In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated...In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated estimation guidance and control nonlinear model with limited actuator deflection angle is established considering the seeker's FOV constraint.The boundary time-varying integral barrier Lyapunov function(IBLF)is employed in backstepping design to constrain the body line-of-sight(BLOS)in IEGC system to fit a circular FOV.Then,the nonlinear adaptive controller is designed to estimate the changing aerodynamic parameters.The generalized extended state observer(GESO)is designed to estimate the acceleration of the maneuvering targets and the unmatched time-varying disturbances for improving tracking accuracy.Furthermore,the command filters are used to solve the"differential expansion"problem during the backstepping design.The Lyapunov theory is used to prove the stability of the overall closed-loop IEGC system.Finally,the simulation results validate the integrated system's effectiveness,achieving high accuracy strikes against maneuvering targets.展开更多
From the perspective of a community energy operator,a two-stage optimal scheduling model of a community integrated energy system is proposed by integrating information on controllable loads.The day-ahead scheduling an...From the perspective of a community energy operator,a two-stage optimal scheduling model of a community integrated energy system is proposed by integrating information on controllable loads.The day-ahead scheduling analyzes whether various controllable loads participate in the optimization and investigates the impact of their responses on the operating economy of the community integrated energy system(IES)before and after;the intra-day scheduling proposes a two-stage rolling optimization model based on the day-ahead scheduling scheme,taking into account the fluctuation of wind turbine output and load within a short period of time and according to the different response rates of heat and cooling power,and solves the adjusted output of each controllable device.The simulation results show that the optimal scheduling of controllable loads effectively reduces the comprehensive operating costs of community IES;the two-stage optimal scheduling model can meet the energy demand of customers while effectively and timely suppressing the random fluctuations on both sides of the source and load during the intra-day stage,realizing the economic and smooth operation of IES.展开更多
Inspired by the integrated guidance and control design for endo-atmospheric aircraft,the integrated position and attitude control of spacecraft has attracted increasing attention and gradually induced a wide variety o...Inspired by the integrated guidance and control design for endo-atmospheric aircraft,the integrated position and attitude control of spacecraft has attracted increasing attention and gradually induced a wide variety of study results in last over two decades,fully incorporating control requirements and actuator characteristics of space missions.This paper presents a novel and comprehensive survey to the coupled position and attitude motions of spacecraft from the perspective of dynamics and control.To this end,a systematic analysis is firstly conducted in details to show the position and attitude mutual couplings of spacecraft.Particularly,in terms of the time discrepancy between spacecraft position and attitude motions,space missions can be categorized into two types:space proximity operation and space orbital maneuver.Based on this classification,the studies on the coupled dynamic modeling and the integrated control design for position and attitude motions of spacecraft are sequentially summarized and analyzed.On the one hand,various coupled position and dynamic formulations of spacecraft based on various mathematical tools are reviewed and compared from five aspects,including mission applicability,modeling simplicity,physical clearance,information matching and expansibility.On the other hand,the development of the integrated position and attitude control of spacecraft is analyzed for two space missions,and especially,five distinctive development trends are captured for space operation missions.Finally,insightful prospects on future development of the integrated position and attitude control technology of spacecraft are proposed,pointing out current primary technical issues and possible feasible solutions.展开更多
Kiwifruit canker disease seriously affects the yield and quality of"Guichang"kiwifruit in Xiuwen County,Guizhou Province.In order to scientifically,safely,greenly and efficiently prevent and control the dise...Kiwifruit canker disease seriously affects the yield and quality of"Guichang"kiwifruit in Xiuwen County,Guizhou Province.In order to scientifically,safely,greenly and efficiently prevent and control the disease,theory was combined with prevention and control techniques to optimize existing prevention and control techniques,so as to improve the production yield and quality of kiwifruit.Specifically,biocontrol strains targeting local kiwifruit canker disease were screened,and reduced and mixed use of agrochemicals with improved efficiency was studied;and the effects and application techniques of disease resistance inducers and bioorganic fertilizers in inducing systemic disease resistance in kiwifruit trees were explored,and finally,an integrated green prevention and control scheme for kiwifruit canker disease that is suitable for kiwifruit production areas in Guizhou Province and has strong operability was proposed.This study provides technical support for green,efficient,standardized production technical services and sustainable and healthy development of kiwifruit industry.展开更多
In recent years,the exponential proliferation of smart devices with their intelligent applications poses severe challenges on conventional cellular networks.Such challenges can be potentially overcome by integrating c...In recent years,the exponential proliferation of smart devices with their intelligent applications poses severe challenges on conventional cellular networks.Such challenges can be potentially overcome by integrating communication,computing,caching,and control(i4C)technologies.In this survey,we first give a snapshot of different aspects of the i4C,comprising background,motivation,leading technological enablers,potential applications,and use cases.Next,we describe different models of communication,computing,caching,and control(4C)to lay the foundation of the integration approach.We review current stateof-the-art research efforts related to the i4C,focusing on recent trends of both conventional and artificial intelligence(AI)-based integration approaches.We also highlight the need for intelligence in resources integration.Then,we discuss the integration of sensing and communication(ISAC)and classify the integration approaches into various classes.Finally,we propose open challenges and present future research directions for beyond 5G networks,such as 6G.展开更多
Integrated guidance and control for homing missiles utilizing adaptive dynamic surface control approach is considered based on the three channels independence design idea. A time-varying integrated guidance and contro...Integrated guidance and control for homing missiles utilizing adaptive dynamic surface control approach is considered based on the three channels independence design idea. A time-varying integrated guidance and control model with unmatched uncertainties is first formulated for the pitch channel, and an adaptive dynamic surface control algorithm is further developed to deal with these unmatched uncertainties. It is proved that the proposed feedback controller can ensure not only the accuracy of target interception, but also the stability of the missile dynamics. Then, the same control approach is further applied to the control design of the yaw and roll channels. The 6-degree-of-freedom (6-DOF) nonlinear missile simulation results demonstrate the feasibility and advantage of the proposed integrated guidance and control design scheme.展开更多
Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approac...Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approach for missile with terminal impact angle constraint is proposed.First,a mathematical model of an integrated guidance and control model in pitch plane is established,and then nonlinear transformation is employed to transform the mathematical model into a standard form suitable for sliding mode control method design.A sufficient condition for the existence of linear sliding surface is given in terms of linear matrix inequalities(LMIs),based on which the corresponding reaching motion controller is also developed.To verify the effectiveness of the proposed integrated design scheme,the numerical simulation of missile is made.The simulation results demonstrate that the proposed guidance and control law can guide missile to hit the target with desired impact angle and desired flight attitude angle simultaneously.展开更多
Nowadays, a highly integrated valve?controlled cylinder(HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high?performance robot control, the hydraulic force system s...Nowadays, a highly integrated valve?controlled cylinder(HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high?performance robot control, the hydraulic force system still has problems, such as strong nonlinearity, and time?varying parameters. This makes HIVC force control very diffcult and complex. How to improve the control performance of the HIVC force control system and find the influence rule of the system parameters on the control performance is very significant. Firstly, the mathematical model of HIVC force control system is established. Then the mathematical expression for parameter sensitivity matrix is obtained by applying matrix sensitivity analysis(PSM). Then, aimed at the sinusoidal response under(three factors and three levels) working conditions, the simulation and the experiment are conducted. While the error between the simulation and experiment can’t be avoided. Therefore, combined with the range analysis, the error in the two performance indexes of sinusoidal response under the whole working condition is analyzed. Besides, the sensitivity variation pattern for each system parameter under the whole working condition is figured out. Then the two sensitivity indexes for the three system parameters, which are supply pressure, proportional gain and initial displacement of piston, are proved experimentally. The proposed method significantly reveals the sensitivity characteristics of HIVC force control system, which can make the contribution to improve the control performance.展开更多
Di erential braking and active steering have already been integrated to overcome their shortcomings. However, existing research mainly focuses on two-axle vehicles and controllers are mostly designed to use one contro...Di erential braking and active steering have already been integrated to overcome their shortcomings. However, existing research mainly focuses on two-axle vehicles and controllers are mostly designed to use one control method to improve the other. Moreover, many experiments are needed to improve the robustness; therefore, these control methods are underutilized. This paper proposes an integrated control system specially designed for multi-axle vehicles, in which the desired lateral force and yaw moment of vehicles are determined by the sliding mode control algorithm. The output of the sliding mode control is distributed to the suitable wheels based on the abilities and potentials of the two control methods. Moreover, in this method, fewer experiments are needed, and the robustness and simultaneity are both guaranteed. To simplify the optimization system and to improve the computation speed, seven simple optimization subsystems are designed for the determination of control outputs on each wheel. The simulation results show that the proposed controller obviously enhances the stability of multi-axle trucks. The system improves 68% of the safe velocity, and its performance is much better than both di erential braking and active steering. This research proposes an integrated control system that can simultaneously invoke di erential braking and active steering of multi-axle vehicles to fully utilize the abilities and potentials of the two control methods.展开更多
Tobacco black shank is one of the devastating diseases of tobacco. In recent years, this disease widely occurred in most tobacco-growing areas, which caused disastrous losses and has severely threatened the sustainabl...Tobacco black shank is one of the devastating diseases of tobacco. In recent years, this disease widely occurred in most tobacco-growing areas, which caused disastrous losses and has severely threatened the sustainable development of flue-cured tobacco. In order to lay a theoretical foundation for the better control of tobacco black shank, the occurrence characteristics and integrated control strategis of this disease were systematically discussed according to the aspects of agricultural control, chemical control, biological control, etc.展开更多
With the advantages of lightweight and high resource utilization,cloud-native technology with containers as the core is gradually becoming themainstreamtechnical architecture for information infrastructure.However,mal...With the advantages of lightweight and high resource utilization,cloud-native technology with containers as the core is gradually becoming themainstreamtechnical architecture for information infrastructure.However,malware attacks such as Doki and Symbiote threaten the container runtime’s security.Malware initiates various types of runtime anomalies based on process form(e.g.,modifying the process of a container,and opening the external ports).Fortunately,dynamic monitoring mechanisms have proven to be a feasible solution for verifying the trusted state of containers at runtime.Nevertheless,the current routine dynamic monitoring mechanisms for baseline data protection are still based on strong security assumptions.As a result,the existing dynamicmonitoringmechanismis still not practical enough.To ensure the trustworthiness of the baseline value data and,simultaneously,to achieve the integrity verification of the monitored process,we combine blockchain and trusted computing to propose a process integrity monitoring system named IPMS.Firstly,the hardware TPM 2.0 module is applied to construct a trusted security foundation for the integrity of the process code segment due to its tamper-proof feature.Then,design a new format for storing measurement logs,easily distinguishing files with the same name in different containers from log information.Meanwhile,the baseline value data is stored on the blockchain to avoidmalicious damage.Finally,trusted computing technology is used to perform fine-grained integrity measurement and remote attestation of processes in a container,detect abnormal containers in time and control them.We have implemented a prototype system and performed extensive simulation experiments to test and analyze the functionality and performance of the PIMS.Experimental results show that PIMS can accurately and efficiently detect tampered processes with only 3.57% performance loss to the container.展开更多
Combining with the development of automated manual transmission (AMT), the various throttle control demands are analyzed under different working conditions of AMT such as tracking acceleration pedal, start, shift an...Combining with the development of automated manual transmission (AMT), the various throttle control demands are analyzed under different working conditions of AMT such as tracking acceleration pedal, start, shift and so on. Based on simulation, the responding throttle control strategies are proposed, and a simple but effective throttle control method is presented. The testing results have proved that the strategies are effective for improving the pedal tracking precision and the qualities of start and shift.展开更多
Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring c...Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.展开更多
Severe epidemic of false smut, caused by Ustilaginoidea virens (Cooke) Takahashi (teleomorph Villosiclava virens) has been reported in different parts of Asia and America. Different fungicides or bio-control agent...Severe epidemic of false smut, caused by Ustilaginoidea virens (Cooke) Takahashi (teleomorph Villosiclava virens) has been reported in different parts of Asia and America. Different fungicides or bio-control agents against false smut were applied at different times before heading on a susceptible rice variety Pu-6. A control efficiency as high as 91.92% was resulted from spraying 2.5% Wenquning, a suspension of Bacillus subtilis in solution of validamycin with 4.5 L/hm2 at 6 d before heading. Among the 186 hybrid rice screened in 2010, low significant correlations between the dates of full heading, rates of infected plants and panicles as well as the number of infected florets were found, with the correlation coefficients ranging from 0.2331 to 0.5212. However, significant difference in susceptibility coefficients was also found between the varieties which had the same dates of full heading. In the plot experiments to compare the susceptibility in 2011, the average rates of infected panicles of Yixiangyou 2168, Chuanxiangyou 3, Dexiang 4103, Yixiangyou 2115, Nei5you 317, Yangxinyou 1 were significantly lower than those of the control varieties Gangyou 725 and Gangyou 188 at the disease nursery located at Qionglai, Sichuan Province, China. When Neixiangyou 8156 and Nei5you 317 were sprayed with 2.5% Wenquning at 4.5 L/hm2 for two times at 6 d before and 1 d after heading, respectively, the control efficiencies of Nei5you 317 and Neixiangyou 8156 were respectively 100% and 82.24% compared to that of Gangyou 725. Satisfactory control effects had also obtained by single spray of 2.5% Wenquning at 4.5 L/hm2 at 5-6 d before heading. Therefore, less susceptible hybrid rice in combination with spraying Wenquning at 5-6 d before heading was suggested for the disease control in Sichuan Province, China.展开更多
Based on fuzzy adaptive and dynamic surface(FADS),an integrated guidance and control(IGC)approach was proposed for large caliber naval gun guided projectile,which was robust to target maneuver,canard dynamic character...Based on fuzzy adaptive and dynamic surface(FADS),an integrated guidance and control(IGC)approach was proposed for large caliber naval gun guided projectile,which was robust to target maneuver,canard dynamic characteristics,and multiple constraints,such as impact angle,limited measurement of line of sight(LOS)angle rate and nonlinear saturation of canard deflection.Initially,a strict feedback cascade model of IGC in longitudinal plane was established,and extended state observer(ESO)was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system,including aerodynamic parameters perturbation,target maneuver and model errors.Secondly,aiming at zeroing LOS angle tracking error and LOS angle rate in finite time,a nonsingular terminal sliding mode(NTSM)was designed with adaptive exponential reaching law.Furthermore,combining with dynamic surface,which prevented the complex differential of virtual control laws,the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law.Finally,the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection.The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded,rigorously proven by Lyapunov stability theory.Hardware-in-the-loop simulation(HILS)and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.展开更多
The main disease species on poplar are introduced in this paper. The main content of the integrated control technique on poplar diseases is summarized:(1) Forecast technique based on the initial disease and provention...The main disease species on poplar are introduced in this paper. The main content of the integrated control technique on poplar diseases is summarized:(1) Forecast technique based on the initial disease and provention factors. (2) Control index is established, based on the relationship among the disease index, height of tree, diameter grade and the loss rate of volume. (3) Five fine varieties are selected according to three integrated indexes of host, such as resistance, volume growth and form ratio; They are 613 (Poulus alba ×P. berolinensis), A15 (P. xiaohei × P. euramericana CV. Polska-15A), A98 (P.xiaohei×(P. simonii×P. nigra) CV. A98), A102 (P. xiaohei) × (P. simonee × P. nigra) CV. A102), L2 (P. simonii × P nigra var. italica) in northeast Chnia. (4) Sivicultural control is known as the main protection measures, combined with chemical control and biocontrol,based on the disease forecast and control index by tracing the whole process of forest production.展开更多
A novel integrated guidance and control (IGC) design method is proposed to solve problems of low control accuracy for a suicide unmanned combat aerial vehicle (UCAV) in the terminal attack stage. First of all, the IGC...A novel integrated guidance and control (IGC) design method is proposed to solve problems of low control accuracy for a suicide unmanned combat aerial vehicle (UCAV) in the terminal attack stage. First of all, the IGC system model of the UCAV is built based on the three-channel independent design idea, which reduces the difficulties of designing the controller. Then, IGC control laws are designed using the trajectory linearization control (TLC). A nonlinear disturbance observer (NDO) is introduced to the IGC controller to reject various uncertainties, such as the aerodynamic parameter perturbation and the measurement error interference. The stability of the closed-loop system is proven by using the Lyapunov theorem. The performance of the proposed IGC design method is verified in a terminal attack mission of the suicide UCAV. Finally, simulation results demonstrate the superiority and effectiveness in the aspects of guidance accuracy and system robustness.展开更多
Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of ...Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of water, fertilizer and pesticide integrated automatic control device, the paper discusses selection and application of fertilizer pesticides, use procedure, water, fertilizer and pesticide saving effect and receptive crowd in the application process of modern planting industry, so as to provide the basis for promotion and popularization of water, fertilizer and pesticide integration.展开更多
As there exists sorts of distributed generators in microgrid, an integrated control strategy containing different control methods against corresponding generators should be applied. The strategy in this paper involves...As there exists sorts of distributed generators in microgrid, an integrated control strategy containing different control methods against corresponding generators should be applied. The strategy in this paper involves PQ control and droop control methods. The former aims at letting generators like PV output maximum power. The latter stems from inverter parallel technique and applies to controlling generators which can keep the network voltage steady to make the parallel system reach the minimum circulation point. Due to the unworthiness of droop control applied in low-voltage microgrid of which the impedance ratio is rather high, the paper adopts the droop control introducing virtual generator and virtual impedance. Based on theoretical analysis, simulation in Matlab is also implemented to verify the feasibility of the strategy.展开更多
文摘In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated estimation guidance and control nonlinear model with limited actuator deflection angle is established considering the seeker's FOV constraint.The boundary time-varying integral barrier Lyapunov function(IBLF)is employed in backstepping design to constrain the body line-of-sight(BLOS)in IEGC system to fit a circular FOV.Then,the nonlinear adaptive controller is designed to estimate the changing aerodynamic parameters.The generalized extended state observer(GESO)is designed to estimate the acceleration of the maneuvering targets and the unmatched time-varying disturbances for improving tracking accuracy.Furthermore,the command filters are used to solve the"differential expansion"problem during the backstepping design.The Lyapunov theory is used to prove the stability of the overall closed-loop IEGC system.Finally,the simulation results validate the integrated system's effectiveness,achieving high accuracy strikes against maneuvering targets.
基金supported in part by the National Natural Science Foundation of China(51977127)Shanghai Municipal Science and Technology Commission(19020500800)“Shuguang Program”(20SG52)Shanghai Education Development Foundation and Shanghai Municipal Education Commission.
文摘From the perspective of a community energy operator,a two-stage optimal scheduling model of a community integrated energy system is proposed by integrating information on controllable loads.The day-ahead scheduling analyzes whether various controllable loads participate in the optimization and investigates the impact of their responses on the operating economy of the community integrated energy system(IES)before and after;the intra-day scheduling proposes a two-stage rolling optimization model based on the day-ahead scheduling scheme,taking into account the fluctuation of wind turbine output and load within a short period of time and according to the different response rates of heat and cooling power,and solves the adjusted output of each controllable device.The simulation results show that the optimal scheduling of controllable loads effectively reduces the comprehensive operating costs of community IES;the two-stage optimal scheduling model can meet the energy demand of customers while effectively and timely suppressing the random fluctuations on both sides of the source and load during the intra-day stage,realizing the economic and smooth operation of IES.
基金supported by the National Science Foundation of China(61703437,52232014,61690210,61690212)。
文摘Inspired by the integrated guidance and control design for endo-atmospheric aircraft,the integrated position and attitude control of spacecraft has attracted increasing attention and gradually induced a wide variety of study results in last over two decades,fully incorporating control requirements and actuator characteristics of space missions.This paper presents a novel and comprehensive survey to the coupled position and attitude motions of spacecraft from the perspective of dynamics and control.To this end,a systematic analysis is firstly conducted in details to show the position and attitude mutual couplings of spacecraft.Particularly,in terms of the time discrepancy between spacecraft position and attitude motions,space missions can be categorized into two types:space proximity operation and space orbital maneuver.Based on this classification,the studies on the coupled dynamic modeling and the integrated control design for position and attitude motions of spacecraft are sequentially summarized and analyzed.On the one hand,various coupled position and dynamic formulations of spacecraft based on various mathematical tools are reviewed and compared from five aspects,including mission applicability,modeling simplicity,physical clearance,information matching and expansibility.On the other hand,the development of the integrated position and attitude control of spacecraft is analyzed for two space missions,and especially,five distinctive development trends are captured for space operation missions.Finally,insightful prospects on future development of the integrated position and attitude control technology of spacecraft are proposed,pointing out current primary technical issues and possible feasible solutions.
基金Supported by Science and Technology Support Program of Guizhou Province(QKHZC[2020]1Y135)General Higher Education Science and Technology Top-notch Talents Project of Guizhou Province(QJH KY Z[2021]037)+5 种基金Science and Technology Program of Guizhou Province(QKHJZ-ZK[2022]ZD 025)High-level Talent Scientific Research Startup Project of Guizhou Institute of Technology(XJGC20190632)Earth Thesis Project of Guizhou Institute of Technology(KJZX20-005)High-Level Talent Initial Funding of Guizhou Industry Polytechnic College(2023-RC-01)Enterprise Commissioned Project of Guizhou Industrial Polytechnic College(2023-HX-01)Enterprise Commissioned Project of Guizhou Industrial Polytechnic College(2023-HX-02).
文摘Kiwifruit canker disease seriously affects the yield and quality of"Guichang"kiwifruit in Xiuwen County,Guizhou Province.In order to scientifically,safely,greenly and efficiently prevent and control the disease,theory was combined with prevention and control techniques to optimize existing prevention and control techniques,so as to improve the production yield and quality of kiwifruit.Specifically,biocontrol strains targeting local kiwifruit canker disease were screened,and reduced and mixed use of agrochemicals with improved efficiency was studied;and the effects and application techniques of disease resistance inducers and bioorganic fertilizers in inducing systemic disease resistance in kiwifruit trees were explored,and finally,an integrated green prevention and control scheme for kiwifruit canker disease that is suitable for kiwifruit production areas in Guizhou Province and has strong operability was proposed.This study provides technical support for green,efficient,standardized production technical services and sustainable and healthy development of kiwifruit industry.
基金supported in part by National Key R&D Program of China(2019YFE0196400)Key Research and Development Program of Shaanxi(2022KWZ09)+4 种基金National Natural Science Foundation of China(61771358,61901317,62071352)Fundamental Research Funds for the Central Universities(JB190104)Joint Education Project between China and Central-Eastern European Countries(202005)the 111 Project(B08038)。
文摘In recent years,the exponential proliferation of smart devices with their intelligent applications poses severe challenges on conventional cellular networks.Such challenges can be potentially overcome by integrating communication,computing,caching,and control(i4C)technologies.In this survey,we first give a snapshot of different aspects of the i4C,comprising background,motivation,leading technological enablers,potential applications,and use cases.Next,we describe different models of communication,computing,caching,and control(4C)to lay the foundation of the integration approach.We review current stateof-the-art research efforts related to the i4C,focusing on recent trends of both conventional and artificial intelligence(AI)-based integration approaches.We also highlight the need for intelligence in resources integration.Then,we discuss the integration of sensing and communication(ISAC)and classify the integration approaches into various classes.Finally,we propose open challenges and present future research directions for beyond 5G networks,such as 6G.
基金supported by National Natural Science Foundation of China (No. 60710002, No. 60974044)
文摘Integrated guidance and control for homing missiles utilizing adaptive dynamic surface control approach is considered based on the three channels independence design idea. A time-varying integrated guidance and control model with unmatched uncertainties is first formulated for the pitch channel, and an adaptive dynamic surface control algorithm is further developed to deal with these unmatched uncertainties. It is proved that the proposed feedback controller can ensure not only the accuracy of target interception, but also the stability of the missile dynamics. Then, the same control approach is further applied to the control design of the yaw and roll channels. The 6-degree-of-freedom (6-DOF) nonlinear missile simulation results demonstrate the feasibility and advantage of the proposed integrated guidance and control design scheme.
基金supported by the Nationa Natural Science Foundation of China(60434010)Outstanding Youth Fund of Heilongjiang Province(JC200606)
文摘Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approach for missile with terminal impact angle constraint is proposed.First,a mathematical model of an integrated guidance and control model in pitch plane is established,and then nonlinear transformation is employed to transform the mathematical model into a standard form suitable for sliding mode control method design.A sufficient condition for the existence of linear sliding surface is given in terms of linear matrix inequalities(LMIs),based on which the corresponding reaching motion controller is also developed.To verify the effectiveness of the proposed integrated design scheme,the numerical simulation of missile is made.The simulation results demonstrate that the proposed guidance and control law can guide missile to hit the target with desired impact angle and desired flight attitude angle simultaneously.
基金Supported by National Natural Science Foundation of China(Grant No.51605417)Key Project of Hebei Provincial Natural Science Foundation,China(Grant No.E2016203264)State Key Laboratory of Fluid Power and Mechatronic Systems(Zhejiang University)Open Fund Project(Grant No.GZKF-201502)
文摘Nowadays, a highly integrated valve?controlled cylinder(HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high?performance robot control, the hydraulic force system still has problems, such as strong nonlinearity, and time?varying parameters. This makes HIVC force control very diffcult and complex. How to improve the control performance of the HIVC force control system and find the influence rule of the system parameters on the control performance is very significant. Firstly, the mathematical model of HIVC force control system is established. Then the mathematical expression for parameter sensitivity matrix is obtained by applying matrix sensitivity analysis(PSM). Then, aimed at the sinusoidal response under(three factors and three levels) working conditions, the simulation and the experiment are conducted. While the error between the simulation and experiment can’t be avoided. Therefore, combined with the range analysis, the error in the two performance indexes of sinusoidal response under the whole working condition is analyzed. Besides, the sensitivity variation pattern for each system parameter under the whole working condition is figured out. Then the two sensitivity indexes for the three system parameters, which are supply pressure, proportional gain and initial displacement of piston, are proved experimentally. The proposed method significantly reveals the sensitivity characteristics of HIVC force control system, which can make the contribution to improve the control performance.
基金National Natural Science Foundation of China(Grant No.51505178)China Postdoctoral Science Foundation(Grant No.2014M561289)
文摘Di erential braking and active steering have already been integrated to overcome their shortcomings. However, existing research mainly focuses on two-axle vehicles and controllers are mostly designed to use one control method to improve the other. Moreover, many experiments are needed to improve the robustness; therefore, these control methods are underutilized. This paper proposes an integrated control system specially designed for multi-axle vehicles, in which the desired lateral force and yaw moment of vehicles are determined by the sliding mode control algorithm. The output of the sliding mode control is distributed to the suitable wheels based on the abilities and potentials of the two control methods. Moreover, in this method, fewer experiments are needed, and the robustness and simultaneity are both guaranteed. To simplify the optimization system and to improve the computation speed, seven simple optimization subsystems are designed for the determination of control outputs on each wheel. The simulation results show that the proposed controller obviously enhances the stability of multi-axle trucks. The system improves 68% of the safe velocity, and its performance is much better than both di erential braking and active steering. This research proposes an integrated control system that can simultaneously invoke di erential braking and active steering of multi-axle vehicles to fully utilize the abilities and potentials of the two control methods.
基金Supported by Project of Yunnan Tobacco Company of Science and Technology(2014YN20)
文摘Tobacco black shank is one of the devastating diseases of tobacco. In recent years, this disease widely occurred in most tobacco-growing areas, which caused disastrous losses and has severely threatened the sustainable development of flue-cured tobacco. In order to lay a theoretical foundation for the better control of tobacco black shank, the occurrence characteristics and integrated control strategis of this disease were systematically discussed according to the aspects of agricultural control, chemical control, biological control, etc.
基金supported by China’s National Natural Science Foundation (U19A2081,61802270,61802271)Ministry of Education and China Mobile Research Fund Project (MCM20200102,CM20200409)Sichuan University Engineering Characteristic Team Project 2020SCUNG129.
文摘With the advantages of lightweight and high resource utilization,cloud-native technology with containers as the core is gradually becoming themainstreamtechnical architecture for information infrastructure.However,malware attacks such as Doki and Symbiote threaten the container runtime’s security.Malware initiates various types of runtime anomalies based on process form(e.g.,modifying the process of a container,and opening the external ports).Fortunately,dynamic monitoring mechanisms have proven to be a feasible solution for verifying the trusted state of containers at runtime.Nevertheless,the current routine dynamic monitoring mechanisms for baseline data protection are still based on strong security assumptions.As a result,the existing dynamicmonitoringmechanismis still not practical enough.To ensure the trustworthiness of the baseline value data and,simultaneously,to achieve the integrity verification of the monitored process,we combine blockchain and trusted computing to propose a process integrity monitoring system named IPMS.Firstly,the hardware TPM 2.0 module is applied to construct a trusted security foundation for the integrity of the process code segment due to its tamper-proof feature.Then,design a new format for storing measurement logs,easily distinguishing files with the same name in different containers from log information.Meanwhile,the baseline value data is stored on the blockchain to avoidmalicious damage.Finally,trusted computing technology is used to perform fine-grained integrity measurement and remote attestation of processes in a container,detect abnormal containers in time and control them.We have implemented a prototype system and performed extensive simulation experiments to test and analyze the functionality and performance of the PIMS.Experimental results show that PIMS can accurately and efficiently detect tampered processes with only 3.57% performance loss to the container.
基金This project is supported by Provincial Open Foundation of Key Lab forAutomobile of Jiangsu, China (No.KJS02076) and 985 Project of AutomotiveEngineering Innovation Platform of Jilin University, China.
文摘Combining with the development of automated manual transmission (AMT), the various throttle control demands are analyzed under different working conditions of AMT such as tracking acceleration pedal, start, shift and so on. Based on simulation, the responding throttle control strategies are proposed, and a simple but effective throttle control method is presented. The testing results have proved that the strategies are effective for improving the pedal tracking precision and the qualities of start and shift.
文摘Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.
基金supported by the Special Fund for Agroscientific Research in the Public Interest, China (Grant No. 200903039-5)the Sichuan Program for Major Crop, Poultry and Livestock Breeding, China (Grant No. 2012YZGG-25-3)
文摘Severe epidemic of false smut, caused by Ustilaginoidea virens (Cooke) Takahashi (teleomorph Villosiclava virens) has been reported in different parts of Asia and America. Different fungicides or bio-control agents against false smut were applied at different times before heading on a susceptible rice variety Pu-6. A control efficiency as high as 91.92% was resulted from spraying 2.5% Wenquning, a suspension of Bacillus subtilis in solution of validamycin with 4.5 L/hm2 at 6 d before heading. Among the 186 hybrid rice screened in 2010, low significant correlations between the dates of full heading, rates of infected plants and panicles as well as the number of infected florets were found, with the correlation coefficients ranging from 0.2331 to 0.5212. However, significant difference in susceptibility coefficients was also found between the varieties which had the same dates of full heading. In the plot experiments to compare the susceptibility in 2011, the average rates of infected panicles of Yixiangyou 2168, Chuanxiangyou 3, Dexiang 4103, Yixiangyou 2115, Nei5you 317, Yangxinyou 1 were significantly lower than those of the control varieties Gangyou 725 and Gangyou 188 at the disease nursery located at Qionglai, Sichuan Province, China. When Neixiangyou 8156 and Nei5you 317 were sprayed with 2.5% Wenquning at 4.5 L/hm2 for two times at 6 d before and 1 d after heading, respectively, the control efficiencies of Nei5you 317 and Neixiangyou 8156 were respectively 100% and 82.24% compared to that of Gangyou 725. Satisfactory control effects had also obtained by single spray of 2.5% Wenquning at 4.5 L/hm2 at 5-6 d before heading. Therefore, less susceptible hybrid rice in combination with spraying Wenquning at 5-6 d before heading was suggested for the disease control in Sichuan Province, China.
基金supported by Naval Weapons and Equipment Pre-Research Project(Grant No.3020801010105).
文摘Based on fuzzy adaptive and dynamic surface(FADS),an integrated guidance and control(IGC)approach was proposed for large caliber naval gun guided projectile,which was robust to target maneuver,canard dynamic characteristics,and multiple constraints,such as impact angle,limited measurement of line of sight(LOS)angle rate and nonlinear saturation of canard deflection.Initially,a strict feedback cascade model of IGC in longitudinal plane was established,and extended state observer(ESO)was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system,including aerodynamic parameters perturbation,target maneuver and model errors.Secondly,aiming at zeroing LOS angle tracking error and LOS angle rate in finite time,a nonsingular terminal sliding mode(NTSM)was designed with adaptive exponential reaching law.Furthermore,combining with dynamic surface,which prevented the complex differential of virtual control laws,the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law.Finally,the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection.The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded,rigorously proven by Lyapunov stability theory.Hardware-in-the-loop simulation(HILS)and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.
文摘The main disease species on poplar are introduced in this paper. The main content of the integrated control technique on poplar diseases is summarized:(1) Forecast technique based on the initial disease and provention factors. (2) Control index is established, based on the relationship among the disease index, height of tree, diameter grade and the loss rate of volume. (3) Five fine varieties are selected according to three integrated indexes of host, such as resistance, volume growth and form ratio; They are 613 (Poulus alba ×P. berolinensis), A15 (P. xiaohei × P. euramericana CV. Polska-15A), A98 (P.xiaohei×(P. simonii×P. nigra) CV. A98), A102 (P. xiaohei) × (P. simonee × P. nigra) CV. A102), L2 (P. simonii × P nigra var. italica) in northeast Chnia. (4) Sivicultural control is known as the main protection measures, combined with chemical control and biocontrol,based on the disease forecast and control index by tracing the whole process of forest production.
基金supported by the National Natural Science Foundation of China(6160150571501184)the National Aviation Science Foundation of China(20155196022)
文摘A novel integrated guidance and control (IGC) design method is proposed to solve problems of low control accuracy for a suicide unmanned combat aerial vehicle (UCAV) in the terminal attack stage. First of all, the IGC system model of the UCAV is built based on the three-channel independent design idea, which reduces the difficulties of designing the controller. Then, IGC control laws are designed using the trajectory linearization control (TLC). A nonlinear disturbance observer (NDO) is introduced to the IGC controller to reject various uncertainties, such as the aerodynamic parameter perturbation and the measurement error interference. The stability of the closed-loop system is proven by using the Lyapunov theorem. The performance of the proposed IGC design method is verified in a terminal attack mission of the suicide UCAV. Finally, simulation results demonstrate the superiority and effectiveness in the aspects of guidance accuracy and system robustness.
基金Supported by Science and Technology Program of Guangxi Province(GK AD19245169,GK AD18281072,GK AA17202037,GK AB16380164)。
文摘Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of water, fertilizer and pesticide integrated automatic control device, the paper discusses selection and application of fertilizer pesticides, use procedure, water, fertilizer and pesticide saving effect and receptive crowd in the application process of modern planting industry, so as to provide the basis for promotion and popularization of water, fertilizer and pesticide integration.
文摘As there exists sorts of distributed generators in microgrid, an integrated control strategy containing different control methods against corresponding generators should be applied. The strategy in this paper involves PQ control and droop control methods. The former aims at letting generators like PV output maximum power. The latter stems from inverter parallel technique and applies to controlling generators which can keep the network voltage steady to make the parallel system reach the minimum circulation point. Due to the unworthiness of droop control applied in low-voltage microgrid of which the impedance ratio is rather high, the paper adopts the droop control introducing virtual generator and virtual impedance. Based on theoretical analysis, simulation in Matlab is also implemented to verify the feasibility of the strategy.