GNSS array receiver faced with overloaded interferences:anti-jamming performance and the incident directions of interferences

Anti-jamming solutions based on antenna arrays enhance the anti-jamming ability and the robustness of global navigation satellite system(GNSS)receiver remarkably.However,the performance of the receiver will deteriorate significantly in the overloaded interferences scenario.We define the overloaded interferences scenario as where the number of interferences is more than or equal to the number of antenna arrays elements.In this paper,the effect mechanism of interferences with different incident directions is found by studying the anti-jamming performance of the adaptive space filter.The theoretical analysis and conclusions,which are first validated through numerical examples,reveal the relationships between the optimal weight vector and the eigenvectors of the input signal autocorrelation matrix,the relationships between the interference cancellation ratio(ICR),the signal to interference and noise power ratio(SINR)of the adaptive space filter output and the number of interferences,the eigenvalues of the input signal autocorrelation matrix.In addition,two simulation experiments are utilized to further corroborate the theoretical findings through soft anti-jamming receiver.The simulation results match well with the theoretical analysis results,thus validating the effect mechanism of overloaded interferences.The simulation results show that,for a four elements circular array,the performance difference is up to 19 dB with different incident directions of interferences.Anti-jamming performance evaluation and jamming deployment optimization can obtain more accurate and efficient results by using the conclusions.

Multiple interferences suppression with space-polarization null-decoupling for polarimetric array

The adaptive digital beamforming technique in the space-polarization domain suppresses the interference with forming the coupling nulls of space and polarization domain.When there is the interference in mainlobe,it will cause serious mainlobe distortion,that the target detection suffers from.To overcome this problem and make radar cope with the complex multiple interferences scenarios,we propose a multiple mainlobe and/or sidelobe interferences suppression method for dual polarization array radar.Specifically,the proposed method consists of a signal preprocessing based on the proposed angle estimation with degree of polarization(DoP),and a filtering criterion based on the proposed linear constraint.The signal preprocessing provides the accurate estimated parameters of the interference,which contributes to the criterion for null-decoupling in the space-polarization domain of mainlobe.The proposed method can reduce the mainlobe distortion in the space-polarization domain while suppressing the multiple mainlobe and/or sidelobe interferences.The effectiveness of the proposed method is verified by simulations.

CERTAIN NATIVE LANGUAGE INTERFERENCES IN SECOND LANGUAGE ACQUISITION

Here we refer the native language to Chinese and the second language to English especially college English. According to linguistic study, there are certain native language interferences in secondlanguage acquisition when one is learning the second language,i. e. when a Chinese is learningEnglish, due to the influence of mother tongue which is habitually applied in learning the second language, his pronounciation, his grammar and his vocabulary are quite likely influencedor interfered by his native language or his dialect. Unfortunately, we did find certain first language interferences in our English teaching and learning processes on various items or subjects.

On Broadband Adaptive Beamforming in the Presence of Correlated Interferences

A novel approach of unitarily interpolated array MVDR （UIA-MVDR） is proposed, aiming at avoiding the signal cancellation caused by broadband signal-correlated interferences. UIA-MVDR belongs to the classic approaches of spectral averaging. However, it is distinguished from the conventional interpolated array MVDR （IA-MVDR） by two points： 1） It imposes a unitary constraint on the transform matrices. 2） It only optimizes the worst-case performance of array manifold approximation. As a result, the restriction on the order of Bessel function expansion is released, so that very accurate approximation can be achieved even in the case of small or middle arrays. Compared with many related approaches, UIA-MVDR destroys the correlation more completely and then achieves better performance. Its excellent performance in both correlated and uncorrelated broadband interferences suppression is confirmed via a n umber of numerical examples.

Quantum interferences in four-wave mixing processes inside a cavity driven by quantized fields

Interferences in the quantum fluctuations of the output fields are demonstrated in four-wave mixing processes inside a cavity, which is driven by two quantized fields at the signal and the idler frequencies. These interferences depend on the phase fluctuations of the input fields and induce mode splitting in the transmission spectra.

A Pragmatic Approach to Coping with Matrix Effects during ICP-MS Analysis of Trace Elements in Silicate Rocks and Calibration of REE Interferences

Operating an Agilent 7700X ICP-MS spectrometer under robust plasma conditions (1550 W) with a He-filled octopole collision cell and analysing solutions (?1 total dissolved solids) still suffered analyte peak suppression due to matrix effects. International reference rocks BCR-1, BHVO-1, AGV-1, G-2 and BCR-2 all showed count rate reductions for 36 elements (mass range 7Li to 238U) averaging ~10% but with no dependence on isotope mass. Use of an internal standard (103Rh) and/or using a ten-fold dilution of sample solutions reduced these effects but problems with reduced count rates combined with larger errors for some elements introduced other problems. The best approach was to normalise the count rates for each element in the other samples against those for BCR-1 as an external standard;thus the count suppression due to the matrix effect is corrected for each individual element. This approach provides standardization “traceability” in line with the ERM ISO/IEC requirement. Experiments are also reported on quantifying the proportions of Ba and selected REE oxide/hydroxide components versus parent isotopes (XO/X and XOH/X). This information is essential for correcting peak interferences on higher mass number REE for the rock samples, and equations are developed to use measured CeO/Ce and CeOH/Ce ratios to predict such values for any other member of the REE suite. Concentrations obtained show excellent agreement with recommended values for the international reference materials especially for the REE. Robust data are also provided for two other standard rocks: nepheline syenite STM-1 and quartz syenite CAAS-1;the latter shows exceptional enrichments of Zr, REE, Th, and U.

4-4 Double-slit Interferences Observed in Dielectronic Transitions in Collisions of H2+ on Helium

Young's double-slit interference is a clear manifestation of the wave character of light. The feasibility of an atomicversion of Young's double slit experiment for matter waves in ion-atom collisions was first discussed theoreticallyby Tuan and Gerjuoy in 1960[1]. They studied capture processes in collisions of protons with H2 and suggestedthat diffraction of the protons from the two atomic centers of the molecule could lead to interference effects. Suchinterference effects are more difficult to observe in ionization processes, since there the final state of the collisioninvolves at least three unbound particles. The experimental observation of this process is particularly challengingbecause the determination of the phase angle in such processes is not straightforward.

Application of pseudo-random frequency domain electromagnetic method in mining areas with strong interferences

Due to the strong electromagnetic interferences and human interference,traditional electromagnetic methods cannot obtain high quality resistivity data of mineral deposits in Chinese mines.The wide field electromagnetic method(WFEM),in which the pseudo-random signal is taken as the transmitter source,can extract high quality resistivity data in areas with sever interference by only measuring the electric field component.We use the WFEM to extract the resistivity information of the Dongguashan mine in southeast China.Compared with the audio magnetotelluric(AMT)method,and the controlled source audio-frequency magnetotelluric(CSAMT) method,the WFEM can obtain data with higher quality and simpler operations.The inversion results indicate that the WFEM can accurately identify the location of the main ore-body,which can be used for deep mine exploration in areas with strong interference.

Interferences in Photodetachment of a Negative Molecular Ion Model

By employing a two-center model, the total and differential cross sections in the photodetachment of ＂a negative molecular ion＂ are studied theoreticedly and obtained for the case of light polarization paredlel to the molecular axis. We find that in contrast to the smooth behavior of the total cross section for perpendicular polarized light, the cross section for parallel polarized light shows an interesting oscillatory structure. The oscillations in the toted cross section may provide a method to determine the distance between the two centers. We explain the oscillation in the toted cross section as an interference effect using closed-orbit theory. We also cedculated the detached-electron flux distributions on a screen placed at a large distance from the negative molecular ion. The distributions display multiple-ring-like interference patterns. Such interference patterns are similar to those in the photodetachment microscopy experiments.

Interferences in Photodetachment of a Negative Molecular Ion

The photodetachment of a negative molecular ion is studied theoretically using a two-center model. The detached electron wave function is obtained as a superposition of two coherent waves originating from each center. The photo-detached electron flux is evaluated on a screen placed at a large distance from the negative molecular ion. The electron flux on the screen displays strong interferences, the peak positions are related to the distance between the two centers in the negative molecular ion. We a/so obtained a simple analytical formula for the total photodetachment cross section. It approaches one and two times of the cross section for the one-center system in the high and lowphoton energy limits respectively.

Inter-well interferences and their influencing factors during water flooding in fractured-vuggy carbonate reservoirs

Based on the characteristics of injection-production units in fractured-vuggy carbonate reservoirs,nine groups of experiments were designed and performed to analyze the interference characteristics and their influencing factors during water flooding.Based on percolation theory,an inversion model for simulating waterflooding interferences was proposed to study the influence laws of different factors on interference characteristics.The results show that well spacing,permeability ratio,cave size,and cave location all affect the interference characteristics of water flooding.When the cave is located in high permeability fractures,or in the small well spacing direction,or close to the producer in an injection-production unit,the effects of water flooding are much better.When the large cave is located in the high-permeability or small well spacing direction,the well in the direction with lower permeability or smaller well spacing will see water breakthrough earlier.When the cave is in the higher permeability direction and the reserves between the water injector and producer differ greatly,the conductivity differences in different injection-production directions are favorable for water flooding.When the injection-production well pattern is constructed or recombined,it’s better to make the reserves of caves in different injection-production directions proportional to permeability,and inversely proportional to the well spacing.The well close to the cave should be a producer,and the well far from the cave should be an injector.Different ratios of cave reserves to fracture reserves correspond to different optimal well spacings and optimal permeability ratios.Moreover,both optimal well spacing and optimal permeability ratio increase as the ratio of cave reserves to fracture reserves increases.

Interferences in photo-detached electron spectra from a non-collinear tri-atomic anion

The electron flux oscillations in photo-detachment of a non-collinear tri-atomic anion have been studied by taking each atom of the system as a coherent source of detached-electron wave. These electron waves traversing along three different trajectories result in a quantum interference. An analytical expression of detached-electron flux is evaluated for various detached-electron energies and for different geometrical shapes of the system. The results show that the electron flux distributions exhibit molecular shape-induced oscillatory structures. These oscillations are explained using the semi- classical closed-orbit theory; the outgoing electron waves produced from one center are propagated in the vicinity of the sources at other centers. It is also observed that in a particular case our non-collinear tri-atomic system reduces to the collinear tri-atomic system recently published.

RESEARCH ON REAL-TIME CORRECTOR OF SPECTRAL INTERFERENCES

Further advancement of ICP-AES analytical technique is hindered by complex spec-tral interferences.The correction algorithms recently proposed need too much computation andtime to run in real time on general microcomputers.In this paper,a new kind of spectral interfer-ence fast correcting system(SIFCS)was developed,in which the hardware is a TMS32020 digitalsignal processing board in IBM-PC I/O channel and the software is composed of a correctingprogram based on a new effective algorithm and a master program on IBM-PC.Experimentsshow that the processing speed on SIFCS is 50-100 times faster than that on IBM-PC/AT.Thismakes real-time correction of spectral interferences feasible.

Wavelet packet decomposition entropy threshold method for discrete spectrum interferences rejection of on-line partial discharge monitoring

The frequency domain division theory of dyadic wavelet decomposition and wavelet packet decomposition (WPD) with orthogonal wavelet base frame are presented. The WPD coefficients of signals are treated as the outputs of equivalent bandwidth filters with different center frequency. The corresponding WPD entropy values of coefficients increase sharply when the discrete spectrum interferences (DSIs), frequency spectrum of which is centered at several frequency points existing in some frequency region. Based on WPD, an entropy threshold method (ETM) is put forward, in which entropy is used to determine whether partial discharge (PD) signals are interfered by DSIs. Simulation and real data processing demonstrate that ETM works with good efficiency, without pre-knowing DSI information. ETM extracts the phase of PD pulses accurately and can calibrate the quantity of single type discharge.

Design principle for parameters and interferences of tungsten carbide insert interface on roller bits

The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.

Deterministic relation between thermalphonon dressings and a non-Hermitian multi-Fano interferences router in iondoped microcrystals

The multi-Fano interference,which is obtained through the simultaneous acquisition of bright and dark states in different phase transitions of Eu3+:BiPO4(7:1,6:1,1:1,and 0.5:1)and Eu3+:NaYF4(1:1/4)crystals,were reported in this work.Multidressed spontaneous four-wave mixing and multidressed fluorescence(multiorder)were adopted to optimize the strong photon–phonon nested dressing effect,which results in more obvious multi-Fano interference.Firstly,the multi-Fano is produced through interference in continuous and multibound states.Secondly,five multi-Fano dips are originated from the nested five dressings(one photon and four phonons)under symmetrical splitting of 7F1 energy level.It is found that the pure H-phase(0.5:1)sample exhibits the strongest photon–phonon dressed effect(five Fano dips).Further,high-order non-Hermitian exceptional points in multi-Fano interference were investigated by adjusting the ratio of Rabi frequency to dephase rate through nested photon and phonon dressing.The experimental results are validated by theoretical simulations,which may be applied to designing optoelectronic devices such as non-Hermitian multi-Fano interferences(multichannel)router.

3D‑Printed Carbon‑Based Conformal Electromagnetic Interference Shielding Module for Integrated Electronics

Electromagnetic interference shielding(EMI SE)modules are the core com-ponent of modern electronics.However,the tra-ditional metal-based SE modules always take up indispensable three-dimensional space inside electronics,posing a major obstacle to the integra-tion of electronics.The innovation of integrating 3D-printed conformal shielding(c-SE)modules with packaging materials onto core electronics offers infinite possibilities to satisfy ideal SE func-tion without occupying additional space.Herein,the 3D printable carbon-based inks with various proportions of graphene and carbon nanotube nanoparticles are well-formulated by manipulating their rheological peculiarity.Accordingly,the free-constructed architectures with arbitrarily-customized structure and multifunctionality are created via 3D printing.In particular,the SE performance of 3D-printed frame is up to 61.4 dB,simultaneously accompanied with an ultralight architecture of 0.076 g cm^(-3) and a superhigh specific shielding of 802.4 dB cm3 g^(-1).Moreover,as a proof-of-concept,the 3D-printed c-SE module is in situ integrated into core electronics,successfully replacing the traditional metal-based module to afford multiple functions for electromagnetic compatibility and thermal dissipa-tion.Thus,this scientific innovation completely makes up the blank for assembling carbon-based c-SE modules and sheds a brilliant light on developing the next generation of high-performance shielding materials with arbitrarily-customized structure for integrated electronics.

Inter-layer interference for multi-layered tight gas reservoir in the absence and presence of movable water

Due to the dissimilarity among different producing layers,the influences of inter-layer interference on the production performance of a multi-layer gas reservoir are possible.However,systematic studies of inter-layer interference for tight gas reservoirs are really limited,especially for those reservoirs in the presence of water.In this work,five types of possible inter-layer interferences,including both absence and presence of water,are identified for commingled production of tight gas reservoirs.Subsequently,a series of reservoir-scale and pore-scale numerical simulations are conducted to quantify the degree of influence of each type of interference.Consistent field evidence from the Yan'an tight gas reservoir(Ordos Basin,China)is found to support the simulation results.Additionally,suggestions are proposed to mitigate the potential inter-layer interferences.The results indicate that,in the absence of water,commingled production is favorable in two situations:when there is a difference in physical properties and when there is a difference in the pressure system of each layer.For reservoirs with a multi-pressure system,the backflow phenomenon,which significantly influences the production performance,only occurs under extreme conditions(such as very low production rates or well shut-in periods).When water is introduced into the multi-layer system,inter-layer interference becomes nearly inevitable.Perforating both the gas-rich layer and water-rich layer for commingled production is not desirable,as it can trigger water invasion from the water-rich layer into the gas-rich layer.The gas-rich layer might also be interfered with by water from the neighboring unperforated water-rich layer,where the water might break the barrier(eg weak joint surface,cement in fractures)between the two layers and migrate into the gas-rich layer.Additionally,the gas-rich layer could possibly be interfered with by water that accumulates at the bottom of the wellbore due to gravitational differentiation during shut-in operations.

Layered Structural PBAT Composite Foams for Efficient Electromagnetic Interference Shielding

The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.

Cognitive interference decision method for air defense missile fuze based on reinforcement learning

To solve the problem of the low interference success rate of air defense missile radio fuzes due to the unified interference form of the traditional fuze interference system,an interference decision method based Q-learning algorithm is proposed.First,dividing the distance between the missile and the target into multiple states to increase the quantity of state spaces.Second,a multidimensional motion space is utilized,and the search range of which changes with the distance of the projectile,to select parameters and minimize the amount of ineffective interference parameters.The interference effect is determined by detecting whether the fuze signal disappears.Finally,a weighted reward function is used to determine the reward value based on the range state,output power,and parameter quantity information of the interference form.The effectiveness of the proposed method in selecting the range of motion space parameters and designing the discrimination degree of the reward function has been verified through offline experiments involving full-range missile rendezvous.The optimal interference form for each distance state has been obtained.Compared with the single-interference decision method,the proposed decision method can effectively improve the success rate of interference.