Experimental study on the shear behavior of the interface between cushion materials and the concrete raft

Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include： 1） under monotonic loading, P_v is the most significant factor; the shear resistance P_（hmax） increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2） for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_（max） varies from 3 mm to 15 mm; 3） under cyclic loading, the interface behavior can be abstracted as a ＂three-segment＂ back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4） by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.

Stability analysis of shallow tunnels subjected to eccentric loads by a boundary element method

This paper presents the results of the shear strength（frictional strength） of cemented paste backfillcemented paste backfill（CPB-CPB） and cemented paste backfillerock wall（CPB-rock） interfaces. The frictional behaviors of these interfaces were assessed for the short-term curing times（3 d and 7 d） using a direct shear apparatus RDS-200 from GCTS（Geotechnical Consulting ＆ Testing Systems）. The shear（friction） tests were performed at three different constant normal stress levels on flat and smooth interfaces. These tests aimed at understanding the mobilized shear strength at the CPB-rock and CPB-CPB interfaces during and/or after open stope filling（no exposed face）. The applied normal stress levels were varied in a range corresponding to the usually measured in-situ horizontal pressures（longitudinal or transverse） developed within paste-filled stopes（uniaxial compressive strength, s c 150 k Pa）. Results show that the mobilized shear strength is higher at the CPB-CPB interface than that at the CPB-rock interface. Also, the perfect elastoplastic behaviors observed for the CPB-rock interfaces were not observed for the CPB-CPB interfaces with low cement content which exhibits a strain-hardening behavior. These results are useful to estimate or validate numerical model for pressures determination in cemented backfill stope at short term. The tests were performed on real backfill and granite. The results may help understanding the mechanical behavior of the cemented paste backfill in general and, in particular, analyzing the shear strength at backfillebackfill and backfill-rock interfaces.