Effect of external and internal cues on core muscle activation during the Sahrmann five-level core stability test

BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of core muscle activation and a person's ability to stabilize the lumbopelvic complex.Preparatory cues and images can be used to increase the activation of these muscles.To attain optimal movement patterns,it will be necessary to determine what cueing will give the most effective results for core stability.AIM To investigate the effects of external and internal cues on core muscle activation during the Sahrmann five-level core stability test.METHODS Total 68 participants(21.83±3.47 years)were randomly allocated to an external(n=35)or internal cue group(n=33).Participants performed the Sahrmann fivelevel core stability test without a cue as baseline and the five-level stability exercises with an internal or external cue.External cue group received a pressure biofeedback unit(PBU),and the internal cue group received an audio cue.A Delsys Trigno^(TM)surface electromyography unit was used for muscle activation from the rectus abdominis,external oblique,and transverse abdominis/internal oblique muscles.RESULTS Linear mixed effects model analysis showed that cueing had a significant effect on core muscle activation(P=0.001);however,there was no significant difference between cue types(internal or external)(P=0.130).CONCLUSION Both external and internal cueing have significant effects on core muscle activation during the Sahrmann five-level core stability test and the PBU does not create higher muscle activation than internal cueing.

Effect of internal iliac artery chemotherapy after transurethral resection of bladder tumor for muscle invasive bladder cancer

Objective： To evaluate the clinical effect of transurethral resection of bladder tumor（TUR-BT） combined with internal iliac artery chemotherapy and intravesical instillation therapy for muscle invasive bladder cancer（MIBC）.Methods： From February 2007 to April 2014, 62 patients with MIBC were treated with TUR-BT combined with intravesical instillation therapy, with or without internal iliac artery chemotherapy, and the chemotherapy regimen is gemcitabine and cisplatin（GC）. The bladder preservation and survival rate as well as cancer-specific survival（CSS） rate and overall survival（OS） rate of the two groups were compared.Results： Sixty-two patients were followed-up for 26-102 months with an average of 58.4±3.1 months. Recurrence-free survival（RFS） at 2-year for TUR ＋ GC group and TUR group were 77.8% and 53.8%, respectively. Bladder preserved rate（BPR） at 3-year for TUR ＋ GC group and TUR group were 94.4% and 80.8%. CSS rate at 2-year for TUR ＋ GC group and TUR group were 94.4% and 84.6%. The diseasefree survival（DFS） at 1-year for TUR ＋ GC group and TUR group were 83.3% and 61.5%, and 77.8% and 53.8% for the 2nd year. OS at 2-year for TUR ＋ GC group and TUR group were 88.9% and 92.3%.Conclusions： TUR-BT and intravesical instillation therapy combined with internal iliac artery chemotherapy for MIBC had a better outcome at RFS, BPR and DFS than the treatment without internal iliac artery chemotherapy, and no difference in OS and CSS.

Partial and Full Arc Volumetric Modulated Arc Therapy in Lung Cancer Stereotactic Body Radiotherapy with Different Definitions of Internal Target Volume Based on 4D CT

Purpose: To investigate the feasibility of partial arc volumetric modulated arc therapy (VMAT) in lung cancer stereotactic body radiotherapy (SBRT), as well the volumetric and dosimetric effects of different internal target volume (ITV) definitions with 4D CT. Methods: Fourteen patients with primary and metastatic lung cancer underwent SBRT were enrolled. Full and partial arc VMAT plans were generated with four different ITVs: ITVall, ITVMIP, ITVAIP and ITV2phases, representing ITVs generated from all 10 respiratory phases, maximum intensity projection (MIP), average intensity projection (AIP), and 2 extreme respiratory phases. Volumetric and dosimetric differences, as well as MU and delivery time were investigated. Results: Partial arc VMAT irradiated more dose at 2 cm away from planning target volume (PTV) (P = 0.002), however, it achieved better protection on mean lung dose , lung V5, spinal cord, heart and esophagus compared with full arc VMAT. The average MU and delivery time of partial arc VMAT were 240 and 1.6 min less than those of full arc VMAT. There were no significant differences on target coverage and organ at risks (OARs) sparing among four ITVs. The average percent volume differences of ITVMIP, ITVAIP and ITV2phases to ITVall were 8.6%, 13.4%, and 25.2%, respectively. Conclusions: Although partial arc VMAT delivered more dose 2 cm out of PTV, it decreases the dose to lung, spinal cord, and esophagus, as well decreased the total MU and delivery time compared with full arc VMAT without sacrificing target coverage. Partial arc VMAT was feasible and more efficient for lung SBRT.

Endoscopic polidocanol foam sclerobanding for the treatment of grade Ⅱ-Ⅲ internal hemorrhoids:A prospective,multi-center,randomized study

BACKGROUND Endoscopic rubber band ligation(ERBL)is a nonsurgical technique for the treatment of symptomatic internal hemorrhoids but is limited by recurrence and post-procedural pain.AIM To evaluate satisfaction,long-term recurrence,and post-procedural pain in managing internal hemorrhoids using a combination of polidocanol foam sclerotherapy and ERBL.METHODS This was a prospective,multicenter,randomized study.A total of 195 consecutive patients diagnosed with grade II-III internal hemorrhoids were enrolled from four tertiary hospitals and randomly divided into a cap-assisted endoscopic polidocanol foam sclerobanding(EFSB)or an ERBL group.All patients were followed-up for 12 months.Symptom-based severity and post-procedural pain were assessed using a hemorrhoid severity score(HSS)and a visual analog scale(VAS).Continuous variables were reported as medians and interquartile range.RESULTS One hundred and ninety-five patients were enrolled,with 98 in the EFSB group.HSS was lower in the EFSB group than in the ERBL group at 8 weeks[4.0(3.0-5.0)vs 5.0(4.0-6.0),P=0.003]and 12-month[2.0(1.0-3.0)vs 3.0(2.0-3.0),P<0.001]of follow-up.The prolapse recurrence rate was lower in the EFSB group at 12 months(11.2%vs 21.6%,P=0.038).Multiple linear regression analysis demonstrated that EFSB treatment[B=-0.915,95%confidence interval(CI):−1.301 to−0.530,P=0.001]and rubber band number(B=0.843,95%CI:0.595-1.092,P<0.001)were negatively and independently associated with the VAS score 24 hours post-procedure.The median VAS was lower in the EFSB group than in the ERBL[2.0(1.0-3.0)vs 3.0(2.0-4.0),P<0.001].CONCLUSION Cap-assisted EFSB provided long-term satisfaction and effective relief from the recurrence of prolapse and pain 24 hours post-procedure.

Mechanism of internal thermal runaway propagation in blade batteries

Blade batteries are extensively used in electric vehicles,but unavoidable thermal runaway is an inherent threat to their safe use.This study experimentally investigated the mechanism underlying thermal runaway propagation within a blade battery by using a nail to trigger thermal runaway and thermocouples to track its propagation inside a cell.The results showed that the internal thermal runaway could propagate for up to 272 s,which is comparable to that of a traditional battery module.The velocity of the thermal runaway propagation fluctuated between 1 and 8 mm s^(-1),depending on both the electrolyte content and high-temperature gas diffusion.In the early stages of thermal runaway,the electrolyte participated in the reaction,which intensified the thermal runaway and accelerated its propagation.As the battery temperature increased,the electrolyte evaporated,which attenuated the acceleration effect.Gas diffusion affected thermal runaway propagation through both heat transfer and mass transfer.The experimental results indicated that gas diffusion accelerated the velocity of thermal runaway propagation by 36.84%.We used a 1D mathematical model and confirmed that convective heat transfer induced by gas diffusion increased the velocity of thermal runaway propagation by 5.46%-17.06%.Finally,the temperature rate curve was analyzed,and a three-stage mechanism for internal thermal runaway propagation was proposed.In Stage I,convective heat transfer from electrolyte evaporation locally increased the temperature to 100℃.In Stage II,solid heat transfer locally increases the temperature to trigger thermal runaway.In StageⅢ,thermal runaway sharply increases the local temperature.The proposed mechanism sheds light on the internal thermal runaway propagation of blade batteries and offers valuable insights into safety considerations for future design.

Selective internal radiation therapy segmentectomy:A new minimally invasive curative option for primary liver malignancies?

Transarterial radioembolization or selective internal radiation therapy(SIRT)has emerged as a minimally invasive approach for the treatment of tumors.This percutaneous technique involves the local,intra-arterial delivery of radioactive microspheres directly into the tumor.Historically employed as a palliative measure for liver malignancies,SIRT has gained traction over the past decade as a potential curative option,mirroring the increasing role of radiation segmentectomy.The latest update of the BCLC hepatocellular carcinoma guidelines recognizes SIRT as an effective treatment modality comparable to other local ablative methods,particularly well-suited for patients where surgical resection or ablation is not feasible.Radiation segmentectomy is a more selective approach,aiming to deliver high-dose radiation to one to three specific hepatic segments,while minimizing damage to surrounding healthy tissue.Future research efforts in radiation segmentectomy should prioritize optimizing radiation dosimetry and refining the technique for super-selective administration of radiospheres within the designated hepatic segments.

Seeing beneath the surface:Harnessing point-of-care ultrasound for internal jugular vein evaluation

Point-of-care ultrasound(POCUS)of the internal jugular vein(IJV)offers a noninvasive means of estimating right atrial pressure(RAP),especially in cases where the inferior vena cava is inaccessible or unreliable due to conditions such as liver disease or abdominal surgery.While many clinicians are familiar with visually assessing jugular venous pressure through the internal jugular vein,this method lacks sensitivity.The utilization of POCUS significantly enhances the visualization of the vein,leading to a more accurate identification.It has been demonstrated that combining IJV POCUS with physical examination enhances the specificity of RAP estimation.This review aims to provide a comprehensive summary of the various sonographic techniques available for estimating RAP from the internal jugular vein,drawing upon existing data.

Relative Impacts of Sea Ice Loss and Atmospheric Internal Variability on the Winter Arctic to East Asian Surface Air Temperature Based on Large-Ensemble Simulations with NorESM2

To quantify the relative contributions of Arctic sea ice and unforced atmospheric internal variability to the “warm Arctic, cold East Asia”(WACE) teleconnection, this study analyses three sets of large-ensemble simulations carried out by the Norwegian Earth System Model with a coupled atmosphere–land surface model, forced by seasonal sea ice conditions from preindustrial, present-day, and future periods. Each ensemble member within the same set uses the same forcing but with small perturbations to the atmospheric initial state. Hence, the difference between the present-day(or future) ensemble mean and the preindustrial ensemble mean provides the ice-loss-induced response, while the difference of the individual members within the present-day(or future) set is the effect of atmospheric internal variability. Results indicate that both present-day and future sea ice loss can force a negative phase of the Arctic Oscillation with a WACE pattern in winter. The magnitude of ice-induced Arctic warming is over four(ten) times larger than the ice-induced East Asian cooling in the present-day(future) experiment;the latter having a magnitude that is about 30% of the observed cooling. Sea ice loss contributes about 60%(80%) to the Arctic winter warming in the present-day(future) experiment. Atmospheric internal variability can also induce a WACE pattern with comparable magnitudes between the Arctic and East Asia. Ice-lossinduced East Asian cooling can easily be masked by atmospheric internal variability effects because random atmospheric internal variability may induce a larger magnitude warming. The observed WACE pattern occurs as a result of both Arctic sea ice loss and atmospheric internal variability, with the former dominating Arctic warming and the latter dominating East Asian cooling.

Suppressed Internal Intrinsic Stress Engineering in High-Performance Ni-Rich Cathode Via Multi layered In Situ Coating Structure

LiNi_(x)Co_(y)Al_(z)O_(2)(NCA)cathode materials are drawing widespread attention,but the huge gap between the ideal and present cyclic stability still hinders their further commercial application,especially for the Ni-rich LiNi_(x)Co_(y)Al_(z)O_(2)(x>0.8,x+y+z=1)cathode material,which is owing to the structural degradation and particles'intrinsic fracture.To tackle the problems,Li_(0.5)La_(2)Al_(0.5)O_(4)in situ coated and Mn compensating doped multilayer LiNi_(0.82)Co_(0.14)Al_(0.04)O_(2)was prepared.XRD refinement indicates that La-Mn co-modifying could realize appropriate Li/Ni disorder degree.Calculated results and in situ XRD patterns reveal that the LLAO coating layer could effectively restrain crack in secondary particles benefited from the suppressed internal strain.AFM further improves as NCA-LM2 has superior mechanical property.The SEM,TEM,XPS tests indicate that the cycled cathode with LLAO-Mn modification displays a more complete morphology and less side reaction with electrolyte.DEMS was used to further investigate cathode-electrolyte interface which was reflected by gas evolution.NCA-LM2 releases less CO_(2)than NCA-P indexing on a more stable surface.The modified material presents outstanding capacity retention of 96.2%after 100 cycles in the voltage range of 3.0-4.4 V at 1C,13%higher than that of the pristine and 80.8%at 1 C after 300 cycles.This excellent electrochemical performance could be attributed to the fact that the high chemically stable coating layer of Li_(0.5)La_(2)Al_(0.5)O_(4)(LLAO)could enhance the interface and the Mn doping layer could suppress the influence of the lattice mismatch and distortion.We believe that it can be a useful strategy for the modification of Ni-rich cathode material and other advanced functional material.

Adaptive Optimal Discrete-Time Output-Feedback Using an Internal Model Principle and Adaptive Dynamic Programming

In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed method, termed as IMP-ADP, does not require complete state feedback-merely the measurement of input and output data. More specifically, based on the IMP, the output control problem can first be converted into a stabilization problem. We then design an observer to reproduce the full state of the system by measuring the inputs and outputs. Moreover, this technique includes both a policy iteration algorithm and a value iteration algorithm to determine the optimal feedback gain without using a dynamic system model. It is important that with this concept one does not need to solve the regulator equation. Finally, this control method was tested on an inverter system of grid-connected LCLs to demonstrate that the proposed method provides the desired performance in terms of both tracking and disturbance rejection.

Flow Regimes in Bubble Columns with and without Internals: A Review

Hydrodynamics characterization in terms offlow regime behavior is a crucial task to enhance the design of bubble column reactors and scaling up related methodologies.This review presents recent studies on the typicalflow regimes established in bubble columns.Some effort is also provided to introduce relevant definitions pertaining to thisfield,namely,that of“void fraction”and related(local,chordal,cross-sectional and volumetric)variants.Experimental studies involving different parameters that affect design and operating conditions are also discussed in detail.In the second part of the review,the attention is shifted to cases with internals of various types(perfo-rated plates,baffles,vibrating helical springs,mixers,and heat exchanger tubes)immersed in the bubble columns.It is shown that the presence of these elements has a limited influence on the global column hydrodynamics.However,they can make the homogeneousflow regime more stable in terms of transition gas velocity and transi-tion holdup value.The last section is used to highlight gaps which have not beenfilled yet and future directions of investigation.

Selective Internal Iliac Artery Oxaliplatin Infusion： Another Facultative Treatment to Unremitting Hematuria in Stage T4 Bladder Carcinoma

OBJECTIVE To observe and evaluate the value of utilizing selective internal iliac artery infusion and selective internal iliac artery embolization for the treatment of unremitting gross hematuria of stage T4 bladder carcinoma. METHODS Fifty-eight stage T4 bladder carcinoma patients were selected. The patients were grouped to the TAI group and the TAE group. The main symptom of hemorrhage was gross hematuria. None of the patients in our study could receive trunk embolization. The infusion plan was oxaliplatin （100 mg/m2） and epirubicin （EPI 50mg/m2）. Embolization was done with coils or strips of gelatin sponge. The duration of gross hematuria was observed. Routine urinalysis and routine blood examination were performed. EORTC QLQ-C30 was used to evaluate the quality of life before and after treatment. RESULTS Gross hematuria and hematuria by light microscope in all patients were reviewed. Resolution time of gross hematuria in the TAI group was 6.7 ± 1.8 days and that in the TAE group was 3.5 ± 0.7 days. The changes in routine urianlysis, routine blood examination and EORTC QLQ-C30 are shown in Figs.l-3. Gross hematuria disappeared in both groups within 7 days after treatment, but the time for the gross hematuria to resolve in the TAE group was much less than that in TAI group （t = 2.51, P 〈 0.01）, and there were no significant differences in the 7th and 21st day between the 2 groups. On the 90th day, the number of erythrocytes in the urine was near 30, close to gross hematuria. The EORTC QLQ-C30 scores decreased after interventional therapy in both groups, which means that quality of life was increased, but there were no significant differences between the 2 groups. CONCLUSION Selective internal iliac artery infusion and selective internal iliac artery embolization are safe, and, in our study, therapeutic efficacy was satisfactory in treating unremitting gross hematuria of stage T4 bladder carcinoma in patients who could not receive trunk embolization. TAE can stop gross hematuria in the short term, but it can be used just once and the long-term therapeutic effect is not satisfactory. TAI had a therapeutic effect similar to TAE, but for a shorter duration, and TAI can be performed multiple times. TAI is one of the facultative treatments for treating gross hematuria of stage T4 bladder carcinoma.

INTERNAL RADIOTHERAPY OF LIVER CANCER USING^(131)ILIPIODOL

Internal radiotherapy with hepatic artery injection(HAI)and B-ultrasound guidedpuncture injection(BGPI)of 131I-lipiodol was observed in 20 patients with liver cancer.The radinuclide images showed that 131I-lipiodol accumulated in tumor mainly.The radioactivity of tumor/liverratio(T/L)in HAI and BGPI was 3.87±2.77 and 9.15±3.41 resistively. The effective half-lifeof,131I-lipiodol in tumor was(4.5±1.92)anys and(6.22±0.61) days. The radioactivity of lung was(13.19±3.01)% and(5.19±2.28)% espectively.These results suggest that the 131I-lipiodol biodistribution in BGPI is better than that in HAI.Clinical results showed that ABP levels dropped rapidlyin 64.3% of patients with peltive AFP.A shrinkage in tumor size was observed in 66.7% of patients.Besides transient fever,elevated bilirubin and SGPT,no any toxicity and adverse reaction wasobserved.

Fast Transmission Photothermal Radiometry via Sampling by an Internal Computer Sound Card

During the last few decades, photothermal radiometry（PTR） has been greatly developed and widely applied in the field of nondestructive testing. However, the traditional PTR system employs an expensive lock-in amplifier to detect the weak photothermal signal, which leads to high cost and long test time. In this paper, a fast transmission PTR system based on sampling by using an internal computer sound card was developed to lower the system cost and shorter the test time. A piece of amorphous silicon（a：Si） thin film solar cells with artificial defects was prepared and tested by the system. The results show that the sharpened defects can be identified easily and quickly according to the significant peaks of the original infrared signal sampled by the internal computer sound card. Furthermore, more detailed defects can be investigated by processing the infrared signal. These validate the effectiveness of the proposed transmission PTR system as a low cost and efficient non-destructive test technique.

Evaluation of Practice of Prescription of the Corticotherapy in the Department of Internal Medicine of the University Hospital of Point G from 2009 to 2013

Introduction: It is estimated that about 0.2% to 0.5% of French populations received a long-term systemic corticosteroid therapy. In Mali, from March, 2007 to February, 2008, in National Center for Disease Control and Prevention, 19.2% of hospitalized patients (24/125) received long-term corticosteroid therapy. Until now, the department of internal medicine of the university hospital of Point G hasn’t done any research on the corticosteroid therapy specially. Therefore, we initiated this work to evaluate our practice of prescription of corticosteroid. The target of the study was to evaluate practical activity of prescription of corticosteroid of internal medicine. Methods: Based on all hospitalized patient materials of the department of internal medicine of Point G regional university central hospital during January 2009-December 2013, we initiated this retrospective and descriptive study. This study was based on all hospitalized patients receiving corticosteroid in the time of researching, without distinguishing their sex or age. Results: During the period of study, the department of internal medicine of point G regional central hospital had received 2155 patients;64 were eligible: prevalence of 2.97%. Most patients were female, accounting for 87.5% with a sex-ratio of 0.14. The average age of our patients was 39.11 ± 16.92 years, ranging from 14 to 97 years. Physicians enrolled in the study Specialized Diploma (DES) and Internal represented 79.7% of prescribers. As pretreatment assessment, only 2 patients (3.12%) had carried out all of the standard balance (NFS, electrolytes, calcium, blood glucose and serum protein). The most common glucocorticoide was prednisone. Solid tumors represented 31.25% (20 cases) of the diseases treated, followed by systemic lupus erythematosus with 15.62% (10 cases). In addition, there are two cases of adrenals insufficiency (3.1%). In Point G internal medicine, pre-therapy evaluation and methods about corticosteroids therapy were insufficient and different.

Study on the Load Characteristics of Submerged Body Under Internal Solitary Waves on the Continental Shelf and Slope

Based on the high-quality observation data and the numerical simulation,the evolution characteristics of internal solitary waves(ISWs)and the load on the suspend submerged body are studied on the continental shelf and slope separately.The observed ISWs exhibit the first mode depression ISWs.The amplitudes of ISWs on the shelf and slope areas reach 50 m and 80 m,respectively.The upper layer velocity in the westward direction is about 0.8 m/s on the continental shelf and 0.9 m/s on the continental slope during the passing through of ISWs.The lower layer is dominated by the eastward compensating flow.In the vertical direction,the water in front of the wave flows downward,while the water behind the wave flows upward,and the maximum vertical velocity exceeds 0.2 m/s.Numerical simulation results show that the larger the amplitude of ISWs,the larger the load on the submerged body.The force on the submerged body by ISWs is dominated by the vertical force,and the corresponding maximum vertical forces on the continental shelf and slope are−25 kN and −27 kN.The submerged body is subjected to a large counterclockwise moment and the sudden change of the moment will also cause the submerged body to capsize.This paper not only gives a deeper understanding of the characteristics of ISWs from the deep continental slope to the shallow continental shelf,but also has a certain guiding value for the prediction of ISWs and for marine military activities.

Effect of internal structure of a batch-processing wet-etch reactor on fluid flow and heat transfer

Batch-processing wet-etch reactors are the key equipment widely used in chip fabrication,and their performance is largely affected by the internal structure.This work develops a three-dimensional computational fluid dynamics(CFD)model considering heat generation of wet-etching reactions to investigate the fluid flow and heat transfer in the wet-etch reactor.The backflow is observed below and above the wafer region,as the flow resistance in this region is high.The temperature on the upper part of a wafer is higher due to the accumulation of reaction heat,and the average temperature of the side wafer is highest as its convective heat transfer is weakest.Narrowing the gap between wafer and reactor wall can force the etchant to flow in the wafer region and then facilitate the convective heat transfer,leading to better within-wafer and wafer-to-wafer etch uniformities.An inlet angle of 60°balances fluid by-pass and mechanical energy loss,and it yields the best temperature and etch uniformities.The batch with 25wafers has much wider flow channels and much lower flow resistance compared with that with 50wafers,and thus it shows better temperature and etch uniformities.These results and the CFD model should serve to guide the optimal design of batch-processing wet-etch reactors.

Data-driven modeling on anisotropic mechanical behavior of brain tissue with internal pressure

Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.

Experimental Study on the Variation of Optical Imaging Characteristics with Zenith Angle due to Internal Solitary Waves in Sunglint

Internal solitary waves(ISWs)change the roughness of the sea surface,thus producing dark and bright bands in optical images.However,reasons for changes in imaging characteristics with the solar zenith angle remain unclear.In this paper,the optical imaging pattern of ISWs in sunglint under different zenith angles of the light source is investigated by collecting optical images of ISWs through physical simulation.The experiment involves setting 10 zenith angles of the light source,which are divided into area a the optical images of ISWs in the three areas show dark-bright mode,single bright band,and bright-dark mode,which are consistent with those observed by optical remote sensing.In addition,this study analyzed the percentage of the dark and bright areas of the bands and the change in the relative gray difference and found changes in both areas under different zenith angles of the light source.The MODIS and ASAR images display a similar brightness-darkness distance of the same ISWs.Therefore,the relationship between the brightness-darkness distance and the characteristic half-width of ISWs is determined in accordance with the eKdV theory and the imaging mechanism of ISWs of the SAR image.Overall,the relationship between them in the experiment is almost consistent with the theoretical result.

Loads and Dynamic Response Characteristic on FPSO Under Internal Solitary Waves

According to the established prediction model of internal solitary wave loads on FPSO in the previous work,the lumped mass model and the movement equations of finite displacement in time domain,the dynamic response model of interaction between internal solitary waves and FPSO with mooring lines were established.Through calculations and analysis,time histories of dynamic loads of FPSO exerted by internal solitary waves,FPSO’s motion and dynamic tension of mooring line were obtained.The effects of the horizontal pretension of mooring line,the amplitude of internal solitary wave and layer fluid depth on dynamic response behavior of FPSO were mastered.It was shown that the internal solitary waves had significant influence on FPSO,such as the large magnitude horizontal drift and a sudden tension increment.With internal solitary wave of −170 m amplitude in the ocean with upper and lower layer fluid depth ratio being 60:550,the dynamic loads reached 991.132 kN(horizontal force),18067.3 kN(vertical force)and−5042.92 kN·m(pitching moment).Maximum of FPSO’s horizontal drift was 117.56 m.Tension increment of upstream mooring line approached 401.48 kN and that of backflow mooring line was−140 kN.Moreover,the loads remained nearly constant with different pretension but increased obviously with the changing amplitude and layer fluid depth ratio.Tension increments of mooring lines also changed little with the pretension but increased rapidly when amplitude and layer fluid depth ratio increased.However,FPSO’s motion increased quickly with not only the horizontal pretension but also the amplitude of internal solitary wave and layer fluid depth ratio.