Simulation and Analysis of Cascading Faults in Integrated Heat and Electricity Systems Considering Degradation Characteristics

Cascading faults have been identified as the primary cause of multiple power outages in recent years.With the emergence of integrated energy systems(IES),the conventional approach to analyzing power grid cascading faults is no longer appropriate.A cascading fault analysis method considering multi-energy coupling characteristics is of vital importance.In this study,an innovative analysis method for cascading faults in integrated heat and electricity systems(IHES)is proposed.It considers the degradation characteristics of transmission and energy supply com-ponents in the system to address the impact of component aging on cascading faults.Firstly,degradation models for the current carrying capacity of transmission lines,the water carrying capacity and insulation performance of thermal pipelines,as well as the performance of energy supply equipment during aging,are developed.Secondly,a simulation process for cascading faults in the IHES is proposed.It utilizes an overload-dominated development model to predict the propagation path of cascading faults while also considering network islanding,electric-heating rescheduling,and load shedding.The propagation of cascading faults is reflected in the form of fault chains.Finally,the results of cascading faults under different aging levels are analyzed through numerical examples,thereby verifying the effectiveness and rationality of the proposed model and method.

Energy hub-based optimal planning for integrated energy systems considering part-load characteristics and synergistic effect of equipment

Integrated energy systems(lESs)represent a promising energy supply model within the energy internet.However,multi-energy flow coupling in the optimal configuration of IES results in a series of simplifications in the preliminary planning,affecting the cost,efficiency,and environmental performance of IES.A novel optimal planning method that considers the part-load characteristics and spatio-temporal synergistic effects of IES components is proposed to enable a rational design of the structure and size of IES.An extended energy hub model is introduced based on the“node of energy hub”concept by decomposing the IES into different types of energy equipment.Subsequently,a planning method is applied as a two-level optimization framework-the upper level is used to identify the type and size of the component,while the bottom level is used to optimize the operation strategy based on a typical day analysis method.The planning problem is solved using a two-stage evolutionary algorithm,combing the multiple-mutations adaptive genetic algorithm with an interior point optimization solver,to minimize the lifetime cost of the IES.Finally,the feasibility of the proposed planning method is demonstrated using a case study.The life cycle costs of the IES with and without consideration of the part-load characteristics of the components were$4.26 million and$4.15 million,respectively,in the case study.Moreover,ignoring the variation in component characteristics in the design stage resulted in an additional 11.57%expenditure due to an energy efficiency reduction under the off-design conditions.

Integrated gravity and magnetic study on patterns of petroleum basin occurrence in the China seas and adjacent areas

The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and evolution of petroleum basins along with the migration and accumulation of oil and gas are often closely related to the tectonic environment.The gravity and magnetic fields with high lateral resolution and wide coverage provide important data for regional tectonic research.Based on the gravity data in the Global Satellite Gravity Anomaly Database(V31.1)and magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),this study uses integrated gravity and magnetic field technique to obtain integrated gravity and magnetic field result for the China seas and adjacent areas,and then adopts the normalized vertical derivative of the total horizontal derivative technique to conduct partition.Finally,it identifies the relationship between the partition characteristics and tectonics as well as the patterns of petroleum basin occurrence.The research shows that the partition of gravity and magnetic field integrated result has a good correlation with the Neo-Cathaysian tectonic system and tectonic units.The petroleum basins are characterized according to three blocks arranged from north to south and four zones arranged from east to west.The north-south block structure causes the uneven distribution of oil and gas resources in the mainland area and the differences in the hydrocarbon-bearing strata.Petroleum basins are more abundant in the north than in the south.The ages of the main oil-and gas-bearing strata are“Paleozoic–Mesozoic,Paleozoic–Mesozoic–Cenozoic,and Paleozoic–Mesozoic”,in order from north to south.The difference in the overall type of oil and gas resources in all basins is controlled by the east–west zonation.From east to west,the oil and gas resource type exhibits a wave-like pattern of“oil and gas,gas,oil and gas,gas”.The vertical distribution is characterized by an upper oil(Mesozoic–Cenozoic)and lower gas(Mesozoic–Paleozoic)structure.Within the study area,the Paleozoic marine strata should be the main strata of future natural gas exploration.

Influence of matrix physical properties on flow characteristics in dual network model

The tight oil formation develops with microfractures and matrix pores,it is important to study the influence of matrix physical properties on flow characteristics.At first,the representative fracture and matrix samples are selected respectively in the dual media,the fracture and matrix digital rocks are constructed with micro-CT scanning at different resolutions,and the corresponding fracture and matrix pore networks are extracted,respectively.Then,the modified integration method is proposed to build the dual network model containing both fracture and matrix pore-throat elements,while the geometric-topological structure equivalent matrix pores are generated to fill in the skeleton domain of fracture network,the constructed dual network could describe the geometric-topological structure characteristics of fracture and matrix pore-throat simultaneously.At last,by adjusting the matrix pore density and the matrix filling domain factor,a series of dual network models are obtained to analyze the influence of matrix physical properties on flow characteristics in dual-media.It can be seen that the matrix system contributes more to the porosity of the dual media and less to the permeability.With the decrease in matrix pore density,the porosity/permeability contributions of matrix system to dual media keep decreasing,but the decrease is not significant,the oil-water co-flow zone decreases and the irreducible water saturation increases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.With the decrease in matrix filling domain factor,the porosity/permeability contributions of matrix system to dual media decreases,the oil-water co-flow zone increases and the irreducible water saturation decreases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.The results can be used to explain the dual-media flow pattern under different matrix types and different fracture control volumes during tight oil production.

TRANSIENT CHARACTERISTIC ANALYSIS OF HIGH TEMPERATURE CMOS DIGITAL INTEGRATED CIRCUITS

This paper analyses the transient characteristics of high temperature CMOS inverters and gate circuits, and gives the computational formulas of their rise time, fall time and delay time. It may be concluded that the transient characteristics of CMOS inverters and gate circuits deteriorate due to the reduction of carrier mobilities and threshold voltages of MOS transistors and the increase of leakage currents of MOS transistors drain terminal pn junctions. The calculation results can explain the experimental phenomenon.

General Patterns of Spatial Distribution of the Integral Characteristics of Benthic Macrofauna of the Northwestern Pacific and Biological Structure of Ocean

Horizontal (geographic) and vertical (geonemic) spatial distribution of the integral properties of a large multispecies assemblage (1306 species of fish and invertebrate with body size ≥ 1 cm) from northwest Pacific sea bottom is investigated. There are total number and biomass, average animal size (mean individual weight), species diversity (Shannon’s index) and its components: species richness and evenness (Pielou’s index), i.e. generalized parameters describing benthic macrofauna as a whole. Correlations of these parameters with distance from shore and depth have been found as well as very weak latitudinal zonality display in the region. Even such well-known generalization as Humboldt-Wallace’s law and Bergman’s rule has no noticeable manifestations here. Earlier similar, but not identical, regularities were discovered in the northwest Pacific pelagic water layer. Collation of what there is in the two different sea zones results in new supplements to Zenkevich-Bogorov’s concept of biological structure of the ocean.

Clinical Characteristics of 42 SARS Patients and Their Treatment of Integrative Chinese and Western Medicine

Objective:To understand the clinical manifestation of severe acute respiratory syndrome (SARS) and explore its effective treatment with integrative Chinese and western medicine (ICWM). Methods:The data of patients, whose diagnosis of SARS had been confirmed were summarized and analyzed, and clinical observation was conducted when the patients were treated with ICWM. Results:In the early stage of the 42 patients, the symptoms revealed were fever in 100% of SARS patients, headache in 92. 9%, aversion to cold in 76. 2%, chest stuffiness in 76. 2% , cough in 73. 8% and myalgia in 88.1%; pulmonary lesion involves >3 lobes in 42. 9%, 2 lobes in 47. 6% and 1 lobe in 9. 5%; 61. 9% of them showed liver function abnormality (increase of ALT or AST), 47. 6% showed elevated myocardial enzyme (CK or CK-MB) , 0. 48% showed an inclination of renal function (higher of BUN or Cr); in their T lymphocyte subsets, 91. 2% (31/34 patients) had lowered CD3 and 76. 5% (26/34 patients) lowered CD4/CD8 ratio. In the mid-late stage, the symptoms were lassitude and weakness in 85. 7%, scare in 81. 0%, short of breath or chest stuffiness in 71. 4%, loss of appetite in 64. 3%;light dark tongue proper in 52. 4%, yellow and white tongue coating in 45. 2%, and yellow thick coating on the middle-root part of the tongue in 21. 4%. Most of them were asymptomatic when discharged from hospital, with 92. 8% of their pulmonary lesion, according to chest film, completely absorbed and liver function, myocardial enzyme and renal function all normalized. However, of the 30 patients who had CD3 reexamination, 70% of the CD3 showed lower than normal range and 36. 7% showed their CD4/CD8 inclined to lower margin, follow-up should be done for these patients. Of the 42 patients, who received western medicine (WM) alone in the early stage and ICWM in the mid-late stage, 10 were severe cases and 3 critical cases, but none of them died. The mean defervescent time was 3. 52±0. 85 days, the time for complete absorption of pulmonary lesion judged by chest X-ray film was 26. 82±5. 98 days, and the mean hospitalization time was 33. 60±4. 37 days. Conclusion:The manifestation of SARS is multifarious, showing that there were damage in multiple organs. The T lymphocyte count percentage and its subsets, CD3 and CD4 /CD8 ratio, are valuable for early diagnosis and follow-up in the rehabilitation stage. Majority of the patients could be clinically cured. Combined treatment of WM and TCM according to syndrome differentiation and psychiatric intervention are beneficial to remit partial symptoms and promote rehabilitation.

Analysis on Development Trend of the D omestic Interior Design Pattern based on the Regional Characteristics and Cultural Integration

Interior is the main space of human activities, which is an important part of human life and design activities, and is the link between spiritual civilization and material civilization. Interior design originates from life, and needs to solve the problem of the material world and spiritual world. People improve the living environment and life quality through interior designs. The style of design depends on the geographical features and various cultures, which refi ects the artistic features and personality. The development history of modern architecture and interior design shows that the style of interior design is an important part of the whole architectural style, which reffects the design features of the whole building. Therefore, interior design and outdoor design should be in harmony. The orientation and characteristics of interior design determine the necessity of the style reforms. The future development trend of interior development may have the following characteristics humanism, green design, nationalization, intelligence and regionalization.

Landscape Characteristics of Fangcheng Historic District in Shenyang City

The theory of landscape integrity was applied in this study to interpret landscape characteristics of Fangcheng Historic District,and the approaches for its future design were proposed.

An Overview of Performance Characteristics, Experiencesand Trends of Aerospace Engine Bearings Technologies

In this paper, the operating conditions, technical requirements, performance characteristics, design ideas, application experiences and development trends of aerospace engine bearings, including material technology, integration design and reliability, are reviewed. The development history of aerospace engine bearing is recalled briefly at first. Then today＇s material technologies and the high bearing performances of the bearings obtained through the new materials are introduced, which play important roils in the aeroengine bearing developments. The integration design ideas and practices are explained to indicate its significant advantages and importance to the aerospace engine bearings. And the reliability of the shaft-bearing system is pointed out and treated as the key requirement with goals for both engine and bearing. Finally, as it is believed that the correct design comes from practice, the pre-qualification rig testing conducted by FAG Aerospace GmbH ＆ Co. KG is briefly illustrated as an example. All these lead to the development trends of aerospace engine bearings from different aspects.

Analysis of vibration reduction characteristics and applicability of steel-spring floating-slab track

A coupled dynamics computation model for metro vehicles, along with a steel-spring floating-slab track, is developed based on the theory of vehicle-track coupled dynamics. Using the developed model, the influences of the thickness, length and mass of floating-slab, spring rate and its arrangement space, running speed, etc. on the time and frequency domain characteristics of steel-spring fulcrum force are analyzed. The applicability of steel-spring floatingslab track is discussed through two integrated example cases of metro and buildings possessing distinct natural vibra- tion characteristics. It is concluded that, it is quite significant, in the optimization modular design of the parameters of steel-spring floating-slab track, to take the matching relationship of both the amplitude-frequency characteristics of steel-spring fulcrum force and natural vibration characteristics of integrated structures into comprehensive consideration. In this way the expensive steel-spring floating-slab track can be economically and efficiently utilized according to the site condition, and at the same time, the economic losses and bad social impact resulted from the resonance during usage of steel-spring floating-slab track can be avoided.

The influences of model parameters on the characteristics of memristors

As the fourth passive circuit component, a memristor is a nonlinear resistor that can ＂remember＂ the amount of charge passing through it. The characteristic of ＂remembering＂ the charge and non-volatility makes memristors great potential candidates in many fields. Nowadays, only a few groups have the ability to fabricate memristors, and most researchers study them by theoretic analysis and simulation. In this paper, we first analyse the theoretical base and characteristics of memristors, then use a simulation program with integrated circuit emphasis as our tool to simulate the theoretical model of memristors and change the parameters in the model to see the influence of each parameter on the characteristics. Our work supplies researchers engaged in memristor-based circuits with advice on how to choose the proper parameters.

CHARACTERISTIC GALERKIN METHOD FOR CONVECTION-DIFFUSION EQUATIONS AND IMPLICIT ALGORITHM USING PRECISE INTEGRATION

This paper presents a finite element procedure for solving transient, multidimensional convection-diffusion equations. The procedure is based on the characteristic Galerkin method with an implicit algorithm using precise integration method. With the operator splitting procedure, the precise integration method is introduced to determine the material derivative in the convection-diffusion equation, consequently, the physical quantities of material points. An implicit algorithm with a combination of both the precise and the traditional numerical integration procedures in time domain in the Lagrange coordinates for the characteristic Galerkin method is formulated. The stability analysis of the algorithm shows that the unconditional stability of present implicit algorithm is enhanced as compared with that of the traditional implicit numerical integration procedure. The numerical results validate the presented method in solving convection-diffusion equations. As compared with SUPG method and explicit characteristic Galerkin method, the present method gives the results with higher accuracy and better stability.

Derivation of lattice Boltzmann equation via analytical characteristic integral

A lattice Boltzmann(LB) theory, the analytical characteristic integral(ACI) LB theory, is proposed in this paper.ACI LB theory takes the Bhatnagar–Gross–Krook(BGK)-Boltzmann equation as the exact kinetic equation behind Navier–Stokes continuum and momentum equations and constructs an LB equation by rigorously integrating the BGK-Boltzmann equation along characteristics. It is a general theory, supporting most existing LB equations including the standard lattice BGK(LBGK) equation inherited from lattice-gas automata, whose theoretical foundation had been questioned. ACI LB theory also indicates that the characteristic parameter of an LB equation is collision number, depicting the particle-interaction intensity in the time span of the LB equation, instead of the traditionally assumed relaxation time, and the over-relaxation time problem is merely a manifestation of the temporal evolution of equilibrium distribution along characteristics under high collision number, irrelevant to particle kinetics. In ACI LB theory, the temporal evolution of equilibrium distribution along characteristics is the determinant of LB method accuracy and we numerically prove this.

Chaos generation by a hybrid integrated chaotic semiconductor laser

We design a hybrid integrated chaotic semiconductor laser with short-cavity optical feedback.It can be assembled in a commercial butterfly shell with just three micro-lenses.One of them is coated by a transflective film to provide the optical feedback for chaos generation while insuring regular laser transmission.We prove the feasibility of the chaos generation in this compact structure and provide critical external parameters for the fabrication by theoretical simulations.Rather than the usual changeless internal parameters used in previous simulation research,we extract the real parameters of the chip by experiment.Moreover,the maps of the largest Lyapunov exponent with varying bias current and feedback intensity Kap demonstrate the dynamic characteristics under different external-cavity conditions.Each laser chip has its own optimal external cavity length(L)and feedback intensity(Kap)to generate chaos because of the different internal parameters.We have acquired two ranges of optimal parameters(L=4 mm,0.12〈Kap〈0.2 and L=5 mm,0.07〈Kap〈0.12)for two different chips.

A Fault Risk Warning Method of Integrated Energy Systems Based on RelieF-Softmax Algorithm

The integrated energy systems,usually including electric energy,natural gas and thermal energy,play a pivotal role in the energy Internet project,which could improve the accommodation of renewable energy through multienergy complementary ways.Focusing on the regional integrated energy system composed of electrical microgrid and natural gas network,a fault risk warning method based on the improved RelieF-softmax method is proposed in this paper.The raw data-set was first clustered by the K-maxmin method to improve the preference of the random sampling process in the RelieF algorithm,and thereby achieved a hierarchical and non-repeated sampling.Then,the improved RelieF algorithm is used to identify the feature vectors,calculate the feature weights,and select the preferred feature subset according to the initially set threshold.In addition,a correlation coefficient method is applied to reduce the feature subset,and further eliminate the redundant feature vectors to obtain the optimal feature subset.Finally,the softmax classifier is used to obtain the early warnings of the integrated energy system.Case studies are conducted on an integrated energy system in the south of China to demonstrate the accuracy of fault risk warning method proposed in this paper.

Investigation on characteristic of J integral parameter in welded joints

The J integral parameter and its application feasibility in welded joints with different weldmatchings in yield strength (overmatching weld and undermatching weld), different material constitutive laws (material with a Ludes yield plateau and power hardening) and under different fracture types (ligament yielding fracture and general yielding fracture) are investigated. First the condition of J integral path independent has been studied based upon finite element analysis by using ADINA procedure on welded joints. It was shown that the J integral is path dependent for the cases studied in this paper. Then experiments were carried out to study availability ofJ integral as a plastic singularity parameter at the tip of the notch in welded joints. The results show that J dominance in most cases studied is not validated in v and u displacement fields. From both considerations mentioned above it can be concluded that J-integral as controlling parameter used to estimate the safety of welded structures is not always made clear.

Application study on plasma ignition in aeroengine strut–cavity–injector integrated afterburner

To increase the thrust-weight ratio in next-generation military aeroengines,a new integrated afterburner was designed in this study.The integrated structure of a combined strut–cavity–injector was applied to the afterburner.To improve ignition characteristics in the afterburner,a new method using a plasma jet igniter was developed and optimized for application in the integrated afterburner.The effects of traditional spark igniters and plasma jet igniters on ignition processes and ignition characteristics of afterburners were studied and compared with the proposed design.The experimental results show that the strut–cavity–injector combination can achieve stable combustion,and plasma ignition can improve ignition characteristics.Compared with conventional spark ignition,plasma ignition reduced the ignition delay time by 67 ms.Additionally,the ignition delay time was reduced by increasing the inlet velocity and reducing the excess air coefficient.This investigation provides an effective and feasible method to apply plasma ignition in aeroengine afterburners and has potential engineering applications.

Integrated Development of the Tourism and Protection of Ancient Towns

Local color is not only the cultural counter in the competition between cities,but the main cultural element that attracts foreign tourists.In recent years,many cities have regarded tourism development as a major mean of reviving ancient towns.The excavation of local culture,material reconstruction of local characteristics,and the resurgence and"reproduction"of local industries have become an important work in the tourism development of ancient towns.Apart from the discussion of the protection,inheritance,and touristification of tangible cultural heritage and intangible cultural heritage,this paper demonstrated the possibility of the integration and production capacity of local characteristic industry resources and analyzed the impact of the integrated development on the lifestyle and living atmosphere of residents in the ancient towns.In this paper,ways to realize the integrated development of the tourism and protection of ancient towns were included as follows:(1)to ensure the principal status of local residents and give full play to their initiatives;(2)to protect the local traditional way of life and improve the public service system;(3)to choose the appropriate development pattern and achieve the diversified development;(4)to improve service facilities in tourism and adjust the structure of tourism products.

Fingerprints Matching Based on the Integrated Template

Traditional fingerprints matching approaches are based on the minutiae and the texture characteristics. It is difficult for today's techniques to deal with the images captured by the solid-state fingerprint sensors because the sampling area of these sensors is very small and only portion of the fingerprint can be obtained. In this paper, a novel integrated template has been built using several images and combining the minutiae with the texture characteristics at the same time. By using a kind of Gabor filters (eight directions) on the region around the reliable minutiae, local texture of each minutia termed as minutiacode is extracted. Further, a real-time matching algorithm using the integrated template is presented. The output is determined by the weight factor of the compound matching. Finally, experimental results show that this system performs well in reducing false reject rate (FRR).