NURBS CURVE INTERPOLATOR WITH ADAPTIVE ACCELERATION-DECELERATION CONTROL

The feedrate profile of non-uniform rational B-spline （NURBS） interpolation due to the contour errors is analyzed. A NURBS curve interpolator with adaptive acceleration-deceleration control is presented. In interpo- lation preprocessing, the sensitive zones of feedrate variations are processed with acceleration-deceleration control. By using the proposed algorithm, the machining accuracy is guaranteed and the feedrate is adaptively adjusted to he smoothed. The mechanical shock imposed in the servo system is avoided by the first and the second time derivatives of feedrates. A simulation of NURBS interpolation is given to demonstrate the validity and the effectiveness of the algorithm. The proposed interpolator can also be applied to the trajectory planning of the other parametric curves.

Design and Implementation of a Novel Area-Efficient Interpolator

This paper presents the design considerations and implementation of an area-efficient interpolator suitable for a delta-sigma D/A converter. In an effort to reduce the area and design complexity, a method for designing an FIR filter as a tapped cascaded interconnection of identical subfilters is modified. The proposed subfilter structure further minimizes the arithmetic number. Experimental results show that the proposed interpolator achieves the design specification,exhibiting high performance and hardware efficiency,and also has good noise rejection capability. The interpolation filter can be applied to a delta-sigma DAC and is fully functional.

Analysis and Design of a Phase Interpolator for Clock and Data Recovery

In this paper,a detailed analysis of a phase interpolator for clock recovery is presented. A mathematical model is setup for the phase interpolator and we perform a precise analysis using this model. The result shows that the output amplitude and linearity of phase interpolator is primarily related to the difference between the two input phases. A new encoding pattern is given to solve this problem. Analysis in the circuit domain was also undertaken. The simulation results show that the relation between RC time-constant and time difference of input clocks affects the linearity of the phase interpolator. To alleviate this undesired effect, two adjustable-RC buffers are added at the input of the PI. Finally,a 90nm CMOS phase interpolator,which can work in the frequency from 1GHz to 5GHz,is proposed. The power dissipation of the phase interpolator is lmW with a 1.2V power supply. Experiment results show that the phase interpolator has a monotone output phase and good linearity.

Intelligent NURBS Interpolator Based on the Adaptive Feedrate Control

To satisfy the need for high-speed and high-accuracy machining of NURBS curve. Firstly the form of NURBS curve is analyzed and Talor＇s expansion of the parameter u with respect to time t is used to obtain the algorithm of the first order approximation interpolation. Secondly, based on the algorithm of the controlled chord error interpolator, an intelligent interpolation algorithm of the adaptive feedrate control is proposed. According to the actual machining capacity of machine tools, this algorithm uses look-ahead method, which dispenses with the complicated computation of the end point estimation of NURBS curve, to analyze the curve segment required by the maximum deceleration distance. Thus, the feedrate could decrease in advance and vary with the curvature and the variation ratio of curvature, which makes machining motion quite smooth. Not only could high accuracy and fine surface quality be achieved during high-speed machining, but also the overload of cutter tools is avoided on comers. Finally, in order to facilitate the calculation of interpolation, the dynamic matrix representation and efficient algorithm of curvature computation of the NURBS curve are presented,

An Optimal Feed Interpolator Based on G^2 Continuous Bézier Curves for High-Speed Machining of Linear Tool Path

A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of tangency and curvature, huge number of line segments, and short lengths of line segments. These disadvantages hinder the development of high speed machining. To smooth the linear tool path and improve machining efficiency of short line segments, this paper presents an optimal feed interpolator based on G^2 continuous Bézier curves for the linear tool path. First, the areas suitable for fitting are screened out based on the geometric characteristics of continuous short segments (CSSs). CSSs in every area are compressed and fitted into a G^2 Continuous Bézier curve by using the least square method. Then a series of cubic Bézier curves are generated. However, the junction between adjacent Bézier curves is only G^0 continuous. By adjusting the control points and inserting Bézier transition curves between adjacent Bézier curves, the G^2 continuous tool path is constructed. The fitting error is estimated by the second-order Taylor formula. Without iteration, the fitting algorithm can be implemented in real-time environment. Second, the optimal feed interpolator considering the comprehensive constraints (such as the chord error constraint, the maximum normal acceleration, servo capacity of each axis, etc.) is proposed. Simulation and experiment are conducted. The results shows that the proposed method can generate smooth path, decrease the amount of segments and reduce machining time for machining of linear tool path. The proposed research provides an effective method for high-speed machining of complex 2-D/3-D profiles described by short line segments.

Development of FPGA Based NURBS Interpolator and Motion Controller with Multiprocessor Technique

The high-speed computational performance is gained at the cost of huge hardware resource,which restricts the application of high-accuracy algorithms because of the limited hardware cost in practical use.To solve the problem,a novel method for designing the field programmable gate array(FPGA)-based non-uniform rational B-spline(NURBS) interpolator and motion controller,which adopts the embedded multiprocessor technique,is proposed in this study.The hardware and software design for the multiprocessor,one of which is for NURBS interpolation and the other for position servo control,is presented.Performance analysis and experiments on an X-Y table are carried out,hardware cost as well as consuming time for interpolation and motion control is compared with the existing methods.The experimental and comparing results indicate that,compared with the existing methods,the proposed method can reduce the hardware cost by 97.5% using higher-accuracy interpolation algorithm within the period of 0.5 ms.A method which ensures the real-time performance and interpolation accuracy,and reduces the hardware cost significantly is proposed,and it’s practical in the use of industrial application.

A Real-time NURBS Surface Interpolator for 5-axis Surface Machining

A real-time non-uniform rational B-spline （NURBS） surface interpolator is proposed and 5-axis machining method with a flat-end cutter is discussed. With the Taylor expansion and the coordinate transformation, the algorithms of NURBS interpolation, cutter effective machining radius, cutter offsetting and.inverse kinematics are deduced and implemented, respectively. Different from the conventional free-form surface machining, the proposed interpolator can real-time generate the motion commands of computer numerical control （CNC） machines with CC feedrate, rather than that of CL. An example part surface is demonstrated and the results of simulation show that the proposed method can be applied in actual 5-axis surface machining.

Study on Real-time Look-ahead and Adaptive Parametric Curve Interpolator

The principle of real-time look-ahead was introduced and analysed. An adaptive parametric curve interpolator with a real-time look-ahead function was developed for non-uniform rational B-spline (NURBS) curves interpolation, which considering the maximum acceleration/deceleration of the machine tool. In order to deal with the acceleration/deceleration around the feedrate sensitive corners, the look-ahead function was designed and illustrated. It can detect and adjust the feedrate adaptively. With the help of real-time look-ahead, the acceleration/deceleration can be limited to the range of the machine tool capacity. Thus, feedrate fluctuation is reduced. A NURBS curve interpolation experiment was provided to verify the feasibility and advantages of the proposed interpolator with a real-time look-ahead function.

LOOK-AHEAD ALGORITHM FOR VELOCITY CONTROL BASED ON PARAMETERIZED CURVE INTERPOLATOR

To avoid suffering gouge and transient overshooting in high speed cutting machining, a novel parametefized curve interpolator model with velocity look-ahead algorithm is proposed. Based on a prearrangement step interpolation algorithm for parameterized curves and considering high curvature points, parameterized curve tool path is divided into acceleration segments and deceleration segments by look-ahead algorithm. Under condition of characteristics of acceleration and deceleration stored in control system, deceleration before high curvature points and acceleration after high curvature points are realized in real-time in high speed cutting machining. Based on new parameterized curve interpolator model with velocity look-ahead algorithm, a real cubic spline is machined simulativly. The simulation results show that velocity look-ahead algorithm improves velocity changing more smoothly.

A Universal Approach to Designing an Image Interpolator with an Image Smoothing Filter

A number of conventional interpolation techniques have been proposed. However, it seems that there do not exist good criteria for the design of optimal linear interpolators. Also, such an interpolator can hardly provide a satisfactory solution for interpolating noisy images. In this paper, the novelty of this research is that a universal approach is proposed to design an image interpolator with any one image smoothing filter, thereby not only interpolating a down-sampled image but also preserving the characteristics of the performing filtering.

A Phase Interpolator CDR with Low-Voltage CML Circuits

In this paper, a phase interpolator clock and data recovery （CDR） with low-voltage current mode logic （CML） latched, buffers, and muxes is presented. Because of using the CML circuits, the CDR can operate in a low supply voltage. And the original swing of the differential inputs and outputs is less than that of the CMOS logic. The power supply voltage is 1.2 V, and the static current consumption is about 20 mA. In this phase interpolator CDR, the charge pump and loop filter are replaced by a digital filter. And this structure offers the benefits of increased system stability and faster acquisition.

Realization Methodology of a 5-axis Spline Interpolator in an Open CNC System

By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.

Image Interpolation via Gaussian-Sinc Interpolators with Partition of Unity

In this paper,we propose a novel image interpolation method by using Gaussian-Sinc automatic interpolators with partition of unity property.A comprehensive comparison is made with classical image interpolation methods,such as the bicubic interpolation,Lanczos interpolation,cubic Schaum interpolation,cubic B-spline interpolation and cubic Moms interpolation.The experimental results show the effectiveness of the improved image interpolation method via some image quality metrics such as PSNR and SSIM.

Novel Investigation of Stochastic Fractional Differential Equations Measles Model via the White Noise and Global Derivative Operator Depending on Mittag-Leffler Kernel

Because of the features involved with their varied kernels,differential operators relying on convolution formulations have been acknowledged as effective mathematical resources for modeling real-world issues.In this paper,we constructed a stochastic fractional framework of measles spreading mechanisms with dual medication immunization considering the exponential decay and Mittag-Leffler kernels.In this approach,the overall population was separated into five cohorts.Furthermore,the descriptive behavior of the system was investigated,including prerequisites for the positivity of solutions,invariant domain of the solution,presence and stability of equilibrium points,and sensitivity analysis.We included a stochastic element in every cohort and employed linear growth and Lipschitz criteria to show the existence and uniqueness of solutions.Several numerical simulations for various fractional orders and randomization intensities are illustrated.

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming(ISF)in industrial field.As a novel approach,the interpolator method is a promising strategy to enhance the surface quality in ISF.However,the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood.In this paper,the influences of process variables(i.e.tool diameter,step size and thickness of interpolators)on the forming process(e.g.surface roughness,forming force and geometric error)are investigated through a systematic experimental approach of central composite design(CCD)in two-point incremental sheet forming(TPIF).It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path.Nevertheless,the combined influence between thickness of interpolators and process parameters(tool diameter and step size)is limited.Meanwhile,the placement of interpolator has little influence on the effective forming force of blank.In addition,the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter.Finally,the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of thecontact pressure due to the increase of contact area with the unchanged contact force.Meanwhile,the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.

Suitable region of dynamic optimal interpolation for efficiently altimetry sea surface height mapping

The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compared with the linear optimal interpolation(LOI)method,the DOI method can improve the accuracy of gridded ADT locally but with low computational efficiency.Consequently,considering both computational efficiency and accuracy,the DOI method is more suitable to be used only for regional applications.In this study,we propose to evaluate the suitable region for applying the DOI method based on the correlation between the absolute value of the Jacobian operator of the geostrophic stream function and the improvement achieved by the DOI method.After verifying the LOI and DOI methods,the suitable region was investigated in three typical areas:the Gulf Stream(25°N-50°N,55°W-80°W),the Japanese Kuroshio(25°N-45°N,135°E-155°E),and the South China Sea(5°N-25°N,100°E-125°E).We propose to use the DOI method only in regions outside the equatorial region and where the absolute value of the Jacobian operator of the geostrophic stream function is higher than1×10^(-11).

An Enhanced Integrated Method for Healthcare Data Classification with Incompleteness

In numerous real-world healthcare applications,handling incomplete medical data poses significant challenges for missing value imputation and subsequent clustering or classification tasks.Traditional approaches often rely on statistical methods for imputation,which may yield suboptimal results and be computationally intensive.This paper aims to integrate imputation and clustering techniques to enhance the classification of incomplete medical data with improved accuracy.Conventional classification methods are ill-suited for incomplete medical data.To enhance efficiency without compromising accuracy,this paper introduces a novel approach that combines imputation and clustering for the classification of incomplete data.Initially,the linear interpolation imputation method alongside an iterative Fuzzy c-means clustering method is applied and followed by a classification algorithm.The effectiveness of the proposed approach is evaluated using multiple performance metrics,including accuracy,precision,specificity,and sensitivity.The encouraging results demonstrate that our proposed method surpasses classical approaches across various performance criteria.

Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling

Textured surfaces with certain micro/nano structures have been proven to possess some advanced functions,such as reducing friction,improving wear and increasing wettability.Accurate prediction of micro/nano surface textures is of great significance for the design,fabrication and application of functional textured surfaces.In this paper,based on the kinematic analysis of cutter teeth,the discretization of ultrasonic machining process,transformation method of coordinate systems and the cubic spline data interpolation,an integrated theoretical model was established to characterize the distribution and geometric features of micro textures on the surfaces machined by different types of ultrasonic vibration-assisted milling(UVAM).Based on the theoretical model,the effect of key process parameters(vibration directions,vibration dimensions,cutting parameters and vibration parameters)on tool trajectories and microtextured surface morphology in UVAM is investigated.Besides,the effect of phase difference on the elliptical shape in 2D/3D ultrasonic elliptical vibration-assisted milling(UEVAM)was analyzed.Compared to conventional numerical models,the method of the cubic spline data interpolation is applied to the simulation of microtextured surface morphology in UVAM,which is more suitable for characterizing the morphological features of microtextured surfaces than traditional methods due to the presence of numerous micro textures.The prediction of surface roughness indicates that the magnitude of ultrasonic amplitude in z-direction should be strictly limited in 1D rotary UVAM,2D and 3D UEVAM due to the unfavorable effect of axial ultrasonic vibration on the surface quality.This study can provide theoretical guidance for the design and fabrication of microtextured surfaces in UVAM.

Integer multiple quantum image scaling based on NEQR and bicubic interpolation

As a branch of quantum image processing,quantum image scaling has been widely studied.However,most of the existing quantum image scaling algorithms are based on nearest-neighbor interpolation and bilinear interpolation,the quantum version of bicubic interpolation has not yet been studied.In this work,we present the first quantum image scaling scheme for bicubic interpolation based on the novel enhanced quantum representation(NEQR).Our scheme can realize synchronous enlargement and reduction of the image with the size of 2^(n)×2^(n) by integral multiple.Firstly,the image is represented by NEQR and the original image coordinates are obtained through multiple CNOT modules.Then,16 neighborhood pixels are obtained by quantum operation circuits,and the corresponding weights of these pixels are calculated by quantum arithmetic modules.Finally,a quantum matrix operation,instead of a classical convolution operation,is used to realize the sum of convolution of these pixels.Through simulation experiments and complexity analysis,we demonstrate that our scheme achieves exponential speedup over the classical bicubic interpolation algorithm,and has better effect than the quantum version of bilinear interpolation.

Digital cancellation of multi-band passive inter-modulation based on Wiener-Hammerstein model

Utilizing multi-band and multi-carrier techniques enhances throughput and capacity in Long-Term Evolution(LTE)-Advanced and 5G New Radio(NR)mobile networks.However,these techniques introduce Passive Inter-Modulation(PIM)interference in Frequency-Division Duplexing(FDD)systems.In this paper,a novel multi-band Wiener-Hammerstein model is presented to digitally reconstruct PIM interference signals,thereby achieving effective PIM Cancellation(PIMC)in multi-band scenarios.In the model,transmitted signals are independently processed to simulate Inter-Modulation Distortions(IMDs)and Cross-Modulation Distortions(CMDs).Furthermore,the Finite Impulse Response(FIR)filter,basis function generation,and B-spline function are applied for precise PIM product estimation and generation in multi-band scenarios.Simulations involving 4 carrier components from diverse NR frequency bands at varying transmitting powers validate the feasibility of the model for multi-band PIMC,achieving up to 19 dB in PIMC performance.Compared to other models,this approach offers superior PIMC performance,exceeding them by more than 5 dB in high transmitting power scenarios.Additionally,its lower sampling rate requirement reduces the hardware complexity associated with implementing multi-band PIMC.