscular vaccine administrations including the adoption of"Zeta-track technique"&"without aspiration slow injection technique"(ZTT&WASiT):a prospective review

Objective:To review the current literature on the practice of intramuscular injections(IMIs),focusing on immunizations.Methods:The present study comprises 2 reviews,characterized by high-quality evidence,per taining to the deployment of the slow injection technique without aspiration(referred to in this paper as the without-aspiration slow injection technique[WASi T])and combined with the Zeta-track technique(ZTT).The literature review is oriented toward the analysis of 2 features associated with IMIs techniques:safety and pain,integrating new evidence on vaccinee positioning for each muscle site and general relaxation techniques in the multi-parametric analysis.Results:The rigorous and in-depth reviews in the current study reveal the usefulness of including,among the international guidelines for via intramuscular immunizations,the adoption of WASi T only for compliant vaccinees,and in combination with all validated techniques for IMIs,and the use of ZTT limitedly if specific well-developed muscles are indicated.All the technique's limitations are exposed.Conclusions:Future research directions are presented by including the author's study designs to provide indirect evidence for the validity of the rationale of the slow injection technique using scientific methods,and for the conduction of future randomized controlled trials(RCTs)focused on revisiting the adoption of ZTT in a dynamic and integrated immunizations protocol in anterolateral thigh(ALT),ventrogluteal(VG),and also in the deltoid muscle,in the specific cases analyzed.

Optimization of Injection Parameters for Profile Control and Flooding in an Oilfield during High Water Cut Period

In order to improve the effect of water control and oil stabilization during high water cut period, a mathematical model of five point method well group was established with the high water cut well group of an Oilfield as the target area, the variation law of water cut and recovery factor of different injection parameters was analyzed, and the optimization research of injection parameters of polymer enhanced foam flooding was carried out. The results show that the higher the injection rate, the lower the water content curve, and the higher the oil recovery rate. As the foam defoamed when encountering oil, when the injection time was earlier than 80% of water cut, the later the injection time was, the better the oil displacement effect would be. When the injection time was later than 80% of water cut, the later the injection time was, the worse the oil displacement effect would be. The larger the injection volume, the lower the water content curve and the higher the recovery rate. After the injection volume exceeded 0.2 PV, the amplitude of changes in water content and recovery rate slowed down. The optimal injection parameters of profile control agent for high water content well group in Oilfield A were: injection rate of 15 m3/d, injection timing of 80% water content, and injection volume of 0.2 PV.

Layered injection technology for chemical flooding of Class-Ⅲ oil reservoirs in the Daqing Oil Fields complex,Songliao Basin,Northeast China

The Class-Ⅲ oil reservoirs of Lasaxing oilfield in the Daqing Oil Fields complex have geological oil reserves of 1.86 billion tonnes,an oil recovery of 39%,with remaining reserves accounting for more than 45%of the total geological reserves of the oilfield.Therefore,they have considerable potential for future oil production.The current layered injection technologies fail to achieve effective control over the low single-layer injection rates since they can only produce low throttle differential pressure under low injection rates(5-20 m^(3)/d).In this study,a symmetrically-structured double-offset-hole injection allocator and a novel throttling component were developed.Their spatial layout was constructed and mechanical parameters were optimized using finite element analysis,which allows for expanding the flow rate range at low injection rates.According to experimental results,the throttle differential pressure increased from 0.2 MPa to 0.8 MPa at an injection rate of 5 m^(3)/d,and the range of the single-layer flow rates expanded from 20-70 m^(3)/d to 5-70 m3/d.The field test results show that the effective production of oil layers with medium and low permeability was achieved and that the ratio of producing oil layer thickness to the total reservoir thickness increased by 9.7%on average.Therefore,this study provides valuable technical support for the effective chemical-flooding-based development of Class-Ⅲ oil reservoirs.

Optimization of the Algorithm for Increasing Injection Rate in Water Injection Wells for Pressure Optimization in P Oilfield

In today’s society, with the continuous growth of energy demand, Bohai Oilfield, as an important offshore oil resource base in China, is facing increasingly severe challenges while contributing to national energy security. In order to improve the quality of water injection in the oilfield and gradually achieve efficient and stable production, Bohai Oilfield has launched a water injection well pressure optimization project, focusing on improving the efficiency and quality of water injection in the water injection wells, in order to achieve the optimal water injection plan. In practical work, P Oilfield continues to promote the development of water injection well pressure optimization projects, emphasizing practical exploration and continuous optimization of work plans. However, during the project implementation process, there were some problems, one of which was that the statistics of cumulative injection volume were not scientific enough, resulting in a more comprehensive and accurate presentation of the actual results of pressure optimization work. In the context of continuous improvement work, after careful analysis and research, P Oilfield has decided to optimize the cumulative injection rate algorithm to guide the oilfield’s water injection work in a more refined way, ensuring sufficient and good water injection, and enhancing the oilfield’s production efficiency and comprehensive competitiveness.

Research on Optimization Design of Deep Profile Control Injection Scheme in Block S

In view of the rapid decline rate of oil production and gradual increase of water cut in oil wells in Block S, based on the determination of the formula of foam profile control agent, the optimization study of foam profile control injection scheme was carried out. Petrel software is used to establish a facies controlled geological model based on stochastic modeling method in Block S, and CMG software is used for numerical simulation to design 7 sets of foam profile control prediction schemes. Dynamic data and numerical simulation methods are used to optimize foam injection mode and injection cycle. By simulating and calculating, the optimal injection method of alternating gas and liquid injection and the optimal plan with an injection period of 2 months were selected. Through the calculation results of various research plans, it can be seen that the water content of the optimal plan has decreased significantly, and the oil production rate has increased significantly, in order to slow down production decline, control water content rise, extend the economic recovery period of the oilfield, and achieve the goal of improving oil recovery.

PhaseⅠstudy of chlorogenic acid injection for recurrent high-grade glioma with long-term follow-up

Objective:This study was aimed at analyzing the efficacy and safety of an injectable form of chlorogenic acid(CGA)in patients with recurrent high-grade glioma after standard of care treatments,through a first-in-human,open-label,dose-escalation phase I trial.Methods:A total of 26 eligible patients were enrolled,received intramuscular CGA injections at 5 dose levels,and were followed up for 5 years.CGA was well tolerated,and the maximum tolerated dose was 5.5 mg/kg.Results:The most common treatment-related adverse events occurred at the sites of injection.No grade 3 or 4 adverse events(e.g.,drug allergy)were reported for these patients except for induration at the injection sites.A clinical pharmacokinetic study showed that CGA was rapidly eliminated from the plasma,with a t_(1/2)of 0.95–1.27 h on day 1 and 1.19–1.39 h on day 30,and no detectable CGA was observed on days 9,11,13,23,25,27,and 29 before CGA administration.After the first treatment cycle,52.2%of patients(12 of 23)achieved stable disease.Long-term follow-up indicated an estimated median overall survival of 11.3 months for all 23 evaluable patients.Of the 18 patients with grade 3 glioma,the median overall survival was 9.5 months.Two patients remained alive at the cutoff day.Conclusions:This phase I study demonstrated that CGA has a favorable safety profile(with no severe toxicity),and provides preliminary clinical benefits for patients with high grade glioma relapsing after prior standard therapies,thus shedding light on the potential clinical application of CGA for recurrent grade 4 glioma.

Analysis of influencing factors of excitation parameters for magnetoacoustic tomography with current injection

Magneto-acoustic tomography with current injection(MAT-CI) is a type of hybrid imaging;under the excitation of the static magnetic field, the thermoacoustic effect and the Lorentz force effect will exist at the same time. Therefore,the detected signal is a mixed signal generated by the simultaneous action of the two effects, but the influence of excitation parameters on the two effects is different. In this paper, for objects with different conductivity, the proportion of thermoacoustic signal(TA) and magneto-acoustic signal(MA) in the mixed signal is quantitatively analyzed in terms of three aspects: the magnetic induction intensity, pulse excitation and injection current polarity. Experimental and simulation analyses show that the intensity ratio of MA to TA is not affected when the conductivity varies from 0.1 S/m to 1.5 S/m and other conditions remain unchanged. When the amplitude of the pulse excitation and the strength of the magnetic induction are different, the growth rates of MA and TA are different, which has a significant impact on the proportion of the two signals in the mixed signal. At the same time, due to the Lorentz force effect, MA is affected by the polarity of the injected current and the direction of the static magnetic field. The combination of the static magnetic field and the injected current can not only distinguish the two signals in the mixed signal, but also effectively enhance the intensity of the mixed signal and improve the quality of the reconstructed image.

Subretinal recombinant human tissue plasminogen activator injection using a 41G needle for the management of submacular hemorrhages:a 3-case report

Dear Editor,Submacular hemorrhage(SMH)is the accumulation of blood in the macular region caused by changes in retinal or choroidal circulation[1].SMH may be caused by age-related macular degeneration(AMD),pathological myopia,polypoid choroidal angiopathy(PCV)or retinal macroaneurysm[2].

Development and prospect of downhole monitoring and data transmission technology for separated zone water injection

This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptability and application status of traditional downhole data acquisition method,cable communications and testing technology,cable-controlled downhole parameter real-time monitoring communication method and downhole wireless communication technology are introduced in detail.Problems and challenges of existing technologies in downhole monitoring and data transmission technology are pointed out.According to the production requirement,the future development direction of the downhole monitoring and data transmission technology for separated zone water injection is proposed.For the large number of wells adopting cable measuring and adjustment technology,the key is to realize the digitalization of downhole plug.For the key monitoring wells,cable-controlled communication technology needs to be improved,and downhole monitoring and data transmission technology based on composite coiled tubing needs to be developed to make the operation more convenient and reliable.For large-scale application in oil fields,downhole wireless communication technology should be developed to realize automation of measurement and adjustment.In line with ground mobile communication network,a digital communication network covering the control center,water distribution station and oil reservoir should be built quickly to provide technical support for the digitization of reservoir development.