Remarkable carbon dioxide catalytic capture (CDCC) leading to solid-form carbon material via a new CVD integrated process (CVD-IP): An alternative route for CO_2 sequestration

Through our newly-developed ＂chemical vapor deposition integrated process （ISVD-IP）＇＂ using carbon OlOXlae （t..u2） as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes （CO2-derived） at a quite high yield （the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base）. For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration （CCS） or CO2 mineralization （solidification）, etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.

Mathematical Modeling and a Multiswarm Collaborative Optimization Algorithm for Fuzzy Integrated Process Planning and Scheduling Problem

Considering both process planning and shop scheduling in manufacturing can fully utilize their complementarities,resulting in improved rationality of process routes and high-quality and efficient production. Hence,the study of Integrated Process Planning and Scheduling (IPPS) has become a hot topic in the current production field. However,when performing this integrated optimization,the uncertainty of processing time is a realistic key point that cannot be neglected. Thus,this paper investigates a Fuzzy IPPS (FIPPS) problem to minimize the maximum fuzzy completion time. Compared with the conventional IPPS problem,FIPPS considers the fuzzy process time in the uncertain production environment,which is more practical and realistic. However,it is difficult to solve the FIPPS problem due to the complicated fuzzy calculating rules. To solve this problem,this paper formulates a novel fuzzy mathematical model based on the process network graph and proposes a MultiSwarm Collaborative Optimization Algorithm (MSCOA) with an integrated encoding method to improve the optimization. Different swarms evolve in various directions and collaborate in a certain number of iterations. Moreover,the critical path searching method is introduced according to the triangular fuzzy number,allowing for the calculation of rules to enhance the local searching ability of MSCOA. The numerical experiments extended from the well-known Kim benchmark are conducted to test the performance of the proposed MSCOA. Compared with other competitive algorithms,the results obtained by MSCOA show significant advantages,thus proving its effectiveness in solving the FIPPS problem.

Integrated vacuum pressure swing adsorption and Rectisol process for CO_(2) capture from underground coal gasification syngas

An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.

Optimization of multi-objective integrated process planning and scheduling problem using a priority based optimization algorithm

For increasing the overall performance of modem manufacturing systems, effective integration of process planning and scheduling functions has been an important area of consideration among researchers. Owing to the complexity of handling process planning and scheduling simultaneously, most of the research work has been limited to solving the integrated process planning and scheduling （IPPS） problem for a single objective function. As there are many conflicting objectives when dealing with process planning and scheduling, real world problems cannot be fully captured considering only a single objective for optimization. Therefore considering multi-objective IPPS （MOIPPS） problem is inevitable. Unfortunately, only a handful of research papers are available on solving MOIPPS problem. In this paper, an optimization algorithm for solving MOIPPS problem is presented. The proposed algorithm uses a set of dispatch- ing rules coupled with priority assignment to optimize the IPPS problem for various objectives like makespan, total machine load, total tardiness, etc. A fixed sized external archive coupled with a crowding distance mechanism is used to store and maintain the non-dominated solutions. To compare the results with other algorithms, a C-matric based method has been used. Instances from four recent papers have been solved to demonstrate the effectiveness of the proposed algorithm. The experimental results show that the proposed method is an efficient approach for solving the MOIPPS problem.

Research on SAR data integrated processing methodology oriented on earth environment factor inversions

As an important advanced technique in the field of Earth observations,Synthetic Aperture Radar(SAR)plays a key role in the study of global environmental change,resources exploration,disaster mitigation,urban environments,and even lunar exploration.However,studies on imaging,image processing,and Earth factor inversions have often been conducted independently for a long time,which significantly limits the application effectiveness of SAR remote sensing due to the lack of an overall integrated design scheme and integrated information processing.Focusing on this SAR application issue,this paper proposes and describes a new SAR data processing methodology–SAR data integrated processing(DIP)oriented on Earth environment factor inversions.The simple definition,typical integrated modes and overall implementation ideas are introduced.Finally,focusing on building information extraction(man-made targets)and sea ice classification(natural targets)applications,three SAR DIP methods and experiments are conducted.Improved results are obtained under the guidance of the SAR DIP framework.Therefore,the SAR DIP theoretical framework and methodology represent a new SAR science application mode that has the capability to improve the SAR remote sensing quantitative application level and promote the development of new theories and methodologies.

An Architecture of Computer Aided Process Planning System Integrated with Scheduling Using Decision Support System

Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r Aided Process Planning (CAPP) is a step in this direction. Most of the existin g CAPP systems do not consider scheduling while generating a process plan. Sched uling is done separately after the process plan has been generated and therefore , it is possible that a process plan so generated is either not optimal or feasi ble from scheduling point of view. As process plans are generated without consid eration of job shop status, many problems arise within the manufacturing environ ment. Investigations have shown that 20%～30% of all process plans generated are not valid and have to be altered or suffer production delays when production sta rts. There is thus a major need for integration of scheduling with computer aide d process planning for generating more realistic process plans. In doing so, eff iciency of the manufacturing system as a whole is expected to improve. Decision support system performs many functions such as selection of machine too ls, cutting tools, sequencing of operations, determination of optimum cutting pa rameters and checking availability of machine tool before allocating any operati on to a machine tool. The process of transforming component data, process capabi lity and decision rules into computer readable format is still a major obstacle. This paper proposes architecture of a system, which integrates computer aided p rocess-planning system with scheduling using decision support system. A decisio n support system can be defined as " an interactive system that provides the use rs with easy access to decision models in order to support semi-structured or u nstructured decision making tasks".

A Process Oriented Integration Model for Smart Health Services

Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.

Recent Developments in the Continuous Processing of Steels

This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.

Global satisfactory control for nonlinear integrator processes with long delay

Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control （GSC） of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of

Anti-windup design for the controllers of integrating processes with long delay

For several superior controllers of the first-order integrating processes with long delay, the windup problems are analyzed in detail when the control signal saturates. The results show that these controllers have similar characteristics about the process input limitation. And then, a simple and effective anti-windup scheme, without an additional parameter, is designed for these controllers. Simulations run with three main controllers, and the results illustrate that the proposed method may achieve good performance under the nominal and model uncertainty cases.

Predictive functional control of integrating process based on impulse response

The predictive model is built according to the characteristics of the impulse response of integrating process. In order to eliminate the permanent offset between the setpoint and the process output in the presence of the load disturbance, a novel error compensation method is proposed. Then predictive functional control of integrating process is designed. The method given generates a simple control structure, which can significandy reduce online computation. Furthermore, the tuning of the controller is fairly straightforward. Simulation results indicate that the designed control system is relatively robust to the parameters variation of the process.

An integrated method for matching forest machinery and a weight-value adjustment

Proper matching of forestry machinery is important when raising mechanization levels for forestry production. In the matching process, forestry machinery needs not only expertise, but also improved methods for solving problems. I propose combination of case-based reasoning （CBR） and rule-based reasoning （RBR） by calculating the similarity of quantitative parameters of various forestry machines in an analytical and hierarchical process. I calculated the similarity of machin-ery used in forest industries to enable better selection and matching of equipment. I propose a weight-value adjusting method based on sums of squares of deviations in which the individual parameter weights were modified in the process of application. During the process of system design, I put forward a design method knowledge base and generated a dynamic web reasoning framework to integrate the processes of forest industry machinery selection and weight-value adjustment. This enables expansion of the scope of the complete system and enhancement of the reasoning efficiency. I demonstrate the validity and practicability of this method using a practical example.

SYMMETRIC INTEGRAL AND CANONICAL EXTENSION FOR JUMP PROCESS SOME COMBINATORIAL RESULTS

Using approximation technique, we introduce the concepts of canonical extension and symmetrio integral for jump process and obtain some results in the chaotic form.

Application Effect of Integrated Water and Fertilizer Technology for Tomato

Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole process of big and small tomatoes were studied,and their application effects were contrasted and analyzed,and application advantages and scopes of the two models were concluded.

Integrated adsorption and absorption process for post-combustion CO_(2) capture

This study explored the feasibility of integrating an adsorption and solvent scrubbing process for postcombustion CO_(2) capture from a coal-fired power plant.This integrated process has two stages:the first is a vacuum swing adsorption(VSA)process using activated carbon as the adsorbent,and the second stage is a solvent scrubber/stripper system using monoethanolamine (30 wt-%) as the solvent.The results showed that the adsorption process could enrich CO_(2) in the flue gas from 12 to 50 mol-% with a CO_(2) recovery of >90%,and the concentrated CO_(2) stream fed to the solvent scrubber had a significantly lower volumetric flowrate.The increased CO_(2) concentration and reduced feed flow to the absorption section resulted in significant reduction in the diameter of the solvent absorber,bringing the size of the absorber from uneconomically large to readily achievable domain.In addition,the VSA process could also remove most of the oxygen initially existed in the feed gas,alleviating the downstream corrosion and degradation problems in the absorption section.The findings in this work will reduce the technical risks associated with the state-of-the art solvent absorption technology for CO_(2) capture and thus accelerate the deployment of such technologies to reduce carbon emissions.

Key Techniques for the Development of Web-Based PDM System

Some key techniques for the development of web-based product data management （PDM） system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and implementation, including virtual data vault, flexible coding system, document management, product structure and configuration management, workflow/process and product maturity management. BITPDM can facilitate the activities from new product introduction phase to manufacturing, and manage the product data andtheir dynamic changing history. Based on Microsoft. NET, XML, web service and SOAP techniques, BITPDM realizes the integration and efficient management of product information.

Robust tuning method for modified smith predictor

A robust tuning method for ο^Astroem＇s two-degree of Freedom Modified Smith Predictor （MSP） is proposed, and it can achieve the fast setpoint and load disturbance responses independently. The tuning rules may meet the requirements within a certain delay margin according to the robustness theory. The simulation results illustrate that the tuning method is efficient compared with other controllers. Finally, the MSP controller is applied to the 15L batch fermentation system for controlling the temperature in bioreactor, and the experiment results further verify that the robust tuning rules may achieve good performance.

Progress and Prospects of Hydrogen Production: Opportunities and Challenges

This study presents an overview of the current status of hydrogen production in relation to the global requirement for energy and resources.Subsequently,it symmetrically outlines the advantages and disadvantages of various production routes including fossil fuel/biomass conversion,water electrolysis,microbial fermentation,and photocatalysis(PC),in terms of their technologies,economy,energy consumption,and costs.Considering the characteristics of hydrogen energy and the current infrastructure issues,it highlights that onsite production is indispensable and convenient for some special occasions.Finally,it briefly summarizes the current industrialization situation and presents future development and research directions,such as theoretical research strengthening,renewable raw material development,process coupling,and sustainable energy use.

DATA CONTEXT MODEL IN THE PRO-CESS INTEGRATION FRAMEWORK

Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model＇s classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language （XML） file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise＇s business logic as distributed services. The prototype system for the design of air filter is applied in an institute.

Bi-functional particles for integrated thermo-chemical processes:Catalysis and beyond

Particulate materials possessing dual functionalities have received tremendous investigations in many fields,owing to their superiority over mono-functional counterparts and their potential for process integration and intensification.This review focuses on bi-functional catalytic particles which also serve as sorbents/adsorbents or heat suppliers in the scheme of various thermo-chemical processes,enabling inherent separation or energy conservation within single-step operation.Bi-functional particles applied for integration of reaction and separation including sorption-enhanced hydrogen production and integrated capture and catalytic conversion processes are reviewed in detail,providing insights into material design and key performance indicators.On the other hand,bi-functional particles applied for integration of reaction and non-thermal radiation heating,including electrothermal and photothermal assisted heterogeneously catalyzed reactions,are also reviewed,with emphasis on the material property and energy efficiency improvement.These bi-functional particles show broad adaptability and feasibility in various reactions operated in integrated and intensified schemes,affording huge potentials for further improving productivity and efficiency in thermo-chemical processes.