Development and prospect of acoustic reflection imaging logging processing and interpretation method

Acoustic reflection imaging logging technology can detect and evaluate the development of reflection anomalies,such as fractures,caves and faults,within a range of tens of meters from the wellbore,greatly expanding the application scope of well logging technology.This article reviews the development history of the technology and focuses on introducing key methods,software,and on-site applications of acoustic reflection imaging logging technology.Based on the analyses of major challenges faced by existing technologies,and in conjunction with the practical production requirements of oilfields,the further development directions of acoustic reflection imaging logging are proposed.Following the current approach that utilizes the reflection coefficients,derived from the computation of acoustic slowness and density,to perform seismic inversion constrained by well logging,the next frontier is to directly establish the forward and inverse relationships between the downhole measured reflection waves and the surface seismic reflection waves.It is essential to advance research in imaging of fractures within shale reservoirs,the assessment of hydraulic fracturing effectiveness,the study of geosteering while drilling,and the innovation in instruments of acoustic reflection imaging logging technology.

The multi-peak point phenomenon of broadband microwave reflection caused by inhomogeneous plasma

During spacecraft re-entry,the challenge of measuring plasma sheath parameters directly contributes to difficulties in addressing communication blackout.In this work,we have discovered a phenomenon of multiple peaks in reflection data caused by the inhomogeneous plasma.Simulation results show that the multi-peak points fade away as the characteristic frequency is approached,resembling a series of gradually decreasing peaks.The positions and quantities of these points are positively correlated with electron density,yet they show no relation to collision frequency.This phenomenon is of significant reference value for future studies on the spatial distribution of plasmas,particularly for using microwave reflection signals in diagnosing the plasma sheath.

The influence of reflections from the train body and the ground on the sound radiation from a railway rail

Purpose – The vibration of the rails is a significant source of railway rolling noise, often forming the dominantcomponent of noise in the important frequency region between 400 and 2000 Hz. The purpose of the paper is toinvestigate the influence of the ground profile and the presence of the train body on the sound radiation fromthe rail.Design/methodology/approach – Two-dimensional boundary element calculations are used, in which therail vibration is the source. The ground profile and various different shapes of train body are introduced in themodel, and results are observed in terms of sound power and sound pressure. Comparisons are also made withvibro-acoustic measurements performed with and without a train present.Findings – The sound radiated by the rail in the absence of the train body is strongly attenuated by shieldingdue to the ballast shoulder. When the train body is present, the sound from the vertical rail motion is reflectedback down toward the track where it is partly absorbed by the ballast. Nevertheless, the sound pressure at thetrackside is increased by typically 0–5 dB. For the lateral vibration of the rail, the effects are much smaller. Oncethe sound power is known, the sound pressure with the train present can be approximated reasonably well withsimple line source directivities.Originality/value – Numerical models used to predict the sound radiation from railway rails have generallyneglected the influence of the ground profile and reflections from the underside of the train body on the soundpower and directivity of the rail. These effects are studied in a systematic way including comparisons with measurements.

Graded and Quantitative Technology and Application of Coal-Bearing Reservoir Based on Seismic Reflection Characteristics

Taiyuan formation is the main exploration strata in Ordos Basin, and coals are widely developed. Due to the interference of strong reflection of coals, we cannot completely identify the effective reservoir information of coal-bearing reservoir on seismic data. Previous researchers have studied the reservoir by stripping or weakening the strong reflection, but it is difficult to determine the effectiveness of the remaining reflection seismic data. In this paper, through the establishment of 2D forward model of coal-bearing strata, the corresponding geophysical characteristics of different reflection types of coal-bearing strata are analyzed, and then the favorable sedimentary facies zones for reservoir development are predicted. On this basis, combined with seismic properties, the coal-bearing reservoir is quantitatively characterized by seismic inversion. The above research shows that the Taiyuan formation in LS block of Ordos Basin is affected by coals and forms three or two peaks in different locations. The reservoir plane sedimentary facies zone is effectively characterized by seismic reflection structure. Based on the characteristics of sedimentary facies belt and petrophysical analysis, the reservoir is semi quantitatively characterized by attribute analysis and waveform indication, and quantitatively characterized by pre stack geostatistical inversion. Based on the forward analysis of coal measure strata, this technology characterizes the reservoir facies belt through seismic reflection characteristics, and describes coal measure reservoirs step by step. It effectively guides the exploration of LS block in Ordos Basin, and has achieved good practical application effect.

Reflection on Designing of Ecological Landscape at Northern Villages

Aiming at a series of existing problems of ecological landscape in farmland and in residential district at northern villages,and problems like low recovery rate of wastes,uncertain evaluation index of ecological landscape,managers' low consciousnesses and insufficient organization and management at northern villages;the corresponding planning suggestions were proposed.Scientific farming,developing ecological agriculture and perfecting ecological corridor system were of great significance to ecological landscape of farmland.Reasonable ecological construction,fully utilizing renewable energy sources,overall planning,improving land utilization rate and highlighting regional characteristic of ecological landscape were of great significance to ecological landscape of residential district.Tourism agriculture development should be emphasized,ecological landscape theory study enhanced,administrative organization perfected and reasonable ecological evaluation carried out,respecting the principle of ecology,fully exploring regional characteristics,strengthening government's guidance and considering villagers' will,so as to construct a society in which man and nature were in harmony.

Effects of Sb content on structure and laser reflection performance of ATO nanomaterials

Antimony tin oxide （ATO） nano-particles doped with different Sb contents were prepared by co-precipitation method, using SnCl4·5H2O and SbCl3 as main raw materials. Microstructure, morphology and reflectivity curves were characterized by XRD, FESEM, UV-visible spectroscopy and laser, and the effects of Sb content on crystalline microstructure, crystal size and reflectivity curves of the ATO nano-particles were investigated systematically. The results show that the ATO nano-particles prepared by co-precipitation method have tetragonal rutile structure, with particle size distribution range of several decade nanometer. With the increase of Sb content, the grain size of ATO decreases, and the unit cell volume increases. Compared with the SnO2 particles without Sb, the 1.06 μm laser reflection of ATO nano-particles doped with Sb is obviously lower. With the increase of Sb content, the reflection increases first, then decreases;when the Sb content is 20%, 1.06μm laser reflection of ATO nano-particles is below 0.02%, and the laser reflection performance is the best.

Reflection on Rural Settlement Environmental Landscape of Mixed Living Areas of Multination in Xinjiang Province of China——A Case Study of Wuchang Region

As Xinjiang rural settlement planning has only paid attention to the completion of basic community functions but neglected landscape planning and shaping,strategies for sustainable development have been proposed by taking rural settlement landscape construction in mixed living areas of Wuchang for example.It should well deal with problems about nationalities and religious belief,solve the contradiction between traditional life and production mode and modern standardized agricultural life and production mode,promote the maximization of settlement landscape function,coordinate the relation between settlement landscape and natural environment,make settlement landscape correspond with traditional geomancy,construct definite landscape position and create regional landscape feature.Finally,in view of the design and renovation of settlement landscape,it has proposed respecting local natural geological condition,respecting current settlement pattern and layout,avoiding rebuilding new villages,and founding a"Settlement Landscape Construction and Development Autonomous Committee".

A Novel Method of Nanocontact Fabrication for Andreev Reflection Measurement

A new method of nanocontact fabrication for Adreev reflection measurement based on the nanopore method using a SiN membrane with focused ion beam technique is presented. With this method, controllable, clean,tensionless nano-contacts for spin polarization probing can be obtained. Measurements of the fabricated samples show complicated spectral structures with a zero bias anomaly and dip structures from quasipartical interactions. A control sample of Co40Fe40B20 is measured with Nb tip method. None of the measured spectra can be explained satisfactorily by present theory. Further analysis of the contact interface and a more complete theory are needed to extract a reliable spin polarization message with the point contact Andreev reflection method.

Planetary Wave Reflection and Its Impact on Tropospheric Cold Weather over Asia during January 2008

Reflection of stratospheric planetary waves and its impact on tropospheric cold weather over Asia during January 2008 were investigated by applying two dimensional Eliassen-Palm （EP） flux and three-dimensional Plumb wave activity fluxes.The planetary wave propagation can clearly be seen in the longitude-height and latitude-height sections of the Plumb wave activity flux and EP flux,respectively,when the stratospheric basic state is partially reflective.Primarily,a wave packet emanating from Baffin Island/coast of Labrador propagated eastward,equatorward and was reflected over Central Eurasia and parts of China,which in turn triggered the advection of cold wind from the northern part of the boreal forest regions and Siberia to the subtropics.The wide region of Central Eurasia and China experienced extreme cold weather during the second ten days of January 2008,whereas the extraordinary persistence of the event might have occurred due to an anomalous blocking high in the Urals-Siberia region.

Reflection and transmission of bottom simulating reflectors in gas hydrate-bearing sediments: Two-phase media models

The bottom simulating reflector （BSR） in gas hydrate-bearing sediments is a physical interface which is composed of solid, gas, and liquid and is influenced by temperature and pressure. Deep sea floor sediment is a porous, unconsolidated, fluid saturated media. Therefore, the reflection and transmission coefficients computed by the Zoeppritz equation based on elastic media do not match reality. In this paper, a two-phase media model is applied to study the reflection and transmission at the bottom simulating reflector in order to find an accurate wave propagation energy distribution and the relationship between reflection and transmission and fluid saturation on the BSR. The numerical experiments show that the type I compressional （fast） and shear waves are not sensitive to frequency variation and the velocities change slowly over the whole frequency range. However, type II compressional （slow） waves are more sensitive to frequency variation and the velocities change over a large range. We find that reflection and transmission coefficients change with the amount of hydrate and free gas. Frequency, pore fluid saturation, and incident angle have different impacts on the reflection and transmission coefficients. We can use these characteristics to estimate gas hydrate saturation or detect lithological variations in the gas hydrate-bearing sediments.

Teaching for Learning Styles and Multiple Intelligences: a Personal Reflection

The paper reviewed what the literature has said about learning styles and multiple intelligences. By practicing a personal reflection on learning styles and multiple intelligences, the paper indicated that teachers need make paradigm shift respecting the fact that every student is gifted and can be taught with the same contents, approaches and assessment. Teaching for diversity should be implemented.

Theoretical analysis of JMC effect on stress wave transmission and reflection

Taking the joint matching coefficient(JMC) which represents the contact area ratio of the joint in rock masses as the key parameter, a one-dimensional contacted interface model(CIM-JMC) was established in this study to describe the wave propagation across a single joint. According to this model, the reflected and transmitted waves at the joint were obtained, and the energy coefficients of reflection and transmission were calculated. Compared with the modified Split Hopkinson pressure bar(SHPB) experiment, it was validated by taking the incident wave of the SHPB test as the input condition in the CIM-JMC, and the reflected and transmitted waves across the joint were calculated by the model. The effects of four sets of JMCs(0.81, 0.64, 0.49, and 0.36) on the transmission and reflection of the stress wave propagation across the joint were analyzed and compared with the experimental results. It demonstrated that the values of CIM-JMC could represent both the transmission and reflection of the stress wave accurately when JMC > 0.5, but could relatively accurately represent the reflection rather than the transmission when JMC < 0.5. By contrasting energy coefficients of joints with different JMCs, it was revealed that energy dissipated sharply along the decrease of JMC when JMC > 0.5.

Critical emancipatory reflection on a practice-based issue in relation to the working relationship between doctors and nurses in China

Objective: Reflection is viewed as the most significant skill and should be advocated for lifelong learning. In order to grasp the process of reflection and embrace the reflective skill, one of the authors of this paper reflects on a practice-based issue in relation to the communication between doctors and nurses, to gain new understanding and thus improve the authors' clinical practice.Methods: Smyth's framework with four stages is utilized as an ideal framework to guide the author's reflection on the practice-based issue to free the author from her entrenched assumptions and the oppressive forces that limit her practice.Results: The espoused and enacted theory, together with the critical reflection theory, are used to explore the values and beliefs that essentially govern the author's practice and how these are distinct from the author's worldviews. Following this, critical emancipatory reflection is undertaken to explore the dominant power structures within the author's workplace. Furthermore, given the hegemonic and chaotic working context of this issue, hegemony and symbolic interaction theory are applied to unearth the various hidden constraining and oppressive forces. Additionally, socialization theory is utilized to help the author achieve professional identity.Conclusions: Reconstructing the practice-based issue empowers the author to realize that in the future, she should act as a reflective practitioner, creating a daily habit, staying alert to practice, seeing things freshly, finding support systems, improving communication skills, conducting reflective research, and reifying reflective practice. Ultimately, the author will be sufficiently equipped to be able to transform her practice and change its outcomes.

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.

Reflection and transmission of elastic waves through a couple-stress elastic slab sandwiched between two half-spaces

The reflection and transmission of elastic waves through a couple-stress elastic slab that is sandwiched between two couple-stress elastic half-spaces are studied in this paper. Because of the couple-stress effects, there are three types of elastic waves in the couple-stress elastic solid, two of which are dispersive. The interface conditions between two couple-stress solids involve the surface couple and rotation apart from the surface traction and displacement. The nontraditional interface conditions between the slab and two solid half-spaces are used to obtain the linear algebraic equation sets from which the amplitude ratios of reflection and transmission waves to the incident wave can be determined. Then,the energy fluxes carried by the various reflection and transmission waves are calculated numerically and the normal energy flux conservation is used to validate the numerical results. The special case, couple-stress elastic slab sandwiched by the classical elastic half-spaces, is also studied and compared with the situation that the classical elastic slab sandwiched by the classical elastic half-spaces. Incident longitudinal wave(P wave) and incident transverse wave(SV wave) are both considered. The influences of the couplestress are mainly discussed based on the numerical results.It is found that the couple-stress mainly influences the transverse modes of elastic waves.

Advancing the quality of care and nursing practice through emancipatory reflection

Reflection is a fundamental skill of health-care professionals and plays an important role in ensuring the quality of care in health-care practice. It is believed that undertaking reflection in practice can help nurses develop an awareness of a sense of personal power and agency, cultivate their critical thinking ability and help them promote their professional development. However, reflection has not been introduced widely as a nursing curriculum in China, and literature shows that some clinical nurses lack critical thinking skills and critical reflective practice skills by reason of not receiving systematic education on reflection when they were at nursing college.Therefore, we present a series of seven articles focused on prevalent and interesting practice-based events to reflect on in this special issue. The main aim is to disseminate reflective methodology and techniques and present examples of reflective writing for nurses.It is expected that these articles will help to lead Chinese nurses to adopt critical emancipatory reflective processes to bring about transformative actions.

Reflection and transmission of seismic waves at an interface betwen two saturated soils

Based on the modified Biot model for asturated soils, taking the compressibilities of the grains and the pore fluid as well as the viscous coupling into account, the reflection and transmission of seismic aves at an interface between two saturated soils are studied in this paper. A formula is derived for calculation of the amplitude reflection and transmission coefficients of various waves. A aumerical investigation of the dependence of the coefficients on the angle of incidence and the frequency is performed. This study is of a value for seismological studies and geophysical exploration.

Reflection and Transmission of Regular Waves from/Through Single and Double Perforated Thin Walls

In this paper, reflection and transmission coefficients of regular waves from/through perforated thin walls are investigated. Small scale laboratory tests have been performed in a wave flume firstly with single perforated thin Plexiglas plates of various porosities. The plate is placed perpendicular to the flume with the height from the flume bottom to the position above water surface. With this thin wall in the flume wave overtopping is prohibited and incident waves are able to transmit. The porosities of the walls are achieved by perforating the plates with circular holes. Model settings with double perforated walls parallel to each other forming so called chamber system, have been also examined. Several parameters have been used for correlating the laboratory tests’ results. Experimental data are also compared with results from the numerical model by applying the multi-domain boundary element method （MDBEM） with linear wave theory. Wave energy dissipation due to the perforations of the thin wall has been represented by a simple yet effective porosity parameter in the model. The numerical model with the MDBEM has been further validated against the previously published data.

Application of Spectral Angle Mapper Classification to Discriminate Hydrothermal Alteration in Southwest Birjand, Iran, Using Advanced Spaceborne Thermal Emission and Reflection Radiometer Image Processing

The purpose of this study is to evaluate the Spectral Angle Mapper （SAM） classification method for determining the optimum threshold （maximum spectral angle） to unveil the hydrothermal mineral assemblages related to mineral deposits. The study area indicates good potential for Cu-Au porphyry, epithermal gold deposits and hydrothermal alteration well developed in arid and semiarid climates, which makes this region significant for Advanced Spaceborne Thermal Emission and Reflection Radiometer （ASTER） image processing analysis. Given that achieving an acceptable mineral mapping requires knowing the alteration patterns, petrochemistry and petrogenesis of the igneous rocks while considering the effect of weathering, overprinting of supergene alteration, overprinting of hypogene alteration and host rock spectral mixing, SAM classification was implemented for argillic, sericitic, propylitic, alunitization, silicification and iron oxide zones of six previously known mineral deposits： Maherabad, a Cu-Au porphyry system; Sheikhabad, an upper part of Cu-Au porphyry system; Khoonik, an Intrusion related Au system; Barmazid, a low sulfidation epithermal system; Khopik, a Cu-Au porphyry system; and Hanish, an epithermal Au system. Thus, the investigation showed that although the whole alteration zones are affected by mixing, it is also possible to produce a favorable hydrothermal mineral map by such complementary data as petrology, petrochemistry and alteration patterns.

Seismic reflection and transmission coefficients of a single layer sandwiched between two dissimilar poroelastic solids

The seismic reflection and transmission characteristics of a single layer sandwiched between two dissimilar poroelastic solids saturated with two immiscible viscous fluids are investigated. The sandwiched layer is modeled as a porous solid with finite thickness. The propagation of waves is represented with potential functions. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. Due to the presence of viscosity in pore fluids, the reflected and transmitted waves are inhomogeneous in nature, i.e., with different directions of propagation and attenuation. The closed-form analytical expressions for reflection and transmission coefficients are derived theoretically for appropriate boundary conditions. These expressions are calculated as a non-singular system of linear algebraic equations and depend on the various parameters involved in this non-singular system. Hence,numerical examples are studied to determine the effects of various properties of the sandwich layer on reflection and transmission coefficients. The essential features of layer thickness, incident direction, wave frequency, liquidsaturation and capillary pressure of the porous layer on reflection and transmission coefficients are depicted graphically and discussed. The analysis shows that reflection and transmission coefficients are strongly associated with incident direction and various properties of the porous layer.