Finite Element Analysis of Internal Gear in High-Speed Planetary Gear Units

The stress and the elastic deflection of internal ring gear in high-speed spur planetary gear units are investigated. A rim thickness parameter is defined as the flexibility of internal ring gear. Six evenly spaced linear springs are used to describe the fitting status between internal ring gear and the gearcase. The finite element model of the whole internal ring gear is established by means of Pro/E and ANSYS. The loads on meshing teeth of internal ring gear are applied according to the contact ratio and the load-sharing coefficient. With the finite element analysis (FEA), the influences of flexibility and fitting status on the stress and elastic deflection of internal ring gear are predicted. The simulation reveals that the principal stress and deflection increase with the decrease of rim thickness of internal ring gear. Moreover, larger spring stiffness helps to reduce the stress and deflection of internal ring gear. Therefore, the flexibility of internal ring gear must be considered during the design of high-speed planetary gear transmissions.

Analysis of lubrication performance for internal meshing gear pair considering vibration

The thermal elasto-hydrodynamic lubrication characteristics of the internal meshing gears in a planetary gear train under vibrations were examined considering the influence of the modification coefficient and time-varying meshing stiffness.Based on dynamic theory of the gear system,a dynamic model of the planetary gear train was established.The lubrication performances of modified gear systems under vibrations and static loads were analyzed.Compared with other transmission types,the best lubrication effect could be produced by the positive transmission.A thicker lubricating oil film could be formed,and the friction coefficient and oil film flash temperature are the smallest.Increasing modification coefficient improves the lubrication performance continuously but intensifies the engage-in and tooth-change impact.For the planetary and inner gears,the increase in the modification coefficient also leads a decrease in the oil film stiffness.

Theoretical and experimental investigation on internal gear pair with small sliding ratio

Aiming at the issue of sliding ratio,an internal gear pair is proposed which consists of an involute internal gear and a pinion with quadratic curve teeth.Particularly,the contact pattern is point contact and the pinion is generated based on an involute gear.The generation method and mathematical models of the gear pair are presented.The sliding ratio is calculated and the general calculation formulas of sliding ratios are developed.Also,the comparison between the involute gear and proposed gear is made.The adaptability of center distance and contact stress are also discussed.In addition,the gear pair was manufactured and inspected according to the exactitude solid model of the gear pair.In order to confirm this model to be effective,the efficiency experiment and the contrast experiment with the involute gear pair were performed.Furthermore,these two types of pinions were analyzed by scanning electron microscope and wear depths were measured by measuring center.The experiment results show that the efficiency of the internal gear pair is stable at a range about 97.1%to 98.6%and wear depth is less than 50%of the involute gear pair.The internal gear pair is expected to have excellent transmission performance.

Dual cycloid gear mechanism for automobile safety pretensioners

The most conventional vehicle pretensioner system consists of an internal gear pair with involute teeth. However, it has been well known that the corresponding gear pairs are relatively weak under the situation of impact loadings. To improve this phenomenon, a new pretensioning gear system with cycloid teeth rather than the involute ones was proposed, and dual cycloidal gear mechanisms were designed for satisfying geometric constraints and dynamic loading conditions. The simulations of the prototypes were conducted by LS-DYNA program and the experiments for a prototype were performed for a dynamic model with impact loading devices. The results show that the better operation and the smoother motion are confirmed in the proposed cycloidal gear system rather than the conventional one without interferences between gear teeth under the impact of a crash.

Mesh stiffness evaluation of an internal spur gear pair with tooth profile shift

Tooth profile shift will change the thickness of gear teeth and a part of geometrical parameters of a gear pair, thus influencing its mesh stiffness and consequently the dynamic performances. In this paper, an analytical mesh stiffness calculation model for an internal gear pair in mesh considering the tooth profile shift is developed based on the potential energy principle. Geometrical representations of the tooth profile shift are firstly derived, and then fitted into the analytical tooth stiffness model of gears. This model could supply a convenient way for mesh stiffness calculation of profile shifted spur gears. Then, simulation studies are conducted based on the developed model to demonstrate the effects of tooth profile shift coefficient on the tooth compliances and the mesh stiffness of the internal spur gear pair. The results show that tooth profile shift has an obvious influence on the mean value, amplitude variation and phase of the mesh stiffness, from which it can be predicted that the dynamic response of an internal gear transmission system will be affected by the tooth profile shift.