Structured Illumination Chip Based on Integrated Optics

A compact structured illumination chip based on integrated optics is proposed and fabricated on a silicon-on- insulator platform. Based on the simulation of Caussian beam interference, we adopt a chirped diffraction grating to achieve a specific interference pattern. The experimental results match well with the simulations. The portability and flexibility of the structured illumination chip can be increased greatly through horizontal encapsulation. High levels of integration, compared with the conventional structured illumination approach, make this chip very compact, with a footprint of only around 1 mm2. The chip has no optical lenses and can be easily combined with a microfluidic system. These properties would make the chip very suitable for portable 3D scanner and compact super-resolution microscopy applications.

A 330-500 GHz Zero-Biased Broadband Tripler Based on Terahertz Monolithic Integrated Circuits

A 330-500 GHz zero-biased broadband monolithic integrated tripler is reported. The measured results show that the maximum efficiency and the maximum output power are 2% and 194μW at 348 GHz. The saturation characteristic test shows that the output i dB compression point is about -8.5 dBm at 334 GHz and the maximum efficiency is obtained at the point, which is slightly below the 1 dB compression point. Compared with the conventional hybrid integrated circuit, a major advantage of the monolithic integrated circuit is the significant improvement of reliability and consistency. In this work, a terahertz monolithic frequency multiplier at this band is designed and fabricated.

The 8×10 GHz Receiver Optical Subassembly Based on Silica Hybrid Integration Technology for Data Center Interconnection

An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.

A Model-Based, Aspiration-Led Decision Support System NY-IEDSS

An AI-aided simulation system embedded in a model-based, aspiration-led decision support system NY-IEDSS is reported. The NY-IEDSS is designed for mid-term development strategic study of the Nanyang Region in Henan, China, and is getting beyond its prototype stage under the decision maker's (the end user) orientation. The integration of simulation model system, decision analysis and expert system for decision support in the system implementation was reviewed. The intent of the paper is to provide insight as to how system capability and acceptability can be enhanced by this integration. Moreover, emphasis is placed on problem orientation in applying the method.

GENUS FIELDS， CONDUCTORS AND RELATIVE INTEGRAL BASES FOR ABELIAN FUNCTION FIELDS

For a finite abelian tame extension L/Fq(T), we will determine its genus field and conductor in this paper, and prove the existence theorems of the relative integral bases for L over any of its subfields.

ON THE ERROR OF QUADRATURE FORMULAE FOR CAUCHY PRINCIPAL VALUE INTEGRALS BASED ON PIECEWISE INTERPOLATION

We consider the computation of the. Cauchy principal value mtegral by quadrature formulaeof compound type, which are obtained by replacing f by a piecewise defined function F,[;]. The behaviour of the constants m the estimates where quadrature error) is determined for fixed i and which means that not only the. order, but also the coefficient of the main term of is determined. The behaviour of these error constants is compared -with the corresponding ones obtained for the. method of subtraction of the singularity. As it turns out, these error constants have, in general, the same asymptotic behaviour.

Resonator integrated optic gyro based on multilevel laser frequency lock-in technique

The resonator integrated optic gyros（RIOGs） based on the Sagnac effect have gained extensive attention in navigation and guidance systems due to their predominant advantages： high theoretical accuracy and simple integration. However, the problems of losing lock and low lock-in accuracy are the bottlenecks, which restrict the development of digital RIOGs. Therefore, a multilevel laser frequency lock-in technique has been proposed in this Letter to address these problems. The experimental results show that lock-in accuracy can be improved one order higher and without losing lock in a variable temperature environment. Then, a digital miniaturized RIOG prototype（18 cm × 18 cm × 20 cm） has been produced, and long-term（1 h） bias stability of 26.6 deg/h is successfully demonstrated.

High-sensitivity integrated devices based on surface plasmon resonance for sensing applications

A metallic nanostructured array that scatters radiation toward a thin metallic layer generates surface plasmon resonances for normally incident light. The location of the minimum of the spectral reflectivity serves to detect changes in the index of refraction of the medium under analysis. The normal incidence operation eases its integration with optical fibers. The geometry of the arrangement and the material selection are changed to optimize some performance parameters as sensitivity, figure of merit, field enhancement, and spectral width. This optimization takes into account the feasibility of the fabrication. The evaluated results of sensitivity(1020 nm/RIU)and figure of merit(614 RIU^(-1)) are competitive with those previously reported.

112 Gbit/s transmitter optical subassembly based on hybrid integrated directly modulated lasers

Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer operated at the O-band. The bandwidth for all channels is measured to be approximately 3 GHz. The 112 Gb∕s transmission is experimentally demonstrated for a 10 km standard single mode fiber（SSMF）, in which an optical isolator is used for avoiding the back-reflected and scattered light to improve the bit error rate（BER） performance. A low BER and clear eye opening are achieved for 10 km transmission.

Robust and low-cost interrogation technique for integrated photonic biochemical sensors based on Mach–Zehnder interferometers

We describe and experimentally demonstrate a measuring technique for Mach–Zehnder interferometer(MZI)based integrated photonic biochemical sensors. Our technique is based on the direct measurement of phase changes between the arms of the MZI, achieved by signal modulation on one of the arms of the interferometer together with pseudoheterodyne detection, and it allows us to avoid the use of costly equipment such as tunable light sources or spectrum analyzers. The obtained output signal is intrinsically independent of wavelength, power variations, and global thermal variations, making it extremely robust and adequate for use in real conditions. Using a silicon-on-insulator MZI, we demonstrate the real-time monitoring of refractive index variations and achieve a detection limit of 4.1 × 10^(-6)refractive index units(RIU).

Monolithically integrated dual-wavelength photodetector based on a step-shaped Fabry-Prot filter

A novel long wavelength photodetector with dual-wavelength spectral response is designed and fabricated using a step-shaped Fabry-Perot （F-P） filter structure. The step-shaped GaAs/A1GaAs distributed Bragg reflectors and the InP PIN photodetector are grown on a GaAs substrate using low pressure metal organic chemical vapor deposition. High quality GaAs/InP heteroepitaxy is realized by employing a thin low temperature buffer layer. The photodetector structure is optimized by theoretical simulation. This device has a dual-peak distance of 19 nm （1558 and 1 577 nm）. The 3-dB bandwidth of 16 GHz is simultaneously obtained with peak ouantum efficiencies of 8.5% and 8.6% around 1 .55R and 1 .577 nm respectively

Photonic integrated circuit components based on amorphous silicon-on-insulator technology

We present integrated-optic building blocks and functional photonic devices based on amorphous siliconon-insulator technology. Efficient deep-etched fiber-to-chip grating couplers, low-loss single-mode photonic wire waveguides, and compact power splitters are presented. Based on the sub-μm photonic wires, 2 × 2 Mach–Zehnder interferometers and add/drop microring resonators(MRRs) with low device footprints and high finesse up to 200 were realized and studied. Compact polarization rotators and splitters with ≥10 d B polarization extinction ratio were fabricated for the polarization management on-chip. The tuning and trimming capabilities of the material platform are demonstrated with efficient microheaters and a permanent device trimming method, which enabled the realization of energy-efficient photonic circuits. Wavelength multiplexers in the form of cascaded filter banks and 4 × 4 routers based on MRR switches are presented. Fabrication imperfections were analyzed and permanently corrected by an accurate laser-trimming method, thus enabling eight-channel multiplexers with record low metrics of sub-m W static power consumption and ≤1°C temperature overhead. The high quality of the functional devices, the high tuning efficiency, and the excellent trimming capabilities demonstrate the potential to realize low-cost, densely integrated, and ultralow-power 3D-stacked photonic circuits on top of CMOS microelectronics.

Novel Block Chain Technique for Data Privacy and Access Anonymity in Smart Healthcare

The Internet of Things (IoT) and Cloud computing are gaining popularity due to their numerous advantages, including the efficient utilization of internetand computing resources. In recent years, many more IoT applications have beenextensively used. For instance, Healthcare applications execute computations utilizing the user’s private data stored on cloud servers. However, the main obstaclesfaced by the extensive acceptance and usage of these emerging technologies aresecurity and privacy. Moreover, many healthcare data management system applications have emerged, offering solutions for distinct circumstances. But still, theexisting system has issues with specific security issues, privacy-preserving rate,information loss, etc. Hence, the overall system performance is reduced significantly. A unique blockchain-based technique is proposed to improve anonymityin terms of data access and data privacy to overcome the above-mentioned issues.Initially, the registration phase is done for the device and the user. After that, theGeo-Location and IP Address values collected during registration are convertedinto Hash values using Adler 32 hashing algorithm, and the private and publickeys are generated using the key generation centre. Then the authentication is performed through login. The user then submits a request to the blockchain server,which redirects the request to the associated IoT device in order to obtain thesensed IoT data. The detected data is anonymized in the device and stored inthe cloud server using the Linear Scaling based Rider Optimization algorithmwith integrated KL Anonymity (LSR-KLA) approach. After that, the Time-stamp-based Public and Private Key Schnorr Signature (TSPP-SS) mechanismis used to permit the authorized user to access the data, and the blockchain servertracks the entire transaction. The experimental findings showed that the proposedLSR-KLA and TSPP-SS technique provides better performance in terms of higherprivacy-preserving rate, lower information loss, execution time, and Central Processing Unit (CPU) usage than the existing techniques. Thus, the proposed method allows for better data privacy in the smart healthcare network.

Broadband on-chip integrator based on silicon photonic phase-shifted Bragg grating

All-optical integrators are key devices for the realization of ultra-fast passive photonic networks, and, despite their broad applicability range(e.g., photonic bit counting, optical memory units, analogue computing, etc.), their realization in an integrated form is still a challenge. In this work, an all-optical integrator based on a silicon photonic phase-shifted Bragg grating is proposed and experimentally demonstrated, which shows a wide operation bandwidth of 750 GHz and integration time window of 9 ps. The integral operation for single pulse, inphase pulses, and π-shifted pulses with different delays has been successfully achieved.

Cross-talk-free integral imaging three-dimensional display based on a pyramid pinhole array

We propose a cross-talk-free integral imaging 3D display based on a pyramid pinhole array. The pyramid pinhole array is used to provide a point light source array. Since the generated point light source array is behind a transmission-type display panel that displays an elemental image array, the pseudoscopic problem can be resolved. By setting the appropriate parameters for the pyramid pinhole array, the cross talk can be eliminated.We experimentally verify the reconstruction of the orthoscopic and cross-talk-free 3D images using the proposed 3D display.

1D integral imaging based on parallax images' virtual reconstruction

One-dimensional （ID） integral imaging based on parallax images＇ virtual reconstruction is proposed. The 1D integral imaging contains parallax images＇ capture process, parallax images＇ virtual reconstruction process, and ID elemental image array＇s generation process. A pixel mapping algorithm is deduced to implement the last two processes; a ID elemental image array is generated by the mapping of pixels on the parallax images obtained using a ID camera array. The proposed ID integral imaging can capture the ID elemental image array of a real three-dimensional （3D） scene.

Crosstalk-free integral imaging display based on double plano-convex micro-lens array

A crosstalk-free integral imaging display consisting of a display panel and double piano-convex micro-lens array is proposed. The double piano-convex micro-lens array includes two micro-lens arrays, A and B. Micro-lens array A is used to eliminate crosstalk by completely reflecting crosstalk lights. Micro-lens array B, located near microqens array A, is used to display three-dimensional images. Computer simulations based on ray-tracing are conducted. Crosstalk-free reconstruction images may be clearly observed from the simulation results.

A lattice measuring method based on integral imaging technology

Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the system works,the SEM measuring system is equivalent to an integral image acquisition system.Firstly,a lattice measuring method is researched based on integral imaging theory.Secondly,the system parameters are calibrated by the VLSI lattice standard.Finally,the value of the lattice standard to be tested is determined based on the calibration parameters and the lattice measuring algorithm.The experimental results show that,compared with the traditional electron microscope measurement method,the relative error of the measured value of the algorithm is maintained within 0.2%,with the same level of measurement accuracy,but it expands the field of view of the electron microscope measurement system,which is suitable for the measurement of samples under high magnification.

Advances in the light field displays based on integral imaging and holographic techniques(Invited Paper)

Light field displays comprise three-dimensional （3D） visual information presentation devices capable of providing realistic and full parallax autostereoscopic images. In this letter, the recent advances in the light field displays based on integral imaging （II） and holographic techniques are presented. Several advanced approaches to demonstrate the light field displays including viewing angle enhancement techniques of the II display, a fast hologram generation method using graphics processing unit （GPU） and multiple WRPs, and a holographic microscopy to display the living cells are reported. These methods improve some important constraints of the light field displays and add new features.