A Combined Homotopy Infeasible Interior-Point Method for Convex Nonlinear Programming

In this paper, on the basis of the logarithmic barrier function and KKT conditions, we propose a combined homotopy infeasible interior-point method （CHIIP） for convex nonlinear programming problems. For any convex nonlinear programming, without strict convexity for the logarithmic barrier function, we get different solutions of the convex programming in different cases by CHIIP method.

Element-free Galerkin method for free vibration of rectangular plates with interior elastic point supports and elastically restrained edges

The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.

Dynamic economic dispatch combining network flow and interior point method

Under the environment of electric power market, economic dispatch (ED) problem should consider network constraints, unit ramp rates, besides the basic constraints. For this problem, it is important to establish the effective model and algorithm. This paper examines the decoupled conditions that affect the solution optimality to this problem. It proposes an effective model and solution method. Based on the look-ahead technique, it finds the number of time intervals to guarantee the solution optimality. Next, an efficient technique for finding the optimal solution via the interior point methods is described. Test cases, which include dispatching six units over 5 time intervals on the IEEE 30 test system with line flows and ramp constraints are presented. Results indicate that the computational effort as measured by iteration counts or execution time varies only modestly with the problem size.

A New Infeasible Interior-point Method for Linear Complementarity Problem Based on Full Newton Step

This paper proposes an infeasible interior-point algorithm with full-Newton step for linear complementarity problem,which is an extension of Roos about linear optimization. The main iteration of the algorithm consists of a feasibility step and several centrality steps. At last,we prove that the algorithm has O(nlog n/ε) polynomial complexity,which coincides with the best known one for the infeasible interior-point algorithm at present.

Solving Fixed Point Problems in More General Nonconvex Sets Via an Interior Point Homotopy Method

In this paper,we are mainly devoted to solving fixed point problems in more general nonconvex sets via an interior point homotopy method.Under suitable conditions,a constructive proof is given to prove the existence of fixed points,which can lead to an implementable globally convergent algorithm.

Globally Convergent Interior Point Methods for Variational Inequalities in Unbounded Sets

The finite-dimensional variational inequality problem (VIP) has been studied extensively in the literature because of its successful applications in many fields such as economics, transportation, regional science and operations research. Barker and Pang[1] have given an excellent survey of theories, methods and applications of VIPs.

Optimal Adjustment Algorithm for <i>p</i>Coordinates and The Starting Point in Interior Point Methods

Optimal adjustment algorithm for p coordinates is a generalization of the optimal pair adjustment algorithm for linear programming, which in turn is based on von Neumann’s algorithm. Its main advantages are simplicity and quick progress in the early iterations. In this work, to accelerate the convergence of the interior point method, few iterations of this generalized algorithm are applied to the Mehrotra’s heuristic, which determines the starting point for the interior point method in the PCx software. Computational experiments in a set of linear programming problems have shown that this approach reduces the total number of iterations and the running time for many of them, including large-scale ones.

A NEW FRAMEWORK OF PRIMAL-DUAL INFEASIBLE INTERIOR-POINT METHOD FOR LINEAR PROGRAMMING

On the basis of the formulations of the logarithmic barrier function and the idea of following the path of minimizers for the logarithmic barrier family of problems the so called "centralpath" for linear programming, we propose a new framework of primal-dual infeasible interiorpoint method for linear programming problems. Without the strict convexity of the logarithmic barrier function, we get the following results: (a) if the homotopy parameterμcan not reach to zero,then the feasible set of these programming problems is empty; (b) if the strictly feasible set is nonempty and the solution set is bounded, then for any initial point x, we can obtain a solution of the problems by this method; (c) if the strictly feasible set is nonempty and the solution set is unbounded, then for any initial point x, we can obtain a (?)-solution; and(d) if the strictly feasible set is nonempty and the solution set is empty, then we can get the curve x(μ), which towards to the generalized solutions.

Power Generation Expansion Planning Using an Interior Point with Cutting Plane （IP/CP） Method

The generation expansion planning is one of complex mixed-integer optimization problems, which involves a large number of continuous or discrete decision variables and constraints. In this paper, an interior point with cutting plane （IP/CP） method is proposed to solve the mixed-integer optimization problem of the electrical power generation expansion planning. The IP/CP method could improve the overall efficiency of the solution and reduce the computational time. Proposed method is combined with the Bender＇s decomposition technique in order to decompose the generation expansion problem into a master investment problem and a slave operational problem. The numerical example is presented to compare with the effectiveness of the proposed algorithm.

Low-order Wavefront Error Compensation for Multi-field of Lithography Projection Objective Based on Interior Point Method

Low-order wavefront error account for a large proportion of wave aberrations.A compensation method for low order aberration of projection lithography objective based on Interior Point Method is presented.Compensation model between wavefront error and degree of movable lens freedom is established.Converting over-determined system to underdetermined system,the compensation is solved by Interior Point Method(IPM).The presented method is compared with direct solve the over-determined system.Then,other algorithm GA,EA and PS is compared with IPM.Simulation and experimental results show that the presented compensation method can obtained compensation with less residuals compared with direct solve the over-determined system.Also,the presented compensation method can reduce computation time and obtain results with less residuals compare with AGA,EA and PS.Moreover,after compensation,RMS of wavefront error of the experimental lithography projection objective decrease from 56.05 nm to 17.88 nm.

Interior-Point Methods Applied to the Predispatch Problem of a Hydroelectric System with Scheduled Line Manipulations

Transmission line manipulations in a power system are necessary for the execution of preventative or corrective main- tenance in a network, thus ensuring the stability of the system. In this study, primal-dual interior-point methods are used to minimize costs and losses in the generation and transmission of the predispatch active power flow in a hydroelectric system with previously scheduled line manipulations for preventative maintenance, over a period of twenty-four hours. The matrix structure of this problem and the modification that it imposes on the system is also broached in this study. From the computational standpoint, the effort required to solve a problem with or without line manipulations is similar, and the reasons for this are also discussed in this study. Computational results sustain our findings.

A NEWTON-TYPE GLOBALLY CONVERGENT INTERIOR-POINT METHOD TO SOLVE MULTI-OBJECTIVE OPTIMIZATION PROBLEMS

This paper proposes an interior-point technique for detecting the nondominated points of multi-objective optimization problems using the direction-based cone method.Cone method decomposes the multi-objective optimization problems into a set of single-objective optimization problems.For this set of problems,parametric perturbed KKT conditions are derived.Subsequently,an interior point technique is developed to solve the parametric perturbed KKT conditions.A differentiable merit function is also proposed whose stationary point satisfies the KKT conditions.Under some mild assumptions,the proposed algorithm is shown to be globally convergent.Numerical results of unconstrained and constrained multi-objective optimization test problems are presented.Also,three performance metrics(modified generational distance,hypervolume,inverted generational distance)are used on some test problems to investigate the efficiency of the proposed algorithm.We also compare the results of the proposed algorithm with the results of some other existing popular methods.

A new primal-dual interior-point algorithm for convex quadratic optimization

In this paper, a new primal-dual interior-point algorithm for convex quadratic optimization （CQO） based on a kernel function is presented. The proposed function has some properties that are easy for checking. These properties enable us to improve the polynomial complexity bound of a large-update interior-point method （IPM） to O（√n log nlog n/e）, which is the currently best known polynomial complexity bound for the algorithm with the large-update method. Numerical tests were conducted to investigate the behavior of the algorithm with different parameters p, q and θ, where p is the growth degree parameter, q is the barrier degree of the kernel function and θ is the barrier update parameter.

Penalized interior point approach for constrained nonlinear programming

A penalized interior point approach for constrained nonlinear programming is examined in this work. To overcome the difficulty of initialization for the interior point method, a problem equivalent to the primal problem via incorporating an auxiliary variable is constructed. A combined approach of logarithm barrier and quadratic penalty function is proposed to solve the problem. Based on Newton＇s method, the global convergence of interior point and line search algorithm is proven. Only a finite number of iterations is required to reach an approximate optimal solution. Numerical tests are given to show the effectiveness of the method.

An Improved Affine-Scaling Interior Point Algorithm for Linear Programming

In this paper, an Improved Affine-Scaling Interior Point Algorithm for Linear Programming has been proposed. Computational results of selected practical problems affirming the proposed algorithm have been provided. The proposed algorithm is accurate, faster and therefore reduces the number of iterations required to obtain an optimal solution of a given Linear Programming problem as compared to the already existing Affine-Scaling Interior Point Algorithm. The algorithm can be very useful for development of faster software packages for solving linear programming problems using the interior-point methods.

A class of polynomial primal-dual interior-point algorithms for semidefinite optimization

In the present paper we present a class of polynomial primal-dual interior-point algorithms for semidefmite optimization based on a kernel function. This kernel function is not a so-called self-regular function due to its growth term increasing linearly. Some new analysis tools were developed which can be used to deal with complexity ＂analysis of the algorithms which use analogous strategy in [5] to design the search directions for the Newton system. The complexity bounds for the algorithms with large- and small-update methodswere obtained, namely,O（qn^（p＋q/q（P＋1）log n/ε and O（q^2√n）log n/ε,respectlvely.

Primal-Dual Interior-Point Algorithms with Dynamic Step-Size Based on Kernel Functions for Linear Programming

In this paper, primal-dual interior-point algorithm with dynamic step size is implemented for linear programming （LP） problems. The algorithms are based on a few kernel functions, including both serf-regular functions and non-serf-regular ones. The dynamic step size is compared with fixed step size for the algorithms in inner iteration of Newton step. Numerical tests show that the algorithms with dynaraic step size are more efficient than those with fixed step size.

Complexity analysis of interior-point algorithm based on a new kernel function for semidefinite optimization

Interior-point methods （IPMs） for linear optimization （LO） and semidefinite optimization （SDO） have become a hot area in mathematical programming in the last decades. In this paper, a new kernel function with simple algebraic expression is proposed. Based on this kernel function, a primal-dual interior-point methods （IPMs） for semidefinite optimization （SDO） is designed. And the iteration complexity of the algorithm as O（n^3/4 log n/ε） with large-updates is established. The resulting bound is better than the classical kernel function, with its iteration complexity O（n log n/ε） in large-updates case.

A Continuation Method for Solving Fixed Point Problems in Unbounded Convex Sets

In this paper, an unbounded condition is presented, under which we are able to utilize the interior point homotopy method to solve the Brouwer fixed point problem on unbounded sets. Two numerical examples in R3 are presented to illustrate the results in this paper.