An improved local radial point interpolation method for transient heat conduction analysis

The smoothing thin plate spline （STPS） interpolation using the penalty function method according to the optimization theory is presented to deal with transient heat conduction problems. The smooth conditions of the shape functions and derivatives can be satisfied so that the distortions hardly occur. Local weak forms are developed using the weighted residual method locally from the partial differential equations of the transient heat conduction. Here the Heaviside step function is used as the test function in each sub-domain to avoid the need for a domain integral. Essential boundary conditions can be implemented like the finite element method （FEM） as the shape functions possess the Kronecker delta property. The traditional two-point difference method is selected for the time discretization scheme. Three selected numerical examples are presented in this paper to demonstrate the availability and accuracy of the present approach comparing with the traditional thin plate spline （TPS） radial basis functions.

Coupled GIMP and CPDI material point method in modelling blast-induced three-dimensional rock fracture

Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challenging task.Some inherent weaknesses can be overcome by coupling the generalized interpolation material point(GIMP)and the convected particle domain interpolation technique(CPDI).For the media in the borehole,unchanged GIMP-type particles are used to guarantee a homogenous blast pressure.CPDITetrahedron type particles are employed to avoid the fake numerical fracture near the borehole for the rock material.A blasting experiment using three-dimensional single-borehole rock was simulated to examine the applicability of the coupled model under realistic loading and boundary conditions.A good agreement was achieved between the simulation and experimental results.Moreover,the mechanism of three-dimensional rock fracture was analyzed.It was concluded that rock particle size and material parameters play an important role in rock damage.The reflected tensile waves cause severe damage in the lower part of the model.Rayleigh waves occur on the top face of the rock model to induce a hoop failure band.

An interpolating reproducing kernel particle method for two-dimensional scatter points

An interpolating reproducing kernel particle method for two-dimensional （2D） scatter points is introduced. It elim- inates the dependency of gridding in numerical calculations. The interpolating shape function in the interpolating repro- ducing kernel particle method satisfies the property of the Kronecker delta function. This method offers a mathematics basis for recognition technology and simulation analysis, which can be expressed as simultaneous differential equations in science or project problems. Mathematical examples are given to show the validity of the interpolating reproducing kernel particle method.

Three-dimensional magnetotelluric forward modeling using structural-point EFGM and FEM coupling method

In this paper,the authors propose a method of three-dimensional(3D)magnetotelluric(MT)forward modeling algorithm based on the meshfree and finite element coupling method.The model is discretized by regular nodes in the central area,and the radial point interpolation method(RPIM)based on the global weakness is utilized to construct the meshfree shape function.The Governing equations in each background gird are solved by Gaussian integration.In the extended area where the points are sparsely distributed,to avoid the instability of the meshfree method,finite element method(FEM)with regular grids is used to solve the governing equation.Finally,the meshfree and finite element governing equations are coupled by the continuity of the field at the interfaces,and the direct solution technique is used to realize the 3D MT forward modeling.Numerical experiments of several typical electrical models are used to verify the effectiveness of the method.

On Two Birkhoff-Type Interpolations with First- and Second-Order Derivative

In this paper, we consider two interpolations of Birkhoff-type with integer-order derivative. The Birkhoff interpolation is related with collocation method for the corresponding initial or boundary value problems of differential equations. The solvability of the interpolation problems is proved. For Gauss-type interpolating points, error of interpolation approximation is deduced. Also, we give efficient algorithms to implement the concerned interpolations.

Java Language for Numerical Control Simulation System Research

Java language is widely used in a variety of development platforms to develop all kinds of application software for its simple and efficient.The programming language owning platform independent is adopted to solve the image flicker,sound loading and other issues by the threading technology,multimedia technology,graphics and point by point comparison techniques.Dynamic real⁃time process simulation is implemented and a two⁃dimensional network of CNC machining simulation system is developed while Java applet application is as a carrier.The simulation results show that the system has a friendly interface and fast calculation speed,and platform portability has a certain practicality and application value.

ELASTIC DYNAMIC ANALYSIS OF MODERATELY THICK PLATE USING MESHLESS LRPIM

A meshless local radial point interpolation method （LRPIM） for solving elastic dy-namic problems of moderately thick plates is presented in this paper. The discretized system equation of the plate is obtained using a locally weighted residual method. It uses a radial basis function （RBF） coupled with a polynomial basis function as a trial function,and uses the quartic spline function as a test function of the weighted residual method. The shape function has the properties of the Kronecker delta function,and no additional treatment is done to impose essen-tial boundary conditions. The Newmark method for solving the dynamic problem is adopted in computation. Effects of sizes of the quadrature sub-domain and influence domain on the dynamic properties are investigated. The numerical results show that the presented method can give quite accurate results for the elastic dynamic problem of the moderately thick plate.

The analysis of composite laminated beams using a 2D interpolating meshless technique

Laminated composite materials are widely implemented in several engineering constructions. For its relative light weight, these materials are suitable for aerospace, military, marine, and automotive structural applications. To obtain safe and economical structures, the modelling analysis accuracy is highly relevant. Since meshless methods in the recent years achieved a remarkable progress in computational mechanics, the present work uses one of the most flexible and stable interpolation meshless technique available in the literature—the Radial Point Interpolation Method(RPIM).Here, a 2 D approach is considered to numerically analyse composite laminated beams. Both the meshless formulation and the equilibrium equations ruling the studied physical phenomenon are presented with detail. Several benchmark beam examples are studied and the results are compared with exact solutions available in the literature and the results obtained from a commercial finite element software. The results show the efficiency and accuracy of the proposed numeric technique.

Analysis of large deformation geotechnical problems using implicit generalized interpolation material point method

This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit material point method(iMPM).The global stiffness matrix is formed explicitly and the Newton-Raphson iterative method is used to solve the equilibrium equations.Where possible,the implementation procedure closely follows standard finite element method(FEM)approaches to allow easy conversion of other FEM codes.The generalized interpolation function is assigned to eliminate the inherent cell crossing noise within conventional MPM.For the first time,the B-bar approach is used to overcome volumetric locking in standard GIMP method for near-incompressible non-linear geomechanics.The proposed i GIMP was tested and compared with i MPM and analytical solutions via a 1 D column compression problem.Results highlighted the superiority of the i GIMP approach in reducing stress oscillations,thereby improving computational accuracy.Then,elasto-plastic slope stabilities and rigid footing problems were considered,further illustrating the ability of the proposed method to overcome volumetric locking due to incompressibility.Results showed that the proposed i GIMP with B-bar approach can be used to simulate geotechnical problems with large deformations.

The choosing of reproducing kernel particle shape function with mathematic proof

Many mechanical problems can be induced from differential equations with boundary conditions; there exist analytic and numerical methods for solving the differential equations. Usually it is not so easy to obtain analytic solutions. So it is necessary to give numerical solutions. The reproducing kernel particle （RKP） method is based on the Carlerkin Meshless method. According to the Sobolev space and Fourier transform, the RKP shape function is mathematically proved in this paper.

Sensitivity analysis of composite laminated plates with bonding imperfection in Hamilton system

Sensitivity analysis of composite laminated plates with bonding imperfection is carried out based on the radial point interpolation method （RPIM） in a Hamilton system. A set of hybrid governing equations of response and sensitivity quantities is reduced using the spring-layer model and the modified Hellinger-Reissner （H-R） variational principle. The analytical method （AM）, the semi-analytical method （SAM）, and the finite difference method （FDM） are used for sensitivity analysis based on the reduced set of hybrid governing equations. A major advantage of the hybrid governing equations is that the convolution algorithm is avoided in sensitivity analysis. In addition, sensitivity analysis using this set of hybrid governing equations can obtain response values and sensitivity coefficients simultaneously, and accounts for bonding imperfection of composite laminated plates.

On the Factors Affecting the Accuracy and Robustness of Smoothed-Radial Point Interpolation Method

In order to overcome the possible singularity associated with the Point Interpolation Method(PIM),the Radial Point Interpolation Method(RPIM)was proposed by G.R.Liu.Radial basis functions(RBF)was used in RPIM as basis functions for interpolation.All these radial basis functions include shape parameters.The choice of these shape parameters has been and stays a problematic theme in RBF approximation and interpolation theory.The object of this study is to contribute to the analysis of how these shape parameters affect the accuracy of the radial PIM.The RPIM is studied based on the global Galerkin weak form performed using two integration technics:classical Gaussian integration and the strain smoothing integration scheme.The numerical performance of this method is tested on their behavior on curve fitting,and on three elastic mechanical problems with regular or irregular nodes distributions.A range of recommended shape parameters is obtained from the analysis of different error indexes and also the condition number of the matrix system.All resulting RPIM methods perform very well in term of numerical computation.The Smoothed Radial Point Interpolation Method(SRPIM)shows a higher accuracy,especially in a situation of distorted node scheme.

MESHLESS METHOD OF DUAL RECIPROCITY HYBRID RADIAL BOUNDARY NODE METHOD FOR ELASTICITY

Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.

Analysis of antisym metric cross-ply laminates using high-order shear deformation theories:a meshless approach

For many years finite element method(FEM)was the chosen numerical method for the analysis of composite structures.However,in the last 20 years,the scientific community has witnessed the birth and development of several meshless methods,which are more flexible and equally accurate numerical methods.The meshless method used in this work is the natural neighbour radial point interpolation method(NNRPIM).In order to discretize the problem domain,the NNRPIM only requires an unstructured nodal distribution.Then,using the Voronoi mathematical concept,it enforces the nodal connectivity and constructs the background integration mesh.The NNRPIM shape functions are constructed using the radial point interpolation technique.In this work,the displacement field of composite laminated plates is defined by high-order shear deformation theories.In the end,several antisymmetric cross-ply laminates were analysed and the NNRPIM solutions were compared with the literature.The obtained results show the efficiency and accuracy of the NNRPIM formulation.