Determination of egg and milk allergen in food products by liquid chromatography-tandem mass spectrometry based on signature peptides and isotope-labeled internal standard

The aim of this work was to develop a liquid chromatography-tandem mass spectrometry method for the determination of milk allergen and egg allergen in food products.Signature peptides GGLEPINFQTAADQAR,VGINYWLAHK,VLVLDTDYK,FFVAPFPEVFGK,and NAVPITPTLNR were confirmed and synthesized as the quantitative peptide of ovalbumin,α-lactalbumin,β-lactoglobulin,α_(S1)-casein andα_(S2)-casein,the relative isotope-labeled internal standards were used in the quantitative analysis.Linear range was in the range of0.5-5000.0 nmol/L for egg and milk allergen in bread,cake,cookie,rice crust and wheat flour samples with free from egg and milk,the limits of detection of milk allergens and egg allergen were in the range between0.94 mg/100 g and 56.71 mg/100 g,limits of quantification of milk allergens and egg allergen were in the range between 2.36 mg/100 g and 141.78 mg/100 g.The recoveries ranged from 76.7%to 122.8%,the relative standard deviations were in the range of 1.60%-15.60%.The developed method has been successfully used for the detection of egg and milk allergen in various food samples.

Improved Measurement Performance of Inorganic Elements in Coal by Laser-Induced Breakdown Spectroscopy Coupled with Internal Standardization

Laser-induced breakdown spectroscopy was employed to determine the inorganic elements in coal. To improve the measurement＇s accuracy and precision, a new internal standardization scheme, which we named changed internal standardization, was compared with the traditional internal standardization and no internal standardization for the analysis of inorganic elements. The new internal standardization scheme used the atomic line of carbon at 247.86 nm and the molecular band of CN at 388.34 nm and C2 at 516.32 nm to normalize the lines of inorganic elements that were distributed in the same spectral channel. The performance of the utilization of the new internal standardization scheme was evaluated using a set of coal samples, including twenty calibration samples and five validation samples. The results show that the coefficients of determination R2 and the slope of calibration models coupled with changed internal standard- ization are better than that of the calibration models coupled with fixed internal standardization and no internal standardization. Moreover, the measurement accuracy and reproducibility of changed internal standardization for the analysis of five validation samples also yielded further improvement. The results that we obtained suggest that changed internal standardization could compensate for the matrix effects, as well as the influence of the difference in the spectral response of the light collection system.

Quantitative Determination of Tetrachlorantraniliprole by(1)^H NMR Spectroscopy with Internal Standard Method

[Objective]This study was to establish a rapid,specific and simple method for quantitative determination of tetrachlorantraniliprole by 1H NMR.[Method]1H NMR spectroscopy was acquired with deuterium DMSO as the solvent and maleic acid as internal standard under the conditions of temperature 25℃,pulses width 8.0μs,delay time 5 s,and scanning times 8.[Result]The hydrogen proton peaks of tetrachlorantraniliprole(δ=10.55)and maleic acid(δ=6.27)were taken as quantitative peaks.The peak area ratio y(As/Ar)and mass ratio x(ms/mr)were linearly regressed,and the correlation coefficient was 0.9999.The RSD value of repeatability test was 0.38%,and the RSD value of stability test was 0.77%.The content of tetrachlorantraniliprole was determined as 99.6%.[Conclusion]1H NMR spectroscopy can be used for quantitative determination of tetrachlorantraniliprole without standard reference,which is rapid,accurate and simple.

Quantitative Analysis of Fe Content in Iron Ore via External Calibration in Conjunction with Internal Standardization Method Coupled with LIBS

The external calibration in conjunction with internal standardization（ECIS） coupled with laser-induced breakdown spectroscopic（LIBS） technique was proposed to perform the quantitative analysis of Fe content in iron ore The plasma temperature and the electron number density were calculated to prove that the plasma was under local thermodynamic equilibrium（LTE） conditions and to ensure that the integral intensities of Fe I lines were reasonable. In addition, the result of the quantitative analysis shows a content of （20.26±0.59）% by mass of Fe in the iron ore. It was determined by four calibration curves, drawn for four emission lines of Fe I（373.48, 373.71,404.58 and 438.35 nm） normalized by Mn I line, base on the ECIS method which can eliminate the influence of matrix effect and improve the accuracy of quantitative analysis, compared with the standard addition method. Both the results of these two analytical methods were compared with that listed in the Standard Substance Certificate. The percentage content of Fe in the same sample of iron ore by the ECIS method was （20.17±0.08）% by mass, which shows a good performance to analyze the Fe content of iron ore in combination with LIBS.

Stable and unique graphitic Raman internal standard nanocapsules for surface-enhanced Raman spectroscopy quantitative analysis

Graphitic nanomaterials have unique, strong, and stable Raman vibrations that have been widely applied in chemistry and biomedicine. However, utilizing them as internal standards （ISs） to improve the accuracy of surface-enhanced Raman spectroscopy （SERS） analysis has not been attempted. Herein, we report the design of a unique IS nanostructure consisting of a large number of gold nanoparticles （AuNPs） decorated on multilayered graphitic magnetic nanocapsules （AGNs） to quantify the analyte and eliminate the problems associated with traditional ISs. The AGNs demonstrated a unique Raman band from the graphitic component, which was localized in the Raman silent region of the biomolecules, making them an ideal IS for quantitative Raman analysis without any background interference. The IS signal from the AGNs also indicated superior stability, even under harsh conditions. With the enhancement of the decorated AuNPs, the AGN nanostructures greatly improved the quantitative accuracy of SERS, in particular the exclusion of quantitative errors resulting from collection loss and non-uniform distribution of the analytes. The AGNs were further utilized for cell staining and Raman imaging, and they showed great promise for applications in biomedicine.

Application of internal standard method in recombinant luminescent bacteria test

Mercury and its organic compounds have been of severe concern worldwide due to their damage to the ecosystem and human health. The development of effective and affordable technology to monitor and signal the presence of bioavailable mercury is an urgent need.The Mer gene is a mercury-responsive resistant gene, and a mercury-sensing recombinant luminescent bacterium using the Mer gene was constructed in this study. The mer operon from marine Pseudomonas putida strain SP1 was amplified and fused with prompterless lux CDABE in the p UCD615 plasmid within Escherichia coli cells, resulting in p THE30–E. coli.The recombinant strain showed high sensitivity and specificity. The detection limit of Hg^2＋was 5 nmol/L, and distinct luminescence could be detected in 30 min. Cd^2＋, Cu^2＋, Zn^2＋, Ca^2＋,Pb^2＋, Mg^2＋, Mn^2＋, and Al^3＋did not interfere with the detection over a range of 10-5–1 m M.Application of recombinant luminescent bacteria testing in environmental samples has been a controversial issue： especially for metal-sensing recombinant strains, false negatives caused by high cytotoxicity are one of the most important issues when applying recombinant luminescent bacteria in biomonitoring of heavy metals. In this study, by establishing an internal standard approach, the false negative problem was overcome;furthermore, the method can also help to estimate the suspected mercury concentration,which ensures high detection sensitivity of bioavailable Hg2＋.

International Standardization of Blockchain and Distributed Ledger Technology:Overlaps,Gaps and Challenges

As one of the most concerned digital technologies in recent years,blockchain and distributed ledger technology are an important driving force for a new round of technological development.It is currently in the process of accelerating its evolution and maturity,and has gradually integrated with other digital technologies.It has been applied in many industries,providing decentralized solutions for various industries,realizing innovative storage models,and building a new trust system.As blockchain technology is officially incorporated into China’s new information infrastructure category,the application fields of blockchain have expanded rapidly,gradually extending from the financial field and government affairs to other fields in the real economy.At the same time,with the continuous development of the globalized economy,blockchain technology will also have a profound impact on international technological and economic development.Therefore,for the healthy and orderly development and real implementation of the blockchain industry,standardize the application of blockchain,effectively break through the cognitive and technical barriers between different countries,industries and systems on a global scale,prevent application risks,the development of the global blockchain industry needs standardization basis,which is particularly important and urgent.A sound standard system is an important key to the successful development of technology,and formulating the right standard at the right time for technology development helps ensure the ease of use and interoperability of the technology.From the perspective of international standardization,this article first introduces the general situation of ISO,ITU-T,IEEE,W3C and other international standardization organizations,and sorts out the status quo of the blockchain standardization working groups of mainstream international standardization organizations.All blockchain-related standards under development have been analyzed for the characteristics of international blockchain technology standards and industry application standards.Through data analysis,the overlaps,differences and conflicts in the field of international blockchain standard formulation are sorted out,and suggestions for blockchain standardization work in the application and development of blockchain technology standardization by international organizations and industries are put forward.The plans and layouts of future international standards are summarized to help the development of the international standardization of blockchain.

Characteristics of laser-induced breakdown spectroscopy of liquid slag

Rapid online analysis of liquid slag is essential for optimizing the quality and energy efficiency of steel production. To investigate the key factors that affect the online measurement of refined slag using laser-induced breakdown spectroscopy(LIBS), this study examined the effects of slag composition and temperature on the intensity and stability of the LIBS spectra. The experimental temperature was controlled at three levels: 1350℃, 1400℃, and 1450℃. The results showed that slag composition and temperature significantly affected the intensity and stability of the LIBS spectra. Increasing the Fe content and temperature in the slag reduces its viscosity, resulting in an enhanced intensity and stability of the LIBS spectra. Additionally, 42 refined slag samples were quantitatively analyzed for Fe, Si, Ca, Mg, Al, and Mn at 1350℃, 1400℃, and 1450℃.The normalized full spectrum combined with partial least squares(PLS) quantification modeling was used, using the Ca Ⅱ 317.91 nm spectral line as an internal standard. The results show that using the internal standard normalization method can significantly reduce the influence of spectral fluctuations. Meanwhile, a temperature of 1450℃ has been found to yield superior results compared to both 1350℃ and 1400℃, and it is advantageous to conduct a quantitative analysis of the slag when it is in a “water-like” state with low viscosity.

Comparison of seismic actions and structural design requirements in Chinese Code GB 50011 and International Standard ISO 3010

This papcr presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010:2001(E),emphasizing the similarities and differences related to design requirements,seismic actions and analytical approaches.Similarities include:earthquake return period,conceptual design,site classification,structural strength and ductility requirements,deformation limits,response spectra,seismic analysis procedures,isolation and energy dissipation, and nonstructural elements.Differences exist in the following areas:seismic levels,earthquake loading,mode damping factors and structural control.

Ophthalmology residency training in Jordan:an evaluation of quality and comparison with international standards

AIMTo evaluate Jordanian ophthalmology residency programs in achieving competencies outlined by the International Council of Ophthalmology (ICO) and residents' satisfaction with available training programs in Jordan, and to highlight weakness points that may be improved and strengthened.

A Review of White Granulated Sugar Standard Development in China and Comparative Study on the Chinese White Granulated Sugar Standard with International Standard

The sugar standard implemented under specific historical conditions had played a positive role in standardizing the production of China's sugar industry,promoting the development of sugar industry and strengthening the quality management of sugar products.This paper systematically combs the development of national standard and industrial standard of white granulated sugar,and analyzes the technical requirements such as sensory indicators,physical and chemical indicators and health indicators.From the development of China's white granulated sugar product standard,the sucrose content of the same level of white granulated sugar has not been adjusted,while the standard for indexes other than sucrose content,have been improved to meet the needs of the development of China's sugar industry and the development of domestic and foreign trade.Through comparison with the international standard of white granulated sugar,it is concluded that China’s national standard of white granulated sugar has kept pace with international standard.

Claim reserving for insurance contracts in line with the International Financial Reporting Standards 17:a new paid‑incurred chain approach to risk adjustments

This study considers the risk management of insurance policies in line with the implementation of the new International Financial Reporting Standards 17.It applies the paid-incurred chain method to model the future unpaid losses by combining the information channels of both the incurred claims and paid losses.We propose the recovery of the empirical distribution of the outstanding claims liabilities associated with a group of contracts via moment-based density approximation.We determine the risk measures and adjustments that are compliant with the new standard using the Monte–Carlo simulation method and approximated distributions.The historical data on the aggregate Ontario automobile insurance claims over a 15-year period are analyzed to examine the appropriateness and accuracy of our approach.

Application of International Standards in the Design of Monoblock Contrete Sleepers for Argentinian Railways

It is presented a State of the Art of international standards in the field of monoblock concrete sleepers design and calculation.Taking into account the fact that the Argentinian broad track gauge(1,676 mm)is different to international track gauge(1,435 mm)that is worldwide used,a comparative analysis is developed in order to evaluate the performance of internationals standards in the design of the sleepers used in Argentinian railways.Recommendations for future research are provided.

China and IEC international standardization activities

International Electrotechnical Commission (IEC), one of the currently worlswide largest and most authoritative international standardization organizations,is specialized in developing and promulgating international standards for the electric and electronic fields, which are widespread adopted through out the world and play an important role in the international trade of electric and electronic products. Moreover, according to the 2005 statistics by the World Bank, the population of countries participating in the IEC activities accounts for 92% of the world total and their trade volume accounts for 95% of the global total. ……

Review and Outlook of China Electronic and IT Industry Footprints in IEC International Standardization Activities

Year 2006 is the year marking the 100th anniversary of the founding of International Electrotechnical Commission (IEC). IEC is mainly engaged in the international standardization for electrical and electronic technology field aiming at promoting international trade and technology cooperation and exchange, improving product and service quality, upgrading productivity and protecting the environment as well as human health and safety. Most countries worldwide adopt standards developed and promulgated by IEC, providing a platform to international trade and technical exchange. China has being a member since 1957. Electronic and IT are the most developed and energetic filed in recent decades. Number of IEC TC/SC specialized in electronic and IT amounts up to 52.……

First ISO International Standard on Chinese Materia Medica

ISO 18662-1:2017,Traditional Chinese medicine--Vocabulary--Part 1:Chinese Materia Medica(CMM)was officially released recently.The standard is the first terminology standard published by ISO/TC 249,Traditional Chinese medicine,which provides an important basis to standardize and uniform the terminology of traditional Chinese medicine in the

The Achievements of Participating International Standardization Activities Made by Chinese Electrotechnical Industry

Chinese electrotechnical industry includes power generation equipment, power transmission and distribution equipment, multi-purpose equipment, and basic electrical material. The industry has 46 national technical committees (TC) and sub-committees (SC), which mirrors to 70 TCs and SCs of International Electrotechnical Commission (IEC). During the past five years, leaded by Standardization Administration of China (SAC),China Electrical Equipment Industry Association (CEEIA) obtained many great achievements in promoting participation of international standardization activities by improving unified management and concentrating industrial strength:……

Standardizing the International Bidding System for Chinese Machinery and Electric Products

Inthemid-1980s,ChinaintroducedtheinternationalhiddinqgvstAnimportingitsmachineryandelectricalproducts.TOday,ithasatotalof39institutionsresponsiblefortheirtenderingbusiness.Callingfortenderscanbeenmistedtoanysuchinstitutionbyanenterprise.Thesourcesoff...