Analysis on Input-Output in Rice Cultivation Based on Cobb-Douglas Production Function

[Objective] To analyze the input and output in rice cultivation based on CD function. [Method] Based on the input factors, Cobb-Douglas production （CD） function was used to do the quantitative analysis on the input-output in rice production with rice growers as the objective. [Result] Considering the substitution effect of labor in- put and capital input, under the same technical conditions, the effect of increasing labor input on the rice production in per 667 m2 was negative, based on which 2 pieces of policy suggestions were put forward to promote the transfer of surplus la- bor force of rice growers and ensure the capital supply for rice production. [Conclusion] This study laid the foundation for the realization of reasonable allocation of rice production resources.

Agricultural Input and Output in Jiangsu Province with Case Analysis

[Objective] The aim was to explore interrelationship between agricultural input and output in Jiangsu and the influence degrees of input factors on agricultur-al output. [Method] Quantitative analysis and evaluation were made on agricultural input and output in Jiangsu during 1990-2012 as per factor analysis and regression analysis. [Result] The result of factor analysis showed that since the 1990s, the comprehensive efficiency of agricultural input/output in Jiangsu was growing and in-put/output of agriculture, forestry, animal husbandry and fishery, crop farming, and of food production were extracted, whose scores reflect the changes of input/output ef-ficiencies in terms of agriculture, forestry, animal husbandry, fishery, crop farming and food production in the two decades. The results of regression analysis indicated that the effects of the three indices on agricultural output tended to be volatile and the influence degrees were concluded also by regression parameters. [Conclusion] The research provides theoretical references for agricultural input/output structure in Jiangsu Province.

Grey analysis of the relationship between grain output and major input factor in Guizhou Province:1983-2005

Because conditions for the grain production are not favorable and the input in the production factors ofmodern agriculture is not sufficient, the grain supply has been less than the demand for a long time. By means of greycorrelation analysis, this paper deals with the correlation situation among such input factors as the grain sown area, thetotal power of agricultural machinery, the fertilizer utilization volume, the actual irrigation area, the damage area, thenumber of farming labor force, in order to understand the major restricting and driving forces that have affected thegrain output in the recent 23 years. The analysis shows that the grain sown area and fertilizer utilization volume are thetwo most important leading factors that affect grain production in Guizhou Province, while the damage area and the totalpower of the farming-used machines are the following factors. Fertilizer utilization volume and the actual agriculturalmachinery and irrigation area are the two increasingly influential factors that affect grain production. The influence of thefarming labor force upon grain production became less strong. The main measures to increase grain production outputin Guizhou Province are to stabilize the arable land, increase the actual irrigation area, expedite the transfer of thefarming labor force and increase the input of modern agriculture.

Environmental input-output model and its analysis with a focus on the solid waste management sectors

An environmental input output model (EIOM) was introduced to the regional solid waste management sectors, which can reflect the direct and indirect relations between the environment and the regional economy development. Some details about how to use the EIOM was discussed. The EIOM was applied to the Changsha City in China. The example results indicate that much useful information related to the environment and the regional economy development can be gained from the solution of the EIOM. Thus, the EIOM can be used as a useful tool for the sustainable development planning including the solid waste management sectors.

Analysis of Input and Output of China's Agriculture Based on Canonical Correlation

I select effective irrigated area, consumption of agricultural chemical fertilizer, electricity consumed in rural areas, and total power of agricultural machinery as input variables of China's agriculture; I select grain, bean, tobacco, oil-bearing crop and fruit as output variables of China's agriculture. By using the data of China Statistical Yearbook in 2010, based on the analysis method of canonical correlation, I conduct research on the input and output of China's agriculture. The results show that consumption of chemical fertilizer has the biggest impact on the agricultural output of China, followed by the input of total power of agricultural machinery; the canonical variable of agricultural output of China is mainly impacted by grain, oil-bearing crop and fruit; in terms of the selected variables, the output increase of grain, oil-bearing crop and fruit in China arises from the input increase of agricultural chemical fertilizer and machinery, and there is high-degree correlation between the two. According to the conclusions, the policy suggestions are put forward as follows: gradually decrease consumption of chemical fertilizer; increase the use of modern agricultural machinery; increase agricultural irrigation input.

Input-output Efficiency of Elements of Urban Construction Land in Beijing: Empirical Analysis Based on Panel Data of Jurisdiction

Based on the Data Envelopment Analysis method,and by using CCR and BCC model,Super Efficiency model and Malmquist model guided by input efficiency,the input-output efficiency of elements of urban construction land in different jurisdictions of Beijing from 2005 to 2015 was studied.The results showed that there were obvious differences between input-output efficiency of elements of urban construction land in different jurisdictions of Beijing,among which the efficiency of the core area of capital,Yanqing District,Fangshan District and Huairou District was relatively high,while the efficiency of Daxing District,Fengtai District and Miyun District was relatively low.There was no obvious correlation between efficiency differentiation and location factors,which is mainly caused by whether the land use in each jurisdiction has scale effect,whether the technology is improved,whether the input is redundant and whether the output is insufficient.For the jurisdiction of inefficient land use,we should strengthen the consciousness of intensive land use,improve the technical level,appropriately reduce the redundancy of input elements,and pay attention to the output of social and ecological benefits.

Robust Regression Analysis with LR-Type Fuzzy Input Variables and Fuzzy Output Variable

In this paper, we propose a fuzzy linear regression model with LR-type fuzzy input variables and fuzzy output variable, the fuzzy extent of which may be different. Then we give the iterative solution of the proposed model based on the Weighted Least Squares estimation procedure. Some properties of the estimates are proved. We also define suitable goodness of fit index and its adjusted version useful to evaluate the performances of the proposed model. Based on the Least Median Squares-Weighted Least Squares (LMS-WLS) estimation procedure, we give robust estimation steps for the proposed model. Compared with the well-known fuzzy Least Squares method, the effectiveness of our model on reducing the outliers influence is shown by using two examples.

Assessing the Impacts of Final Demand on CO₂-eq Emissions in the Mexican Economy: An Input-Output Analysis

The aim of this paper is to analyze the Mexican energy system and its greenhouse gas (GHG) emissions for the year 2012 and to estimate a baseline scenario for 2026 using an input-output analysis. The elasticity of emissions with respect to national demand is calculated in order to identify the total and distributed effects of CO2 equivalent (CO2-eq) emissions. In this framework, the analysis evaluates the effects in the economy related to changes in individual sector demands, and, vice versa, the effect on individual sectors due to global changes in national demands. Results show that passenger and freight transport, power generation, iron and steel industry, chemical industry, air transportation and agriculture concentrate the largest potential for mitigation strategies, and also have important distributive effects on the Mexican economy. Results are evaluated under the mitigation strategies of industrial sector proposed by the Fifth Assessment Report of the IPCC.

The Theoretical Analysis of Communicative Language Teaching From the Perspective of Input, Output and Interaction

The study is to explore the underlying concepts that Communicative Language Teaching is based on. It mainly considers the developments in research focusing on the notions of input, output and interaction that have influenced this approach.

PERFORMANCE ANALYSIS OF ATM SWITCH FABRIC WITH COMBINED-INPUT/OUTPUT BUFFERING

This paper analyses the performance of the ATM switch fabric with Combined-Input/ Output Buffering(C-IOB) under two different service principles for the cells at the head of line (HOL) positions of input buffers: First Come First Service (FCFS)/Random Service(RS) for the set of HOL cells addressed to a given output port with different/same "age" (the waiting time at the HOL position) and Pure Random Service(PRS) for all HOL cells addressed to a given output port regardless of their "ages" while the Queue Loss (QL) transfer scheme is adopted for interaction between input and output buffers in the ATM switch fabric. The results obtained show that the C-IOB ATM switch fabric with PRS service policy and the QL transfer scheme is better than other buffering ATM switch fabrics.

Efficiency assessment of coal mine safety input by data envelopment analysis

In recent years improper allocation of safety input has prevailed in coal mines in China, which resulted in the frequent accidents in coal mining operation. A comprehensive assessment of the input efficiency of coal mine safety should lead to improved efficiency in the use of funds and management resources. This helps government and enterprise managers better understand how safety inputs are used and to optimize allocation of resources. Study on coal mine＇s efficiency assessment of safety input was con- ducted in this paper. A C^2R model with non-Archimedean infinitesimal vector based on output is established after consideration of the input characteristics and the model properties. An assessment of an operating mine was done using a specific set of input and output criteria. It is found that the safety input was efficient in 2002 and 2005 and was weakly efficient in 2003. However, the efficiency was relatively low in both 2001 and 2004. The safety input resources can be optimized and adjusted by means of projection theory. Such analysis shows that, on average in 2001 and 2004, 45% of the expended funds could have been saved. Likewise, 10% of the safety management and technical staff could have been eliminated and working hours devoted to safety could have been reduced by 12%. These conditions could have Riven the same results.

Decomposition Analysis on Direct Material Input and Dematerialization of Mining Cities in Northeast China

Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995–2004 and to analyze the demateri- alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro- leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco- nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min- ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources’ cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.

Reliability Analysis on Repairable System with Dual Input Closed-Loop Feedback Link Considering Shutdown Correlation Based on Goal Oriented Methodology

Goal oriented( GO) methodology is a kind of success oriented system reliability analysis method and has been used widely.The repairable system with dual input closed-loop feedback link( DICLFL) considering shutdown correlation didn't make reliability analysis accurately based on existing GO methodology. So, a reliability analysis method used to deal with DICLFL considering shutdown correlation is provided based on GO methodology.Firstly, a new operator, which is used to describe DICLFL considering shutdown correlation,whose number is 1,is created and named as Type 9C operator. And then,the formulas of type 9C operator are derived based on Markov process theory. Finally,the new method presented in this paper is adopted to conduct the reliability analysis of an electro-hydraulic servo speed control system. The analysis result is compared with those of Monte Carlo simulation and fault tree analysis( FTA). The comparison results show that this new reliability analysis method based on GO methodology is feasible and meaningful for reliability analysis of repairable systems with DICLFL considering shutdown correlation.Meantime,it will be useful for more other applications.

Topic Modelling and Sentimental Analysis of Students’Reviews

Globally,educational institutions have reported a dramatic shift to online learning in an effort to contain the COVID-19 pandemic.The fundamental concern has been the continuance of education.As a result,several novel solutions have been developed to address technical and pedagogical issues.However,these were not the only difficulties that students faced.The implemented solutions involved the operation of the educational process with less regard for students’changing circumstances,which obliged them to study from home.Students should be asked to provide a full list of their concerns.As a result,student reflections,including those from Saudi Arabia,have been analysed to identify obstacles encountered during the COVID-19 pandemic.However,most of the analyses relied on closed-ended questions,which limited student involvement.To delve into students’responses,this study used open-ended questions,a qualitative method(content analysis),a quantitative method(topic modelling),and a sentimental analysis.This study also looked at students’emotional states during and after the COVID-19 pandemic.In terms of determining trends in students’input,the results showed that quantitative and qualitative methods produced similar outcomes.Students had unfavourable sentiments about studying during COVID-19 and positive sentiments about the face-to-face study.Furthermore,topic modelling has revealed that the majority of difficulties are more related to the environment(home)and social life.Students were less accepting of online learning.As a result,it is possible to conclude that face-to-face study still attracts students and provides benefits that online study cannot,such as social interaction and effective eye-to-eye communication.

Robust Fault Detection and Isolation Based on Finite-frequency H__/H_∞ Unknown Input Observers and Zonotopic Threshold Analysis

This work proposes a robust fault detection and isolation scheme for discrete-time systems subject to actuator faults,in which a bank of H_/H∞ fault detection unknown input observers(UIOs) and a zonotopic threshold analysis strategy are considered. In observer design, finite-frequency H_ index based on the generalized Kalman-Yakubovich-Popov lemma and H∞ technique are utilized to evaluate worst-case fault sensitivity and disturbance attenuation performance, respectively. The proposed H_/H∞ fault detection observers are designed to be insensitive to the corresponding actuator fault only, but sensitive to others.Then, to overcome the weakness of predefining threshold for FDI decision-making, this work proposes a zonotopic threshold analysis method to evaluate the generated residuals. The FDI decision-making relies on the evaluation with a dynamical zonotopic threshold. Finally, numerical simulations are provided to show the feasibility of the proposed scheme.

Defected Ground Structure Multiple Input-Output Antenna For Wireless Applications

In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.

Concept Analysis: Emergency Department Crowding and Length of Stay before and after an Increase in Catchment Area

Several notable issues arise from overcrowding in an emergency department (ED) for both patients and staff. Longer wait times, higher ambulance diversion rates, longer stays, higher incidence of medical errors, higher rates of patient mortality, and greater harm to hospitals due to financial losses are some of these problems. Collaboration is crucial in the healthcare industry since it determines the team’s hourly performance in managing patient care. By using Walker and Avant’s (2011) concept analysis method, the author reviewed the literature to better understand ED crowding, to ensure that patients receive safe treatment in a timely manner, and to highlight best practices that can be identified through concept analysis and practice evaluations. In conducting this concept analysis, Walker and Avant’s framework was applied to examine the nature of the findings selected for the advancement of the concept. Everyone working in the ED, from those who determine policy to those on the front lines continually encounter new obstacles, but has little or no time to formulate fresh concepts or reconsider how ED treatment is provided. Overcrowding occurs when the number of patients requiring attention, awaiting transfer, or undergoing diagnosis and treatment exceeds the physical capacity of ED staff. If a clear plan is not in place to increase and improve services in proportion to a growing population, this situation will persist.

Analysis on the Seismic Response of Soil Slopes Based on the Multi-point Input Method

In general, the seismic response analysis in earthquake engineering assumes that the vibration parameters of the target and the contact surface of the external media are identical,i. e., single point input. However, earthquake energy has an attenuation phenomenon in wave propagation,so a wide range of soil slopes and the external medium contact surface of different input points on motion are not identical. If we consider single point input only, it may not correspond with reality, so it is necessary to carry out research on multi-point input methods. Based on the 2-D slope model,single-point input and multi-point input are performed respectively to analyze and compare their similarities and differences in the perspectives of the characteristics of seismic response of soil layer and plastic zone distribution to provide a reference for the seismic design of slopes. The results show that in the perspective of soil seismic response analysis,the peak acceleration output and peak velocity output under multi-point input are greater than the peak values under single point input at the same monitoring point,the peak appearing time is also earlier than that of the single point input; in terms of the plastic zone distribution,the multi-point effect is manifested as the presence of more obvious tensile shear failures; in the perspective of safety coefficient,the safety coefficient under each multi-point input is smaller than that of single point input,a difference of about 7 % or so. In summary,multi-point input is more reasonable and practical than single point input,so multi-point input should be considered in seismic design.