Controlling Chaotic Cscillations with Input-Output Linearization

In this paper, the nonlinear control of chaotic oscillations was investigated by using the input output linearization control method. The chaotic attitude of a kind of spacecraft was discussed. It is demonstrated that the input output linearization control law is the nonlinear version of the parametric open plus closed loop control law.

Application of Linear Model Predictive Control and Input-Output Linearization to Constrained Control of 3D Cable Robots

Cable robots are structurally the same as parallel robots but with the basic difference that cables can only pull the platform and cannot push it. This feature makes control of cable robots a lot more challenging compared to parallel robots. This paper introduces a controller for cable robots under force constraint. The controller is based on input-output linearization and linear model predictive control. Performance of input-output linearizing (IOL) controllers suffers due to constraints on input and output variables. This problem is successfully tackled by augmenting IOL controllers with linear model predictive controller (LMPC). The effecttiveness of the proposed method is illustrated by numerical simulation.

Robust Output Feedback Control for a Class of Nonlinear Systems with Input Unmodeled Dynamics

The robust global stabilization problem of a class of uncertain nonlinear systems with input unmodeled dynamics is considered using output feedback, where the uncertain nonlinear terms satisfy a far more relaxed condition than the existing triangulartype condition. Under the assumption that the input unmodeled dynamics is minimum-phase and of relative degree zero, a dynamic output compensator is explicitly constructed based on the nonseparation principle. An example illustrates the usefulness of the proposed method.

Observer design and output feedback stabilization for linear singular time-delay systems with unknown inputs

The design of a functional observer and reduced-order observer with internal delay for linear singular timedelay systems with unknown inputs is discussed. The sufficient conditions of the existence of observers, which are normal linear time-delay systems, and the corresponding design steps are presented via linear matrix inequality（LMI）. Moreover, the observer-based feedback stabilizing controller is obtained. Three examples are given to show the effectiveness of the proposed methods.

CONTROLLING CHAOTIC OSCILLATIONS OF VISCO-ELASTIC PLATESBY THE LINEARIZATION VIA OUTPUTFEEDBACK

Controlling chaotic oscillations of viscoelastic plates are investigated in this paper. Based on the exact linearization method in nonlinear system control theory, a nonlinear feedback control law is presented for a class of non_affine control systems. The mathematical model describing motion of nonlinear viscoelastic plates is established, and it is simplified by the Galerkin method. The phase space portrait and the power spectrum are employed to demonstrate chaos in the system. The deflection is treated as an output, and is controlled to given periodic goals.

Defected Ground Structure Multiple Input-Output Antenna For Wireless Applications

In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.

Output regulation of singular linear systems with input saturation by composite nonlinear feedback control

Composite nonlinear feedback （CNF） control techniquefor tracking control problems is extended to the output regulationproblem of singular linear systems with input saturation. A statefeedback CNF control law and an output feedback CNF controllaw are constructed respectively for the output regulation problemof singular linear systems with input saturation. It is shown thatthe output regulation problem by CNF control is solvable underthe same solvability conditions of the output regulation problemby linear control. However, with the virtue of the CNF control, thetransient performance of the closed-loop system can be improvedby carefully designing the linear part and the nonlinear part of theCNF control law. The design procedure and the improvement ofthe transient performance of the closed-loop system are illustratedwith a numerical simulation.

Tool Condition Monitoring Based on Nonlinear Output Frequency Response Functions and Multivariate Control Chart

Tool condition monitoring(TCM)is a key technology for intelligent manufacturing.The objective is to monitor the tool operation status and detect tool breakage so that the tool can be changed in time to avoid significant damage to workpieces and reduce manufacturing costs.Recently,an innovative TCM approach based on sensor data modelling and model frequency analysis has been proposed.Different from traditional signal feature-based monitoring,the data from sensors are utilized to build a dynamic process model.Then,the nonlinear output frequency response functions,a concept which extends the linear system frequency response function to the nonlinear case,over the frequency range of the tooth passing frequency of the machining process are extracted to reveal tool health conditions.In order to extend the novel sensor data modelling and model frequency analysis to unsupervised condition monitoring of cutting tools,in the present study,a multivariate control chart is proposed for TCM based on the frequency domain properties of machining processes derived from the innovative sensor data modelling and model frequency analysis.The feature dimension is reduced by principal component analysis first.Then the moving average strategy is exploited to generate monitoring variables and overcome the effects of noises.The milling experiments of titanium alloys are conducted to verify the effectiveness of the proposed approach in detecting excessive flank wear of solid carbide end mills.The results demonstrate the advantages of the new approach over conventional TCM techniques and its potential in industrial applications.

Nonlinear Systems Identification via an Input-Output Model Based on a Feedforward Neural Network

This paper develops a feedforward neural network based input output model for a general unknown nonlinear dynamic system identification when only the inputs and outputs are accessible observations. In the developed model, the size of the input space is directly related to the system order. By monitoring the identification error characteristic curve, we are able to determine the system order and subsequently an appropriate network structure for systems identification. Simulation results are promising and show that generic nonlinear systems can be identified, different cases of the same system can also be discriminated by our model.

Static Output Feedback H_∞ Controllers Design for Descriptor Linear Systems Based on LMI

This paper considers the design problem of static output feedback H ∞ controllers for descriptor linear systems with linear matrix inequality (LMI) approach. Necessary and sufficient conditions for the existence of a static output feedback H ∞ controller are given in terms of LMIs. Furthermore, the design method of H ∞ controllers is provided using the solutions to the LMIs.

Analysis on Input-Output in Rice Cultivation Based on Cobb-Douglas Production Function

[Objective] To analyze the input and output in rice cultivation based on CD function. [Method] Based on the input factors, Cobb-Douglas production （CD） function was used to do the quantitative analysis on the input-output in rice production with rice growers as the objective. [Result] Considering the substitution effect of labor in- put and capital input, under the same technical conditions, the effect of increasing labor input on the rice production in per 667 m2 was negative, based on which 2 pieces of policy suggestions were put forward to promote the transfer of surplus la- bor force of rice growers and ensure the capital supply for rice production. [Conclusion] This study laid the foundation for the realization of reasonable allocation of rice production resources.

基于Input-Output模型的新疆水资源合理配置研究

根据2007和2012年新疆统计年鉴和投入产出表等相关资料,利用Input-output模型和水资源结构偏差系数对国民经济各产业的用水效率、用水效益指数等进行了分析。研究表明:2012年新疆各产业水资源利用效率和效益显著提高,但农业用水消耗量远高于其产出效益,第三产业和生态环境产业的水资源消耗呈现递减趋势。此外,工业和建筑业的水资源配置较为合理。最后,为促进新疆水资源优化配置提出了相应的对策建议。

An Efficient MMI SOI Splitter with Multimode Input/Output Waveguides

A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.

Agricultural Input and Output in Jiangsu Province with Case Analysis

[Objective] The aim was to explore interrelationship between agricultural input and output in Jiangsu and the influence degrees of input factors on agricultur-al output. [Method] Quantitative analysis and evaluation were made on agricultural input and output in Jiangsu during 1990-2012 as per factor analysis and regression analysis. [Result] The result of factor analysis showed that since the 1990s, the comprehensive efficiency of agricultural input/output in Jiangsu was growing and in-put/output of agriculture, forestry, animal husbandry and fishery, crop farming, and of food production were extracted, whose scores reflect the changes of input/output ef-ficiencies in terms of agriculture, forestry, animal husbandry, fishery, crop farming and food production in the two decades. The results of regression analysis indicated that the effects of the three indices on agricultural output tended to be volatile and the influence degrees were concluded also by regression parameters. [Conclusion] The research provides theoretical references for agricultural input/output structure in Jiangsu Province.

On the Balance Between “Input” and “Output” in College English Teaching

The current college English teaching is usually associated with two discouraging words—"time-consuming"and"inefficient", which badly demands some urgent solutions. On the basis of Krashen's Input Hypothesis and Swain's Output Hypothesis, this paper elaborates the indispensable and critical roles respectively of input and output in language learning, and proposes a concept of balanced input and output in college English teaching. The paper also presents some personal suggestions as to how to bring the balance into teaching.

Input and Output Balance to Assist in Language Competence

Second Language Acquisition(SLA) education in China suffers from an imbalance between language input and output.Reading and listening are the dominate methods used in the classroom,while speaking and writing are used far less.This paper examines the results that are caused by this imbalanced development of comprehensible output and input.Alternative solutions are examined.The results show the limitations in students' abilities that are commonly based on the current methods of teaching.The implications are that policy makers,curriculum developers and teachers should strive to balance the amount of comprehensible input and output through various means.

语言学习过程中的“Input”和“Output”类课程特点分析

"Input"和"Output"作为语言学习和运用的两个主要方式,历来备受语言研究者和学习者的关注。因此,有关它们的理论著述和观点也颇多。但主要是如何就二者能很好的在中国英语外语环境中得以有效地应用和实践,如在高校英语专业课程群中得以很好的实施则显得非常必要和实用。将所有英语外语课程按照"Input"和"Output"进行分类并按照课程建模的方式进行课程教学和人才培养是本文讨论的主要任务。

From Input to Output-Exploring the Role of Intake in English Learning

This paper aims to explore the role of intake in second language learning.Based on her literature review and the case of an English lesson in a Chinese secondary school,the author argues that L2 acquisition does not take place directly from input to output.In each sqecific part of L2 acquisition process,intake plays various important roles such as filtering,facilitating in comprehensible input and processing in pushed output.In the Chinese foreign language teaching context,it is also found that L2 acquisition is an arduous task for learners to extract information from the input,utilize it in forming a grammar and produce target language forms accurately and fluently.It is the same with L2 teachers who need to play their roles of a controller,a corrector,an organizer and a prompter in the learning process.

Input and Output in Second Language Acquisition

Input and output are two major terminal actions in second language acquisition.For these two actions scholars have carried out a great number of researches.Among them the most famous are Krashen’s Input Hypothesis and Output Hypothesis.

The Study of Strategies in College English Translation Teaching from the Perspective of Input and Output Theory

Research on SLA gives highlights to English translation teaching. The second language acquisition is a cognitive process of understanding and outputting the second language by making use of strategies, which contains language input, learners' linguistic knowledge, and language output. This paper analyzes language input and output theory and then proposes that we should stress language input by practice and interaction and at the same time focus on the role of language output in college English translation teaching.