Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosph...Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)aims to capture two-dimensional(2-D)images of the Earth’s magnetosheath by using soft X-ray imaging.However,the observed 2-D images are affected by many noise factors,destroying the contained information,which is not conducive to the subsequent reconstruction of the three-dimensional(3-D)structure of the magnetopause.The analysis of SXI-simulated observation images shows that such damage cannot be evaluated with traditional restoration models.This makes it difficult to establish the mapping relationship between SXIsimulated observation images and target images by using mathematical models.We propose an image restoration algorithm for SXIsimulated observation images that can recover large-scale structure information on the magnetosphere.The idea is to train a patch estimator by selecting noise–clean patch pairs with the same distribution through the Classification–Expectation Maximization algorithm to achieve the restoration estimation of the SXI-simulated observation image,whose mapping relationship with the target image is established by the patch estimator.The Classification–Expectation Maximization algorithm is used to select multiple patch clusters with the same distribution and then train different patch estimators so as to improve the accuracy of the estimator.Experimental results showed that our image restoration algorithm is superior to other classical image restoration algorithms in the SXI-simulated observation image restoration task,according to the peak signal-to-noise ratio and structural similarity.The restoration results of SXI-simulated observation images are used in the tangent fitting approach and the computed tomography approach toward magnetospheric reconstruction techniques,significantly improving the reconstruction results.Hence,the proposed technology may be feasible for processing SXI-simulated observation images.展开更多
Acoustic models of railway vehicles in standstill and pass-by conditions can be used as part of a virtual certification process for new trains.For each piece of auxiliary equipment,the sound power measured on a test b...Acoustic models of railway vehicles in standstill and pass-by conditions can be used as part of a virtual certification process for new trains.For each piece of auxiliary equipment,the sound power measured on a test bench is combined with meas-ured or predicted transfer functions.It is important,however,to allow for installation effects due to shielding by fairings or the train body.In the current work,fast-running analytical models are developed to determine these installation effects.The model for roof-mounted sources takes account of diffraction at the corner of the train body or fairing,using a barrier model.For equipment mounted under the train,the acoustic propagation from the sides of the source is based on free-field Green’s functions.The bottom surfaces are assumed to radiate initially into a cavity under the train,which is modelled with a simple diffuse field approach.The sound emitted from the gaps at the side of the cavity is then assumed to propagate to the receivers according to free-field Green’s functions.Results show good agreement with a 2.5D boundary element model and with measurements.Modelling uncertainty and parametric uncertainty are evaluated.The largest variability occurs due to the height and impedance of the ground,especially for a low receiver.This leads to standard deviations of up to 4 dB at low frequencies.For the roof-mounted sources,uncertainty over the location of the corner used in the equivalent barrier model can also lead to large standard deviations.展开更多
Translation of specialized documents in optometry presents unique challenges,requiring a deep understanding of the professional context,terminology,and adherence to specific translation styles.This paper delves into t...Translation of specialized documents in optometry presents unique challenges,requiring a deep understanding of the professional context,terminology,and adherence to specific translation styles.This paper delves into the translation theory and techniques employed in the English-to-Chinese translation of the“Optoform 80 Installation and Maintenance Manual”,serving as a case study.Emphasizing Nida’s theory of functional equivalence,the paper explores the complexities of translating professional optometry literature,focusing on key points and common issues in translating installation and maintenance manuals for optometric devices.Special attention is given to the translation of professional terminology,employing methods such as addition,omission,conversion,and repetition.The translation process aims to meet specific requirements,ensuring accuracy and coherence while aligning with Chinese language conventions.The paper also analyzes translation methods and techniques concerning terminology,prepositions,conjunctions,and handling parallel elements based on practical insights from the Optoform 80 Manual.展开更多
Various industries today rely on the support of electromechanical equipment,expanding its scope of application and leading to an increase in electromechanical installation projects.However,due to the high level of exp...Various industries today rely on the support of electromechanical equipment,expanding its scope of application and leading to an increase in electromechanical installation projects.However,due to the high level of expertise required and the potential risks involved,it is crucial to emphasize safety management during construction.This paper delves into the significance of construction safety management for electromechanical installation projects,identifies common problems encountered during construction,and proposes solutions.This analysis aims to provide relevant personnel with essential guidance and references for managing electromechanical installation projects safely.展开更多
At present,with the development of society,China’s civil construction equipment installation engineering has many majors,complete catego-ries and high functional requirements.In particular,the installation of the equ...At present,with the development of society,China’s civil construction equipment installation engineering has many majors,complete catego-ries and high functional requirements.In particular,the installation of the equipment is a large amount of work,with a large number of types of work,with a strong degree of specialization,and also technically complex.In the construction of construction projects in China,the installation of engineer-ing equipment is a key control point of construction safety,and equipment installation has always been a key point that construction enterprises at-tach great importance to.The installation of engineering equipment will not only affect the overall progress of engineering construction,but also affect the quality of the project,therefore,the installation of construction equipment has played a vital role and has attracted increasing attention.Combined with the actual situation of construction enterprises,this paper briefly introduces some problems and solutions existing in the construction of construction enterprises.展开更多
To better improve the electrical safety of buildings and fulfill the role of lightning protection and grounding,this article combines cases and discusses seven aspects of lightning protection devices’construction tec...To better improve the electrical safety of buildings and fulfill the role of lightning protection and grounding,this article combines cases and discusses seven aspects of lightning protection devices’construction technology.These aspects include the lightning protection classification of buildings,air terminals,down conductors,grounding devices,division of lightning protection zones,and lightning electromagnetic pulse shielding.Through the introduction of this article,readers can gain a comprehensive understanding of the application and value of lightning protection grounding construction technology in building electrical installation projects.展开更多
Compliant vertical access risers(CVAR)have broad application prospects in deep-water oil and gas transportation.However,the mechanical behaviors of the CVAR with a variable length during installation remains unclear.T...Compliant vertical access risers(CVAR)have broad application prospects in deep-water oil and gas transportation.However,the mechanical behaviors of the CVAR with a variable length during installation remains unclear.To address this issue,based on the flexible segment method,a model of CVAR with a variable length during installation is established in this study,which is verified by the comparison with commercial software.Then,the mechanical behaviors of CVAR during installation are investigated.The results reveal that the CVAR configuration is significantly affected by the buoyancy blocks.The streamwise displacement of CVAR increases with the increase of current velocity.When the BOP weight is insuffcient,obvious upbending is observed in the lower region and transition region,leading to local compression.When the platform moves in the opposite direction to the current,the maximum stress is larger than that of the scenario when the platform moves in the same direction as the current.展开更多
Suction caissons are widely used for anchoring floating platform and offshore wind turbines.Penetration of the suction caisson into the desired position under the combination of its self-weight and applied suction res...Suction caissons are widely used for anchoring floating platform and offshore wind turbines.Penetration of the suction caisson into the desired position under the combination of its self-weight and applied suction resulted from pumping out the encased water is integral to practical engineering.Model tests were carried out to investigate the suctionassisted installation of suction caissons in clay under various undrained shear strengths.It was found that there exists a critical penetration depth value.When the penetration depth is smaller than the critical value,the soil plug undrained shear strength is higher than intact clay(i.e.,clay prior to installation).However,when the penetration depth is greater than the critical penetration depth,the undrained shear strength of soil plug is lower than intact clay.The critical value decreases with the increasing consolidation time and undrained shear strength of clay.During suction-assisted installation,cracks occur around suction caissons.The installation way has little effect on the crack formation.The influence range(i.e.,the maximum distance between the crack and the suction caisson edge)was found to increase with the increasing friction coefficient of interface between the suction caisson wall and soil and decreases with the increasing soil undrained shear strength.In addition,the drained condition of the clay during installation is dominated by the caisson aspect ratio,the undrained shear strength and the friction coefficient between the caisson wall and clay.Equations to estimate the penetration resistance and the required suction to install the suction caisson are summarized.展开更多
The Aral Sea was the fourth largest lake in the world but it has shrunk dramatically as a result of irrational human activities, triggering the "Aral Sea ecological crisis". The ecological problems of the Ar...The Aral Sea was the fourth largest lake in the world but it has shrunk dramatically as a result of irrational human activities, triggering the "Aral Sea ecological crisis". The ecological problems of the Aral Sea have attracted widespread attention, and the alleviation of the Aral Sea ecological crisis has reached a consensus among the five Central Asian countries(Kazakhstan, Uzbekistan, Tajikistan, Kyrgyzstan, and Turkmenistan). In the past decades, many ecological management measures have been implemented for the ecological restoration of the Aral Sea. However, due to the lack of regional planning and zoning, the results are not ideal. In this study, we mapped the ecological zoning of the Aral Sea from the perspective of ecological restoration based on soil type, soil salinity, surface water, groundwater table, Normalized Difference Vegetation Index(NDVI), land cover, and aerosol optical depth(AOD) data. Soil salinization and salt dust are the most prominent ecological problems in the Aral Sea. We divided the Aral Sea into 7 first-level ecological restoration subregions(North Aral Sea catchment area in the downstream of the Syr Darya River(Subregion Ⅰ);artificial flood overflow area in the downstream of the Aral Sea(Subregion Ⅱ);physical/chemical remediation area of the salt dust source area in the eastern part of the South Aral Sea(Subregion Ⅲ);physical/chemical remediation area of severe salinization in the central part of the South Aral Sea(Subregion Ⅳ);existing water surface and potential restoration area of the South Aral Sea(Subregion Ⅴ);Aral Sea vegetation natural recovery area(Subregion Ⅵ);and vegetation planting area with slight salinization in the South Aral Sea(Subregion Ⅶ)) and 14 second-level ecological restoration subregions according to the ecological zoning principles. Implementable measures are proposed for each ecological restoration subregion. For Subregion Ⅰ and Subregion Ⅱ with lower elevations, artificial flooding should be carried out to restore the surface of the Aral Sea. Subregion Ⅲ and Subregion Ⅳ have severe salinization, making it difficult for vegetation to grow. In these subregions, it is recommended to cover and pave the areas with green biomatrix coverings and environmentally sustainable bonding materials. In Subregion Ⅴ located in the central and western parts of the South Aral Sea, surface water recharge should be increased to ensure that this subregion can maintain normal water levels. In Subregion Ⅵ and Subregion Ⅶ where natural conditions are suitable for vegetation growth, measures such as afforestation and buffer zones should be implemented to protect vegetation. This study could provide a reference basis for future comprehensive ecological management and restoration of the Aral Sea.展开更多
This paper proposes a low complexity control scheme for voltage control of a dynamic voltage restorer(DVR)in a three-phase system.The control scheme employs the fractional order,proportional-integral-derivative(FOPID)...This paper proposes a low complexity control scheme for voltage control of a dynamic voltage restorer(DVR)in a three-phase system.The control scheme employs the fractional order,proportional-integral-derivative(FOPID)controller to improve on the DVR performance in order to enhance the power quality in terms of the response time,steady-state error and total harmonic distortion(THD).The result obtained was compared with fractional order,proportionalintegral(FOPI),proportional-integral-derivative(PID)and proportional-integral(PI)controllers in order to show the effectiveness of the proposed DVR control scheme.A water cycle optimization algorithm(WCA)was utilized to find the optimal set for all the controller gains.They were used to solve four power quality issues;balanced voltage sag,balanced voltage swell,unbalanced voltage sag,and unbalanced voltage swell.It showed that one set of controller gain obtained from the WCA could solve all the power quality issues while the others in the literature needed an individual set of optimal gain for each power quality problem.To prove the concept,the proposed DVR algorithm was simulated in the MATLAB/Simulink software and the results revealed that the four optimal controllers can compensate for all the power quality problems.A comparative analysis of the results in various aspects of their dynamic response and%THD was discussed and analyzed.It was found that PID controller yields the most rapid performance in terms of average response time while FOPID controller yields the best performance in term of average%steady-state error.FOPI controller was found to provide the lowest THD percentage in the average%THD.FOPID did not differ much in average response from the PID and average%THD from FOPI;however,FOPID provided the most outstanding average steady-state error.According to the CBMA curve,the dynamic responses of all controllers fall in the acceptable power quality area.The total harmonic distortion(THD)of the compensated load voltage from all the controllers were within the 8%limit in accordance to the IEEE std.519-2014.展开更多
The wild abortive(WA)-type cytoplasmic male sterility(CMS)derived from the wild rice species Oryza rufipogon Griff.is used widely in three-line indica hybrids.The identification and mapping of restorer of fertility(Rf...The wild abortive(WA)-type cytoplasmic male sterility(CMS)derived from the wild rice species Oryza rufipogon Griff.is used widely in three-line indica hybrids.The identification and mapping of restorer of fertility(Rf)genes aided in the development of WA-type hybrids.Here we report that testcross F1 plants from the WA-type CMS line and 9311 exhibited stainable pollen grains with no seed set,indicating that 9311 carries minor-effect Rfs for WA-type CMS.We developed an advanced backcross population consisting of plants harboring small regions of donor chromosomal segments from 9311 in the WATianfeng A genetic background with moderate seed setting rates.Genetic analysis showed that the pollen fertility levels of the backcross individuals are governed by a single gene from 9311 that we named Rf19(t).By use of the RICE 40 K gene chip,three introduced segments were identified in the fertile lines,and a candidate region spanning 4.37–8.29 Mb on chromosome 1 was identified for Rf19(t).Finally,Rf19(t)was fine-mapped to a region of 90 kb between the DNA marker loci STS1-163 and STS1-183,in which eight ORFs were predicted.Also,using relative expression analyses,comparative sequence analyses and functional domain analyses,we identified LOC_Os01g10530 as the most likely candidate gene for Rf19(t).Furthermore,Rf19(t)was found to function in fertility restoration,most probably by regulating the degradation of m RNA transcribed from the mitochondrial gene WA352.These results increase our knowledge of fertility restoration in WA-type CMS lines and will facilitate the development of high-quality pairs of WAtype CMS and maintainer lines.展开更多
Ecosystem degradation is one of the critical constraints for the sustainable development of our planet.However,recovering an ecosystem to a pre-impairment condition is often not practical.The International Restoration...Ecosystem degradation is one of the critical constraints for the sustainable development of our planet.However,recovering an ecosystem to a pre-impairment condition is often not practical.The International Restoration Standards provide the first framework for practical guidance on what constitutes the process of ecological repair and how this repair process can be influenced to improve net ecological benefits.In these Standards,Restorative Continuum is highlighted and it recognises that many do not,yet there is still value in aspiring to improvements to the highest extent possible,with some sites potentially being able to be improved in a stepwise manner.Here we elaborate on these Standards by providing a cross-ecosystem theoretical framework of Stepwise Ecological Restoration(STERE)for promoting higher environmental benefits.STERE allows the selection of suitable restorative modes by considering the degree of degradation while encouraging a transition to a higher state.These models include environmental remediation for completely modified and degraded ecosystems,ecological rehabilitation for highly modified and degraded ecosystems,and ecological restoration for degraded native ecosystems.STERE requires selecting tailored restorative modes,setting clear restorative targets and reference ecosystems,applying a systematic-thinking approach,and implementing a continuous monitoring program at all process stages to achieve a resilient trajectory.STERE allows adaptive management in the context of climate change,and when the evidence is available,to“adapt to the future”to ensure climate resilience.The STERE framework could assist in initiating and implementing restoration projects worldwide,especially in developing countries.展开更多
The metabolite lactate (L-lactate) can be generated and released by diverse brain cells,including neurons,astrocytes,and oligodendrocytes (Kann,2023;Rae et al.,2024).Lactate production usually requires the degradation...The metabolite lactate (L-lactate) can be generated and released by diverse brain cells,including neurons,astrocytes,and oligodendrocytes (Kann,2023;Rae et al.,2024).Lactate production usually requires the degradation of glucose (D-glucose)-and glycogen in astrocytes-to pyruvate by glycolysis and subsequent conversion of pyruvate to lactate by the enzyme lactate dehydrogenase(Figure 1A;Dienel,2019;Rae et al.,2024).展开更多
The Faleme River, a West Africa long transboundary stream (625 km) and abundant flow (>1100 million m<sup>3</sup>) is affected by severe erosion because of mining activities that takes place throughout ...The Faleme River, a West Africa long transboundary stream (625 km) and abundant flow (>1100 million m<sup>3</sup>) is affected by severe erosion because of mining activities that takes place throughout the riverbed. To preserve this important watercourse and ensure the sustainability of its services, selecting and implementing appropriates restorations techniques is vital. In this context, the purpose of this paper was to present an overview of the actions and techniques that can be implemented for the restoration/rehabilitation of the Faleme. The methodological approach includes field investigation, water sampling, literature review with cases studies and SWOT analysis of the four methods presented: river dredging, constructed wetlands, floating treatment wetlands and chemical precipitation (coagulation and flocculation). The study confirmed the pollution of the river by suspended solids (TSS > 1100 mg/L) and heavy metals such as iron, zinc, aluminium, and arsenic. For the restoration methods, it was illustrated through description of their mode of operation and through some case studies presented, that all the four methods have proven their effectiveness in treating rivers but have differences in their costs, their sustainability (detrimental to living organisms or causing a second pollution) and social acceptance. They also have weaknesses and issues that must be addressed to ensure success of rehabilitation. For the case of the Faleme river, after analysis, floating treatment wetlands are highly recommended for their low cost, good removal efficiency if the vulnerability of the raft and buoyancy to strong waves and flow is under control.展开更多
Soil bioengineering has been applied more and more in different regions of Brazil in recent years. The study in hand presents the installation of “new” riparian forest based on soil bioengineering techniques. This r...Soil bioengineering has been applied more and more in different regions of Brazil in recent years. The study in hand presents the installation of “new” riparian forest based on soil bioengineering techniques. This riverbank restoration work was implemented in the year 2010 and two onsite vegetation surveys, one shortly after the construction, and one in 2013. Besides that, the structures of reinforcement work, and its effectiveness were evaluated. By means of the vegetation survey, the applied species were examined for their ability to establish the riverbank in an environmentally sustainable way. Most notably, the species Calliandra brevipes Benth. (Fabaceae, Mimosoideae), Phyllanthus sellowianus Müller Arg. (Euphorbiaceae), Salix humboldtiana Willd. (Salicaceae), Bauhinia forficate Link (Leguminosae), Inga marginata Willd. (Mimosoideae) and Ateleia glazioveana Baill. (Leguminosae, Papilionoideae) showed a good growth development. The proportion of spontaneous vegetation increased significantly, with Pennisetum purpureum Schumach. becoming a dominating species. Resulting from that, the intervention can be assessed as functional and safe, but the strong increase of spontaneous vegetation is undesirable due to less flood resistance. The vegetated riprap could be the best to meet the expectations of the construction elements. Partly, the anchored willows showed as well a good growth development whereas the species used for the hedge brush layer could not develop as expected in large parts of the construction.展开更多
Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. He...Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.展开更多
In the context of high compression rates applied to Joint Photographic Experts Group(JPEG)images through lossy compression techniques,image-blocking artifacts may manifest.This necessitates the restoration of the imag...In the context of high compression rates applied to Joint Photographic Experts Group(JPEG)images through lossy compression techniques,image-blocking artifacts may manifest.This necessitates the restoration of the image to its original quality.The challenge lies in regenerating significantly compressed images into a state in which these become identifiable.Therefore,this study focuses on the restoration of JPEG images subjected to substantial degradation caused by maximum lossy compression using Generative Adversarial Networks(GAN).The generator in this network is based on theU-Net architecture.It features a newhourglass structure that preserves the characteristics of the deep layers.In addition,the network incorporates two loss functions to generate natural and high-quality images:Low Frequency(LF)loss and High Frequency(HF)loss.HF loss uses a pretrained VGG-16 network and is configured using a specific layer that best represents features.This can enhance the performance in the high-frequency region.In contrast,LF loss is used to handle the low-frequency region.The two loss functions facilitate the generation of images by the generator,which can mislead the discriminator while accurately generating high-and low-frequency regions.Consequently,by removing the blocking effects frommaximum lossy compressed images,images inwhich identities could be recognized are generated.This study represents a significant improvement over previous research in terms of the image resolution performance.展开更多
Due to the limitations of a priori knowledge and convolution operation,the existing image restoration techniques cannot be directly applied to the cultural relics mural restoration,in order to more accurately restore ...Due to the limitations of a priori knowledge and convolution operation,the existing image restoration techniques cannot be directly applied to the cultural relics mural restoration,in order to more accurately restore the original appearance of the cultural relics mural images,an image restoration based on the denoising diffusion probability model(Denoising Diffusion Probability Model(DDPM))and the Transformer method.The process involves two steps:in the first step,the damaged mural image is firstly utilized as the condition to generate the noise image,using the time,condition and noise image patch as the inputs to the noise prediction network,capturing the global dependencies in the input sequence through the multi-attentionmechanismof the input sequence and feedforward neural network processing,and designing a long skip connection between the shallow and deep layers in the Transformer blocks between the shallow and deep layers using long skip connections to fuse the feature information of global and local outputs to maintain the overall consistency of the restoration results;In the second step,taking the noisy image as a condition to direct the diffusion model to back sample to generate the restored image.Experiment results show that the PSNR and SSIM of the proposedmethod are improved by 2%to 9%and 1%to 3.3%,respectively,which are compared to the comparison methods.This study proposed synthesizes the advantages of the diffusionmodel and deep learningmodel to make themural restoration results more accurate.展开更多
With 85% of the global oyster reefs destroyed, there is an urgent need for large scale restoration to benefit from the ecosystem services provided by biogenic oyster reefs and their associated biodiversity, including ...With 85% of the global oyster reefs destroyed, there is an urgent need for large scale restoration to benefit from the ecosystem services provided by biogenic oyster reefs and their associated biodiversity, including microorganisms that drive marine biogeochemical cycles. This experiment established a baseline for the monitoring of the bacterial and archaeal community associated with wild oysters, using samples from their immediate environment of the Voordelta, with cohabiting Crassostrea gigas and Ostrea edulis, Duikplaats with only C. gigas attached to rocks, and the Dansk Skaldyrcentre, with no onsite oysters. The microbial profiling was carried out through DNA analysis of samples collected from the surfaces of oyster shells and their substrate, the sediment and seawater. Following 16S rRNA amplicon sequencing and bioinformatics, alpha indices implied high species abundance and diversity in sediment but low abundance in seawater. As expected, Proteobacteria, Bacteroidetes, Firmicutes and Thaumarchaeota dominated the top 20 OTUs. In the Voordelta, OTUs related to Colwellia, Shewanella and Psychrobium differentiated the oysters collected from a reef with those attached to rocks. Duikplaats were distinct for sulfur-oxidizers Sulfurimonas and sulfate-reducers from the Sva 0081 sediment group. Archaea were found mainly in sediments and the oyster associated microbiome, with greater abundance at the reef site, consisting mostly of Thaumarchaeota from the family Nitrosopumilaceae. The oyster free site displayed archaea in sediments only, and algal bloom indicator microorganisms from the Rhodobacteraceae, Flavobacteriaceae family and genus [Polaribacter] huanghezhanensis, in addition to the ascidian symbiotic partner, Synechococcus. This study suggests site specific microbiome shifts, influenced by the presence of oysters and the type of substrate.展开更多
The vegetation growth status largely represents the ecosystem function and environmental quality.Hyperspectral remote sensing data can effectively eliminate the effects of surface spectral reflectance and atmospheric ...The vegetation growth status largely represents the ecosystem function and environmental quality.Hyperspectral remote sensing data can effectively eliminate the effects of surface spectral reflectance and atmospheric scattering and directly reflect the vegetation parameter information.In this study,the abandoned mining area in the Helan Mountains,China was taken as the study area.Based on hyperspectral remote sensing images of Zhuhai No.1 hyperspectral satellite,we used the pixel dichotomy model,which was constructed using the normalized difference vegetation index(NDVI),to estimate the vegetation coverage of the study area,and evaluated the vegetation growth status by five vegetation indices(NDVI,ratio vegetation index(RVI),photochemical vegetation index(PVI),red-green ratio index(RGI),and anthocyanin reflectance index 1(ARI1)).According to the results,the reclaimed vegetation growth status in the study area can be divided into four levels(unhealthy,low healthy,healthy,and very healthy).The overall vegetation growth status in the study area was generally at low healthy level,indicating that the vegetation growth status in the study area was not good due to short-time period restoration and harsh damaged environment such as high and steep rock slopes.Furthermore,the unhealthy areas were mainly located in Dawukougou where abandoned mines were concentrated,indicating that the original mining activities have had a large effect on vegetation ecology.After ecological restoration of abandoned mines,the vegetation coverage in the study area has increased to a certain extent,but the amplitude was not large.The situation of vegetation coverage in the northern part of the study area was worse than that in the southern part,due to abandoned mines mainly concentrating in the northern part of the Helan Mountains.The combination of hyperspectral remote sensing data and vegetation indices can comprehensively extract the characteristics of vegetation,accurately analyze the plant growth status,and provide technical support for vegetation health evaluation.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42322408,42188101,41974211,and 42074202)the Key Research Program of Frontier Sciences,Chinese Academy of Sciences(Grant No.QYZDJ-SSW-JSC028)+1 种基金the Strategic Priority Program on Space Science,Chinese Academy of Sciences(Grant Nos.XDA15052500,XDA15350201,and XDA15014800)supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.Y202045)。
文摘Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)aims to capture two-dimensional(2-D)images of the Earth’s magnetosheath by using soft X-ray imaging.However,the observed 2-D images are affected by many noise factors,destroying the contained information,which is not conducive to the subsequent reconstruction of the three-dimensional(3-D)structure of the magnetopause.The analysis of SXI-simulated observation images shows that such damage cannot be evaluated with traditional restoration models.This makes it difficult to establish the mapping relationship between SXIsimulated observation images and target images by using mathematical models.We propose an image restoration algorithm for SXIsimulated observation images that can recover large-scale structure information on the magnetosphere.The idea is to train a patch estimator by selecting noise–clean patch pairs with the same distribution through the Classification–Expectation Maximization algorithm to achieve the restoration estimation of the SXI-simulated observation image,whose mapping relationship with the target image is established by the patch estimator.The Classification–Expectation Maximization algorithm is used to select multiple patch clusters with the same distribution and then train different patch estimators so as to improve the accuracy of the estimator.Experimental results showed that our image restoration algorithm is superior to other classical image restoration algorithms in the SXI-simulated observation image restoration task,according to the peak signal-to-noise ratio and structural similarity.The restoration results of SXI-simulated observation images are used in the tangent fitting approach and the computed tomography approach toward magnetospheric reconstruction techniques,significantly improving the reconstruction results.Hence,the proposed technology may be feasible for processing SXI-simulated observation images.
基金The work described here has been supported by the TRANSIT project(funded by EU Horizon 2020 and the Europe’s Rail Joint Undertaking under grant agreement 881771).
文摘Acoustic models of railway vehicles in standstill and pass-by conditions can be used as part of a virtual certification process for new trains.For each piece of auxiliary equipment,the sound power measured on a test bench is combined with meas-ured or predicted transfer functions.It is important,however,to allow for installation effects due to shielding by fairings or the train body.In the current work,fast-running analytical models are developed to determine these installation effects.The model for roof-mounted sources takes account of diffraction at the corner of the train body or fairing,using a barrier model.For equipment mounted under the train,the acoustic propagation from the sides of the source is based on free-field Green’s functions.The bottom surfaces are assumed to radiate initially into a cavity under the train,which is modelled with a simple diffuse field approach.The sound emitted from the gaps at the side of the cavity is then assumed to propagate to the receivers according to free-field Green’s functions.Results show good agreement with a 2.5D boundary element model and with measurements.Modelling uncertainty and parametric uncertainty are evaluated.The largest variability occurs due to the height and impedance of the ground,especially for a low receiver.This leads to standard deviations of up to 4 dB at low frequencies.For the roof-mounted sources,uncertainty over the location of the corner used in the equivalent barrier model can also lead to large standard deviations.
文摘Translation of specialized documents in optometry presents unique challenges,requiring a deep understanding of the professional context,terminology,and adherence to specific translation styles.This paper delves into the translation theory and techniques employed in the English-to-Chinese translation of the“Optoform 80 Installation and Maintenance Manual”,serving as a case study.Emphasizing Nida’s theory of functional equivalence,the paper explores the complexities of translating professional optometry literature,focusing on key points and common issues in translating installation and maintenance manuals for optometric devices.Special attention is given to the translation of professional terminology,employing methods such as addition,omission,conversion,and repetition.The translation process aims to meet specific requirements,ensuring accuracy and coherence while aligning with Chinese language conventions.The paper also analyzes translation methods and techniques concerning terminology,prepositions,conjunctions,and handling parallel elements based on practical insights from the Optoform 80 Manual.
文摘Various industries today rely on the support of electromechanical equipment,expanding its scope of application and leading to an increase in electromechanical installation projects.However,due to the high level of expertise required and the potential risks involved,it is crucial to emphasize safety management during construction.This paper delves into the significance of construction safety management for electromechanical installation projects,identifies common problems encountered during construction,and proposes solutions.This analysis aims to provide relevant personnel with essential guidance and references for managing electromechanical installation projects safely.
文摘At present,with the development of society,China’s civil construction equipment installation engineering has many majors,complete catego-ries and high functional requirements.In particular,the installation of the equipment is a large amount of work,with a large number of types of work,with a strong degree of specialization,and also technically complex.In the construction of construction projects in China,the installation of engineer-ing equipment is a key control point of construction safety,and equipment installation has always been a key point that construction enterprises at-tach great importance to.The installation of engineering equipment will not only affect the overall progress of engineering construction,but also affect the quality of the project,therefore,the installation of construction equipment has played a vital role and has attracted increasing attention.Combined with the actual situation of construction enterprises,this paper briefly introduces some problems and solutions existing in the construction of construction enterprises.
文摘To better improve the electrical safety of buildings and fulfill the role of lightning protection and grounding,this article combines cases and discusses seven aspects of lightning protection devices’construction technology.These aspects include the lightning protection classification of buildings,air terminals,down conductors,grounding devices,division of lightning protection zones,and lightning electromagnetic pulse shielding.Through the introduction of this article,readers can gain a comprehensive understanding of the application and value of lightning protection grounding construction technology in building electrical installation projects.
基金supported by the National Natural Science Foundation of China-Shandong Joint Fund(Grant No.U2006226).
文摘Compliant vertical access risers(CVAR)have broad application prospects in deep-water oil and gas transportation.However,the mechanical behaviors of the CVAR with a variable length during installation remains unclear.To address this issue,based on the flexible segment method,a model of CVAR with a variable length during installation is established in this study,which is verified by the comparison with commercial software.Then,the mechanical behaviors of CVAR during installation are investigated.The results reveal that the CVAR configuration is significantly affected by the buoyancy blocks.The streamwise displacement of CVAR increases with the increase of current velocity.When the BOP weight is insuffcient,obvious upbending is observed in the lower region and transition region,leading to local compression.When the platform moves in the opposite direction to the current,the maximum stress is larger than that of the scenario when the platform moves in the same direction as the current.
基金financially supported by the National Natural Science Foundation of China (Grant Nos.52371301,51879044 and 51808325)the Shandong Natural Fund (Grant No.ZR2020QE258)。
文摘Suction caissons are widely used for anchoring floating platform and offshore wind turbines.Penetration of the suction caisson into the desired position under the combination of its self-weight and applied suction resulted from pumping out the encased water is integral to practical engineering.Model tests were carried out to investigate the suctionassisted installation of suction caissons in clay under various undrained shear strengths.It was found that there exists a critical penetration depth value.When the penetration depth is smaller than the critical value,the soil plug undrained shear strength is higher than intact clay(i.e.,clay prior to installation).However,when the penetration depth is greater than the critical penetration depth,the undrained shear strength of soil plug is lower than intact clay.The critical value decreases with the increasing consolidation time and undrained shear strength of clay.During suction-assisted installation,cracks occur around suction caissons.The installation way has little effect on the crack formation.The influence range(i.e.,the maximum distance between the crack and the suction caisson edge)was found to increase with the increasing friction coefficient of interface between the suction caisson wall and soil and decreases with the increasing soil undrained shear strength.In addition,the drained condition of the clay during installation is dominated by the caisson aspect ratio,the undrained shear strength and the friction coefficient between the caisson wall and clay.Equations to estimate the penetration resistance and the required suction to install the suction caisson are summarized.
基金supported by the Key R&D Program of Xinjiang Uygur Autonomous Region,China(2022B03021)the Strategic Priority Research Program of Chinese Academy of Sciences(XDA20030101)the Tianshan Talent Training Program of Xinjiang Uygur Autonomous Region,China(2022TSYCLJ0011).
文摘The Aral Sea was the fourth largest lake in the world but it has shrunk dramatically as a result of irrational human activities, triggering the "Aral Sea ecological crisis". The ecological problems of the Aral Sea have attracted widespread attention, and the alleviation of the Aral Sea ecological crisis has reached a consensus among the five Central Asian countries(Kazakhstan, Uzbekistan, Tajikistan, Kyrgyzstan, and Turkmenistan). In the past decades, many ecological management measures have been implemented for the ecological restoration of the Aral Sea. However, due to the lack of regional planning and zoning, the results are not ideal. In this study, we mapped the ecological zoning of the Aral Sea from the perspective of ecological restoration based on soil type, soil salinity, surface water, groundwater table, Normalized Difference Vegetation Index(NDVI), land cover, and aerosol optical depth(AOD) data. Soil salinization and salt dust are the most prominent ecological problems in the Aral Sea. We divided the Aral Sea into 7 first-level ecological restoration subregions(North Aral Sea catchment area in the downstream of the Syr Darya River(Subregion Ⅰ);artificial flood overflow area in the downstream of the Aral Sea(Subregion Ⅱ);physical/chemical remediation area of the salt dust source area in the eastern part of the South Aral Sea(Subregion Ⅲ);physical/chemical remediation area of severe salinization in the central part of the South Aral Sea(Subregion Ⅳ);existing water surface and potential restoration area of the South Aral Sea(Subregion Ⅴ);Aral Sea vegetation natural recovery area(Subregion Ⅵ);and vegetation planting area with slight salinization in the South Aral Sea(Subregion Ⅶ)) and 14 second-level ecological restoration subregions according to the ecological zoning principles. Implementable measures are proposed for each ecological restoration subregion. For Subregion Ⅰ and Subregion Ⅱ with lower elevations, artificial flooding should be carried out to restore the surface of the Aral Sea. Subregion Ⅲ and Subregion Ⅳ have severe salinization, making it difficult for vegetation to grow. In these subregions, it is recommended to cover and pave the areas with green biomatrix coverings and environmentally sustainable bonding materials. In Subregion Ⅴ located in the central and western parts of the South Aral Sea, surface water recharge should be increased to ensure that this subregion can maintain normal water levels. In Subregion Ⅵ and Subregion Ⅶ where natural conditions are suitable for vegetation growth, measures such as afforestation and buffer zones should be implemented to protect vegetation. This study could provide a reference basis for future comprehensive ecological management and restoration of the Aral Sea.
基金This Research was Financially Supported by Faculty of Engineering,Mahasarakham University(Grant year 2021).
文摘This paper proposes a low complexity control scheme for voltage control of a dynamic voltage restorer(DVR)in a three-phase system.The control scheme employs the fractional order,proportional-integral-derivative(FOPID)controller to improve on the DVR performance in order to enhance the power quality in terms of the response time,steady-state error and total harmonic distortion(THD).The result obtained was compared with fractional order,proportionalintegral(FOPI),proportional-integral-derivative(PID)and proportional-integral(PI)controllers in order to show the effectiveness of the proposed DVR control scheme.A water cycle optimization algorithm(WCA)was utilized to find the optimal set for all the controller gains.They were used to solve four power quality issues;balanced voltage sag,balanced voltage swell,unbalanced voltage sag,and unbalanced voltage swell.It showed that one set of controller gain obtained from the WCA could solve all the power quality issues while the others in the literature needed an individual set of optimal gain for each power quality problem.To prove the concept,the proposed DVR algorithm was simulated in the MATLAB/Simulink software and the results revealed that the four optimal controllers can compensate for all the power quality problems.A comparative analysis of the results in various aspects of their dynamic response and%THD was discussed and analyzed.It was found that PID controller yields the most rapid performance in terms of average response time while FOPID controller yields the best performance in term of average%steady-state error.FOPI controller was found to provide the lowest THD percentage in the average%THD.FOPID did not differ much in average response from the PID and average%THD from FOPI;however,FOPID provided the most outstanding average steady-state error.According to the CBMA curve,the dynamic responses of all controllers fall in the acceptable power quality area.The total harmonic distortion(THD)of the compensated load voltage from all the controllers were within the 8%limit in accordance to the IEEE std.519-2014.
基金financially supported by the National Natural Science Foundation of China(31771913,3207150123)the Jiangsu Key R&D Plan(BE2021301-1)+2 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Open Funds of Jiangsu Key Laboratory of Crop Genetics and Physiology(NYCSL201904)the Open Funds of the Jiangsu Key Laboratory of Crop Genomics and Molecular Breeding(PL202004)。
文摘The wild abortive(WA)-type cytoplasmic male sterility(CMS)derived from the wild rice species Oryza rufipogon Griff.is used widely in three-line indica hybrids.The identification and mapping of restorer of fertility(Rf)genes aided in the development of WA-type hybrids.Here we report that testcross F1 plants from the WA-type CMS line and 9311 exhibited stainable pollen grains with no seed set,indicating that 9311 carries minor-effect Rfs for WA-type CMS.We developed an advanced backcross population consisting of plants harboring small regions of donor chromosomal segments from 9311 in the WATianfeng A genetic background with moderate seed setting rates.Genetic analysis showed that the pollen fertility levels of the backcross individuals are governed by a single gene from 9311 that we named Rf19(t).By use of the RICE 40 K gene chip,three introduced segments were identified in the fertile lines,and a candidate region spanning 4.37–8.29 Mb on chromosome 1 was identified for Rf19(t).Finally,Rf19(t)was fine-mapped to a region of 90 kb between the DNA marker loci STS1-163 and STS1-183,in which eight ORFs were predicted.Also,using relative expression analyses,comparative sequence analyses and functional domain analyses,we identified LOC_Os01g10530 as the most likely candidate gene for Rf19(t).Furthermore,Rf19(t)was found to function in fertility restoration,most probably by regulating the degradation of m RNA transcribed from the mitochondrial gene WA352.These results increase our knowledge of fertility restoration in WA-type CMS lines and will facilitate the development of high-quality pairs of WAtype CMS and maintainer lines.
基金the Shenzhen Science and Technology Program(Grant No.KCXFZ20201221173601003)the Henan Provincial Key Laboratory of Hydrosphere and Watershed Water Security.
文摘Ecosystem degradation is one of the critical constraints for the sustainable development of our planet.However,recovering an ecosystem to a pre-impairment condition is often not practical.The International Restoration Standards provide the first framework for practical guidance on what constitutes the process of ecological repair and how this repair process can be influenced to improve net ecological benefits.In these Standards,Restorative Continuum is highlighted and it recognises that many do not,yet there is still value in aspiring to improvements to the highest extent possible,with some sites potentially being able to be improved in a stepwise manner.Here we elaborate on these Standards by providing a cross-ecosystem theoretical framework of Stepwise Ecological Restoration(STERE)for promoting higher environmental benefits.STERE allows the selection of suitable restorative modes by considering the degree of degradation while encouraging a transition to a higher state.These models include environmental remediation for completely modified and degraded ecosystems,ecological rehabilitation for highly modified and degraded ecosystems,and ecological restoration for degraded native ecosystems.STERE requires selecting tailored restorative modes,setting clear restorative targets and reference ecosystems,applying a systematic-thinking approach,and implementing a continuous monitoring program at all process stages to achieve a resilient trajectory.STERE allows adaptive management in the context of climate change,and when the evidence is available,to“adapt to the future”to ensure climate resilience.The STERE framework could assist in initiating and implementing restoration projects worldwide,especially in developing countries.
文摘The metabolite lactate (L-lactate) can be generated and released by diverse brain cells,including neurons,astrocytes,and oligodendrocytes (Kann,2023;Rae et al.,2024).Lactate production usually requires the degradation of glucose (D-glucose)-and glycogen in astrocytes-to pyruvate by glycolysis and subsequent conversion of pyruvate to lactate by the enzyme lactate dehydrogenase(Figure 1A;Dienel,2019;Rae et al.,2024).
文摘The Faleme River, a West Africa long transboundary stream (625 km) and abundant flow (>1100 million m<sup>3</sup>) is affected by severe erosion because of mining activities that takes place throughout the riverbed. To preserve this important watercourse and ensure the sustainability of its services, selecting and implementing appropriates restorations techniques is vital. In this context, the purpose of this paper was to present an overview of the actions and techniques that can be implemented for the restoration/rehabilitation of the Faleme. The methodological approach includes field investigation, water sampling, literature review with cases studies and SWOT analysis of the four methods presented: river dredging, constructed wetlands, floating treatment wetlands and chemical precipitation (coagulation and flocculation). The study confirmed the pollution of the river by suspended solids (TSS > 1100 mg/L) and heavy metals such as iron, zinc, aluminium, and arsenic. For the restoration methods, it was illustrated through description of their mode of operation and through some case studies presented, that all the four methods have proven their effectiveness in treating rivers but have differences in their costs, their sustainability (detrimental to living organisms or causing a second pollution) and social acceptance. They also have weaknesses and issues that must be addressed to ensure success of rehabilitation. For the case of the Faleme river, after analysis, floating treatment wetlands are highly recommended for their low cost, good removal efficiency if the vulnerability of the raft and buoyancy to strong waves and flow is under control.
文摘Soil bioengineering has been applied more and more in different regions of Brazil in recent years. The study in hand presents the installation of “new” riparian forest based on soil bioengineering techniques. This riverbank restoration work was implemented in the year 2010 and two onsite vegetation surveys, one shortly after the construction, and one in 2013. Besides that, the structures of reinforcement work, and its effectiveness were evaluated. By means of the vegetation survey, the applied species were examined for their ability to establish the riverbank in an environmentally sustainable way. Most notably, the species Calliandra brevipes Benth. (Fabaceae, Mimosoideae), Phyllanthus sellowianus Müller Arg. (Euphorbiaceae), Salix humboldtiana Willd. (Salicaceae), Bauhinia forficate Link (Leguminosae), Inga marginata Willd. (Mimosoideae) and Ateleia glazioveana Baill. (Leguminosae, Papilionoideae) showed a good growth development. The proportion of spontaneous vegetation increased significantly, with Pennisetum purpureum Schumach. becoming a dominating species. Resulting from that, the intervention can be assessed as functional and safe, but the strong increase of spontaneous vegetation is undesirable due to less flood resistance. The vegetated riprap could be the best to meet the expectations of the construction elements. Partly, the anchored willows showed as well a good growth development whereas the species used for the hedge brush layer could not develop as expected in large parts of the construction.
文摘Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.
基金supported by the Technology Development Program(S3344882)funded by the Ministry of SMEs and Startups(MSS,Korea).
文摘In the context of high compression rates applied to Joint Photographic Experts Group(JPEG)images through lossy compression techniques,image-blocking artifacts may manifest.This necessitates the restoration of the image to its original quality.The challenge lies in regenerating significantly compressed images into a state in which these become identifiable.Therefore,this study focuses on the restoration of JPEG images subjected to substantial degradation caused by maximum lossy compression using Generative Adversarial Networks(GAN).The generator in this network is based on theU-Net architecture.It features a newhourglass structure that preserves the characteristics of the deep layers.In addition,the network incorporates two loss functions to generate natural and high-quality images:Low Frequency(LF)loss and High Frequency(HF)loss.HF loss uses a pretrained VGG-16 network and is configured using a specific layer that best represents features.This can enhance the performance in the high-frequency region.In contrast,LF loss is used to handle the low-frequency region.The two loss functions facilitate the generation of images by the generator,which can mislead the discriminator while accurately generating high-and low-frequency regions.Consequently,by removing the blocking effects frommaximum lossy compressed images,images inwhich identities could be recognized are generated.This study represents a significant improvement over previous research in terms of the image resolution performance.
基金financial support from Hunan Provincial Natural Science and Technology Fund Project(Grant No.2022JJ50077)Natural Science Foundation of Hunan Province(Grant No.2024JJ8055).
文摘Due to the limitations of a priori knowledge and convolution operation,the existing image restoration techniques cannot be directly applied to the cultural relics mural restoration,in order to more accurately restore the original appearance of the cultural relics mural images,an image restoration based on the denoising diffusion probability model(Denoising Diffusion Probability Model(DDPM))and the Transformer method.The process involves two steps:in the first step,the damaged mural image is firstly utilized as the condition to generate the noise image,using the time,condition and noise image patch as the inputs to the noise prediction network,capturing the global dependencies in the input sequence through the multi-attentionmechanismof the input sequence and feedforward neural network processing,and designing a long skip connection between the shallow and deep layers in the Transformer blocks between the shallow and deep layers using long skip connections to fuse the feature information of global and local outputs to maintain the overall consistency of the restoration results;In the second step,taking the noisy image as a condition to direct the diffusion model to back sample to generate the restored image.Experiment results show that the PSNR and SSIM of the proposedmethod are improved by 2%to 9%and 1%to 3.3%,respectively,which are compared to the comparison methods.This study proposed synthesizes the advantages of the diffusionmodel and deep learningmodel to make themural restoration results more accurate.
文摘With 85% of the global oyster reefs destroyed, there is an urgent need for large scale restoration to benefit from the ecosystem services provided by biogenic oyster reefs and their associated biodiversity, including microorganisms that drive marine biogeochemical cycles. This experiment established a baseline for the monitoring of the bacterial and archaeal community associated with wild oysters, using samples from their immediate environment of the Voordelta, with cohabiting Crassostrea gigas and Ostrea edulis, Duikplaats with only C. gigas attached to rocks, and the Dansk Skaldyrcentre, with no onsite oysters. The microbial profiling was carried out through DNA analysis of samples collected from the surfaces of oyster shells and their substrate, the sediment and seawater. Following 16S rRNA amplicon sequencing and bioinformatics, alpha indices implied high species abundance and diversity in sediment but low abundance in seawater. As expected, Proteobacteria, Bacteroidetes, Firmicutes and Thaumarchaeota dominated the top 20 OTUs. In the Voordelta, OTUs related to Colwellia, Shewanella and Psychrobium differentiated the oysters collected from a reef with those attached to rocks. Duikplaats were distinct for sulfur-oxidizers Sulfurimonas and sulfate-reducers from the Sva 0081 sediment group. Archaea were found mainly in sediments and the oyster associated microbiome, with greater abundance at the reef site, consisting mostly of Thaumarchaeota from the family Nitrosopumilaceae. The oyster free site displayed archaea in sediments only, and algal bloom indicator microorganisms from the Rhodobacteraceae, Flavobacteriaceae family and genus [Polaribacter] huanghezhanensis, in addition to the ascidian symbiotic partner, Synechococcus. This study suggests site specific microbiome shifts, influenced by the presence of oysters and the type of substrate.
基金This research was supported by the Ningxia Hui Autonomous Region Key Research and Development Plan(2022BEG03052).
文摘The vegetation growth status largely represents the ecosystem function and environmental quality.Hyperspectral remote sensing data can effectively eliminate the effects of surface spectral reflectance and atmospheric scattering and directly reflect the vegetation parameter information.In this study,the abandoned mining area in the Helan Mountains,China was taken as the study area.Based on hyperspectral remote sensing images of Zhuhai No.1 hyperspectral satellite,we used the pixel dichotomy model,which was constructed using the normalized difference vegetation index(NDVI),to estimate the vegetation coverage of the study area,and evaluated the vegetation growth status by five vegetation indices(NDVI,ratio vegetation index(RVI),photochemical vegetation index(PVI),red-green ratio index(RGI),and anthocyanin reflectance index 1(ARI1)).According to the results,the reclaimed vegetation growth status in the study area can be divided into four levels(unhealthy,low healthy,healthy,and very healthy).The overall vegetation growth status in the study area was generally at low healthy level,indicating that the vegetation growth status in the study area was not good due to short-time period restoration and harsh damaged environment such as high and steep rock slopes.Furthermore,the unhealthy areas were mainly located in Dawukougou where abandoned mines were concentrated,indicating that the original mining activities have had a large effect on vegetation ecology.After ecological restoration of abandoned mines,the vegetation coverage in the study area has increased to a certain extent,but the amplitude was not large.The situation of vegetation coverage in the northern part of the study area was worse than that in the southern part,due to abandoned mines mainly concentrating in the northern part of the Helan Mountains.The combination of hyperspectral remote sensing data and vegetation indices can comprehensively extract the characteristics of vegetation,accurately analyze the plant growth status,and provide technical support for vegetation health evaluation.