The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In th...The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.展开更多
Interference layer metallography was used to identify the phases present in the aluminide coating on superalloy IN738LC. They are: two intermetallic aluminides NiAl and Ni_3Al, y-solid solution and a Cr-rich solid sol...Interference layer metallography was used to identify the phases present in the aluminide coating on superalloy IN738LC. They are: two intermetallic aluminides NiAl and Ni_3Al, y-solid solution and a Cr-rich solid solution, two sulphides M_(23)C_6 and MC, and two sulphides (Al,Cr)_3S_4 and (Cr,Ti)_3S_4. ZnS and ZnSe are proposed to be vapor deposited onto the surface of the specimen to get good colour contrast and good light-dark contrast. The refractive index and absorption coefficient of all these phases have been detemined.展开更多
X oilfield is a typical layered reservoir with a large vertical span and many oil-bearing formations. There are significant differences in reservoir types and fluid properties among various formations. The interlayer ...X oilfield is a typical layered reservoir with a large vertical span and many oil-bearing formations. There are significant differences in reservoir types and fluid properties among various formations. The interlayer interference is severe in the development process. At present, the interlayer interference research based on dynamic monitoring data cannot meet development adjustment needs. Combined with the field test results, through the indoor physical simulation experiment method, dynamic inversion method, and reservoir engineering method, this paper analyzes the main control factors and interference mechanism of interlayer interference, studies the variation law of interference coefficient, improves and forms the quantitative characteristic Theory of interlayer interference in multi-layer commingled production, and provides theoretical guidance for the total adjustment of the middle strata division in the oilfield.展开更多
Multi-layer pressure vessels are widely used in every field of high pressure technology.For the purpose of enhancing a vessels＇ load bearing capacity,a beneficial process like shrink-fit is usually employed.However,f...Multi-layer pressure vessels are widely used in every field of high pressure technology.For the purpose of enhancing a vessels＇ load bearing capacity,a beneficial process like shrink-fit is usually employed.However,few documents on optimum design for multi-layer shrink-fit vessels made of different strength materials can be found,available data are mainly on two-layer vessels.In this paper,an optimum design approach is developed for shrink-fit multi-layer vessels under ultrahigh pressure by using different materials.Maximum shear stress theory is applied as design criteria.The inner and outer radii of a multi-layer vessel,as well as the material of each layer,are assumed to be known.The optimization mathematical model is,thereby,built.Lagrange multipliers method is required to obtain the optimal design formula of wall ratio（ratio of outer to inner radii） of each layer,from which the optimum formulas of shrinkage pressure and radial interference are derived with the superposition principle employed.These formulas are applicable for the optimization design of all multi-layer vessels made of different materials,or same materials.The formulas of the limit working pressure and the contact pressure show that the optimum wall ratio of each layer and limit working pressure are only related to all selected material strength and unrelated to the position of the layer placement in the vessel.However,shrinkage pressure is related to the position of the layer placement in the vessel.Optimization design of an open ended shrink-fit three-layer vessel using different materials and comparisons proved that the optimized multi-layer vessels have outstanding characteristics of small radial interference and are easier for assembly.When the stress of each layer is distributed more evenly and appropriately,the load bearing capability and safety of vessels are enhanced.Therefore,this design is material-saving and cost-effective,and has prospect of engineering application.展开更多
The structure and trubulence phenomena of multiple shock wave /turbulent boundary layer interaction (MSW-TBLI) in a square duct were investigated using flow visualization methods and a two-component Laser Doppler Velo...The structure and trubulence phenomena of multiple shock wave /turbulent boundary layer interaction (MSW-TBLI) in a square duct were investigated using flow visualization methods and a two-component Laser Doppler Velocimeter (LDV ). First - the MSW-TBLI was visualized by schlieren photography and laser holographic interferography. Second, the time-mean and fluctuating velocities in the MSW-TBLI were explored in detail using LDV Spatial distributions of turbulence intensity,Reynolds shear stress and turbulence kinetic energy are presented.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.U21A2093)the Anhui Provincial Natural Science Foundation(No.2308085QE146)the National Natural Science Foundation of Jiangsu Province(No.BK20210894).
文摘The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.
文摘Interference layer metallography was used to identify the phases present in the aluminide coating on superalloy IN738LC. They are: two intermetallic aluminides NiAl and Ni_3Al, y-solid solution and a Cr-rich solid solution, two sulphides M_(23)C_6 and MC, and two sulphides (Al,Cr)_3S_4 and (Cr,Ti)_3S_4. ZnS and ZnSe are proposed to be vapor deposited onto the surface of the specimen to get good colour contrast and good light-dark contrast. The refractive index and absorption coefficient of all these phases have been detemined.
文摘X oilfield is a typical layered reservoir with a large vertical span and many oil-bearing formations. There are significant differences in reservoir types and fluid properties among various formations. The interlayer interference is severe in the development process. At present, the interlayer interference research based on dynamic monitoring data cannot meet development adjustment needs. Combined with the field test results, through the indoor physical simulation experiment method, dynamic inversion method, and reservoir engineering method, this paper analyzes the main control factors and interference mechanism of interlayer interference, studies the variation law of interference coefficient, improves and forms the quantitative characteristic Theory of interlayer interference in multi-layer commingled production, and provides theoretical guidance for the total adjustment of the middle strata division in the oilfield.
基金supported by Key Scientific Research Project of Baoji University of Arts and Sciences of China (Grant No.ZK0727)Shanxi Provincial Special Foundation Project of Key Discipline Construction of China
文摘Multi-layer pressure vessels are widely used in every field of high pressure technology.For the purpose of enhancing a vessels＇ load bearing capacity,a beneficial process like shrink-fit is usually employed.However,few documents on optimum design for multi-layer shrink-fit vessels made of different strength materials can be found,available data are mainly on two-layer vessels.In this paper,an optimum design approach is developed for shrink-fit multi-layer vessels under ultrahigh pressure by using different materials.Maximum shear stress theory is applied as design criteria.The inner and outer radii of a multi-layer vessel,as well as the material of each layer,are assumed to be known.The optimization mathematical model is,thereby,built.Lagrange multipliers method is required to obtain the optimal design formula of wall ratio（ratio of outer to inner radii） of each layer,from which the optimum formulas of shrinkage pressure and radial interference are derived with the superposition principle employed.These formulas are applicable for the optimization design of all multi-layer vessels made of different materials,or same materials.The formulas of the limit working pressure and the contact pressure show that the optimum wall ratio of each layer and limit working pressure are only related to all selected material strength and unrelated to the position of the layer placement in the vessel.However,shrinkage pressure is related to the position of the layer placement in the vessel.Optimization design of an open ended shrink-fit three-layer vessel using different materials and comparisons proved that the optimized multi-layer vessels have outstanding characteristics of small radial interference and are easier for assembly.When the stress of each layer is distributed more evenly and appropriately,the load bearing capability and safety of vessels are enhanced.Therefore,this design is material-saving and cost-effective,and has prospect of engineering application.
文摘The structure and trubulence phenomena of multiple shock wave /turbulent boundary layer interaction (MSW-TBLI) in a square duct were investigated using flow visualization methods and a two-component Laser Doppler Velocimeter (LDV ). First - the MSW-TBLI was visualized by schlieren photography and laser holographic interferography. Second, the time-mean and fluctuating velocities in the MSW-TBLI were explored in detail using LDV Spatial distributions of turbulence intensity,Reynolds shear stress and turbulence kinetic energy are presented.
