The quantitative rules of the transfer and variation of errors,when the Gaussian integral functions F.(z) are evaluated sequentially by recurring,have been expounded.The traditional viewpoint to negate the applicabili...The quantitative rules of the transfer and variation of errors,when the Gaussian integral functions F.(z) are evaluated sequentially by recurring,have been expounded.The traditional viewpoint to negate the applicability and reliability of upward recursive formula in principle is amended.An optimal scheme of upward-and downward-joint recursions has been developed for the sequential F(z) computations.No additional accuracy is needed with the fundamental term of recursion because the absolute error of Fn(z) always decreases with the recursive approach.The scheme can be employed in modifying any of existent subprograms for Fn<z> computations.In the case of p-d-f-and g-type Gaussians,combining this method with Schaad's formulas can reduce,at least,the additive operations by a factor 40%;the multiplicative and exponential operations by a factor 60%.展开更多
In this paper, the unsteady cavitating turbulent flow around a marine propeller is simulated based on the unsteady Reynolds averaged Navier-Stokes(URANS) with emphasis on the hull-propeller interaction by an integral ...In this paper, the unsteady cavitating turbulent flow around a marine propeller is simulated based on the unsteady Reynolds averaged Navier-Stokes(URANS) with emphasis on the hull-propeller interaction by an integral calculation approach, which means the propeller and hull are treated as a whole when the cavitating flow is calculated. The whole calculational domain is split to an inner rotating domain containing a propeller and an outer domain containing a hull. And the two split sections are connected together in ANSYS CFX by using the GGI interfaces and the transient rotor stator frame change/mixing model. The alternate rotation model is employed for the advection term in the momentum equations in order to reduce the numerical error. Comparison of predictions with measurements shows that the propeller thrust coefficient can be predicted satisfactorily. The unsteady cavitating flow around the propeller behind the ship hull wake shows quasi-periodic features including cavity inception, growth and shrinking. These features are effectively reproduced in the simulations which compare well to available experimental data. In addition, significant pressure fluctuations on the ship hull surface induced by the unsteady propeller cavitation are compared with experimental data at monitoring points on the hull surface. The predicted amplitudes of the first components corresponding to the first blade passing frequencies match well with the experimental data. The maximum error between the predictions and the experimental data for the pressure pulsations is around 8%, which is acceptable in most engineering applications.展开更多
The modeling and multi-energy flow calculation of an integrated energy system (IES) are the bases of its operation and planning. This paper establishes the models of various energy sub-systems and the coupling equipme...The modeling and multi-energy flow calculation of an integrated energy system (IES) are the bases of its operation and planning. This paper establishes the models of various energy sub-systems and the coupling equipment for an electricity-gas-thermal IES, and an integrated multi-energy flow calculation model of the IES is constructed. A simplified calculation method for the compressor model in a natural gas network, one which is not included in a loop and works in constant compression ratio mode, is also proposed based on the concept of model reduction. In addition, a numerical conversion method for dealing with the conflict between nominal value and per unit value in the multi-energy flow calculation of IES is described. A case study is given to verify the correctness and speed of the proposed method, and the electricity-gas-thermal coupling interaction characteristics among sub-systems are studied.展开更多
The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a stea...The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a steady integral panel method that treats the forward and aft propellers as a whole part is presented.During the study,the control equation of the steady integral panel method for CRP is derived in detail.From the experience of developing an integral panel method for CRP,the characteristics of panel singularity strength in HCRSP propulsor was analyzed.Based on this analysis,an integral panel method for HCRSP propulsor is developed and the wake model discussed.Then,the method is applied in the performance analysis of HCRSP propulsor.Comparison between experimental data and numerical results shows that the steady integral panel method has good accuracy in terms of open water performance.Regarding the latter,the error source in the steady integral panel method is discussed.展开更多
文摘The quantitative rules of the transfer and variation of errors,when the Gaussian integral functions F.(z) are evaluated sequentially by recurring,have been expounded.The traditional viewpoint to negate the applicability and reliability of upward recursive formula in principle is amended.An optimal scheme of upward-and downward-joint recursions has been developed for the sequential F(z) computations.No additional accuracy is needed with the fundamental term of recursion because the absolute error of Fn(z) always decreases with the recursive approach.The scheme can be employed in modifying any of existent subprograms for Fn<z> computations.In the case of p-d-f-and g-type Gaussians,combining this method with Schaad's formulas can reduce,at least,the additive operations by a factor 40%;the multiplicative and exponential operations by a factor 60%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11772239,51822903 and 91752105)the Natural Science Foundation of Hubei Province(Grant Nos.2017CFA048,2018CFA010)
文摘In this paper, the unsteady cavitating turbulent flow around a marine propeller is simulated based on the unsteady Reynolds averaged Navier-Stokes(URANS) with emphasis on the hull-propeller interaction by an integral calculation approach, which means the propeller and hull are treated as a whole when the cavitating flow is calculated. The whole calculational domain is split to an inner rotating domain containing a propeller and an outer domain containing a hull. And the two split sections are connected together in ANSYS CFX by using the GGI interfaces and the transient rotor stator frame change/mixing model. The alternate rotation model is employed for the advection term in the momentum equations in order to reduce the numerical error. Comparison of predictions with measurements shows that the propeller thrust coefficient can be predicted satisfactorily. The unsteady cavitating flow around the propeller behind the ship hull wake shows quasi-periodic features including cavity inception, growth and shrinking. These features are effectively reproduced in the simulations which compare well to available experimental data. In addition, significant pressure fluctuations on the ship hull surface induced by the unsteady propeller cavitation are compared with experimental data at monitoring points on the hull surface. The predicted amplitudes of the first components corresponding to the first blade passing frequencies match well with the experimental data. The maximum error between the predictions and the experimental data for the pressure pulsations is around 8%, which is acceptable in most engineering applications.
基金supported by National Natural Science Foundation of China(52077193).
文摘The modeling and multi-energy flow calculation of an integrated energy system (IES) are the bases of its operation and planning. This paper establishes the models of various energy sub-systems and the coupling equipment for an electricity-gas-thermal IES, and an integrated multi-energy flow calculation model of the IES is constructed. A simplified calculation method for the compressor model in a natural gas network, one which is not included in a loop and works in constant compression ratio mode, is also proposed based on the concept of model reduction. In addition, a numerical conversion method for dealing with the conflict between nominal value and per unit value in the multi-energy flow calculation of IES is described. A case study is given to verify the correctness and speed of the proposed method, and the electricity-gas-thermal coupling interaction characteristics among sub-systems are studied.
基金The present work is supported by the National Natural Science Foundation of China(Grant no.51479207).
文摘The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a steady integral panel method that treats the forward and aft propellers as a whole part is presented.During the study,the control equation of the steady integral panel method for CRP is derived in detail.From the experience of developing an integral panel method for CRP,the characteristics of panel singularity strength in HCRSP propulsor was analyzed.Based on this analysis,an integral panel method for HCRSP propulsor is developed and the wake model discussed.Then,the method is applied in the performance analysis of HCRSP propulsor.Comparison between experimental data and numerical results shows that the steady integral panel method has good accuracy in terms of open water performance.Regarding the latter,the error source in the steady integral panel method is discussed.