A Research for Regional Contribution Rate of Internal Source and External Source of PM_(2.5) Based on Set Pair Analysis Method

A problem of the air pollution control in China is getting to know a regional contribution rate of internal and external source of PM2.5. In this paper,Set Pair Analysis（ SPA） method is proposed to calculate the contribution rate of PM2.5in Dongguan City. Due to geographic,meteorological factors and the low concentration of air pollutants in Qingxi area,the PM2.5in this place is mainly contributed by the regional transport of air pollutants from other inside areas of Dongguan,and less affected by the outside of Dongguan. So the concentration of PM2.5in Qingxi area can reflect the Dongguan＇s basic background concentration of PM2.5. On the basis of the basic background concentration,firstly the concentration of each pollutant components is divided into the internal part and the mixed part. Secondly using the source apportionment samples of five monitoring sites in Dongguan we can respectively construct a sample set A and an evaluation set B. Thirdly the SPA is operated onto the mixed part in terms of set B.At last the connection degree between the concentration of each pollutant components and external source and internal source will be calculated,that is the contribution rate. The research reveals that the contribution rate of internal source and external source of PM2.5in Dongguan City is 83%and 17% respectively,which roughly met expectations. This method is simple and effective and it can provide a reference for the government taking reduction measures to control PM2.5pollutants emission.

Comparative Analysis of Rice Export Competitiveness in Heilongjiang Province of China Based on Index Method

Based on the analysis of rice planting and export development in Heilongjiang Province in 2013-2021,this paper comprehensively used three export competitiveness analysis methods,namely,trade competitiveness index,revealed comparative advantage(RCA)analysis and international market share analysis,to compare the four major rice exporters in the world and the three major rice export provinces and cities in China.Besides,it evaluated the rice export competitiveness of Heilongjiang Province from multiple perspectives.It analyzed the reasons for low competitiveness in terms of export product structure,export market structure,production and processing technology,and brand building.Finally,it is recommended to clarify the positioning of rice export quality and take more measures to ensure product quality;improve the level of industrialization of rice production and processing,and extend the rice industry chain;develop diversified rice export markets and improve export flexibility;adhere to the principle of"opening the door and going out",expand the international popularity of high-quality brands,so as to enhance the rice export competitiveness of Heilongjiang Province.

Middle or low water pressure direct spiral double helix converging nozzle structure optimization and flow field analysis

In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large size, complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots. On the basis of comprehensive typical spray noz- zles, a direct spiral double helix converging nozzle （DSDHCN） is proposed, which has the advanta- ges of small volume, light weight, simple structure, and convenient installation. To make the spray nozzle have good performance, and meet the requirements of more efficient fire extinguishing, a nu- merical study is carried out to analyze the internal and external full flow field of nozzle. A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software. The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory. Some simulations about middle or low water pressure direct spiral double he- lix converging optimized nozzle have been done in 30bar pressure. The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle, but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.

THEORETICAL ANALYSIS ON THE DEPTH OF NEEDLE-INSERTION

In the present paper, the author sums up and analyzes descriptions about needle-insertion depth in Chinese classical medical book Huang Di Nei Jing (《黄帝内经》The Yellow Emperor’s Internal Classic). In many chapters of Nei Jing, the needle-insertion depth is stressed to be various according to 1) the deficiency or excess of syndromes, 2) the patients’ constitution, 3) the severity of disease, 4) the duration of disease, 5) the location of disease, 6) the patient’s age, 7) the location of the needled acupoint, 8) the season, 9) the patient’s temperament, 10) the pulse condition, 11) the state of “Deqi”, and 12) the location of the running course of meridians. In addition, different kinds of diseases and different stages of diseases also need different depths of needle insertion, different manipulating skills and different stimulating quantity.

Applying Theoretical-Methodological Tools for the Implementation of ISO 9001： 2015 Clause 4 Context of the Organization

Nowadays, in order to satisfy the ISO 9001： 2015 requirements, organizations access to information from web sites, consultant guides, Internet forums, books, and courses, as a first approximation, however, the quality, reliability, validity, and accuracy of the information content in these is limited. The research topic of this study is the use of theoretical methodological tools, whose implementation supports the organizations in the fulfillment of requirement 4 of ISO 9001：2015, adapting it to their particular needs, minimizing rework in the documentation, increasing the motivation of the personnel involved and promoting well-being within the work environment. Some theoretical methodological tools were implemented in the case of Engineering laboratories of the Faculty of Higher Studies Arag6n, that support and complement the teaching-learning process in the theoretical-practical subjects of the curricula of the engineering bachelor＇s degrees, providing students with practical training in the use of equipment, devices, and tools, as well as extracurricular courses. In the study participated the stakeholders of laboratories. From the results, it was observed that the time for the documentation of the quality management system was reduced using the theoretical tools proposed in this study. In conclusion, this study will thus be useful as a starting point in using formal tools for the implementation of ISO 9001： 2015 standard.

Limit Analysis of Defect-Free Pipe Elbow Under Internal Pressure With Mean Yield Criterion

With mean yield（MY）criterion,an analytical solution of the collapse load for a defect-free pipe elbow under internal pressure is first obtained.It is a function of ratio of thickness to radius t0/r0,strain hardening exponent n,curvature influence factor mand ultimate tensile strength.The collapse load increases with the increase of m,and it is the same as the burst pressure of straight pipe if m=1is assumed.The MY-based solution is compared with those based on Tresca,Mises and twin shear stress（TSS）yield criteria,and the comparison indicates that Tresca and twin shear stress yield criteria predict a lower bound and an upper bound to the collapse load respectively.However,the MY-based solution lies just between the TSS and Tresca solutions,and almost has the same precision with the Mises solution.

A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification

A dynamic two-zone model is proposed to address the formation of granulation and drying zones in fluidized bed layering granulation processes with internal product classification. The model assumes a constant volume for the granulation zone, but a variable overall volume for the fluidized bed to account for classified product removal. The model is used to study the effect of various process parameters on dynamics and process stability. Stability is shown to depend on the separation diameter of product removal and the flow rate of the injected liquid. A lower and upper range of separation diameters with stable process behavior are found. In an intermediate range instability in the form of self-sustained oscillations is observed. The lower stability boundary is in qualitative agreement with recent experimental observations （Schmidt, Bück, ＆ Tsotsas, 2015）; the upper boundary was reported in a theoretical paper by Vreman, Van Lare, and Hounslow （2009） based on a single zone model.

A Wireframe Model-Based Method for Automated Internal Design

This paper proposes a wireframe model-based method for automated internal design. The method is used to extract geometric structure of an internal wireframe model and find out all loop structures of furniture models. The wireframe models are classified as the multiple independent sub-models according to the geometric structure by statistical analysis. The corresponding models are selected from a 3D model database to build an internal scene based on characteristic points of furniture wireframe models. In the experiments 3D database via manually selected 268 3D furniture models from Google 3D warehouse is built up. The experiments show that the method can construct 3D scenes in 1.1×103 ms. This method costs less time compared with traditional hierarchical method and depth-sensing camera method in the same experimental conditions. The method can be also used for 3D visualization either with complex backgrounds.

Structural form-finding of bending components in buildings by using parametric tools and principal stress lines

This paper aims to provide an efficient and straightforward structural form-finding method for designers to extrapolate component forms during the conceptual stage.The core idea is to optimize the classical method of structural form-finding based on principal stress lines by using parametric tools.The traditional operating process of this method relies excessively on the designer’s engineering experience and lacks precision.Meanwhile,the current optimization work for this method is overly complicated for architects,and limitations in component type and final result exist.Therefore,to facilitate an architect’s conceptual work,the optimization metrics of the method in this paper are set as simplicity,practicality,freedom,and rapid feedback.For that reason,this paper optimizes the method from three aspects:modeling strategy for continuum structures,classification processing of data by using the k-nearest neighbor algorithm,and topological form-finding process based on stress lines.Eventually,it allows architects to create structural texture with formal aesthetics and modify it in real time on the basis of structural analysis results.This paper also explores a comprehensive application strategy with internal force analysis diagramming to form-finding.The finite element analysis tool Karamba3D verifies the structural performance of the form-finding method.The performance is compared with that of the conventional form,and the comparison results show the practicality and potential of the strategy in this paper.