A continuous loading push-out test technique was used to measure the interfacial shear strength of SiC fiber reinforced Ti matrix composites. The interfacial shear strength of samples as-fabricated and after heat expo...A continuous loading push-out test technique was used to measure the interfacial shear strength of SiC fiber reinforced Ti matrix composites. The interfacial shear strength of samples as-fabricated and after heat exposed at 700 and 800℃ for 50 h was successfully determined. It has been found that the interfacial shear strength of the specimen exposed at 700℃ was higher than that of as-prepared and exposed samples at 800℃. The shear strength of the as-prepared samples was about 112.45 MPa, and increased to about 153.77 MPa after heat-treating at 700℃ for 50 h, but decreased to 133.11 MPa after treating at 800℃ for 50 h. Scanning electron microscope （SEM） was used to investigate the interfacial morphology of the samples. The brittle phase was the main products of interface for samples exposed at 800℃, and the interface was easily peeled off.展开更多
Ni-based superalloy K465 is brazed with BNi-2 filler metal by vacuum electron beam brazing （VEBB）. In process of VEBB, effects of processing primary parameters on shear strength of joints are investigated. Microstru...Ni-based superalloy K465 is brazed with BNi-2 filler metal by vacuum electron beam brazing （VEBB）. In process of VEBB, effects of processing primary parameters on shear strength of joints are investigated. Microstructure of the brazed joint with BNi-2 filler metal is studied by means of scanning electron microscopy （ SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD）. The results show that the structure of brazed seam consists of a large amount of Ni- based γ solid solution, Ni3Al （ γ＇） , Ni3B, WB, CrB, and a small quantity of WC, NbC, The maximum shear strength of the joint is 398 MPa when the beam current of welding is 2.6 mA, heating time is 480 s and focused current is 1 800 mA.展开更多
文摘A continuous loading push-out test technique was used to measure the interfacial shear strength of SiC fiber reinforced Ti matrix composites. The interfacial shear strength of samples as-fabricated and after heat exposed at 700 and 800℃ for 50 h was successfully determined. It has been found that the interfacial shear strength of the specimen exposed at 700℃ was higher than that of as-prepared and exposed samples at 800℃. The shear strength of the as-prepared samples was about 112.45 MPa, and increased to about 153.77 MPa after heat-treating at 700℃ for 50 h, but decreased to 133.11 MPa after treating at 800℃ for 50 h. Scanning electron microscope （SEM） was used to investigate the interfacial morphology of the samples. The brittle phase was the main products of interface for samples exposed at 800℃, and the interface was easily peeled off.
基金Supported by the National Natural Science Foundation of China (50871086)the Doctoral Foundation of Educational Ministry of China (20030699013)the Doctoral Innovation Foundation of Northwestern Polytechnical University
文摘Ni-based superalloy K465 is brazed with BNi-2 filler metal by vacuum electron beam brazing （VEBB）. In process of VEBB, effects of processing primary parameters on shear strength of joints are investigated. Microstructure of the brazed joint with BNi-2 filler metal is studied by means of scanning electron microscopy （ SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD）. The results show that the structure of brazed seam consists of a large amount of Ni- based γ solid solution, Ni3Al （ γ＇） , Ni3B, WB, CrB, and a small quantity of WC, NbC, The maximum shear strength of the joint is 398 MPa when the beam current of welding is 2.6 mA, heating time is 480 s and focused current is 1 800 mA.
